-
Sensormatic VM32 - page 1
System Op erator's Manual Vie w M an ager ® 32 with E nhanc ed T OUCH T RACKER ® 8000-2 655-01 ...
-
Sensormatic VM32 - page 2
V iew Manager ® 32 With Enhanced T OUCH T RACKER ® Operator ’ s Manual Version 1.0 A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F l i p V i e w P a t t e r n R e p e a t P a t t e r n S e q P r e v i o u s N e x t ...
-
Sensormatic VM32 - page 3
EQUIPMENT MODIFICATION CAUTION Equipment changes or m odifications not expressl y approved by Sensormat ic Electronics Corporati on, the party responsible for FCC compliance, could voi d the user's authority t o operate the equipment and could create a hazardous condition. FCC COMPLIANCE This equipment complies with Part 15 of the FCC rules fo ...
-
Sensormatic VM32 - page 4
Table of Contents BEFORE YOU BEGIN.................................................................................. VII How To Use This Manual .................................................................................................... viii Text Conventions ................................................................................... ...
-
Sensormatic VM32 - page 5
iv Operator's Manual CHAPTER 2: CONTROLLING MONITORS, CAMERAS, AND OUTPUT DEVICES ...................................................................................................... 2-1 Selecting Monitors ............................................................................................................. .2 - 2 Controlling Cameras. ...
-
Sensormatic VM32 - page 6
Table of Contents v CHAPTER 5: TOUCH TRACKER UTILITIES .............................................. 5-1 Selecting a Language......................................................................................................... 5- 2 Designating Primary versus Secondary T OUCH T RACKER .................................................. 5-2 Setti ...
-
Sensormatic VM32 - page 7
vi Operator's Manual ...
-
Sensormatic VM32 - page 8
Before You Begin This Operator's Manual provides detailed information about the features, operation, and application of your system. It explains, step-by-step, the tasks that you will perform when using the system. It is designed to be a continuing source of information and reference as you use your system. In This Chapter • How To Use This ...
-
Sensormatic VM32 - page 9
viii Operator’s Manual How To Use This Manual This manual is organized as follows: • Chapter 1, About Your New System , describes what your system does and how it is used. It also identifies the system's different modes of operation, provides a brief overview of the T OUCH T RACKER , and describes the equipment installed and used with your ...
-
Sensormatic VM32 - page 10
Before You Begin ix Text Conventions This book uses text in different ways to identify different kinds of information. italics used for terms specific to your system, and text that requires emphasis monospace used for LCD messages and prompts bold used for names of buttons on the keypad, for example, Seq Note Special notes are separated by ruled li ...
-
Sensormatic VM32 - page 11
x Operator’s Manual included with the multiplexer offers programm ing and operation information for that unit. • Some systems are connected to a VCR. The documentation included with the VCR offers programming and operation inform ation for that VCR. Contact your sales representative if you need additional copies of the Operator's Manual (o ...
-
Sensormatic VM32 - page 12
CHAPTER 1 About Your New System This chapter describes your new system and its features. It describes the T OUCH T RACKER and its modes of operation. It also provides an overview of the POS/EM Value system. In This Chapter • Understanding Your System • System Features • Typical Equipment • Interfacing With the POS/EM Value System • An Ove ...
-
Sensormatic VM32 - page 13
1-2 Operator’s Manual Understanding Your System This manual describes those features that are available to you as system operator, and it provides instructions for using these features. It is up to you, however, to understand these features and apply them in your specific environment. Each site or situation has different concerns, capabilities, a ...
-
Sensormatic VM32 - page 14
A bout Your New System 1-3 • Define and display Quick Views , which are immediate camera call-ups of pre-defined scenes, with automatic zoom and focus. • Define and run Patterns , which comprise a sequential series of pan, tilt, zoom, and focus movem ents from a single camera. • Incorporate up to 64 of the pre-defined Quick Views and Patterns ...
-
Sensormatic VM32 - page 15
1-4 Operator’s Manual A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F li p V i e w P a t t e r n R e p e a t P a t t e r n S e q P r e v i o u s N e x t A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F li p V i e w P a t ...
-
Sensormatic VM32 - page 16
A bout Your New System 1-5 system alarms. You can access the menu to program automated system functions and use the utilities. • If there are two T OUCH T RACKER s installed with your system, you must configure one as the primary and the other as the secondary T OUCH T RACKER . The primary T OUCH T RACKER employs all of the functionality describe ...
-
Sensormatic VM32 - page 17
1-6 Operator’s Manual toggle back and forth between POS/EM Value priority over the cameras and system priority over the cameras. If a “-” is displayed on the LCD, this indicates that POS/EM Value will never take control of a camera in the event of an exception. An Overview of the T OUCH T RACKER The T OUCH T RACKER is a video control station ...
-
Sensormatic VM32 - page 18
A bout Your New System 1-7 Ball. When the menu is displayed, the zoom and focus buttons allow you to select the items on the LCD. The keypad contains buttons that call up video from individual cameras and control the pre-programmed m ovement of those cameras. It also contains the buttons for camera iris control, dome output control, and m onitor se ...
-
Sensormatic VM32 - page 19
1-8 Operator’s Manual In the camera control mode, the currently selected monitor and cam era numbers appear on the LCD. In addition, status messages that occur stay on the LCD for 5 seconds. If two T OUCH T RACKER s are installed, the letter “S” appears in the lower right corner of the LCD belonging to the secondary T OUCH T RACKER . In this ...
-
Sensormatic VM32 - page 20
A bout Your New System 1-9 A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F l i p V i e w P a t t e r n R e p e a t P a t t e r n S e q P r e v i o u s N e x t Figure 1-3: Selecting menu options Note The examples provided in later chapters will refer to using the Zoom and Focus buttons ...
-
Sensormatic VM32 - page 21
1-10 Operator’s Manual • Configure alarm acknowledgment settings. Refer to “Setting Autom atic Alarm Acknowledgment” in Chapter 5. • Define which inputs will trigger an alarm, and what camera action and/or output will be initiated when that alarm is triggered. Refer to “Setting Up System Alarms” in Chapter 3. • Tune the Tracker Ball ...
-
Sensormatic VM32 - page 22
A bout Your New System 1-11 displays the event number (1 through 64) of the Sequence currently active. In addition, the LCD displays how many seconds the current event will remain on the screen until the next event replaces it. For more information on the sequencing m ode, refer to the section titled “Running the Sequence,” in Chapter 2. Alarm ...
-
Sensormatic VM32 - page 23
1-12 Operator’s Manual NOTES: ...
-
Sensormatic VM32 - page 24
CHAPTER 2 Controlling Monitors, Cameras, and Output Devices This chapter describes the basic procedures necessary to operate your sy stem. It describes how to select monitors and control cameras. It provides instructions for displaying Quick Views, Patterns, and Sequences. It also describes how to control outputs and clear alarms. In This Chapter ? ...
-
Sensormatic VM32 - page 25
2-2 Operator's Manual Selecting Monitors Your system supports up to five monitors for displaying camera video. If two T OUCH T RACKERS are installed at your facility, either controller may display video from any camera on any of the monitors. However, only one T OUCH T RACKER can be in control of a monitor at any given time. To select a monito ...
-
Sensormatic VM32 - page 26
Controlling Monitors, Cameras, and Output Dev ices 2-3 Stepping Through the Cameras The Previous and Next buttons enable you to manually step through all of the cameras, one at a time. Press the Previous and Next buttons to step backward and forward, one camera at a time, through the 32 available cam era inputs. Controlling a Camera's Pan and ...
-
Sensormatic VM32 - page 27
2-4 Operator's Manual Ball farther to the right, the camera's panning speed increases until it reaches its maximum speed. This variable speed operation applies to programmable domes only. Non-programmable dom es provide two speeds: normal and fast. Controlling Zoom and Focus Once you have selected a camera, you can control the zoom and fo ...
-
Sensormatic VM32 - page 28
Controlling Monitors, Cameras, and Output Dev ices 2-5 buttons, the focus buttons reacts based on how long it is pressed. The longer a focus button is pressed, the more noticeable the response will be. Note For SpeedDome LT and SpeedDome Ultra series of dom es, using a focus button changes the dome to manual focus m ode. To resume auto focus mode, ...
-
Sensormatic VM32 - page 29
2-6 Operator's Manual Running the “Apple Peel” Pattern You can instruct a SpeedDome to run the Apple Peel pattern. This is a default pattern that all SpeedDomes can run without any user programming. The Apple Peel pattern consists of three revolutions of camera panning, with tilt starting at the ceiling. Each revolution tilts down approxim ...
-
Sensormatic VM32 - page 30
Controlling Monitors, Cameras, and Output Dev ices 2-7 Displaying Quick Views IMPORTANT The SpeedDome Ultra III and newer domes support up to 96 views. Older domes support up to 4 views. The T OUCH T RACKER beeps when you attempt to call up a view numbered higher than 4 on domes older than the SpeedDome Ultra III. A Quick View enables you to instan ...
-
Sensormatic VM32 - page 31
2-8 Operator's Manual 3. Use the number buttons to enter the number of the Quick View you want to display, and then press the View button. If the Quick View exists for that camera, the camera will im mediately point to the pre-defined Quick View, and then zoom and focus automatically. The following information appears on the LCD: CAM 12 MON 3 ...
-
Sensormatic VM32 - page 32
Controlling Monitors, Cameras, and Output Dev ices 2-9 2. Use the number buttons to enter the number of the cam era whose Pattern you want to run. Then press the Camera button. 3. Use the number buttons to enter the number of the Pattern you want to run. Then press the Pattern button (if you want the Pattern to run once), or press the Repeat Patter ...
-
Sensormatic VM32 - page 33
2-10 Operator's Manual You can define the Sequence that most adequately supports your specific needs. Refer to Chapter 3, “ Defining Automatic System Functions ,” for procedures on defining the Sequence. To run the Sequence, press the Seq button. The Sequence automatically begins running and the information shown here appears on the LCD. C ...
-
Sensormatic VM32 - page 34
Controlling Monitors, Cameras, and Output Dev ices 2-11 device. You can control the state of any output device connected to the system by using the T OUCH T RACKER . There can be up to 129 output devices (128 for domes, 1 for the video matrix switcher) configured at a single facility. It is useful to post information about the output devices near t ...
-
Sensormatic VM32 - page 35
2-12 Operator's Manual If you entered an invalid output number (any number greater than 4 or an output that does not exist) the T OUCH T RACKER beeps. Controlling Switcher Outputs If you press the Output On button without entering a number first, the output device connected to the video matrix switcher activates. The following information will ...
-
Sensormatic VM32 - page 36
Controlling Monitors, Cameras, and Output Dev ices 2-13 Each alarm can be configured to automatically call up video and initiate an output device. For example, when an alarm is triggered, it can autom atically run a specific Pattern and set off an audible alarm. In addition, whenever an alarm is triggered, the T OUCH T RACKER beeps, signaling an ac ...
-
Sensormatic VM32 - page 37
2-14 Operator's Manual SRC: C AM 33 I NP 4 MON 5 ALA RM 4 Figure 2-5: Alarm display when triggered by the video matrix switcher. The default setting for the system is for manual clearing of alarms. However, the system can be set to clear alarms automatically after a designated period of time. This is known as automatic alarm acknowledgment . T ...
-
Sensormatic VM32 - page 38
CHAPTER 3 Defining Automatic System Functions Automated functions help you to use your system more efficiently. By using Quick Views, Patterns, and Sequences, you can easily survey the areas that you want without panning, tilting, or focusing the cameras manually. In This Chapter • Defining Quick Views • Defining Patterns • SpeedDome LT Auto ...
-
Sensormatic VM32 - page 39
3-2 Operator's Manual Defining Quick Views IMPORTANT The SpeedDome Ultra III and newer domes support up to 96 views. Other domes support up to 4 views. The Touch Tracker beeps when you attempt to program a view numbered higher than 4 on dom es older than the SpeedDome Ultra III. A Quick View automatically and instantaneously calls up a view fr ...
-
Sensormatic VM32 - page 40
Defining A utomatic System Functions 3-3 Note For SpeedDome LT and SpeedDome Ultra, adjusting the focus switches the dome to manual focus m ode. Each time the Quick View is called, you will need to manually focus the image. To prevent this, press the Iris Open and Iris Close buttons simultaneously to resume auto focus mode. 3. When you have the per ...
-
Sensormatic VM32 - page 41
3-4 Operator's Manual The following message appears briefly on the LCD: CAM 15 MON 2 VI EW S AVED If you press an invalid number (any number greater than 96), the T OUCH T RACKER beeps, and the system will not save the Quick View. If this happens, simply press a valid number and the Quick View will be saved. If you want to test the Quick View, ...
-
Sensormatic VM32 - page 42
Defining A utomatic System Functions 3-5 There is also a time constraint on Patterns. A single Pattern cannot have a duration longer than approximately 6 minutes and 50 seconds. Even if a Pattern has only two camera commands in it, the Pattern will stop recording once its duration time has elapsed. Patterns are programmed in real-time. This m eans ...
-
Sensormatic VM32 - page 43
3-6 Operator's Manual The T OUCH T RACKER is now in the menu/programm ing mode, and the menu appears: DEFINE SEQUEN CE SETUP VIEW 4. Use the Tracker Ball to scroll through the menu selections until Record Pattern is displayed. RECORD PATTE RN AUTO AL ARM A CK 5. Press the appropriate button—zoom or focus—to select Record Pattern . The foll ...
-
Sensormatic VM32 - page 44
Defining A utomatic System Functions 3-7 If you press an invalid number (any number greater than 3), the T OUCH T RACKER beeps, and the system will not allow you to program the Pattern. If this happens, simply press a valid number and continue with this procedure. 7. The Pattern is now being recorded in real-time. If you let the camera sit still at ...
-
Sensormatic VM32 - page 45
3-8 Operator's Manual SpeedDome LT Auto Pan Programming Auto Pan is a special feature supported by SpeedDome LT only. It allows you program a smooth side-to-side camera pan of an area. The SpeedDom e LT does not allow you to program the same types of Patterns that other domes support. Instead, use Pattern programm ing to set the Auto Pan funct ...
-
Sensormatic VM32 - page 46
Defining A utomatic System Functions 3-9 Tip : The Auto Pan can be defined from the primary T OUCH T RACKER only. 1. Using the number buttons, enter the number of the SpeedDom e LT for which you are defining the Auto Pan. Then press (the Camera button). 2. Pan and tilt the camera to the starting point of the Pattern, and then zoom and focus the cam ...
-
Sensormatic VM32 - page 47
3-10 Operator's Manual Note The Auto Pan must be programm ed for Pattern 1 only. 6. Press the number 1 on the keypad. The following message appears on the LCD: RECORD PATTE RN 45 FINISH W <NEXT> 7. The Auto Pan is now being recorded. Any extraneous up or down movement will be ignored when program ming the Auto Pan. 8. Move the camera unt ...
-
Sensormatic VM32 - page 48
Defining A utomatic System Functions 3-11 Understanding Sequence Programming You can define a Sequence that incorporates up to 64 events for each T OUCH T RACKER . An event is a Quick View or Pattern that you have already defined; an event can also be a fixed shot. The events that you include in the Sequence can be defined for any camera. For each ...
-
Sensormatic VM32 - page 49
3-12 Operator's Manual EVT CA M AC T DUR 01 0 5 VI EW96 45 02 2 3 PA TN3 20 03 - - VI EW-- -- . . . . 64 1 2 VI EW-- 30 CO LUMN 1 CO LUMN 2 CO LUMN 3 CO LUMN 4 Events in a Sequence are divided into four columns: column 1 “ Evt ” is the number of the event (1 through 64) within the Sequence; this number determines which event comes first, s ...
-
Sensormatic VM32 - page 50
Defining A utomatic System Functions 3-13 When the define Sequence prompt is displayed, the cursor appears in the Cam field. This is where you enter the camera number for the first event to be included in the Sequence. If the Sequence is undefined, or if the first event in the Sequence was skipped, the LCD looks like this: EVT CA M AC T DUR 01 - - ...
-
Sensormatic VM32 - page 51
3-14 Operator's Manual 3. Use the Tracker Ball to scroll to the event you want to define. 4. In the Cam field, use the number buttons to enter the camera num ber for the action or fixed shot you want to include. The camera number must be entered as two digits. 5. In the Act field, indicate the type of action—Quick View, Pattern, or fixed sho ...
-
Sensormatic VM32 - page 52
Defining A utomatic System Functions 3-15 Alarm Programming Overview You can define up to 136 different alarms (128 from dom e inputs, 8 from switcher inputs) for your system. An alarm is triggered when one of the inputs connected to a dome or the switcher changes from its norm al state to its abnormal state. For example, if the input is a sm oke d ...
-
Sensormatic VM32 - page 53
3-16 Operator's Manual When the Tracker Ball is moved to the right of the View or Pattern entry, the lower line of the LCD displays the information related to outputs. Refer to the following illustration. CAM12/1 ==> M ON 5 OUT CA M09 OUTP3 In this example, input 1 on camera 12 is the specific input that will trigger the alarm. The alarm in ...
-
Sensormatic VM32 - page 54
Defining A utomatic System Functions 3-17 Setting Up System Alarms Tip : Alarm actions can be defined from the prim ary T OUCH T RACKER only. The following procedure describes how to set up a system alarm. 1. Press the Menu button. The T OUCH T RACKER is now in the menu/programm ing mode, and the menu appears: DEFINE SEQUEN CE SETUP VIEW 2. Use the ...
-
Sensormatic VM32 - page 55
3-18 Operator's Manual 33 on the LCD). When the appropriate value appears in the Cam field, continue with step 5. 5. The input number appears after the slash ( /) on the top line. Move the Tracker Ball up or down to display the input numbers for the selected camera. Continue with step 6 when the appropriate input number appears. 6. The flashin ...
-
Sensormatic VM32 - page 56
Defining A utomatic System Functions 3-19 CAM12/1 ==> M ON 5 OUT CA M09 OUTP3 If you do not want an output to be initiated, press Clear to leave this field blank. 10. Choose one of the following: • Do you want to set up another alarm input for this camera? If so, use the Tracker Ball to scroll through the available inputs until the appropriate ...
-
Sensormatic VM32 - page 57
3-20 Operator's Manual NOTES : ...
-
Sensormatic VM32 - page 58
CHAPTER 4 On-Screen Programming This chapter describes how to use the on-screen forms. Use these forms to set up monitors, name cam eras, set the system date and time, and configure the Event Timer. In This Chapter • Using the On-Screen Forms • Setting Up Monitors • Namin g C amera s • Setting the System Date and Time • Configuring Timed ...
-
Sensormatic VM32 - page 59
4-2 Operator's Manual Using the On-Screen Forms Your system supports the configuring of monitors, camera nam es, date and time, and timed events by using special on-screen forms. When you select Monitor Setup , Camera Titles , Set Date/Time , or Event Timers from the T OUCH T RACKER menu, special forms appear on Monitor 1. The T OUCH T RACKER ...
-
Sensormatic VM32 - page 60
Using the On-Screen Forms 4-3 CAMERA TITLE S MONITOR SETU P 3. Press the appropriate button—zoom or focus—to select Monitor Setup . The following prompt appears on the LCD: ON SCREEN At the same time, the following form appears on Monitor 1: MONIT OR - 1 TIME DA TE - OFF TITLE D ISP LAY - ON BRIGH TN ESS - 8 Note The Tracker Ball or the Next bu ...
-
Sensormatic VM32 - page 61
4-4 Operator's Manual If you want the camera names to appear on the monitor, select ON ; if you do not want camera names to appear on the m onitor, select OFF . 7. Move the cursor to the Brightness field. Press zoom or focus to cycle through the available choices. The range for the text brightness setting is 1 (darkest) to 8 (brightest). Repea ...
-
Sensormatic VM32 - page 62
Using the On-Screen Forms 4-5 ON SCREEN At the same time, the following form appears on Monitor 1: TITLE - ..... .. . ..... .. . ABCDE FGH IJK LMN OPQRS TUV WXY Zab cdefg hij klm nop qrstu vwx yz s p 01 2 34567 89< >:- ./; CAMER A - O1 4. Using the Next button, move the cursor to the Camera Number field. Press zoom or focus until the correct ...
-
Sensormatic VM32 - page 63
4-6 Operator's Manual 7. The selected character now appears in the selected position of the Title field. Note If you make a “typing” mistake, use the Next button to move the cursor around the Title field. 8. Continue to repeat steps 6 and 7 until you have the title complete. If you want to name other cameras, repeat steps 4 through 7. 9. W ...
-
Sensormatic VM32 - page 64
Using the On-Screen Forms 4-7 The following prompt appears on the LCD: ON SCREEN At the same time, the following form appears on Monitor 1: SET T IM E A ND DATE DATE FO RMA T - MM-D D-Y Y DATE - 04- 30- 97 TIME - 13: 25: 00 DAY O F WEE K - WED 3. Use the Tracker Ball or Next button to move the cursor to the Date Format field. Press the zoom or focu ...
-
Sensormatic VM32 - page 65
4-8 Operator's Manual Note The numbers entered from the keypad will appear on the LCD. The numbers will not appear in the fields on the monitor until the zoom or focus button is pressed. 5. Move the cursor to the Time field. Use the number buttons to enter the correct time in 24-hour format. Keep in mind that 24:00:00 is midnight and 12:00:00 ...
-
Sensormatic VM32 - page 66
Using the On-Screen Forms 4-9 your facility that is staffed from 7:30 A.M. to 6:00 P.M. Monday through Friday, and from 8:00 A.M. to 12:00 P.M. on Saturday. It might be useful to run a pattern 15 minutes after the warehouse closes to ensure that all personnel have left the warehouse before activating the motion sensor. Without timed events, you wou ...
-
Sensormatic VM32 - page 67
4-10 Operator's Manual 4. Move the Tracker Ball up and down to scroll between the available events. When the correct event number appears, continue with step 5. 5. Use the number buttons to enter the monitor num ber (1-5) where the Timed Event will be shown. 6. Use the number buttons to enter the camera num ber (1-32) whose video will appear o ...
-
Sensormatic VM32 - page 68
Using the On-Screen Forms 4-11 EVENT S ETUP EVENT T IMERS The following prompt appears on the LCD: ON SCREEN At the same time, the following form appears on Monitor 1: EVENT TI MER 24:00 IL LEG AL TIME EDIT TIM ER NEXT TIM ER CLEAR TI MER ENABL E T IME R CHANG E T IME R T O HH:M M Note: “24:00 Illegal Time” appears on line 2 if the time has not ...
-
Sensormatic VM32 - page 69
4-12 Operator's Manual Once the time for the event is set, “NEW” appears on line 2: EVEN T T IME R 18:1 5 N EW EDIT TI MER NEXT TI MER CLEA R T IME R ENAB LE TIM ER CHAN GE TIM ER TO HH :M M Note The Tracker Ball or the Next button is used to move the cursor between the fields on the screen. 5. The cursor automatically moves to Edit Timers ...
-
Sensormatic VM32 - page 70
Using the On-Screen Forms 4-13 7. When you have finished scheduling pre-defined events for this time slot, move the cursor to “Previous Menu” then press zoom or focus. Once events have been scheduled, “DISABLED” appears on line 2: EVENT T IME R 18:15 D ISA BLE D EDIT TI MER NEXT TI MER CLEAR T IME R ENABL E TIM ER CHANG E TIM ER TO HH:MM 8. ...
-
Sensormatic VM32 - page 71
4-14 Operator's Manual Clearing Scheduled Events If you need to stop events from running on a regular basis, do the following: 1. Press the Menu button. 2. Use the Tracker Ball to scroll through the list of menu selections, then press the appropriate button—zoom or focus—to select Event Timers . The following prompt appears on the LCD: ON ...
-
Sensormatic VM32 - page 72
Using the On-Screen Forms 4-15 Disabling Timed Events If you need to temporarily stop scheduled events from running, do the following: 1. Press the Menu button. 2. Use the Tracker Ball to scroll through the list of menu selections, then press the appropriate button—zoom or focus—to select Event Timers . The following prompt appears on the LCD: ...
-
Sensormatic VM32 - page 73
4-16 Operator's Manual Changing a Scheduled Time Slot If you need to change the time for scheduled events, do the following: 1. Press the Menu button. 2. Use the Tracker Ball to scroll through the list of menu selections, then press the appropriate button—zoom or focus—to select Event Timers . The following prompt appears on the LCD: ON SC ...
-
Sensormatic VM32 - page 74
CHAPTER 5 T OUCH T RACKER Utilities This chapter describes the utilities available for your system. These utilities include language settings, alarm acknowledgment settings, resetting dom es, and ID code display. In This Chapter • Selecting a Language • Designating Primary versus Secondary T OUCH T RACKER • Setting Automatic Alarm Acknowledgm ...
-
Sensormatic VM32 - page 75
5-2 Operator’s Manual Selecting a Language The system supports a number of different languages, including the following: • English • Spanish • French • Portuguese • German • Italian 1. Press the Menu button on the keypad to display the menu. 2. Use the Tracker Ball to scroll through the menu items and press the appropriate button— z ...
-
Sensormatic VM32 - page 76
TOUCH TRA CKER Utilities 5-3 T OUCH T RACKER Functions Primary T OUCH T RACKER Secondary T OUCH T RACKER Select a camera üü Select a monitor üü Manually control a camera (pan, tilt, zoom, focus, iris) üü Flip a SpeedDome üü Initiate automatic system functions (Quick Views, Patterns, outputs) üü Run the Sequence üü Clear alarms ü Define ...
-
Sensormatic VM32 - page 77
5-4 Operator’s Manual IMPORTANT If you have two T OUCH T RACKER s installed at your facility, one must be designated primary and one must be designated secondary. You can determine which T OUCH T RACKER has been designated as “secondary” by the letter S that appears in the lower right corner of the LCD. If you have only one T OUCH T RACKER in ...
-
Sensormatic VM32 - page 78
TOUCH TRA CKER Utilities 5-5 Setting Automatic Alarm Acknowledgment The primary T OUCH T RACKER can be set to automatically clear alarms after a designated period of time. The range for this setting is 0 to 999 seconds. When 0 is the setting, you must manually acknowledge the alarms using the Clear button. The default setting is 0, for manual clear ...
-
Sensormatic VM32 - page 79
5-6 Operator’s Manual • Press Previous to make the backlighting dimm er. • Press Next to make the backlighting brighter. 4. When finished, press Menu to return to camera control mode. Turning Key Click On / Off If you want to enable or disable the click sound that is made when you press buttons on the T OUCH T RACKER , do the following: 1. Pr ...
-
Sensormatic VM32 - page 80
TOUCH TRA CKER Utilities 5-7 1. Press Menu to display the LCD menu. 2. Use the Tracker Ball to scroll through the menu items. When you see Adj Keyclick Vol , press Zoom or Focus to select. 3. Press Previous or Next to change the setting. • Press Previous to make the volume softer. • Press Next to make the volume louder. 4. When finished, press ...
-
Sensormatic VM32 - page 81
5-8 Operator’s Manual 2. Press the Info button on the keypad. The LCD displays the Flash part number and version. CAM 30 F 0701- 2489- 0100 Notice the “F” prefix in front of the ID code; this indicates that it applies to the dome's Flash PROM. 3. Press the Info button again to display the dome's EEPROM part number and version. CAM 3 ...
-
Sensormatic VM32 - page 82
APPENDIX A Programming Worksheets This Appendix contains worksheets that will make the task of programm ing your system a great deal easier. There are several different kinds of worksheets included in this appendix. You should make a sufficient number of copies of each to fully document the configuration of the equipment at your facility. This Appe ...
-
Sensormatic VM32 - page 83
A- 2 Operator's Manual Dome Configuration Worksheet This worksheet provides you with an easy method for recording the information related to the domes installed at your facility. It allows you to list the Quick Views, Patterns, Inputs and Outputs associated with each dome. If your dome supports more than four Quick Views, a worksheet with addi ...
-
Sensormatic VM32 - page 84
Programming Worksh eets A -3 Dome Configuration Worksheet Make copies of this page for futu re use . Dome Number _________ Dome Type _______________ Dome Name __________________________ Quick View Number Description 1 2 3 4 Pattern Number Description 1 2 3 Input Number Description Normal State Abnormal State 1 2 3 4 Output Number Description On Sta ...
-
Sensormatic VM32 - page 85
A- 4 Operator's Manual If your dome supports more than 4 Quick Views, use this worksheet to document additional Quick Views. Make copies of this page for future use. Dome Number _________ Dome Type _______________ Dome Name ____________________ Quick View Number Description ...
-
Sensormatic VM32 - page 86
Programming Worksh eets A -5 Setup Sequence Worksheet Your system supports up to 2 sequences (one for each T OUCH T RACKER ) consisting of up to 64 events. Fill out the Setup Sequence Worksheet before you begin actually setting up the Sequence. This worksheet enables you to determine the following: • Which events will be included in the Sequence ...
-
Sensormatic VM32 - page 87
A- 6 Operator's Manual Setup Sequence Worksheet Make copies of this page for future use. You may hav e up to 64 events for each sequence. Event # _________ T OUCH T RACKER __________________ __________ Number of camera whose video will be displayed in this event? __________ Action Type (Quick View, Pattern, or Fixed Shot). __________ Action Nu ...
-
Sensormatic VM32 - page 88
Programming Worksh eets A -7 Setup Alarms Worksheet Fill out the Setup Alarms Worksheet before you begin actually setting up an alarm. This worksheet enables you to determine the following: • Which inputs on which domes will trigger an alarm when their state changes from normal to abnorm al • The monitor on which the video from the alarm will b ...
-
Sensormatic VM32 - page 89
A- 8 Operator's Manual Dome Number: Dome Type: Location: ______________________ Input #1: ______________________________________________________________ The monitor where the video from the alarm will be displayed. Which camera's video is displayed and output initiated? Action Type: Quick View, Pattern, or fixed shot? Number of Quick View ...
-
Sensormatic VM32 - page 90
Programming Worksh eets A -9 Setup Alarms Worksheet Make copies of this worksheet for future use. Dome Number: Dome Type: ___________________ Dome Name: Input #1: ______________________________________________________________ The monitor where the video from the alarm will be displayed. Which camera's video is displayed and output initiated? A ...
-
Sensormatic VM32 - page 91
A- 10 Operator's Manual Timed Events Worksheet Your system supports up to 32 timed events. For each event, you must specify the monitor number, camera num ber, and action type (Quick View, Pattern, or Sequence) that will be called when the event runs. After the events are set up, you can schedule them to run during the 35 available time slots. ...
-
Sensormatic VM32 - page 92
Programming Worksh eets A-11 Timed Events Worksheet Make copies of this worksheet for future use. Event Number: ________ Description: _____________________________________________ Monitor Number: _________ Camera Number: _________ Action Type: _________ Action Number: ________ Days of Week To Run Circle Choices Sunday Monday Tuesday Wednesday Thurs ...
-
Sensormatic VM32 - page 93
A- 12 Operator's Manual Switcher Configuration Worksheet The video matrix switcher supports 8 alarm inputs and 1 relay output. The worksheet provided allows you to list the inputs and output attached to the switch. Main Switch Input Description Normal State Abnormal State Input 1 Smoke Detector - 1st floor lobby No smoke Smoke Input 2 Tw iligh ...
-
Sensormatic VM32 - page 94
Programming Worksh eets A-13 Switcher Setup Worksheet Make copies of this worksheet for future use. Main Switch Inputs Description Normal State Abnormal State Input 1 Input 2 Input 3 Input 4 Input 5 Input 6 Input 7 Input 8 Main Switch Output Description On State Off State Output 1 ...
-
Sensormatic VM32 - page 95
A- 14 Operator's Manual NOTES: ...
-
Sensormatic VM32 - page 96
APPENDIX B Video Matrix Switcher: Alarm and Relay Connections This appendix provides information about connecting the eight alarm inputs and one relay output to your Video Matrix Switcher. A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F l i p V i e w P a t t e r n R e p e a t P a t t e ...
-
Sensormatic VM32 - page 97
B-2 Operator's Manual Alarm and Relay Connections The back panel of the video matrix switcher provides eight alarm contact inputs, an external frequency synchronization input, and contact terminations for an internal alarm-activated relay. The Form-C internal relay may be activated during alarms for control of a VCR or other alarm response dev ...
-
Sensormatic VM32 - page 98
A larm and Relay Connections B-3 Pin Number Description 11 External Sync Ground 12 External Sync Input 13 Ground 14 Relay—Normally Open 15 Relay—Normally Closed 16 Relay—Common Connections Alarms • Alarm contact closures must have a resistance of 500 Ohms or less. • Connect alarm contacts to inputs 1 through 8 (pins 2 through 9). • Conn ...
-
Sensormatic VM32 - page 99
B-4 Operator's Manual NOTES: ...
-
Sensormatic VM32 - page 100
APPENDIX C Software License Agreement By using this software, you accept the terms and conditions of this license agreement. Read this license agreement carefully. A B C D 1 2 3 4 5 6 7 8 9 0 P e e l I n f o O n O u t p u t O f f C l e a r M e n u I r i s C l o s e O p e n F l i p V i e w P a t t e r n R e p e a t P a t t e r n S e q P r e v i o u ...
-
Sensormatic VM32 - page 101
C-2 Operator's Manual SOFTWARE LICENSE AGREEMENT 1. General. Software is being licensed to the Customer pursuant to the following terms and conditions, which supplement any purchase or lease agreement (the "Equipment Agreem ent") between Customer and Sensormatic Electronics Corporation ("SEC"). By accepting receipt of, or b ...
-
Sensormatic VM32 - page 102
Softw are License Agreement C-3 Documentation in the possession of Customer or to require Custom er to destroy all such copies and certify such destruction in writing to SEC. 4. Ownership. Customer agrees and acknowledges that (i) SEC (or its suppliers) is the sole owner of the Software and Documentation (including all copies thereof, in whatever f ...
-
Sensormatic VM32 - page 103
C-4 Operator's Manual Software for the purposes of Customer's internal business and who use it in accordance with the terms of this License Agreement. Custom er will not use the Software for the provision of time-sharing services to others. Customer will not modify the Software or decompile, disassemble or otherwise reverse engineer the S ...
-
Sensormatic VM32 - page 104
Softw are License Agreement C-5 charge. The period of this warranty will be 12 months from the date of the Equipment Agreement (the “Warranty Period”). EXCEPT AS SET FORTH IN THIS SECTION 6, SEC DISCLAIMS ANY WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE OR THE DOCUMENTATION OR THEIR OPERATION OR USE, INCLUDING, WITHOUT LIMITATION, ...
-
Sensormatic VM32 - page 105
C-6 Operator's Manual (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause of Department of Defense Federal Acquisition Supplement (DFARS) 252.227-7013 or in subparagraph (g)(3)(i) of Federal Acquisition Regulations (FAR) 52.227-14, Alternate III, as applicable. 8. Indemnity. SEC will defend and hold Customer harmless from a ...
-
Sensormatic VM32 - page 106
Glossary abnormal st ate Describes an unexpected state of a device or unexpected result of a function. For example, if a user sets the normal state of a door to be closed, it would be in an abnormal state when it is open. An alarm may be triggered when an abnormal state is detected. alarm The system's response when an input changes from its no ...
-
Sensormatic VM32 - page 107
G-2 Operator's Manual alarm mode The condition of the T OUCH T RACKER when an alarm is active. In the alarm mode, the T OUCH T RACKER beeps and the associated alarm information is displayed on the LCD. Apple Peel p attern A default pattern that a SpeedDome runs whereby the dome makes three complete revolutions starting at the ceiling line and ...
-
Sensormatic VM32 - page 108
Glossary G-3 2. The blinking area on Monitor 1 when an on-screen form (such as Camera Naming or Event Scheduling) is displayed. It indicates which field on the screen is currently active. It can be moved using the T racker Ball or the Next button. dome A camera housed inside a plastic dome. The system can be used to control programmable SpeedDom es ...
-
Sensormatic VM32 - page 109
G-4 Operator's Manual input A connection point on a system component that enables the system to monitor input devices. Input device A hardware component that provides an electrical signal to indicate the state of a device. T ypical input devices include door contacts, motion detectors and smoke detectors. iris The camera component that determ ...
-
Sensormatic VM32 - page 110
Glossary G-5 monitor The screen where camera video is displayed. Y our system supports up to 5 monitors. Monitor 1 will display on-screen forms when selected. non-programmable camera A camera or dome that does not have any programm able features. normal st ate Describes the expected state of a device or expected result of a function. For example, i ...
-
Sensormatic VM32 - page 111
G-6 Operator's Manual POS/EM V alue system Point of Sale/Exception Monitoring. An external system that some systems are connected to. POS/EM V alue m onitors the activity that takes place at the cash registers and documents selected exception transactions. primary T OUCH T RA CKER The T OUCH T RACKER that employs all of he functionality descri ...
-
Sensormatic VM32 - page 112
Glossary G-7 sequence mode The condition of the T OUCH T RACKER when the Sequence is running. The LCD displays the event number and time remaining until the next event in the Sequence is displayed. SpeedDome A programmable cam era that enables security personnel to track a target or survey an area. This camera supports program mable features (prese ...
-
Sensormatic VM32 - page 113
G-8 Operator's Manual T racker Ball The portion of the T OUCH T RACKER that enables you to pan and tilt the camera and scroll through the selections on the menu. utility A menu selection that either assists you in self-help system diagnostics, or provides you with a convenience feature for system operation. The utilities are accessed via the m ...
-
Sensormatic VM32 - page 114
Index —A— adjusting key click volume, 5-6 adjusting LCD backlighting, 5-5 Alarm Acknowledgment setting delay period, 5-5 Alarms clearing, 2-12 programming overview, 3-15 setting automatic / manual acknowledgment, 5-5 worksheets, A-7 Apple Peel pattern, 2-6 Auto focus resuming, 2-5 Auto Pan feature SpeedDome LT, 3-8 —B— Backlighting adjustin ...
-
Sensormatic VM32 - page 115
X-2 Operator's Manual —D— date / time setup, 4-6 Defining patterns, 3-4 quick views, 3-2 sequences, 3-13 disabling key click, 5-6 disabling timed events, 4-15 Dome Configuration worksheet, A-2 —E— enabling key click, 5-6 Event Timers changing time slot, 4-16 clearing, 4-14 configuring, 4-10 disabling, 4-15 setup, 4-8 when to use, 4-8 w ...
-
Sensormatic VM32 - page 116
Index X-3 —P— Patterns Apple Peel, 2-6 defining, 3-4 running, 2-8 worksheet, A-2 POS/EM interfacing with, 1-5 —Q— Quick Views defining, 3-2 displaying, 2-7 worksheet, A-2 —R— related documents, ix Running patterns, 2-8 quick views, 2-7 sequences, 2-9 —S— Selecting cameras, 2-2 language for LCD and on-screen forms, 5-2 monitors, 2-2 ...
-
Sensormatic VM32 - page 117
X-4 Operator's Manual —U— Utilities language, 5-2 primary vs secondary T OUCH T RACKER , 5-2 special use, 5-8 SpeedDome ID, 5-7 SpeedDome reset, 5-7 —V— Video Matrix Switcher connecting inputs/output, B-1 worksheet, A-12 —W— Worksheets alarms, A-7 dome configuration, A-2 sequence, A-5 switch configuration, A-12 timed events, A-10 ? ...
-
Sensormatic VM32 - page 118
Survey Did this document help you do your job? Please complete this short survey by circling the number that best matches your opinion of each statement. Also, give us your comments on how we could improve items you rate 3 or lower . Provide examples, if necessary. Your input will help us improve this information. Thank you for your time. What do y ...
-
Sensormatic VM32 - page 119
NO POSTAGE NECESSARY IF M A IL E D IN TH E UNI TED S TAT ES BUSINE SS REPLY MAIL F IRS T C LASS MAIL PE RMIT NO . 2344 BO CA R A TO N, F LO R I D A SEN SORMA TIC EL ECTR ONI CS COR PORAT ION ATTN : TECHNI CAL COMM UNICA TIONS / MS C-2 7 PO B OX 5037 BOCA RATON, FLO RIDA 3 343 1-97 14 POSTAGE WIL L BE PAID BY ADDRESSEE 1. F OLD HE RE 2. AP PLY TRANS ...
-
Sensormatic VM32 - page 120
Sensormati c Electronics Corporation 951 Ya mato Roa d • Boc a Raton • Flori da 3 3431-0700 Telephone 561-989-7000 • Telefax 561-9 89-7017 • Toll Free 8 00-241-6678 8000-2655-01 ...
Haben Sie eine Frage bezüglich Sensormatic VM32?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sensormatic VM32 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sensormatic VM32 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.