Deutsch dropdown-ico

Bedienungsanleitung Buffalo WLI-CB-AG108HP

43 Seiten 10.15 mb
Download

Zur Seite of 43

Summary
  • Buffalo WLI-CB-AG108HP - page 1

    User Manual AirStation Dual A&G Draft-N Wireless Notebook Adapter WLI-CB-AG108HP v1.0 ...

  • Buffalo WLI-CB-AG108HP - page 2

    2 Thanks for buying the WLI-CB-AG108HP Wireless CardBus Client. This wireless notebook adaptor lets you connect your notebook PC to wireless networks that follow the wireless a, wireless b, or wireless g standards. We hope you enjoy using it as much as we did making it. System Requirements • A compatable A, B, or G band access point. • A PC run ...

  • Buffalo WLI-CB-AG108HP - page 3

    3 Don’t insert the AirStation card into your computer’s cardbus slot yet. First, install the drivers: • Insert the AirNavigator CD into the CD-ROM drive of your computer. The AirNavigator Setup Wizard should launch automatically. • To launch the AirNavigator Setup Wizard manually, click Start , then Run . Type “ D: Setup.exe ”, where D ...

  • Buffalo WLI-CB-AG108HP - page 4

    4 • Select Install Wireless Drivers . Installing Wireless Drivers ...

  • Buffalo WLI-CB-AG108HP - page 5

    5 • Click Next to install a driver for the CardBus. • Select Agree and click Next . • A window will appear prompting you to insert the Wireless CardBus Adapter. Firmly insert the AirStation Card into a CardBus slot on your notebook. Installing Wireless Drivers ...

  • Buffalo WLI-CB-AG108HP - page 6

    6 • When the ‘Found New Hardware Wizard’ launches, click Next to run the wizard. • If the ‘Digital Signature Not Found’ page opens, click Yes . • When the Wireless CardBus Adapter is successfully installed, click Finish . Restart your computer if prompted. Installing Wireless Drivers ...

  • Buffalo WLI-CB-AG108HP - page 7

    7 Connecting Wireless Clients to your Network Buffalo supports three different methods for connecting your wireless client device to your network. If your AP supports it, use the simple, utterly secure AOSS to connect. Install the Client Manager from your AirNavigator CD (next page) and then turn to page 10. You may also use the Client Manager soft ...

  • Buffalo WLI-CB-AG108HP - page 8

    8 Client Manager can be used to survey and connect to available access points, congure WPA/WEP encryption, and create connection proles. Note: When Client Manager is installed, Windows XP Wireless Zero Conguration is automatically disabled. Installing Client Manager Insert the AirNavigator CD into the CD- ROM drive of you computer. If the ...

  • Buffalo WLI-CB-AG108HP - page 9

    9 Client Manager • Once the Client Manager Installer launches, click Next . • Press Agree to accept the license agreement and continue installation. ...

  • Buffalo WLI-CB-AG108HP - page 10

    10 • Click OK when Client Manager installation is complete. • Press Exit Setup to exit AirNavigator. • Client Manager is now installed and running in your systray. Right-click on its icon (the black antenna) to use it. • Turn to pages 11 - 13 for instructions on using AOSS to automatically congure your network. Turn to page 14 for instru ...

  • Buffalo WLI-CB-AG108HP - page 11

    11 The AOSS button for this wireless client is in its Client Manager software. Start Client Manager by right clicking on the black antenna icon in your System Tray, or by launching the Client Manager from your Start Menu: Programs >> Buffalo >>AirStation Utility >> Client Manager. AOSS (AirStation One-Touch Secure System) is a sim ...

  • Buffalo WLI-CB-AG108HP - page 12

    12 • From the Status Screen, select the Proles tab. • Initiate AOSS by clicking the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear. • Now, press the AOSS button on the Access Point. Hold it down until the AOSS LED begins to ash. Using AOSS ...

  • Buffalo WLI-CB-AG108HP - page 13

    13 Once AOSS is complete (about 30 seconds), the connection is archived as a prole for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner. Notes: AOSS will scan for an AOSS partner for about two minutes. If it times out before nding one, just press the AOSS buttons again. Output power is reduce ...

  • Buffalo WLI-CB-AG108HP - page 14

    14 You may use Client Manager to congure your wireless network. Client Manager consists of the Status page, the Survey page, and the Proles page. You can access each page by clicking the corresponding button on Client Manager. In addition to these pages, several dialog boxes are also available. You can access the Edit Prole dialog box, New ...

  • Buffalo WLI-CB-AG108HP - page 15

    15 Client Manager Configuration • Network Type - Displays whether network is in Ad-Hoc or Infrastructure mode. • Rate – The speed of communication between wireless devices. If the Client Manager is not connected to a remote wireless device (access point or another client), no rate will be displayed. • Channel – The channel that the two wi ...

  • Buffalo WLI-CB-AG108HP - page 16

    16 Click the Scan tab to open this page. Here, you can survey the area, display available access points, and connect to available access points. This page includes the following components: • Wireless SSID – The SSID is the “name” of a wireless network. Each wireless device on a network must use identical SSIDs to successfully communicate. ...

  • Buffalo WLI-CB-AG108HP - page 17

    17 This dialog will open for you to enter any necessary encryption information. The correct encryption type should already be selected automatically in the Encryption Method drop down list. Only change this setting if necessary. The Encryption Key is where the actual key for the wireless network should be entered. Some wireless networks allow you t ...

  • Buffalo WLI-CB-AG108HP - page 18

    18 Profiles Page Click the Proles tab to open this page. Use this page to access your proles. Proles allow you to save the information associated with a specic wireless network so you can quickly and easily connect to that network when you are in that location. The Proles page allows you to add, delete, and edit your proles, as we ...

  • Buffalo WLI-CB-AG108HP - page 19

    19 New Profile Dialog Box • Select Profile – Select whether the prole is for a wireless or wired connection. • Profile Name – Enter the name you want to associate with the new prole. • Network Type – Select the network mode you want to associate with the new prole. Select Infrastructure if your network consists of both wired an ...

  • Buffalo WLI-CB-AG108HP - page 20

    20 Advanced Profile Options • Network Tab – Displays the network information tab. A static IP can be specied for this wireless prole here. It is not recommended to change any of these settings unless specied by an administrator. • Browser Tab – Displays settings to change your browser preferences for this wireless prole. A speci ...

  • Buffalo WLI-CB-AG108HP - page 21

    21 Wi nd ow s XP i nc lu de s th e Ze ro C on g ur at io n Se rv ic e, a bu il t in s er rv ic e to c on g ur e yo ur w ir el es s cl ie nt s fr om wi th in W in do ws . T ur n to p ag e 7 if y ou w ou ld r at he r us e Bu ff al o’ s Cl ie nt M an ag er t o co n gu re y ou r wi re le ss c li en t. • If the Wireless Zero Configuration S ...

  • Buffalo WLI-CB-AG108HP - page 22

    22 • Click the Advanced tab to enter an SSID network name or WEP/WPA encryption key if necessary. To add an SSID network name that is not listed, click Add . Zero Configuration Service ...

  • Buffalo WLI-CB-AG108HP - page 23

    23 • To congure a WEP/WPA encryption key, select the wireless network and click Congure . • From the pull down menu, select the Network Authentication and Data Encryption types for the wireless network. Enter and conrm the Network Key and Key Index. Click OK when nished. Zero Configuration Service ...

  • Buffalo WLI-CB-AG108HP - page 24

    24 Wireless Zero Configuration Wireless Zero Configuration Service (Windows XP) Windows XP offers the Wireless Zero Conguration Service to support 802.11b and 802.11g wireless networking. This service automatically polls the area for available wireless access points. If an available wireless access point is found, Windows attempts to connect to ...

  • Buffalo WLI-CB-AG108HP - page 25

    25 Antenna Information The WLI-CB-AG108HP includes built- in antennas that allow it to connect to 802.11a, 802.11b, or 802.11g networks. External antennas cannot be attached to the WLI-CB-AG108HP. ...

  • Buffalo WLI-CB-AG108HP - page 26

    26 Specifications Wireless LAN Interface Standards Compliance IEEE 802.11a IEEE 802.11g IEEE 802.11b Communication Protocol Direct Sequence Spread Spectrum (DSSS) Orthogonal Frequency Division Multiplexing (OFDM) Frequency Range 2.412 - 2.472 GHz; 5.180 - 5.320 GHz Transmission Rate 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps (Auto) 802.11g: 6, 9, 1 ...

  • Buffalo WLI-CB-AG108HP - page 27

    27 Troubleshooting / FAQ What should I do if I already have a version of Client Manager on my PC? Update your Client Manager to the version on the CD. If you do not update your Client Manager, there could be a loss of functionally, as some older versions of Client Manager will not work properly with the G300N Wireless Notebook Adapter. Before updat ...

  • Buffalo WLI-CB-AG108HP - page 28

    28 10BaseT or 100BaseTx: 802.3 based Eth- ernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling. Ad-Hoc Network: The wireless network based on a peer-to-peer c ...

  • Buffalo WLI-CB-AG108HP - page 29

    29 DNS (Domain Name System): System used to map readable machine names into IP addresses Driver: Software that interfaces a computer with a specic hardware device. DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth. DTE (Data Terminal Equipment): Device that con10BaseT or 100BaseTx: 802.3 ...

  • Buffalo WLI-CB-AG108HP - page 30

    30 Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identies the intended recipient station. DHCP (Dynamic Host Configuration Protocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device connected to it, and retrieves the address when the device becomes ...

  • Buffalo WLI-CB-AG108HP - page 31

    31 IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. IP (Internet Protocol) Address: A unique 32-binary-digit number that identies each sender or receiver of information sent in packets. Infrastructure: A wireless network or other small network in which t ...

  • Buffalo WLI-CB-AG108HP - page 32

    32 LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. MAC (Medium Access Control) Address: A unique number that distinguishes network cards. Mbps (Mega Bits Per Second): A measurement of millions of bits per second. MDI/X (Media Dependent Interface/Cross- over): Port on a network hub or switch t ...

  • Buffalo WLI-CB-AG108HP - page 33

    33 Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is online. Plug and Play: Hardware that, once installed (“plugged in”), can immediately be used (“played”), as opposed to hardware that requires manual conguration. PoE (Power over Ethernet): A mechanism to send DC power to a device us ...

  • Buffalo WLI-CB-AG108HP - page 34

    34 Server: Any computer that makes les or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Transfer Protocol): The protocol used to dene and deliver electronic mail (E-mail) from one location to another. SNMP (Simple Network Management Protocol: An application layer protocol that outlines t ...

  • Buffalo WLI-CB-AG108HP - page 35

    35 UDP (User Datagram Protocol): A communication method (protocol) that offers a limited amount of service when messages are exchanged between computers in a network. UDP is used as an alternative to TCP/IP. Uplink: Link to the next level up in a communication hierarchy. UTP (Unshielded Twisted Pair) cable: Two or more unshielded wires twisted toge ...

  • Buffalo WLI-CB-AG108HP - page 36

    36 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and ca ...

  • Buffalo WLI-CB-AG108HP - page 37

    37 FCC RF Radiation Exposure Statement: This equ ipment comp lies with FCC RF radi ation expos ure limits se t for th for an uncontr olled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with ...

  • Buffalo WLI-CB-AG108HP - page 38

    38 Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ens ...

  • Buffalo WLI-CB-AG108HP - page 39

    39 EU countries not intended for use None Potential restrictive use This device is a 2.4 and 5 GHz wireless LAN transceiver, intended for indoor home and ofce use in all EU and EFTA member states, except in France, Belgium and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authoriti ...

  • Buffalo WLI-CB-AG108HP - page 40

    40 Warranty Information Buffalo products come with a 2-year limited warranty from the date of purchase. Buffalo Technology warrants products in good operating condition for the warranty period. This warranty does not include non-Buffalo Technology installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technolo ...

  • Buffalo WLI-CB-AG108HP - page 41

    41 Contact Information North America (USA / Canada) ADDRESS Buffalo Technology (USA), Inc. 4030 West Braker Lane, Suite 120 Austin, TX 78759-5319 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 Toll-free: 800-456-9799 Fax: 512-794-8520 Email: sales@buffalotech.com TECHNICAL SUPPORT North American Technical Support by ...

  • Buffalo WLI-CB-AG108HP - page 42

    42 Contact Information Europe ADDRESS Buffalo Technology UK LTD 176, Buckingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Tel: +44 (0) 1753 555000 Fax: +44 (0) 1753 535420 E-mail: sales@buffalo-technology.com TECHNICAL SUPPORT European Technical Support is available between the hours of 9am-6pm (GMT) Monday to Thursday and ...

  • Buffalo WLI-CB-AG108HP - page 43

    43 At Bu f f a lo Tech nol og y , we c ons t a ntly upd ate ou r sof t wa re a nd  r mwa re. F or t he most re cent soft wa r e, r mwa re, d r iver , a nd te ch n ica l white paper r elea ses ava i lable, please v isit t he Bu f f a lo Technolog y website: w w w.bu f f a l ot ech .com . Contact Information ...

Produzent Buffalo Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Buffalo WLI-CB-AG108HP erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Buffalo
- Bedienungsanleitungen WLI-CB-AG108HP
- Produktkarten Buffalo
- Informationsbroschüren
- oder Energieetiketten Buffalo WLI-CB-AG108HP
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Buffalo WLI-CB-AG108HP.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Buffalo WLI-CB-AG108HP, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Buffalo WLI-CB-AG108HP. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Buffalo WLI-CB-AG108HP ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Buffalo WLI-CB-AG108HP, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Buffalo WLI-CB-AG108HP hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Buffalo WLI-CB-AG108HP verständlich ist.

Eine gänzliche Bedienungsanleitung von Buffalo sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Buffalo WLI-CB-AG108HP bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Buffalo WLI-CB-AG108HP befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Buffalo WLI-CB-AG108HP, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Buffalo WLI-CB-AG108HP - die uns die ersten Schritte während der Nutzung von Buffalo WLI-CB-AG108HP erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Buffalo WLI-CB-AG108HP hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Buffalo WLI-CB-AG108HP im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Buffalo WLI-CB-AG108HP?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Buffalo WLI-CB-AG108HP nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Buffalo WLI-CB-AG108HP hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)