-
Symphonic SD7S3 - page 1
OWNER’S MANUAL If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1 - 800 - 242-7158 or visit our web site at http://www.funai-corp.com Please read before using this equipment. POWER CHANNEL PLAY STOP/EJECT VIDEO VCR AUDIO REW OPEN/CLOSE F .FWD PLAY FWD/SKIP STOP SKIP/REV REC VCR D ...
-
Symphonic SD7S3 - page 2
– 2 – EN 1L25 W ARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. LASER SAFETY This unit employs a laser . Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury . CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCE ...
-
Symphonic SD7S3 - page 3
– 3 – EN 1L25 IMPOR T ANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed W arnings - All warnings on the appliance and in the operating instructions should b ...
-
Symphonic SD7S3 - page 4
– 4 – EN 1L25 A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of all materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial nu ...
-
Symphonic SD7S3 - page 5
– 5 – EN 1L25 T ABLE OF CONTENTS ■ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3 ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Symphonic SD7S3 - page 6
– 6 – EN 1L25 FEA TURES Mode ¡ Dolby Digital sound This DVD/VCR COMBINA TION UNIT can output a Dolby Digital audio signal. ¡ P ause/fast/slow/step pla yback ¡ Random playbac k f or audio CD and MP3 ¡ Program pla ybac k for audio CD and MP3 ¡ D VD menus in a desired langua ge ¡ Screen saver/A uto po wer-off functions The screen saver progr ...
-
Symphonic SD7S3 - page 7
– 7 – EN 1L25 ABOUT THE DISCS The following discs can be played back on this DVD/VCR COMBINA TION UNIT . ¡ D VD video ¡ D VD-R/R W* (video f ormat) ¡ D VD+R/R W* (video f ormat) ¡ Au dio CD ¡ CD-R/R W* (audio CD f ormat) ¡ A udio CD with MP3 files* * Depending on the types or the writing method of the medium some discs can not be played b ...
-
Symphonic SD7S3 - page 8
– 8– EN 1L25 OPERA TING CONTROLS AND FUNCTIONS POWER CHANNEL PLAY STOP/EJECT VIDEO VCR AU DIO REW OPEN/CLOSE F. FW D PLAY FWD/SKIP STOP SKIP/REV REC VCR DVD PLAY DISC IN TIMER/REC OUTPUT DVD 1 2 3 4 7 68 23 25 22 24 20 21 18 17 16 15 14 13 12 11 10 5 9 19 FRONT P ANEL REMO TE CONTR OL SEARCH MODE + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SL ...
-
Symphonic SD7S3 - page 9
– 9 – EN 1L25 19. Remote Sensor Window 20. DISC IN Light (green) Light appears when a disc is in the DVD Player . 21. PLA Y Light (green) Light appears during Disc playback. 22. FWD/SKIP Button (D VD) [page 23] Press this button during playback to fast forward the Disc. Press this button in P AUSE mode to slow forward the Disc. Press to skip Ch ...
-
Symphonic SD7S3 - page 10
– 10 – EN 1L25 48. g Button ● D VD mode [page 23] Press to fast forward the Disc. Press P AUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the forward speed of slow motion. ● VCR mode [page 18] Press to rapidly advance the tape, or view the picture rapidly in forward during playback (Forward ...
-
Symphonic SD7S3 - page 11
– 11 – EN 1L25 LOADING THE BA TTERIES 1. Open the battery compartment cover . 2. Insert two AA batteries, with each one oriented correctly . 3. Close the cover . Notes ¡ Do not mix alkaline and manganese batteries. ¡ Do not mix old and new batteries. 62. D VD ANALOG A UDIO OUT Jacks Connect the supplied audio cables here and to the Audio In j ...
-
Symphonic SD7S3 - page 12
– 12 – EN 1L25 VCR/DVD SWITCHING Because this product is a combination of a VCR and DVD player , you must first select which component you wish to operate with the OUTPUT BUTTON. + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SLOW VCR/TV DISPLA Y PA USE PLA Y STOP RECORD ENTER RETURN TITLE MENU SETUP CLEAR/ C.R E SET ZOOM MODE A - B ANGLE SEARCH ...
-
Symphonic SD7S3 - page 13
– 13 – EN 1L25 CONNECTING TO A TV WITH A/V TERMINALS D VD/VCR VCR AUDIO OUT AUDIO IN VIDEO OUT VIDEO IN S-VIDEO OUT COMPONENT VIDEO OUT A UDIO OUT DVD Y Cb L Cr R ANT -IN ANT -OUT L R DIGIT AL A UDIO OUT COAXIAL To VIDEO OUT jack To VIDEO INPUT jack To Right (red) and Left (white) Antenna/Cable signal To ANT . IN of TV To A UDIO INPUT jacks To ...
-
Symphonic SD7S3 - page 14
– 14 – EN 1L25 D VD/VCR VCR AUDI O OUT A UDIO IN VIDEO OUT VIDEO IN S-VIDEO OUT COMPONENT VIDEO OUT A UDIO OUT DVD Y Cb L Cr R ANT -IN ANT -OUT L R DIGIT AL A UDIO OUT COAXIAL A/V -compatible or wide screen TV To COMPONENT VIDEO INPUT jacks To COMPONENT VIDEO OUT jacks To Right (red) and Left (white) A UDIO INPUT jacks To Right (red) and Left ( ...
-
Symphonic SD7S3 - page 15
– 15 – EN 1L25 CONNECTING TO A RECEIVER WITH DOLBY DIGIT AL DECODER If using this DVD/VCR COMBINA TION UNIT to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINA TION UNIT outputs a Dolby Digital data stream from its COAXIAL DIGIT AL AUDIO OUT jack. By hooking the DVD/VCR COMBINA TION UNIT up to a Dolby Digital receiver ...
-
Symphonic SD7S3 - page 16
6 After scanning, the tuner stops on the lo w- est memorized channel. The TV screen returns to TV mode. ¡ If “AUTO SET UP” appears on the TV screen again, check the cable connections. Press B once again and the VCR will begin preset again. – 16 – EN 1L25 AUTOMA TIC CHANNEL SET UP SETUP Y ou can automatically program the tuner to scan only ...
-
Symphonic SD7S3 - page 17
– 17 – EN 1L25 CLOCK SET UP 1 Select main menu b y pressing MENU . ¡ If the clock is not set, the CLOCK SET menu appears first. In this case, follow step [3]. 2 Select "CLOCK SET" by pressing K or L . Then, press B . 3 Set the cloc k. ¡ To go back one step, press s . 4 Start the clock b y pressing CLEAR/C.RESET or B . VCR CLOCK SET ...
-
Symphonic SD7S3 - page 18
PICTURE SEARCH If you want to skip or repeat a scene during playback, press D or E . ¡ Press it again and the VCR will now search at super high speed. (in the LP/SLP modes only). INDEX SEARCH An index mark will be assigned at the beginning of each recording you made. Y ou may skip to a specific marked point by following the steps below . 1 Press S ...
-
Symphonic SD7S3 - page 19
– 19 – EN 1L25 RECORDING FUNCTION It may be UNLA WFUL to record copy- righted material without the consent of the copyright owner . Accidental Erasure Pr evention To prevent accidental recording on a recorded cassette, remove its record safety tab. T o record on it later , cover the hole with cellophane tape. Before recor ding, make sure: ¡ Th ...
-
Symphonic SD7S3 - page 20
– 20 – EN 1L25 HINTS FOR TIMER RECORDING ¡ If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. VCR ¡ If a tape ends during TIMER RECORDING, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light blinks. (If the DVD powe ...
-
Symphonic SD7S3 - page 21
– 21 – EN 1L25 COPYING A VIDEO T APE SPECIAL FEA TURES Y ou can make copies of video tapes made by friends or relatives for your enjoyment. Y ou can not copy a DVD to a videotape. W arning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR (this unit), the playing VCR (another ...
-
Symphonic SD7S3 - page 22
– 22 – EN 1L25 BASIC PLA YBACK Getting started ¡ T urn on the power of the TV , amplifier and any other components which are connected to the DVD. ¡ Make sure the TV and audio receiver (commercially available) are set to the correct channel. ¡ Select DVD mode by pressing DVD on the remote control or OUTPUT on the front panel. 1 Press PO WER. ...
-
Symphonic SD7S3 - page 23
– 23 – EN 1L25 TITLE MENU 1 Press TITLE. ¡ The title menu will appear . 2 If the feature is not a vailable, symbol may appear on the TV screen. 3 Press Arro w ( L / K / s / B ) to select an item, and ENTER to confirm selection. DVD-V STEP BY STEP PLA YBACK 1 During playbac k, press P A USE. ¡ Playback will pause and sound will be muted. 2 The ...
-
Symphonic SD7S3 - page 24
– 24 – EN 1L25 TRACK There are three ways to begin playback on an Audio CD at a specific T rack. Using the Number buttons 1 Press the Number buttons to enter the desired T rack number . ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg. track 3, press 3). ¡ To play track 26, press +10, 2, ...
-
Symphonic SD7S3 - page 25
– 25 – EN 1L25 REPEA T REPEA T TITLE / CHAPTER To activate the repeat function, press REPEA T during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( current title repeat) (repeat off ) Notes ¡ Repeat T itle/C ...
-
Symphonic SD7S3 - page 26
– 26 – EN 1L25 RANDOM PLA YBACK This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE twice. ¡ RANDOM screen appears. 2 Press PLA Y to star t random playbac k. Note ¡ If you like to repeat the current track in the random selection, press REPEA T repeatedly until TRACK appears during playback ...
-
Symphonic SD7S3 - page 27
– 27 – EN 1L25 RANDOM PLA YBACK 1 Press MODE twice while playbac k is stopped. 2 Press PLA Y to play the tracks in random order . MP3 This feature allows you to program a mp3 disc to play in a desired sequence. 1 Press MODE during playbac k is stopped. ¡ The PROGRAM screen will appear . 2 Press Arro w ( K / L ) to select a track, then press EN ...
-
Symphonic SD7S3 - page 28
– 28 – EN 1L25 CHANGING THE ON-SCREEN DISPLA Y Y ou can check the information about the current disc by pressing DISPLA Y on the remote control. For DVD-Vs 1 Press DISPLA Y during playback to sho w current Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Press DISPLA Y again to show current Title . ...
-
Symphonic SD7S3 - page 29
– 29 – EN 1L25 CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back. ¡ Level 1 Only DVD software intended for children can be played back, with those intended for adult a ...
-
Symphonic SD7S3 - page 30
– 30 – EN 1L25 Adjust the Black Level Settings to make the black parts of the picture as bright as you preferred. 1 Press MODE during playbac k. 2 Press ENTER to switch ON/OFF . ON: Makes the dark parts brighter . OFF: Shows the original picture as recorded. 3 Press MODE twice or RETURN to exit. DVD-V BLACK LEVEL SETTING Y ou can enjoy stereoph ...
-
Symphonic SD7S3 - page 31
– 31 – EN 1L25 Language options are not available with some discs. 1 Press SETUP in ST OP mode. 2 Press B to select CUSTOM, then press ENTER. ¡ CUSTOM mode will appear . 3 Press Arro w ( s / B ) to select LANGU AGE, then press ENTER to confirm. 4 Press Arro w ( K / L ) to select the next items, then press ENTER. ¡ If you want to return to LAN ...
-
Symphonic SD7S3 - page 32
– 32 – EN 1L25 TROUBLESHOOTING GUIDE If the DVD/VCR COMBINA TION UNIT does not perform properly when operated as instructed in this Owner's Manual, check the player consulting the following checklist. V C R D V D V C R D V D PROBLEM CORRECTIVE ACTION No power . • Make sure the power plug is connected to an AC outlet. • Make sure the po ...
-
Symphonic SD7S3 - page 33
– 33 – EN 1L25 MAINTENANCE SERVICING ¡ Should your DVD/VCR COMBINA TION UNIT become inoperative, do not try to correct the prob- lem by yourself. There are no user -serviceable parts inside. T urn off, unplug the power cord, and please call our help line at 1-800-242-7158 to locate an Authorized Service Center . CLEANING THE CABINET ¡ Use a s ...
-
Symphonic SD7S3 - page 34
– 34 – EN 1L25 SPECIFICA TIONS Product type: DVD player with V ideo Cassette Recorder Discs: DVD video Audio CD V ideo Cassette tape Converter output: VHF Channel 3 or 4. Power source: 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption: 24 W (standby: 7.0 W) Operating temperature: 5°C to 40°C Dimensions: W 17-1/8” (435 mm) H 3-15/16” (99 ...
-
Symphonic SD7S3 - page 35
– 35 – SP 1L25 CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES POWER CHANNEL PLAY STOP/EJECT VIDEO VCR A UDIO REW OPEN/CLOSE F.FWD PLAY FWD/SKIP STOP SKIP/REV REC VCR DVD PLAY DISC IN TIMER/REC OUTPUT DVD 1 2 3 4 7 68 23 25 22 24 20 21 18 17 16 15 14 13 12 11 10 5 9 19 PA NEL DELANTER O P ANEL REMO T O SEARCH MODE + 123 456 789 01 0 SPEED AUDIO PO ...
-
Symphonic SD7S3 - page 36
– 36 – SP 1L25 25. Botón ST OP (D VD) Detiene la operación del disco. 26. Botón SPEED Presiona para seleccionar la velocidad de grabación de VCR (SP o SLP) 27. Botón PO WER Presione para conectar y desconectar la alimentación. 28. Botones numéricos ● Modo D VD Presiónelos para seleccionar elementos numerados en un menú. +10 Use este ...
-
Symphonic SD7S3 - page 37
– 37 – SP 1L25 D VD/VCR VCR A UDIO OUT A UDIO IN VIDEO OUT VIDEO IN S-VIDEO OUT COMPONENT VIDEO OUT A UDIO OUT DV D Y Cb L Cr R ANT -IN ANT -OUT L R DIGIT AL A UDIO OUT COAXIAL 66 65 64 63 62 61 57 56 58 59 60 VISIÓN TRASERA Presiónelo para iniciar la reproducción. 50. Botón VCR Presione antes de utilizar el control remoto para funciones de ...
-
Symphonic SD7S3 - page 38
– 38 – SP 1L25 CAMBIO DE VCR/DVD Debido a que este producto es una combinación de videograbadora y reproductor de DVD, debe seleccionar primero el equipo que desea hacer funcionar con el botón OUTPUT . POWER CHANNEL PLAY STOP/EJECT VIDEO VCR AU DIO REW OPEN/CLOSE F.F WD PLAY FWD/SKIP STOP SKIP/REV REC VCR DVD PLAY DISC IN TIMER/REC OUTPUT DVD ...
-
Symphonic SD7S3 - page 39
– 39 – SP 1L25 CONECT ANDO A UN TV QUE TIENE TOMA DE ENTRADA DE S- VÍDEO o T OMAS DE ENTRADA DE VÍDEO COMPONENTE CONEXION A UN TV CON TERMINALES A/V CONEXION A UN TV SIN TERMINALES A/V 1. Desconecte el cordón de alimentación AC del toma de corriente AC. 2. Desconecte la antena o cable del TV . 3. Conecte la antena o cable a la toma ANT .IN ...
-
Symphonic SD7S3 - page 40
– 40 – SP 1L25 PREP ARACIÓN DE RELOJ 1 Seleccione el menú principal mediante el botón MENU . ¡ Si el reloj no ha sido ajustado, el menú AJUSTE DE RELOJ aparece primero. En este caso, siga el paso [3]. 2 Seleccione “AJUSTE DE RELOJ” mediante el botón K ó L . Después, presione B . 3 Ajuste el reloj. ¡ Para retroceder un paso presione ...
-
Symphonic SD7S3 - page 41
– 41 – EN 1L25 MEMO H94A3UD.QX3 03.8.20 11:44 AM Page 41 ...
-
Symphonic SD7S3 - page 42
– 42 – EN 1L25 MEMO H94A3UD.QX3 03.8.20 11:44 AM Page 42 ...
-
Symphonic SD7S3 - page 43
– 43 – EN 1L25 MEMO H94A3UD.QX3 03.8.20 11:44 AM Page 43 ...
-
Symphonic SD7S3 - page 44
0VMN03844 H94A3UD ★★★★★ Printed in China FUNAI CORPORA TION LIMITED W ARRANTY FUNAI CORP . will repair this product, free of charge in the USA in the event of defect in materials or workman- ship as follows: DURA TION: PA R TS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of orig ...
Haben Sie eine Frage bezüglich Symphonic SD7S3?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Symphonic SD7S3 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Symphonic SD7S3 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.