Deutsch dropdown-ico

Bedienungsanleitung Panasonic WV-NW474SE

35 Seiten 1.26 mb
Download

Zur Seite of 35

Summary
  • Panasonic WV-NW474SE - page 1

    Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No. WV -NW470S WV -NW474SE Colour CCTV Camera Operating Instructions 中  文 FRANÇAIS DEUTSCH ENGLISH ESP AÑOL IT ALIANO ...

  • Panasonic WV-NW474SE - page 2

    -2- WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. WARNING THIS APPARATUS MUST BE EARTHE ...

  • Panasonic WV-NW474SE - page 3

    -3- CONTENTS PREFACE ....................................................................................................................... ... 4 Features ...................................................................................................................... ... 4 System Requirements ................................................. ...

  • Panasonic WV-NW474SE - page 4

    -4- Features • 10/100BASE-T terminal enabling you to view camera images via the network • User/Host authentication • SD-II (Super Dynamic) expands the dynamic range up to 46 dB without interference between dark and bright portions in a scene. • High adaptability to environmental changes Auto light control (ALC) B/W and colour switching (AUT ...

  • Panasonic WV-NW474SE - page 5

    -5- • Ethernet is a registered trademark of Xerox Corporation. • Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners. • Distributing, copying, disassembling, reverse com- piling, reverse engineering, and also exporting in violation of export laws ...

  • Panasonic WV-NW474SE - page 6

    -6- 1. This product should be installed and connected in conformity with local codes by qualified serv- ice personnel or system installers. 2. Use a class 2 power source supplying 24 V AC. 3. To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera. 4. Be sure to use a ceiling boar ...

  • Panasonic WV-NW474SE - page 7

    -7- MAJOR OPERA TING CONTROLS & THEIR FUNCTIONS A B L E F T R IG H T U P D O W N SET LINK LED OFF LED ON RCV A B L EFT R IG HT U P D O W N SET LINK LED OFF LED ON RCV u i o !0 !1 !2 !3 !4 !5 !6 !7 !9 !8 t r q y w T ransport Protection Screws (Red) e q Tilting lock screw Fixes the tilting position. w Panning table Adjusts the panning angle of th ...

  • Panasonic WV-NW474SE - page 8

    -8- !7 Set button (SET) Validates the selection or opens a detailed menu. !8 DIP switch Specifies certain settings shown in the figure. The default setting is marked with an asterisk *. Note: The settings will be applied to the camera only when DIP SW, not MENU, is selected in the menu setup. !9 Monitor output jack Connects to the LCD monitor and o ...

  • Panasonic WV-NW474SE - page 9

    An example of flush mounting is shown. This example shows two boxes: one is for camera mounting and the other is for cable junction. 1. Procurement • Four screws Locally procure four bracket fixing screws suitable for the installation surface and structure of the wall/ceiling or junction box. • Junction box When planning to use a junction box(s ...

  • Panasonic WV-NW474SE - page 10

    -10- ■ Mounting the Camera Disassembling the Camera 1. Remove the dome cover by loosening the three tamper-proof screws with the supplied bit. 2. Remove the two red-coloured screws provided for transport protection with a Philips screwdriver. Note: Prior to installation, discharge static electricity by placing your hands on a metallic surface. Fa ...

  • Panasonic WV-NW474SE - page 11

    Copper wire size (AWG) Green/Yellow GND 220 V - 240 V AC Type •C able length and wire gauge 24 V AC Type The recommended cable length and thickness are shown in the table for reference. The voltage sup- plied to the power terminals of the camera should be between 19.5 V AC and 28 V AC . ● Power Connection Use individual power sources for the ca ...

  • Panasonic WV-NW474SE - page 12

    -12- ● Video Output Connection Connect the video output cable to the monitor or other system device with the procured coaxial cable. The maximum extensible length is shown in the table. ● Control Connector Connect the respective peripherals to supply and receive control signals. Use the supplied 5-pin cable adapter. For electrical ratings, refe ...

  • Panasonic WV-NW474SE - page 13

    -13- 3. Zoom • Unlock the zoom lever. • Move the lever to adjust the zoom. • Lock the lever. 4. Focus • Unlock the focus lever. • Move the lever to adjust the focus. • Lock the lever. 5. Reinstalling the dome cover • Attach the dome cover to the camera so that the two position marks match. • Tighten the three tamper-proof screws. Fo ...

  • Panasonic WV-NW474SE - page 14

    ● Connection to Internet (Type 3) The PC accesses the camera through the Internet and the DSL/CATV modem. Necessaries: • Straight-type network cable (Category 5) • CATV modem (cable modem) or DSL modem ● Connection to Internet (Type 4) A switching hub or a router may be added to type 3 connection. Necessaries: • Straight-type network cabl ...

  • Panasonic WV-NW474SE - page 15

    -15- ■ Network Setup of Y our PC To set up the network of the PC, first change the TCP/IP settings of the PC to match them to the default settings of the camera. The following are the default network settings of the camera. IP address : 192.168.0.10 Subnet mask : 255.255.255.0 Default gateway : 192.168.0.1 To access the camera, the IP address of ...

  • Panasonic WV-NW474SE - page 16

    -16- 7. Click the "Use the following IP address" radio button and enter the IP address and the subnet mask as follows. IP address : 192.168.0.9 Subnet mask : 255.255.255.0 8. Click the [OK] button, and the window dialog box closes. Note: Use a small sized picture when a blue picture appears instead of the live picture due to Internet traf ...

  • Panasonic WV-NW474SE - page 17

    -17- 5. Click the [Enable] button when using DHCP and DNS. When using the DNS functions, enter the "Primary DNS Server address" and the "Secondary DNS Server address". 6. Click [AUTO] when the DNS server gets primary and secondary IP addresses from the DHCP server. Notes: • If DHCP is enabled although there is no DHCP server i ...

  • Panasonic WV-NW474SE - page 18

    -18- 5. Enter "admin" in the user name line. Note: The default setting is "admin". The administra- tor should change the user name and password in the User Setup menu. 6. Click the [OK] button. The "Setup Menu" window opens. 7. Click the [Network] button. The "Network Setup" win- dow appears. 8. Enter paramet ...

  • Panasonic WV-NW474SE - page 19

    -19- This section describes the camera setup procedures common to accesses from the PC and from the camera. ■ Buttons Used for Setup Press the buttons inside the camera, or click the but- tons on the computer display. Each button is assigned functions in the setup as follows. q Menu ON/OFF button: Opens or closes the setup menu, w SET button: Val ...

  • Panasonic WV-NW474SE - page 20

    -20- 4. Click the Menu ON button to overlay the ** SET UP ** menu on the camera image. The cursor is highlighted on the window. 5. Move the cursor to SETUP DISABLE if it is dis- played, or skip to step 7 if ENABLE is displayed. 6. Click the SET button. DISABLE will change to ENABLE, and the camera is now ready to be set up. Note: While DISABLE is d ...

  • Panasonic WV-NW474SE - page 21

    -21- ■ Setup Menu T ree ** SET UP ** ** CAM SET UP ** ALC CAMERA ID AGC SHUTTER SYNC SENS UP MOTION DET WHITE BAL CAMERA ID ** ALC CONT ** MASK SET ** A WC ** ** MOTION DETECT ** A TW1 A TW2 CHROMA GAIN UPSIDE DOWN ** SPECIAL ** PEDEST AL AP SHARP EL-ZOOM BURST(B/W) BW CAMERA RESET MENU/DIP SW NET MASK IP ADDRESS ** NETWORK SETUP ** HTTP POR T NO ...

  • Panasonic WV-NW474SE - page 22

    Opening the camera setup menu ■ Camera Setup Menu (CAM SETUP) 1. Camera Identification (CAMERA ID) Setting You can assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on and off on the monitor screen. -22- SETTING PROCEDURES The following pages describe setting operations ...

  • Panasonic WV-NW474SE - page 23

    -23- To edit the CAMERA ID 1. Move the cursor to CAMERA ID. The factory default setting is OFF. 2. Press [SET]. The CAMERA ID menu appears. The cursor on the letter "0" is highlighted. 3. Move the cursor to the character you want to edit by pressing [Left]/[Right]/[Up]/[Down]. 4. After selecting the character, press [SET]. The selected ch ...

  • Panasonic WV-NW474SE - page 24

    -24- 3. Move the cursor to the area where backlight is bright and press [SET] to mask that area. The mask turns to white. (When the cursor is moved on an area that has already been masked, the mask and cursor start blinking.) 4. Repeat step 3 to mask the desired areas. To cancel masking, move the cursor to that area and press [SET]. 5. After maskin ...

  • Panasonic WV-NW474SE - page 25

    -25- 6. Synchronization Setting (SYNC) There are three synchronization modes: INT (internal), LL (line-lock), and VD2 (vertical drive). You can select the internal or line lock mode in the menu setup, but you cannot select VD2. The VD2 signal is supplied from an external device e.g., a Video Multiplexer, by being multiplexed on a coaxial cable, and ...

  • Panasonic WV-NW474SE - page 26

    -26- • Automatic White Balance Control Mode (AWC) In this mode, accurate white balance is obtained within a colour temperature range of approximately 2 300-10 000 K. 1. Move the cursor to WHITE BAL and select AWC → PUSH SW. 2. Press [SET] to start white balance setup. PUSH SW is highlighted to indicate that white balance is being set. 3. When t ...

  • Panasonic WV-NW474SE - page 27

    -27- • The camera will deactivate the detector for a few minutes after the power of the camera is turned on or the BW setting in the Special Menu is set to something other than OFF. • The motion detection function is not designed specifically for prevention of theft, fire, etc. 9. Menu/DIP SW Selection Some of the settings: picture upside down, ...

  • Panasonic WV-NW474SE - page 28

    -28- 7. Press [Up] or [Down], [Left] or [Right] to change the angular field of view. 8. To return to the EL-ZOOM setting menu, press [SET]. 10-6. BW This function lets you switch from colour to black-and- white picture automatically in low light conditions such as at night. 1. Move the cursor to BW. 2. Select AUTO1, AUTO2, EXT, ON or OFF using [Lef ...

  • Panasonic WV-NW474SE - page 29

    -29- ■ Network Setup (NETWORK SETUP) Set up network parameters when connecting the 10/100BASE jack with a network. Notes: • Access the setup menu from the PC to use the DHCP or DNS server, because these settings are not included in this window. • Ask your system administrator or ISP (Internet Service Provider) about available IP address, subn ...

  • Panasonic WV-NW474SE - page 30

    -30- You can reset the following data back to the factory default settings. Camera Setup Setup Menu (PC oriented) HTML files ■ Initializing the Camera Menu • Move the cursor to CAMERA RESET. • Hold down [Left], [Right], and [SET] buttons simulta- neously for 2 seconds on the camera, or click the All Reset button on your computer display. ■ ...

  • Panasonic WV-NW474SE - page 31

    -31- TROUBLESHOOTING Symptom No picture is displayed. HTML documents are not displayed. • Is the 24 V AC or 220 V - 240 V AC cable firmly connected? • Is the video cable or network cable connected properly? • HTML files in the camera might be broken. Initializing is required. 11 30 Cannot access the camera from the browser. • Are the networ ...

  • Panasonic WV-NW474SE - page 32

    -32- When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. PREVENTION OF BLOOMING AND SMEAR SPECIFICA TIONS Bright object Smear Network Section I ...

  • Panasonic WV-NW474SE - page 33

    -33- Control Function: Auxiliary Out: Collector-output, OFF (Open or 4 V DC – 5 V DC)/ ON ( ≤ 1 V 50 mA) Day/Night In: Pulled-up to 5 V DC, OFF (Open) / ON (0 V 0.2 mA) General Power Source 24 V AC 50 Hz (WV-NW474SE), 220 V - 240 V AC 50 Hz (WV-NW470S) Power Consumption: 24 V type: 8.6 W (Camera) 12.1 W (Optional heater unit) 220 V - 240 V type ...

  • Panasonic WV-NW474SE - page 34

    -34- ■ Optional Heater Unit WV -CW3HE ● Introduction Installing this heater unit enables the camera to operate under in a low-temperature environment of –30 °C (–22 °F). The heater turns on automatically when the temperature inside the camera drops below +10 °C (50 °F) and turns off when it rises. A small fan inside the unit will minimi ...

  • Panasonic WV-NW474SE - page 35

    Printed in Japan Gedruckt in Japan Imprimé au Japon Impreso en Japón Stampato in Giappone 2003 © Matsushita Electric Industrial Co., Ltd. All rights reserved. N0803-1103 3TR001929BAA 在日本印刷 ...

Produzent Panasonic Kategorie Security Camera

Dokumente, die wir vom Produzenten des Geräts Panasonic WV-NW474SE erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Panasonic
- Bedienungsanleitungen WV-NW474SE
- Produktkarten Panasonic
- Informationsbroschüren
- oder Energieetiketten Panasonic WV-NW474SE
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Panasonic WV-NW474SE.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Panasonic WV-NW474SE, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Panasonic WV-NW474SE. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Panasonic WV-NW474SE ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Panasonic WV-NW474SE, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Panasonic WV-NW474SE hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Panasonic WV-NW474SE verständlich ist.

Eine gänzliche Bedienungsanleitung von Panasonic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Panasonic WV-NW474SE bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Panasonic WV-NW474SE befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Panasonic WV-NW474SE, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Panasonic WV-NW474SE - die uns die ersten Schritte während der Nutzung von Panasonic WV-NW474SE erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Panasonic WV-NW474SE hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Panasonic WV-NW474SE im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Panasonic WV-NW474SE?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Panasonic WV-NW474SE nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Panasonic WV-NW474SE hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)