Deutsch dropdown-ico

Bedienungsanleitung AMX NXA-WAP250G

52 Seiten 2.94 mb
Download

Zur Seite of 52

Summary
  • AMX NXA-WAP250G - page 1

    Operation/Reference Guide Control System Accessories NXA-WAP250G 802.11 b/g Wireless Access Point for Modero Touch Panels Last Revised: 5/30/2007 ...

  • AMX NXA-WAP250G - page 2

    AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under n ormal use for three (3) years from the date of purchase fr om AMX, with the following exceptions: • Electroluminescent and LCD Control P ane ls are warranted for three (3) years, except for the display and touch overlay componen ...

  • AMX NXA-WAP250G - page 3

    Table of Contents i NXA-WAP250G 802.11b/g Wireless Access Point Table of Contents Compliances ....................... ................................................................................ 1 Federal Communication Commission In t erference Statement ........................ .......... 1 IMPORTANT NOTE: FCC Radiation Exposu re Statement ... ...

  • AMX NXA-WAP250G - page 4

    ii NXA-WAP250G 802.11b/g Wireless Access Point Table of Contents Information - Network ............... ............. ................ ................ ............. ................ .......... 25 Information - Event Log ................ ............. ................ ............. ................ ................. ...... 25 System Setting ... .... ...

  • AMX NXA-WAP250G - page 5

    Compliances 1 NXA-WAP250G 802.11b/g Wireless Access Point Compliances Federal Communication Commiss ion Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are desi gned to provide reasonable protection against harmful interferenc ...

  • AMX NXA-WAP250G - page 6

    Compliances 2 NXA-WAP250G 802.11b/g Wireless Access Point EC Conformance Declaration Marking by the abov e symbol indicates complianc e with the Essential Requirements of the R&TTE Directiv e of the European Union (1999/5/EC). This equipment meets the following conformance standards:  EN 60950-1 (IEC 60950-1) - Product Safety  EN 300 328 ...

  • AMX NXA-WAP250G - page 7

    NXA-WAP250G 3 NXA-WAP250G 802.11b/g Wireless Access Point NXA-WAP250G Overview AMX's new NXA-W AP250G 802.11b/g Wireless Access Point ( FG2255-50 ) provides both high performance and increased security to support all of AMX's G4 Modero wireless touch panels. The NXA-W AP250G (FIG. 1) provides con venient WLAN access for of f ice/home comp ...

  • AMX NXA-WAP250G - page 8

    NXA-WAP250G 4 NXA-WAP250G 802.11b/g Wireless Access Point Power Connector The access point does not hav e a power switch. It is po wered on when connected to the A C po wer adapter , and the po wer adapter is connected to a power source. The po wer adapter automatically adjusts to any v oltage between 100-240 volts at 50 or 60 Hz. No voltage range ...

  • AMX NXA-WAP250G - page 9

    Installation 5 NXA-WAP250G 802.11b/g Wireless Access Point Installation Overview T o install the Access Point, follow these steps: 1. Select a Site – Choose a proper place for the access point. For optimum performance, consider these points:  Mount the acc ess point as high as possible above an y obstructions in the coverage area. A void mount ...

  • AMX NXA-WAP250G - page 10

    Installation 6 NXA-WAP250G 802.11b/g Wireless Access Point Access Point Configuration The access point can be configured by connecting a PC to its Ethernet port and accessing the web interface. The default IP address of the access point is 192. 168.1.240, with login user name “ Admin” and default password “ 1988 ”. Twisted-Pair Cable Assign ...

  • AMX NXA-WAP250G - page 11

    Installation 7 NXA-WAP250G 802.11b/g Wireless Access Point Hardware Description FIG. 7 sho ws the layout of the W AP250G connectors and components. Reset Button Overview The Reset Button (sho wn in FIG. 7) is used to e ither restart the W AP250G or restore the unit to its factory default settings.  If you hold do wn the button for less than 5 se ...

  • AMX NXA-WAP250G - page 12

    Installation 8 NXA-WAP250G 802.11b/g Wireless Access Point Diagnosing Access Point Indicators Symptom Action POWER LED is Off • AC power adapter may be disconnected. Check connections between the access point, the power adapter , and the wall outlet. LAN LED is Off • V erify that the access point and attached device are powered on. • Be sure ...

  • AMX NXA-WAP250G - page 13

    Initial Configuration 9 NXA-WAP250G 802.11b/g Wireless Access Point Initial Configuration The NXA-W AP250G offers a user-friendly web-based manage ment interface for the configuration of all the unit’ s features. Any PC directly attached to the unit can access the management interface using a web browser , such as Internet Explorer (version 6.0 o ...

  • AMX NXA-WAP250G - page 14

    Initial Configuration 10 NXA-WAP250G 802.11b/g Wireless Access Point Access Point Mode - Roaming A wireless network can also support roaming for mobile users (FIG. 2). Multiple NXA-W AP250Gs can be placed so that a continuous cov erage area is created. W ireless users within this area can mov e freely and remain connected to the network. All NXA-W ...

  • AMX NXA-WAP250G - page 15

    Initial Configuration 11 NXA-WAP250G 802.11b/g Wireless Access Point Access Point Mode - Repeater and Bridge Mode The NXA-W AP250G ca n also operate in a “repeater and bridge” mode to extend the range of links to wireless clients (FIG. 3). The NXA-W AP250G uses W ireless Distribution System (WDS) to forw ard traf fic between the repeater and th ...

  • AMX NXA-WAP250G - page 16

    Initial Configuration 12 NXA-WAP250G 802.11b/g Wireless Access Point Logging into the Web Interface In the web browser’ s address bar, type the default IP address: http://192.168.1.240 . The web browser displays the NXA-W A P250G’ s login page. The User ID is fixed as “ Admin ” (case-sensitiv e), and the default password is “ 19 88 ” (F ...

  • AMX NXA-WAP250G - page 17

    Initial Configuration 13 NXA-WAP250G 802.11b/g Wireless Access Point Using the Setup Wizard There are only a few basic steps you need to set up the NXA-W AP250G and provide a connection for your AMX Control Panel and network access for other wireless de v ices. The Setup W i zard takes you through conf iguration procedures for the general network s ...

  • AMX NXA-WAP250G - page 18

    Initial Configuration 14 NXA-WAP250G 802.11b/g Wireless Access Point Step 2: Networ k Setting The options on this page allow you to set the NXA-W AP250G’ s IP address assignment method and configures the local Dynamic Host Conf iguration Protocol (DHCP) server and Network Address T ranslation (N A T) settings (FIG. 7). There are three basic metho ...

  • AMX NXA-WAP250G - page 19

    Initial Configuration 15 NXA-WAP250G 802.11b/g Wireless Access Point  Static IP — The IP address is assigned manually by the user . This ma y be required if your NXA-W AP250G is co nnected to a home gateway router or other de vice that does not support a DHCP serv er (FIG. 10).  If you select Static IP , enter an appro priate IP address and ...

  • AMX NXA-WAP250G - page 20

    Initial Configuration 16 NXA-WAP250G 802.11b/g Wireless Access Point  Also enter the IP address for th e Domain Name Serv er (DNS) to be used for host-name to IP address resolution. DHCP Server/NAT Setting The NXA-W AP250G includes a DHCP server that can assign IP addresses to any wireless de vic e. Addresses are assigned from a common address p ...

  • AMX NXA-WAP250G - page 21

    Initial Configuration 17 NXA-WAP250G 802.11b/g Wireless Access Point  WP A -PSK Ke y — Enter as an easy-to-reme mber form of letters and numbers. The key must be from 8 to 63 charac ters, which can include spac es (FIG. 13). Click Next to proceed. FIG. 12 Setup Wizard - Wireless VAP #1 Setting (WEP settings) FIG. 13 Setup Wizard - Wireless VAP ...

  • AMX NXA-WAP250G - page 22

    Initial Configuration 18 NXA-WAP250G 802.11b/g Wireless Access Point Step 4: Wireless VAP #2 Setting The options on this page allow you to set the wireless Service Set Identifier (SS ID) and wireless security encryption key for the V AP#2 wireless netw ork (FIG. 14). Enter the SSID, or wireless network name, which all wireless stations must use to ...

  • AMX NXA-WAP250G - page 23

    Initial Configuration 19 NXA-WAP250G 802.11b/g Wireless Access Point Finish and Reboot 1. Click Finish (FIG. 15). 2. Click the Reboot button to restart the NXA-W AP250G. Rebooting of the NXA-W AP200G can take up to 90 seconds. FIG. 15 Setup Wizard - Wizard configuration done The NXA-WAP250G will start using any configured new IP settings, which mus ...

  • AMX NXA-WAP250G - page 24

    Initial Configuration 20 NXA-WAP250G 802.11b/g Wireless Access Point ...

  • AMX NXA-WAP250G - page 25

    System Configuration 21 NXA-WAP250G 802.11b/g Wireless Access Point System Configuration The NXA-W AP250G’ s basic settings can be configured using the Setup Wizard, as described in the previous chapter , “Initial Configuration. ” Howe ver , for some installations, you may need to configure specific settings that are not a v ailable in the Se ...

  • AMX NXA-WAP250G - page 26

    System Configuration 22 NXA-WAP250G 802.11b/g Wireless Access Point Information The Information pages display deta ils on the current configuration and status of the W AP250G, including associated wireless stations and ev ent log messages (FIG. 17). Configuration Options (Cont.) Menu Descri ption Page Wireless V AP 1, 2 (Wireless V AP 2 is only ava ...

  • AMX NXA-WAP250G - page 27

    System Configuration 23 NXA-WAP250G 802.11b/g Wireless Access Point Information - System The System Information page (FIG. 18) displays basic system configuration settings, as well as the settings for each wireless interface. The items on this page include: AP System Configuration : Displays basic system configuration settings:  System Up T ime ...

  • AMX NXA-WAP250G - page 28

    System Configuration 24 NXA-WAP250G 802.11b/g Wireless Access Point  Multicast Cipher : The encryption used for broadcast and multicast data. Information - Cli ent The Client page (FIG. 19) displays details on wireless devices currently associated to the W AP250G. The items on this page include:  Station Address : The MA C address of the wire ...

  • AMX NXA-WAP250G - page 29

    System Configuration 25 NXA-WAP250G 802.11b/g Wireless Access Point Information - Ne twork The Network page displays the cu rrent Dynamic Host Configuration Protocol (DHCP) client, DHCP server , and Point-to-Point Protocol ove r Ethernet (PPPoE) status (FIG. 20). The items on this page include:  DHCP Client Setting : Enables the W AP250G to auto ...

  • AMX NXA-WAP250G - page 30

    System Configuration 26 NXA-WAP250G 802.11b/g Wireless Access Point The Event Log page displays the last 128 messages l ogged in chronologica l order , from the newest to the oldest. Log messages saved in the W AP250G’ s memory are erased when the device is rebooted. System Setting The System Settin gs pages allow you to change the management acc ...

  • AMX NXA-WAP250G - page 31

    System Configuration 27 NXA-WAP250G 802.11b/g Wireless Access Point  Username : The name of the user . The default username is “ Admin” (case-sensitiv e) and is configurable.  New Password : The password for management access. (Length: 0 -32 characters, case sensitiv e)  Confirm New P assword : Enter the password again for verif icatio ...

  • AMX NXA-WAP250G - page 32

    System Configuration 28 NXA-WAP250G 802.11b/g Wireless Access Point System Setting - VAP Ma nagement The V AP Management page allows you to enable V AP management (FIG. 25). When V AP management is enabled, it tags traffic from V AP#1 as high priority and traf fic from V AP#2 as low priority . System Settings - Reset System The Reset System page (F ...

  • AMX NXA-WAP250G - page 33

    System Configuration 29 NXA-WAP250G 802.11b/g Wireless Access Point Wireless VAP Settings The W ireless V AP #1 Setting and W ireless V AP #2 Setting pages inc lude configuration options for radio signal characteristics and wireless secu rity features on the W AP25 0G (FIG. 27). The follo wing sections apply to both W ireless V AP #1 Setting and W ...

  • AMX NXA-WAP250G - page 34

    System Configuration 30 NXA-WAP250G 802.11b/g Wireless Access Point  SSID : The name of the wireless network service pr ovided b y the V AP . Clients that w ant to connect to the network must set their SSID to the same as that of the V AP interface. (Defaults: V AP #1 - AMX1 , V AP #2 - AMX2 ; Range = 1-32 characters).  Broadcast SSID : Enabl ...

  • AMX NXA-WAP250G - page 35

    System Configuration 31 NXA-WAP250G 802.11b/g Wireless Access Point The items on this page include:  A uto Channel Selection : Enables the W AP250G to automatica lly select an interference-free radio channel (default: Enabled ).  Radio Channel : The rad io channel that the W AP250G uses to communica te with wireless clients. When multiple W A ...

  • AMX NXA-WAP250G - page 36

    System Configuration 32 NXA-WAP250G 802.11b/g Wireless Access Point requesting authentication encrypts the challenge text and sends it back to the W AP250G. If the challenge text is encrypted correctly , the access point enables the requesting bridge to authenticate.  Shar ed authentication mode is less secure than Ope n due to the unencryp ted ...

  • AMX NXA-WAP250G - page 37

    System Configuration 33 NXA-WAP250G 802.11b/g Wireless Access Point Wireless VAP Settings - WPA / W PA2 Setting Wi-Fi Protected Access (WPA) employs a combination of technologies to provide an enhanced security solution for wireless networks. The WP A Pre-shared Key (WP A-PSK) mode for small networks uses a common password phrase that must be manua ...

  • AMX NXA-WAP250G - page 38

    System Configuration 34 NXA-WAP250G 802.11b/g Wireless Access Point  WP A -PSK Ke y : Enter a key as an easy- to-remember form of letters and numbers. The key must be from 8 to 63 characters, which can include spaces. All wireless clients must be configured with the same key to communicate with the V AP interface. Network Settings The W AP250G s ...

  • AMX NXA-WAP250G - page 39

    System Configuration 35 NXA-WAP250G 802.11b/g Wireless Access Point The items on this page include:  DHCP Client Setting : Enables the W AP250G to automatically obtain an IP address from a DHCP server . If a response is not receiv ed from the DHCP server , the W AP250G uses the fix ed IP settings as conf igured on this page. When set to disabled ...

  • AMX NXA-WAP250G - page 40

    System Configuration 36 NXA-WAP250G 802.11b/g Wireless Access Point  DHCP Serv er/NA T Setting : Enables or disables the DHCP server and N A T on the W AP250G. (Default: Enabled)  Start/End IP Address : Specifies the start/end IP address of a range that the DHCP server can assign to DHCP clients. Y ou can specify a single address or an addres ...

  • AMX NXA-WAP250G - page 41

    System Configuration 37 NXA-WAP250G 802.11b/g Wireless Access Point Network Settings - Radi us Server Setting Radius (Remote Authentication Dia l In User Service) is an authentic ation, authorization and accoun ting protocol for applications such as network access or IP mobility . It is intended to work in both local and roaming situations. Use the ...

  • AMX NXA-WAP250G - page 42

    System Configuration 38 NXA-WAP250G 802.11b/g Wireless Access Point Time and Log Use the options on the T ime S etting page (FIG. 37) to enable Simple Network T ime Protocol (SNTP). SNTP allows the W AP250G to set its internal cloc k based on periodic updates from a time server (SNTP or NTP). Maintaining an accurate time on the W AP250G enables all ...

  • AMX NXA-WAP250G - page 43

    System Configuration 39 NXA-WAP250G 802.11b/g Wireless Access Point The items on this page include:  SNTP Serv er Setting — Configures the W AP250G to o perate as an SNTP clien t. When enabled, the time server IP address must be specified.  Primary Server : The IP address of an SNTP or NTP time server that the W AP250G attempts to poll for ...

  • AMX NXA-WAP250G - page 44

    System Configuration 40 NXA-WAP250G 802.11b/g Wireless Access Point Upgrade via a Remote S erver The Remote F ile page allows you to download a ne w softwa re code file from a remote server to the W AP250G using FTP or TFTP (FIG. 41). When using an FTP or TFTP server , be sure to first obtain the IP address of the server and note the correct file p ...

  • AMX NXA-WAP250G - page 45

    System Configuration 41 NXA-WAP250G 802.11b/g Wireless Access Point  Start Upgrade — Starts the download process. Be sure to allow enough time for the download to complete before rebooting the W AP250G. When you have downloaded the software file, you must reboot the WAP250G to implement the new code. ...

  • AMX NXA-WAP250G - page 46

    System Configuration 42 NXA-WAP250G 802.11b/g Wireless Access Point ...

  • AMX NXA-WAP250G - page 47

    Appendix A: Troubleshooting 43 NXA-WAP250G 802.11b/g Wireless Access Point Appendix A: Troubleshooting Overview Check the following items before you contact local T ech nical Support. 1. If wireless clients cannot access the network, check the follo wing:  Be sure the NXA-W AP250G and the wireless clients are configured with the same Service Set ...

  • AMX NXA-WAP250G - page 48

    Appendix A: Troubleshooting 44 NXA-WAP250G 802.11b/g Wireless Access Point Step 3: Copy Fi rmware file 1. E-mail a copy of the f irmware f ile ZZ-IMG.BI N (Firmware f ile 1.0.4.6) to the dealer . 2. Copy the file into the C:TFTP-R OOT directory Step 4: Ethernet Conn ectivity 1. V erify the Ethernet port is enabled and connect an Ethernet c able fr ...

  • AMX NXA-WAP250G - page 49

    Appendix A: Troubleshooting 45 NXA-WAP250G 802.11b/g Wireless Access Point Step 7: Re-Con nect to WAP 250 G 1. Open a web browser and enter the IP Address for the W AP250G. 2. Follo w the Emergent Recov ery System on-screen prompts to begin the Firmware upload. FIG. 43 TFTP Server Configuration dialog ...

  • AMX NXA-WAP250G - page 50

    Appendix A: Troubleshooting 46 NXA-WAP250G 802.11b/g Wireless Access Point ...

  • AMX NXA-WAP250G - page 51

    Glossary 47 NXA-WAP250G 802.11b/g Wireless Access Point ...

  • AMX NXA-WAP250G - page 52

    5/07 © 2007 AMX. All rights reserved. AMX and the AM X logo are register ed trademarks of AMX. AMX reserves the ri ght to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • ...

Produzent AMX Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts AMX NXA-WAP250G erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen AMX
- Bedienungsanleitungen NXA-WAP250G
- Produktkarten AMX
- Informationsbroschüren
- oder Energieetiketten AMX NXA-WAP250G
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung AMX NXA-WAP250G.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen AMX NXA-WAP250G, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen AMX NXA-WAP250G. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts AMX NXA-WAP250G ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts AMX NXA-WAP250G, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von AMX NXA-WAP250G hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von AMX NXA-WAP250G verständlich ist.

Eine gänzliche Bedienungsanleitung von AMX sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von AMX NXA-WAP250G bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von AMX NXA-WAP250G befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich AMX NXA-WAP250G, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts AMX NXA-WAP250G - die uns die ersten Schritte während der Nutzung von AMX NXA-WAP250G erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit AMX NXA-WAP250G hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von AMX NXA-WAP250G im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich AMX NXA-WAP250G?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit AMX NXA-WAP250G nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit AMX NXA-WAP250G hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)