Bedienungsanleitung Ingersoll-Rand 150BMG

16 Seiten 1.58 mb
Download

Zur Seite of 16

Summary
  • Ingersoll-Rand 150BMG - page 1

    Form P6031 03524832 Edition 12 January 2011 Sav e These Instruc tions Air and Gas P ow ered Starter Series 150BMG Installation and Maintenanc e Inf ormation ...

  • Ingersoll-Rand 150BMG - page 2

    2 03524832_ed12 Product Safety Information Intended Use: The 150BMG Series Air starters are intended for use in starting reciprocating internal combustion engines . These starters are d esigned to be operated from a remot e location after proper installation on the engine requiring starting. For Additional inf ormation refer to Air Starters Product ...

  • Ingersoll-Rand 150BMG - page 3

    03524832_ed12 3 causing corrosion and icing in cold weather . If either of these conditions exist, the starter will not operate. After all connections have been made, check each joint with a soap bubble test, 7. Installation of a “ glad hand” for emergency repressurizing the system is recommended. T o keep the “glad hand” clean and free of ...

  • Ingersoll-Rand 150BMG - page 4

    4 03524832_ed12 1. Disconnect the 1/4” hose at the “OUT” por t on the Drive Housing, and plug the hole in the Drive Housing with a 1/4” pipe plug. 2. Remove the 3/8” pipe plug from the center of the Motor Housing Cover. 3. Engage the Drive Pinion with the flywheel by applying a minimum of 70 psig (4.8 bar/483kPa) to the “IN” port on t ...

  • Ingersoll-Rand 150BMG - page 5

    03524832_ed12 5 150BMG Series Air and Gas Starters Dimensional Drawing 3/8 -18 NPT Lube connection 18.03 12.34 3.56 3.25 2.00 Cover Motor Housing 8.69 2.46 Gear Case Drive Housing 3.25 4.44 72˚30’ 120˚ 120˚ R 2.359 Right Hand or Clockwise Rotation Left Hand or Counter Clockwise Rotation 6.0 Ø 5.25 Ø 3.624 Ø 4.718 R 1.25 1 1/4 -11 1/2 NPT In ...

  • Ingersoll-Rand 150BMG - page 6

    6 03524832_ed12 150BMG Series Air and Gas Starters T ypical Installation T orque (lb-f t) Pow er (HP) Flow (SCFM) Series 150BM and 150BMG Performance Curves 0 20 40 60 80 100 120 25 20 15 10 300 600 900 1200 50 0 500 1000 1500 Speed (RPM) 2000 2500 3000 Starter 3BM, 5BM 0-30’ # 12 (3/4 “) SRV 100 SRV 100 SRV 100 SRV 125 SRV 150 # 12 (3/4 “) # ...

  • Ingersoll-Rand 150BMG - page 7

    03524832_ed12 7 150BMG Series Air and Gas Starters Sec tional V iew 8 9 2 2 5 6 7 10 55 40 14 52 Air Strainer 53 51 54 55 39 38 37 36 35 56 34 33 32 1 11 30 31 27 24 23 22 21 19 20 15 19A 18 18A 16 13 12 (Dwg. TP A61-7) ...

  • Ingersoll-Rand 150BMG - page 8

    8 03524832_ed12 150BMG Series Air and Gas Starters Exploded V iew 2 5 18A 15 56 16 18 19A 19 34 21 33 22 23 24 27 30 20 32 31 6 2 1 55 7 9 8 10 13 40 11 39 37 36 35 12 14 55 38 (Dwg. TP A683-2) ...

  • Ingersoll-Rand 150BMG - page 9

    03524832_ed12 9 150BMG Series Air and Gas Starters Parts List Item Part Description Par t Number Item Part Description Part Number 1 Motor Housing Cover Assembly 150BMP-A102A 32 Drive Shaft 2 Housing Cover End Plug (3) HSPPS3 for Model E22RH5-020 10BM-108 * Nameplate 150BM-301 for Models C21RH-6, C21LH-11, 10BM-8 * Nameplate Screw (3) R4K-302 C21RH ...

  • Ingersoll-Rand 150BMG - page 10

    10 03524832_ed12 Maintenance Section WARNING Always wear eye protection when operating or performing an y maintenance on this Starter . Always turn o the air or Gas supply and disconnect the air supply hose before installing, removing or adjusting any ac cessory on this Starter or before performing any maintenance on this Starter . Note: When r ...

  • Ingersoll-Rand 150BMG - page 11

    03524832_ed12 11 Inspection of Parts 1. Discard all O-rings and gaskets. These should not be reused. 2. Check all grease seals. If they appear worn or distorted, remo ve them from their parent member and discard. NOTICE Discard any grease seal tha t was removed during disassembly of the starter . 3. Check all needle bearings. Discard any needle bea ...

  • Ingersoll-Rand 150BMG - page 12

    12 03524832_ed12 12. Set the Front End Plate (39), crescent g rooved side  rst, onto the Cylinder so that the Cylinder Do wel passes through the dowel hole in the End Plate . Make sure that all notches and ports are in alignment. 13. Install the Front Rotor Bearing (37) onto the splined shaft of the Rotor until it seats against the Fr ont End Pl ...

  • Ingersoll-Rand 150BMG - page 13

    03524832_ed12 13 Parts and Maintenance NOTICE The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decr eased starter per formance, and increased maintenance, and may in validate all warranties. Ingersoll Rand is not responsible for customer modi cation of starters for applications on which Ingersoll Rand ...

  • Ingersoll-Rand 150BMG - page 14

    Notes: ...

  • Ingersoll-Rand 150BMG - page 15

    Notes: ...

  • Ingersoll-Rand 150BMG - page 16

    ww w .ingersollrandproducts.com © 2011 Ingersoll Rand ...

Produzent Ingersoll-Rand Kategorie Remote Starter

Dokumente, die wir vom Produzenten des Geräts Ingersoll-Rand 150BMG erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Ingersoll-Rand
- Bedienungsanleitungen 150BMG
- Produktkarten Ingersoll-Rand
- Informationsbroschüren
- oder Energieetiketten Ingersoll-Rand 150BMG
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Ingersoll-Rand 150BMG.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Ingersoll-Rand 150BMG, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Ingersoll-Rand 150BMG. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Ingersoll-Rand 150BMG ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Ingersoll-Rand 150BMG, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Ingersoll-Rand 150BMG hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Ingersoll-Rand 150BMG verständlich ist.

Eine gänzliche Bedienungsanleitung von Ingersoll-Rand sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Ingersoll-Rand 150BMG bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Ingersoll-Rand 150BMG befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Ingersoll-Rand 150BMG, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Ingersoll-Rand 150BMG - die uns die ersten Schritte während der Nutzung von Ingersoll-Rand 150BMG erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Ingersoll-Rand 150BMG hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Ingersoll-Rand 150BMG im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Ingersoll-Rand 150BMG?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Ingersoll-Rand 150BMG nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Ingersoll-Rand 150BMG hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)