Bedienungsanleitung Jacuzzi S198

20 Seiten 0.34 mb
Download

Zur Seite of 20

Summary
  • Jacuzzi S198 - page 1

    Affinity ™ Owner's Manual ...

  • Jacuzzi S198 - page 2

    Note: This is a professional grade product. A knowledge of construction techniques, plumbing and electrical installation according to codes are required for proper installation and user satis- faction. We recommend that a licensed contractor perform the installation of all Jacuzzi Whirlpool Bath products. Our warranty does not cover improper instal ...

  • Jacuzzi S198 - page 3

    Contents Specifications & Rough-in Reference _____________________________________________________ 2 Framing and Support _________________________________________________________________ 3 Wall Cutout & CD/Radio Installation ______________________________________________________ 4-5 TV Installation __________________________________________ ...

  • Jacuzzi S198 - page 4

    Specifications & Rough-in Reference DIMENSIONS 68" (1727 mm) L 68" (1727 mm) W 22" ( 559 mm) H1 27" ( 686 mm) H2 35-7/8" ( 911 mm) H3 DRAIN/OVERFLOW DIMENSIONS 19" (483 mm) A 12" (305 mm) B TOTAL WEIGHT/FLOOR LOADING 1500 lb (682 kg)/ 47 lb/sq. ft. (229 kg/sq. m) OPERATING GALLONAGE 120 U.S. gal (455 liters) P ...

  • Jacuzzi S198 - page 5

    Framing and Support The drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor . The floor structure beneath the bath must be able to support a total weight of bath, water , and bather . Refer to the table under total weight for your model. The unit must be supported from the bottom of the bat ...

  • Jacuzzi S198 - page 6

    W all Cutout and CD/Radio Installation The installation requires a cutout in the wall. The cutout allows room for the speakers, CD/Radio speaker/power & TV audio cable wires. NOTE: CD/Radio must be must be located a minimum of 5' away from the interior of the bath. The cable provided with the unit is designed for this minimum distance. If ...

  • Jacuzzi S198 - page 7

    Remove trim plate. Remove sleeve after disengaging sleeve locks. Stand the unit and insert the 2 handles between the unit and sleeve to disengage the sleeve locks. When standing the unit be careful not to damage the fuse on the rear. Remove the sleeve. Retain the handles for future use. Run wires through sleeve. Insert sleeve into build out. When f ...

  • Jacuzzi S198 - page 8

    TV Installation Remove back cover by lifting straight upward and then remove the drip shield. Tighten cable tie and cut off excess. Tighten cable tie with anchor (not supplied) to the TV power cord. It is not necessary to attach anchor to drip shield; the cable tie and anchor are used to ensure the TV power cord remains in the TV housing. Locate bl ...

  • Jacuzzi S198 - page 9

    Service Access For partially or fully sunken installations, allow for ac- cess to service connections. It is the installer's respon- sibility to provide sufficient service access. See Ser- vice Access illustration. Provide adequate ventilation (minimum 30 square inch opening) for cooling the mo- tor and to supply sufficient air for the jets. E ...

  • Jacuzzi S198 - page 10

    Drain Information A drain/overflow assembly must be installed on the bath, water tested, and connected to the sanitary system of the house. After opening the carton, inspect for dam- age and verify that the kit is of the proper finish. In the Jacuzzi Whirlpool Bath drain/overflow kit, note that the waste flange, strainer , overflow cover and cover ...

  • Jacuzzi S198 - page 11

    9 Remote Control LED INDICA TOR BA TH MODE CHANNEL UP & DOWN JETS FUNCTION LIGHT FUNCTION TV MODE VOLUME UP & DOWN CD/DVD FUNCTION BLOWER FUNCTION POWER The Floating Remote Control is a universal remote control that has been programmed to operate the TV . If the remote has been deprogrammed the following procedure will reprogram the remote: ...

  • Jacuzzi S198 - page 12

    PURGES Automatic Purge With all functions off either , manually or by program, a 60 minute timer will be initiated. Once this timer is fin- ished, a 1 minute purge will be activated (blower) to purge any remaining water in the air channel. If any key is pressed the purge timer will be reset. Daily Purge If the user holds the button on the bath cont ...

  • Jacuzzi S198 - page 13

    Controlling Whirlpool Action The whirlpool action in your bath is influenced by three factors – direction of flow , force of water , and force of air . Direction: To change the direction of the water flow , swivel the jet nozzle to the desired angle. The jets can be directed individually toward any location on your body to provide a hydromassage. ...

  • Jacuzzi S198 - page 14

    BA TH MAINTENANCE Cleaning the Bath To clean your bath, simply use a mild, nonabrasive liq- uid detergent solution. Y ou can protect and restore the gloss to a dulled acrylic surface by applying Meguiar's #10 Mirror Glaze, a product specifically designed for use on acrylic finishes. If Meguiar's is not available, an acrylic polish of equa ...

  • Jacuzzi S198 - page 15

    Lamp When the bulb burns out, replace it from the back of the lamp fitting, on the underside of the shell, by pulling out the bulb receptacle. Replacement bulbs (7W , 12V) are available from your Jacuzzi Whirlpool Bath dealer . LIGHT BULB LIGHT BEZEL SHELL BULB RECEPT ACLE LOCKING NUT LIGHT BULB REPLACEMENT Printed in the U.S.A. Printed on Recycled ...

  • Jacuzzi S198 - page 16

    14 ...

  • Jacuzzi S198 - page 17

    53 mm 182 mm TEMPLA TE FOR CD/RADIO MOUNTING SLEEVE 15 ...

  • Jacuzzi S198 - page 18

    ...

  • Jacuzzi S198 - page 19

    WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Designer Collection Bath Product (“unit”) who purchases the product for personal or single family use (“user”). The Company will repair or replace, at its option, the unit or its ...

  • Jacuzzi S198 - page 20

    RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility. In ...

Produzent Jacuzzi Kategorie Hot Tub

Dokumente, die wir vom Produzenten des Geräts Jacuzzi S198 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Jacuzzi
- Bedienungsanleitungen S198
- Produktkarten Jacuzzi
- Informationsbroschüren
- oder Energieetiketten Jacuzzi S198
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Jacuzzi S198.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Jacuzzi S198, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Jacuzzi S198. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Jacuzzi S198 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Jacuzzi S198, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Jacuzzi S198 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Jacuzzi S198 verständlich ist.

Eine gänzliche Bedienungsanleitung von Jacuzzi sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Jacuzzi S198 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Jacuzzi S198 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Jacuzzi S198, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Jacuzzi S198 - die uns die ersten Schritte während der Nutzung von Jacuzzi S198 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Jacuzzi S198 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Jacuzzi S198 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Jacuzzi S198?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Jacuzzi S198 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Jacuzzi S198 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)