Deutsch dropdown-ico

Bedienungsanleitung Bay Technical Associates 350

146 Seiten 1.79 mb
Download

Zur Seite of 146

Summary
  • Bay Technical Associates 350 - page 1

    Part No. 893-00992-B June 1997 Using the Ba yStac k 350 10/100 A utosense Switc h 350fbk.book Page i Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 2

    ii 893-00992-B 4401 Great America Parkwa y 8 F ederal Street Santa Clara, CA 95054 Billerica, MA 01821 © 1997 by Bay Networks, Inc. All rights reserved. T rademarks Bay Networks and Optivity are re gistered trademarks of Bay Networks, Inc. Bay Networks Press, Centillion, NetICs, BayStack, and EZ LAN are trademarks of Bay Networks, Inc. Other brand ...

  • Bay Technical Associates 350 - page 3

    893-00992-B iii V oluntary Control Council f or Interference (VCCI) Statement This equipment is in the first category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the V oluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines that are aim ...

  • Bay Technical Associates 350 - page 4

    350fbk.book Page iv Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 5

    893-00992-B v Contents Preface A udience .......................................................................................................................... xv Organization .................................................................................................................... xv Conv entions ..................................... ...

  • Bay Technical Associates 350 - page 6

    vi 893-00992-B Creating VLAN Workgroups ................................................................................... 1-10 Quick Start .................................................................................................................... 1-11 Quick Start to Installing the BayStac k 350 Switch .................................... ...

  • Bay Technical Associates 350 - page 7

    893-00992-B vii Modem Requirements .............................................................................................. 3-2 Connecting to the Ba yStack 350 Switch Ser vice P or t .............................................. 3-3 Accessing the CI Menus and Screens ........................................................................... ...

  • Bay Technical Associates 350 - page 8

    viii 893-00992-B Logout ........................................................................................................................... 3-55 Chapter 4 T roub leshooting Ov er vie w ......................................................................................................................... 4-1 LED Indications ............... ...

  • Bay Technical Associates 350 - page 9

    893-00992-B ix Appendix C Switch Default Settings Appendix D Sample BootP Configuration File Index 350fbk.book Page ix Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 10

    350fbk.book Page x Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 11

    893-00992-B xi Figures Figure 1-1. Ba yStack 350 10/100 A utosense Switch ................................................. 1-1 Figure 1-2. F ront and back panels .............................................................................. 1-2 Figure 1-3. Ba yStack 350 s witches for pow er wor kg roups ......................................... 1- ...

  • Bay Technical Associates 350 - page 12

    xii 893-00992-B Figure 3-15. P or t Statistics screen ............................................................................. 3-32 Figure 3-16. Clear P or t Statistics screen .................................................................... 3-36 Figure 3-17. Ser vice P or t Configuration screen ............................................ ...

  • Bay Technical Associates 350 - page 13

    893-00992-B xiii T ables T able 1-1. F ront and back panel components ........................................................... 1-3 T able 2-1. P ower-up sequence ............................................................................... 2-15 T able 3-1. Console interf ace main menu commands ................................................ 3 ...

  • Bay Technical Associates 350 - page 14

    350fbk.book Page xiv Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 15

    893-00992-B xv Preface W elcome to the BayStack 350 10/100 Autosense Switch, part of the Bay Networks ® BayStack ™ line of communications products. There are tw o versions of the BayStack 350 10/100 Autosense Switch: the Model 350T and the Model 350F . This guide describes the features, uses, and installation procedures for both models. (Unless ...

  • Bay Technical Associates 350 - page 16

    Using the BayStack 350 10/100 Autosense Switch xvi 893-00992-B • Appendix A lists operational and en vironmental specifications that apply to the BayStack 350 switch. • Appendix B describes the BayStack 350 switch connectors (ports) and pin assignments. • Appendix C lists the factory default settings for the BayStack 350 switch. • Appendix ...

  • Bay Technical Associates 350 - page 17

    Preface 893-00992-B xvii Other Con ventions This guide uses the follo wing typographical conv entions: italics Used for book titles. In command descriptions, italic type indicates a v ariable that you supply . Monospace type Represents examples of screen te xt or screen field entries you might be required to type. [Enter] Named ke ys in text are e ...

  • Bay Technical Associates 350 - page 18

    Using the BayStack 350 10/100 Autosense Switch xviii 893-00992-B Ba y Networks Customer Service Y ou can purchase a support contract from your Bay Networks distributor or authorized reseller , or directly from Bay Networks Services. For information about, or to purchase a Bay Networks service contract, either call your local Bay Networks field sal ...

  • Bay Technical Associates 350 - page 19

    Preface 893-00992-B xix For More Inf ormation For information about Bay Netw orks and its products, visit the Bay Networks W orld W ide W eb (WWW) site at http://www .baynetworks.com. T o learn more about Bay Networks Customer Service, select Customer Service on the opening W eb page. 350fbk.book Page xix Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 20

    350fbk.book Page xx Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 21

    893-00992-B xxi Safety Messa g es Über setzter Sicherheitshinweis T raduction des Messages de Sécurité T raducción de los mensajes de seguridad Messag gi relativi alla sicurezza This section translates the safety alert messages used in this guide. Safety alert messages notify users of unsafe actions or conditions that could lead to personal inj ...

  • Bay Technical Associates 350 - page 22

    Using the BayStack 350 10/100 Autosense Switch xxii 893-00992-B V orsicht: Dieser Sicherheitshinweis macht den Benutzer auf Maßnahmen oder Bedingungen aufmerksam, die die V erletzung von Personen zur F olge haben können. Achtung: Dieser Sicherheitshinweis macht den Benutzer auf Maßnahmen oder Bedingungen aufmerksam, die eine Beschädigung der Ge ...

  • Bay Technical Associates 350 - page 23

    Safety Messages 893-00992-B xxiii Safety Alert Messages Used in This Guide The follo wing safety alert messages are used in this guide. Please read and follo w these instructions when you encounter them in the text. Class A Pr oduct Copyright page Caution: This de vice is a Class A product. In a domestic en vironment, this de vice can cause radio i ...

  • Bay Technical Associates 350 - page 24

    Using the BayStack 350 10/100 Autosense Switch xxiv 893-00992-B Accum ulated W eight (W all Mount) P age 2-1 Caution: The scre ws and wall composition must be able to withstand the weight of the de vice, plus the additional weight of the attached network cables and po wer cords. Achtung: Schrauben und W and müssen so beschaffen sein, daß sie dem ...

  • Bay Technical Associates 350 - page 25

    Safety Messages 893-00992-B xxv Accum ulated W eight (Shelf or T able Mount) P age 2-3 Caution: When this de vice is installed in a stack on a shelf or tabletop, the accumulated weight of the port cables increases with the height of the shelf or tabletop. Achtung: W enn dieses Gerät in einem Stapel auf einem T isch oder einem Regalboden installier ...

  • Bay Technical Associates 350 - page 26

    Using the BayStack 350 10/100 Autosense Switch xxvi 893-00992-B Hazar dous Electrical Current P age 2-5 W arning: T o av oid bodily injury from hazardous electrical current, do not connect the po wer cord until instructed to do so. V orsicht: Um V erletzungsgefahr durch einen elektrischen Stromschlag auszuschließen, schließen Sie das Netzstromkab ...

  • Bay Technical Associates 350 - page 27

    Safety Messages 893-00992-B xxvii Stac king Units in a Rac k P age 2-10 Caution: When mounting this de vice in a rack, do not stack units directly on top of one another in the rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting brackets are not designed to support multiple units. Achtung: W enn Sie dieses Gerät ...

  • Bay Technical Associates 350 - page 28

    Using the BayStack 350 10/100 Autosense Switch xxviii 893-00992-B Hazar dous Light Sour ce P age 2-13 W arning: Fiber optic equipment can emit laser or infrared light that can injure your eyes. Ne ver look into an optical fiber or connector port. Always assume that fiber optic cables are connected to a light source. V orsicht: Glasf aserkomponent ...

  • Bay Technical Associates 350 - page 29

    Safety Messages 893-00992-B xxix T urning Off P ower to the Unit P age 2-14 W arning: Remov al of the power cord is the only way to turn of f po wer to this de vice. The power cord must al ways be connected in a location that can be accessed quickly and safely in case of an emergenc y . V orsicht: Die Stromzufuhr zu diesem Gerät kann nur durch Zie ...

  • Bay Technical Associates 350 - page 30

    Using the BayStack 350 10/100 Autosense Switch xxx 893-00992-B Reset to Default Settings Command P age 3-8 Caution: If you choose the Reset to Default Settings command, all of your configured settings will be replaced with factory default settings when you press [Enter]. Achtung: Bei Auswahl des Befehls zur Rücksetzung auf die Standardeinstellung ...

  • Bay Technical Associates 350 - page 31

    Safety Messages 893-00992-B xxxi Choosing a Baud Rate P age 3-38 Caution: If you choose a baud rate that does not match your console terminal baud rate, you will lose communication with the configuration interface when you press [Enter]. If communication is lost, set your console terminal to match the ne w service port setting. Achtung: Bei Auswah ...

  • Bay Technical Associates 350 - page 32

    Using the BayStack 350 10/100 Autosense Switch xxxii 893-00992-B Changing P assw ords P age 3-38 Caution: If you change the system-supplied default passwords, be sure to write the ne w passw ords do wn and keep them in a safe place. If you forget the ne w passwords, you cannot access the console interface. In that case, contact Bay Networks for hel ...

  • Bay Technical Associates 350 - page 33

    Safety Messages 893-00992-B xxxiii Interrupting a Software Download P age 3-48 Caution: Do not interrupt power to the de vice during the software do wnload process. If the po wer is interrupted, the firmware image can become corrupted. Achtung: Unterbrechen Sie die Stromzufuhr zum Gerät nicht, während die Software herunter geladen wird. Bei Unte ...

  • Bay Technical Associates 350 - page 34

    Using the BayStack 350 10/100 Autosense Switch xxxiv 893-00992-B Remo ving the T op Cover P age 4-1 W arning: T o av oid bodily injury from hazardous electrical current, ne ver remov e the top cover of the de vice. There are no user -serviceable components inside. V orsicht: Um V erletzungsgefahr durch einen elektrischen Stromschlag auszuschließen ...

  • Bay Technical Associates 350 - page 35

    893-00992-B 1-1 Chapter 1 Getting Star ted Overview This chapter provides an introduction to the BayStack 350 10/100 Autosense Switch and provides netw ork configuration examples. The “Quick Start” section allo ws you to quickly set up switch parameters to manage the switch using Simple Network Management Protocol (SNMP) or the switch service ...

  • Bay Technical Associates 350 - page 36

    Using the BayStack 350 10/100 Autosense Switch 1-2 893-00992-B Ba yStac k 350 Switch Components This section describes the user-accessible components of the BayStack 350 switches. • The Model 350F switch provides 12 autosense 10/100B ASE-TX ports and two 100B ASE-FX fiber optic ports. • The Model 350T switch provides 16 autosense 10/100B ASE-T ...

  • Bay Technical Associates 350 - page 37

    Getting Started 893-00992-B 1-3 *. 1 through 16 for Ba yStack Model 350T . †. Require 100-ohm unshielded twisted pair (UTP) cable. The RJ-45 connectors are wired as MDI-X por ts to connect end stations without using crossov er cables. ‡. Not av ailable on BayStac k Model 350F fiber optic por ts 13 and 14. T able 1-1. Front and bac k panel comp ...

  • Bay Technical Associates 350 - page 38

    Using the BayStack 350 10/100 Autosense Switch 1-4 893-00992-B Cooling F ans V ariable-speed cooling fans in the BayStack 350 switch provide cooling for the internal components. When you install the switch, be sure to allow enough space on both sides of the switch for adequate airflo w . Features BayStack 350 switches provide wire-speed, F ast Eth ...

  • Bay Technical Associates 350 - page 39

    Getting Started 893-00992-B 1-5 • SNMP agent support for the follo wing Management Information Bases (MIBs): — Bridge MIB (RFC 1493) — Ethernet MIB (RFC 1643) — Proprietary MIBs — RMON MIB (RFC 1757) — MIB-II (RFC 1213) • Service port for console connection: Allows users to configure and manage the switch locally or remotely • TELN ...

  • Bay Technical Associates 350 - page 40

    Using the BayStack 350 10/100 Autosense Switch 1-6 893-00992-B • Front-panel light emitting diodes (LEDs) to monitor the follo wing: — Po wer status — System status — Per-port status for the follo wing: • 100 Mb/s link • 10 Mb/s link • Half- and full-duplex transmission • TX/RX acti vity • Management enable/disable • Upgradeable ...

  • Bay Technical Associates 350 - page 41

    Getting Started 893-00992-B 1-7 SNMP MIB Suppor t The BayStack 350 switch supports an SNMP agent with pri vate MIB extensions, which ensures compatibility with existing netw ork management tools. The BayStack 350 switch supports MIB-II (RFC 1213) and the RMON MIB (RFC 1757), which provide access to detailed management statistics. W ith SNMP managem ...

  • Bay Technical Associates 350 - page 42

    Using the BayStack 350 10/100 Autosense Switch 1-8 893-00992-B Connecting P ower W orkgroups Figure 1-3 shows BayStack 350 switches connecting dedicated po wer workgroups and standard departmental users. In this example, all users ha v e access to 10 Mb/s bandwidth or 100 Mb/s bandwidth on any port. Figure 1-3. BayStac k 350 switches f or power wor ...

  • Bay Technical Associates 350 - page 43

    Getting Started 893-00992-B 1-9 Desktop/Segment Switch Figure 1-4 sho ws power workgroups connected to serv ers through BayStack 350 switches in a small network. Network managers who do not w ant to provide each end station with the full 100 Mb/s bandwidth can designate a certain number of users that share the full bandwidth provided by one of the ...

  • Bay Technical Associates 350 - page 44

    Using the BayStack 350 10/100 Autosense Switch 1-10 893-00992-B Creating VLAN W orkgr oups Y ou can create and configure VLANs by segmenting networks into logical workgroups that are independent of physical connections and locations. Y ou can define the workgroups according to project or department. As shown in Figure 1-5, workgroup members on VL ...

  • Bay Technical Associates 350 - page 45

    Getting Started 893-00992-B 1-11 Quic k Star t This section provides Quick Start procedures for installing and setting up the BayStack 350 switch. It is intended for experienced installers or system administrators who are familiar with the BayStack 350 switch installation and setup procedures in this manual. If you hav e e xperience installing netw ...

  • Bay Technical Associates 350 - page 46

    Using the BayStack 350 10/100 Autosense Switch 1-12 893-00992-B Quic k Star t to Installing the Ba yStack 350 Switc h Y ou can use the installation flowchart (Figure 1-6) to install the BayStack 350 switch. If you need more information about any of the steps in the flo wchart, refer to the appropriate section in Chapter 2, “Installation. ” Fi ...

  • Bay Technical Associates 350 - page 47

    Getting Started 893-00992-B 1-13 Quic k Star t to Mana ging the BayStac k 350 Switch If you are already familiar with managing network de vices, you can use the Quick Start procedures in this section to set up and begin managing the BayStack 350 switch. The procedures assume that the BayStack 350 switch has been installed and verified (as describe ...

  • Bay Technical Associates 350 - page 48

    Using the BayStack 350 10/100 Autosense Switch 1-14 893-00992-B SNMP Management Applications If you are using an SNMP management application to manage the BayStack 350 switch, you must first assign an IP address to the switch so that the SNMP software can communicate with it. T o assign the BayStack 350 switch IP address, follow these steps: 1. Co ...

  • Bay Technical Associates 350 - page 49

    893-00992-B 2-1 Chapter 2 Installation Overview This chapter explains ho w to install the BayStack 350 10/100 Autosense Switch. The switch can be placed on a tabletop or shelf, mounted on a wall, or installed in a 19-inch equipment rack. T o install the BayStack 350 switch, you unpack the equipment, physically install the switch, connect the networ ...

  • Bay Technical Associates 350 - page 50

    Using the BayStack 350 10/100 Autosense Switch 2-2 893-00992-B P acka g e Contents While unpacking the equipment, verify that your BayStack 350 switch shipment includes all of the items sho wn in Figure 2-1. Figure 2-1. P ackage contents If any items are missing or damaged, contact the sales agent or the customer service representati ve from whom y ...

  • Bay Technical Associates 350 - page 51

    Installation 893-00992-B 2-3 Site Preparation This section describes what you need to do to prepare your site before installing the switch. Har dware V erify that you have the hardw are components appropriate for your method of installation: • Console terminal: Ensure that you hav e a console terminal av ailable. The console terminal must be a VT ...

  • Bay Technical Associates 350 - page 52

    Using the BayStack 350 10/100 Autosense Switch 2-4 893-00992-B Software V erify that you have the softw are components appropriate for your method of installation: • BootP server: The BayStack 350 switch can learn its IP address through BootP . T o use this feature, ensure that you have a properly configured BootP server in your netw ork. • TF ...

  • Bay Technical Associates 350 - page 53

    Installation 893-00992-B 2-5 Installing the Ba yStack 350 Switch This section explains ho w to install, power up, and v erify the operation of the BayStack 350 switch. Before you begin these procedures, read and follo w the instructions in “Site Preparation” on page 2-3 . Y ou can install the BayStack 350 switch in any of the following location ...

  • Bay Technical Associates 350 - page 54

    Using the BayStack 350 10/100 Autosense Switch 2-6 893-00992-B Attaching the Mounting Brac ket Figure 2-2 sho ws the mounting-bracket positions for mounting the BayStack 350 switch on a flat surface such as a tabletop, shelf, or wall. When rack mounting the switch, you use the same brackets, b ut position them to attach to the rack-mounting holes ...

  • Bay Technical Associates 350 - page 55

    Installation 893-00992-B 2-7 Installing on a T abletop or Shelf T o install the BayStack 350 switch on a tabletop or shelf, follow these steps: 1. Attach a rubber f ootpad to each corner on the bottom of the unit (Figure 2-3). 2. Position the switch on the tabletop or shelf , with the front panel facing y ou. Be sure to leav e adequate space around ...

  • Bay Technical Associates 350 - page 56

    Using the BayStack 350 10/100 Autosense Switch 2-8 893-00992-B W all Mounting Y ou can mount the BayStack 350 switch on any wall that can safely support the weight of the de vice and attached cables (see “Site Preparation” on page 2-3 for safety considerations). The BayStack 350 switch can be mounted with or without the rubber footpads. Before ...

  • Bay Technical Associates 350 - page 57

    Installation 893-00992-B 2-9 W all Mounting the Switch T o mount the BayStack 350 switch on a wall, follow these steps: 1. Using a Phillips (or cross-head) scr ewdriver , attach a mounting bracket to each side of the switch using the screws supplied with the unit (Figure 2-2). 2. Insert two scr ews (not supplied) through each of the mounting bracke ...

  • Bay Technical Associates 350 - page 58

    Using the BayStack 350 10/100 Autosense Switch 2-10 893-00992-B Rac k Mounting The BayStack 350 switch occupies one single-unit rack space and can be installed in most standard 19-inch racks. T o install the BayStack 350 switch in a 19-inch rack, follow these steps: 1. If rubber f ootpads are attached to the bottom of the unit, r emove them. 2. Loc ...

  • Bay Technical Associates 350 - page 59

    Installation 893-00992-B 2-11 4. Position the switch in the rack and align the holes in the mounting bracket with the holes in the rack chassis (Figur e 2-6). 5. Insert two scr ews (appropriate f or y our 19-inch rack, not supplied) through each of the mounting brack ets, then tighten the screws. 6. Proceed to “Connecting P ort Cables” on page ...

  • Bay Technical Associates 350 - page 60

    Using the BayStack 350 10/100 Autosense Switch 2-12 893-00992-B Connecting P or t Cables This section describes ho w to connect the BayStack 350 switch ports to the network. Depending on your network configuration requirements, connect the RJ-45 port cables, 100B ASE-FX port cables, or both. After connecting the port cables, proceed to “Connecti ...

  • Bay Technical Associates 350 - page 61

    Installation 893-00992-B 2-13 100B ASE-FX P or t Cables T o connect the 100BASE-FX port cables, align the k eyw ay on the cable plug with the ke y slot on the appropriate connector, then insert the cable plug into the fiber optic port connector (Figure 2-8). Figure 2-8. Connecting 100B ASE-FX por t cables After connecting the port cables, proceed ...

  • Bay Technical Associates 350 - page 62

    Using the BayStack 350 10/100 Autosense Switch 2-14 893-00992-B Connecting P ower The BayStack 350 switch does not hav e a po wer on/of f switch. When you connect the A C po wer cord to a suitable A C outlet, the switch powers up immediately . T o connect the A C power cord, follo w these steps: 1. Plug one end of the A C power cord into the A C po ...

  • Bay Technical Associates 350 - page 63

    Installation 893-00992-B 2-15 V erifying the Installation T o verify proper operation of the BayStack 350 switch, observe the front-panel LEDs as described in T able 2-1. Figure 2-9. Observing LEDs to verify proper operation After verifying proper operation of the BayStack 350 switch, refer to Chapter 3, “Using the Console Interface, ” to con? ...

  • Bay Technical Associates 350 - page 64

    350fbk.book Page 16 Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 65

    893-00992-B 3-1 Chapter 3 Using the Console Interface Overview This chapter describes ho w to configure and manage the BayStack 350 10/100 Autosense Switch using the menu-dri ven console interface (CI). Y ou can access the CI menus and screens through the service port located on the switch back panel. Y ou can also manage the BayStack 350 switch u ...

  • Bay Technical Associates 350 - page 66

    Using the BayStack 350 10/100 Autosense Switch 3-2 893-00992-B Service P or t Cab ling Y ou can connect a console terminal directly to the BayStack 350 switch service port, or you can connect a modem to the switch service port for remote access to the CI menus and screens. Console T erminal Requirements T o connect a console terminal to the BayStac ...

  • Bay Technical Associates 350 - page 67

    Using the Console Interface 893-00992-B 3-3 Connecting to the Ba yStac k 350 Switch Service P or t T o connect a console terminal or modem to the BayStack 350 switch service port, follo w these steps: 1. Plug the RS-232 cable DB-9 receptacle into the ser vice port plug. Secure the connection by tightening the two scr ews on the DB-9 receptacle. 2. ...

  • Bay Technical Associates 350 - page 68

    Using the BayStack 350 10/100 Autosense Switch 3-4 893-00992-B Using the CI Menus and Screens The CI menus and screens provide commands that allo w you to configure and manage the BayStack 350 switch. Help prompts at the bottom of each menu and screen explain ho w to enter data in the highlighted field and how to na vigate the CI menus and screen ...

  • Bay Technical Associates 350 - page 69

    Using the Console Interface 893-00992-B 3-5 Screen Fields and Descriptions Figure 3-1 sho ws a map of the CI screens. The remainder of this chapter describes the CI screens and their fields, beginning with the main menu. Figure 3-1. Map of console interface screens The CI screen examples pro vided in this chapter are for a BayStack Model 350T swit ...

  • Bay Technical Associates 350 - page 70

    Using the BayStack 350 10/100 Autosense Switch 3-6 893-00992-B Main Menu This section describes the commands av ailable from the CI main menu (Figure 3-2). The CI screens and submenus for these commands are described in the follo wing sections. Figure 3-2. Console interface main menu Note: The field v alues shown in the CI screens in this section ...

  • Bay Technical Associates 350 - page 71

    Using the Console Interface 893-00992-B 3-7 T able 3-1 describes the CI main menu commands. T able 3-1. Console interface main menu commands Command Description IP Configuration... Displa ys the IP Configuration screen (see “IP Configuration” on page 3-9 ). This screen allo ws you to set or modify IP configuration parameters. SNMP Configur ...

  • Bay Technical Associates 350 - page 72

    Using the BayStack 350 10/100 Autosense Switch 3-8 893-00992-B Reset to Default Settings Resets the s witch to the f actory default configur ation settings . When y ou select this command, the s witch resets, runs a self-test, and displa ys the main menu. Caution: If you choose the Reset to Def ault Settings command, all of your configured settin ...

  • Bay Technical Associates 350 - page 73

    Using the Console Interface 893-00992-B 3-9 IP Configuration The IP Configuration screen (Figure 3-3) allo ws you to set or modify the BayStack 350 switch IP configuration parameters. Data that you enter in the user-configurable fields tak es effect as soon as you press [Enter]. Figure 3-3. IP Configuration screen Note: The read-only fields ...

  • Bay Technical Associates 350 - page 74

    Using the BayStack 350 10/100 Autosense Switch 3-10 893-00992-B T able 3-2 describes the IP Configuration screen fields. T able 3-2. IP Configuration screen fields Field Description BootP Request Mode One of f our modes of operation f or BootP . (See “Choosing a BootP Request Mode” on page 3-11 f or details about the four modes.) Def ault V ...

  • Bay Technical Associates 350 - page 75

    Using the Console Interface 893-00992-B 3-11 Choosing a BootP Request Mode The BootP Request Mode field in the IP Configuration screen allo ws you to choose which method the switch uses to broadcast BootP requests: • BootP When Needed • BootP Always • BootP Disabled • BootP or Last Address The follo wing sections describe the BootP reques ...

  • Bay Technical Associates 350 - page 76

    Using the BayStack 350 10/100 Autosense Switch 3-12 893-00992-B BootP Alwa ys This mode allo ws the switch to be managed only when configured with the IP address obtained from the BootP server . When selected, this mode operates as follo ws: • The switch continues to broadcast BootP requests, regardless of whether an in-band IP address is set fr ...

  • Bay Technical Associates 350 - page 77

    Using the Console Interface 893-00992-B 3-13 BootP or Last Address This mode allo ws the switch to be managed even if a BootP serv er is not be reachable. When selected, this mode operates as follo ws: • When the IP data is entered from the console terminal, the data becomes the in-band address of the switch and BootP requests are not broadcast. ...

  • Bay Technical Associates 350 - page 78

    Using the BayStack 350 10/100 Autosense Switch 3-14 893-00992-B SNMP Configuration The SNMP Configuration screen (Figure 3-4) allo ws you to set or modify the SNMP configuration parameters. Figure 3-4. SNMP Configuration screen SNMP Configuration Read-Only Community String: [ public ] Read-Write Community String: [ private ] Trap #1 IP Address: ...

  • Bay Technical Associates 350 - page 79

    Using the Console Interface 893-00992-B 3-15 T able 3-3 describes the SNMP Configuration screen fields. *. The T rap IP Address and Community String fields can be set using a MIB table (in a Ba y Netw orks proprietar y MIB). The status of the row in the MIB tab le can be set to Ignore . If the row status is set to Ignore, the fields appear to b ...

  • Bay Technical Associates 350 - page 80

    Using the BayStack 350 10/100 Autosense Switch 3-16 893-00992-B System Characteristics The System Characteristics screen (Figure 3-5) allo ws you to view system characteristics and contains three user-configurable fields: sysContact, sysName, and sysLocation. Figure 3-5. System Characteristics screen System Characteristics MAC Address: 00-60-FD-0 ...

  • Bay Technical Associates 350 - page 81

    Using the Console Interface 893-00992-B 3-17 T able 3-4 describes the System Characteristics screen fields. *. Although this field can be set up to 255 characters from a Network Management Station (NMS), only 56 characters are display ed on the console ter minal. T able 3-4. System Characteristics screen fields Field Description MA C Address The ...

  • Bay Technical Associates 350 - page 82

    Using the BayStack 350 10/100 Autosense Switch 3-18 893-00992-B Switch Configuration The Switch Configuration Menu (Figure 3-6) allo ws you to set or modify your switch configuration. Figure 3-6. Switch Configuration Menu Switch Configuration Menu M AC Address Table V LAN Configuration... P ort Configuration... Rate L imiting Configuration... D ...

  • Bay Technical Associates 350 - page 83

    Using the Console Interface 893-00992-B 3-19 T able 3-5 describes the Switch Configuration Menu commands. T able 3-5. Switch Configuration Menu commands Command Description MA C Address T able Displays the MA C Address T able screen (see “MA C Address T able” on page 3-20 ). This screen allo ws you to view the MA C addresses that the switch h ...

  • Bay Technical Associates 350 - page 84

    Using the BayStack 350 10/100 Autosense Switch 3-20 893-00992-B MA C Address T able The MA C Address T able screen (Figure 3-7) allo ws you to vie w the MAC addresses that the switch has learned. Y ou can also use this screen to search for a specific MA C address. Figure 3-7. MA C Address T able screen Note: This screen does not refresh dynamicall ...

  • Bay Technical Associates 350 - page 85

    Using the Console Interface 893-00992-B 3-21 T able 3-6 describes the MAC Address T able screen fields. T able 3-6. MA C Address T able screen fields Field Description Aging Time Specifies how long a learned MAC address remains in the s witch’ s forwarding database. If an entr y is inactiv e for a period of time that exceeds the specified agi ...

  • Bay Technical Associates 350 - page 86

    Using the BayStack 350 10/100 Autosense Switch 3-22 893-00992-B VLAN Configuration The VLAN Configuration screen (Figure 3-8) allo ws you to configure the BayStack 350 switch with up to eight virtual LANs (VLANs). The screen provides a matrix that you use to group the switch ports into logical (virtual) workgroups. Users in each logical workgrou ...

  • Bay Technical Associates 350 - page 87

    Using the Console Interface 893-00992-B 3-23 Y ou can create VLANs for one BayStack 350 switch, or you can create VLANs that span multiple switches. Ho wever , each switch that participates in the VLAN configuration must be configured separately . Y ou can also assign multiple VLANs to a port connected to a server , which allows the server to be ...

  • Bay Technical Associates 350 - page 88

    Using the BayStack 350 10/100 Autosense Switch 3-24 893-00992-B Sample VLAN Configuration Figure 3-9 shows an e xample of a VLAN configuration that spans multiple BayStack 350 switches. Each switch (S1, S2, and S3) participates in the VLAN configuration and is configured indi vidually . Figure 3-9. VLAN configuration spanning multiple Ba yStac ...

  • Bay Technical Associates 350 - page 89

    Using the Console Interface 893-00992-B 3-25 Figure 3-10 , Figure 3-11 , and Figure 3-12 sho w the VLAN Configuration screen settings for switches S1, S2, and S3, respecti vely . Figure 3-10. VLAN Configuration screen f or switch S1 VLAN Configuration Port V1 V2 V3 V4 V5 V6 V7 V8 ---- ----- ----- ----- ----- ----- ----- ----- ----- 1 [ X ] [ X ] ...

  • Bay Technical Associates 350 - page 90

    Using the BayStack 350 10/100 Autosense Switch 3-26 893-00992-B Figure 3-11. VLAN Configuration screen f or switch S2 VLAN Configuration Port V1 V2 V3 V4 V5 V6 V7 V8 ---- ----- ----- ----- ----- ----- ----- ----- ----- 1 [ X ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 2 [ x ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 3 [ x ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 4 [ ] [ ] [ ] [ ] [ ] ...

  • Bay Technical Associates 350 - page 91

    Using the Console Interface 893-00992-B 3-27 Figure 3-12. VLAN Configuration screen f or switch S3 VLAN Configuration Port V1 V2 V3 V4 V5 V6 V7 V8 ---- ----- ----- ----- ----- ----- ----- ----- ----- 1 [ x ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 2 [ ] [ X ] [ ] [ ] [ ] [ ] [ ] [ ] 3 [ ] [ x ] [ ] [ ] [ ] [ ] [ ] [ ] 4 [ x ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 5 [ x ...

  • Bay Technical Associates 350 - page 92

    Using the BayStack 350 10/100 Autosense Switch 3-28 893-00992-B P or t Configuration The Port Configuration screen ( Figure 3-13 ) allo ws you to configure a specific switch port or all switch ports. Y ou can set the switch ports to autonegotiate for the highest av ailable speed of the connected station, or you can set the speed for selected sw ...

  • Bay Technical Associates 350 - page 93

    Using the Console Interface 893-00992-B 3-29 T able 3-7 describes the Port Configuration screen fields. *. Y ou cannot modify this field for the Ba yStack Model 350F s witch 100BASE-FX fiber optic por ts (por ts 13 and 14). †. The BayStack Model 350F s witch 100BASE-FX fiber optic por ts (ports 13 and 14) can be set to 100 Mbs/Half or 100 Mb ...

  • Bay Technical Associates 350 - page 94

    Using the BayStack 350 10/100 Autosense Switch 3-30 893-00992-B Rate Limiting Configuration The Rate Limiting Configuration screen (Figure 3-14) allo ws you to limit the forwarding rate of broadcast and multicast packets. Y ou can use this screen to view the percentage of broadcast packets and multicast packets recei v ed, on a per-port basis. Wh ...

  • Bay Technical Associates 350 - page 95

    Using the Console Interface 893-00992-B 3-31 T able 3-8 describes the Rate Limiting Configuration screen fields. *. Rate limiting is disabled if this field is set to None. This allows you to select and vie w the percentage of specific pack et types present in the network, without inadvertently limiting the forwarding r ate. T able 3-8. Rate Lim ...

  • Bay Technical Associates 350 - page 96

    Using the BayStack 350 10/100 Autosense Switch 3-32 893-00992-B P or t Statistics The Port Statistics screen ( Figure 3-15 ) allo ws you to view detailed information about a switch port. The screen is di vided into two sections (Recei ved and T ransmitted) so that you can compare and ev aluate throughput or other port parameters. All screen data is ...

  • Bay Technical Associates 350 - page 97

    Using the Console Interface 893-00992-B 3-33 T able 3-9 describes the Port Statistics screen fields. Note: W ith the exception of the Port field, all fields in this screen are read-only . T able 3-9. P or t Statistics screen fields Field Description Po r t Allows y ou to select the number of the por t you w ant to view . T o view another port, ...

  • Bay Technical Associates 350 - page 98

    Using the BayStack 350 10/100 Autosense Switch 3-34 893-00992-B Undersized P ackets Indicates the total n umber of pack ets received on this por t with less than 64 b ytes and with proper CRC and framing (also known as short frames or runts). Oversized P ackets Indicates the total number of pac kets received on this port with greater than 1518 byte ...

  • Bay Technical Associates 350 - page 99

    Using the Console Interface 893-00992-B 3-35 Flooded P ackets Indicates the total number of pac kets flooded (forw arded) through this por t because the destination address was not in the address database . Deferred P ackets Indicates the total number of frames that w ere delayed on the first tr ansmission attempt, but ne ver incurred a collision ...

  • Bay Technical Associates 350 - page 100

    Using the BayStack 350 10/100 Autosense Switch 3-36 893-00992-B Clear P or t Statistics The Clear Port Statistics screen (Figure 3-16) allo ws you to reset to zero the port counters displayed in the Port Statistics screen. Y ou can reset the port counters for a specific port or for all ports. Figure 3-16. Clear P ort Statistics screen T able 3-10 ...

  • Bay Technical Associates 350 - page 101

    Using the Console Interface 893-00992-B 3-37 Service P or t Configuration The Service Port Configuration screen ( Figure 3-17 ) allo ws you to configure and modify the switch service port parameters. Figure 3-17. Service P or t Configuration screen T able 3-11 describes the Service Port Configuration screen fields. T able 3-11. Service Port C ...

  • Bay Technical Associates 350 - page 102

    Using the BayStack 350 10/100 Autosense Switch 3-38 893-00992-B Console P or t Speed Allows y ou to set the switch service por t baud rate to match the baud rate of the console terminal. Caution: If you choose a baud rate that does not match y our console ter minal baud rate, y ou will lose comm unication with the configuration interf ace when you ...

  • Bay Technical Associates 350 - page 103

    Using the Console Interface 893-00992-B 3-39 Spanning T ree Configuration The Spanning T ree Configuration Menu ( Figure 3-18 ) allows you to vie w spanning tree parameters and configure indi vidual switch ports to participate in the spanning tree algorithm (ST A). T o modify any of the spanning tree parameters, refer to your SNMP documentation. ...

  • Bay Technical Associates 350 - page 104

    Using the BayStack 350 10/100 Autosense Switch 3-40 893-00992-B Spanning T ree P or t Configuration The Spanning T ree Port Configuration screen (Figure 3-19) allows you to configure indi vidual switch ports or all switch ports for participation in the ST A. Figure 3-19. Spanning T ree P or t Configuration screen Spanning Tree Port Configuratio ...

  • Bay Technical Associates 350 - page 105

    Using the Console Interface 893-00992-B 3-41 T able 3-13 describes the Spanning T ree Port Configuration screen fields. T able 3-13. Spanning T ree Port Configuration screen fields Field Description Po r t Indicates the s witch por t numbers, from 1 to 16, that correspond to the field settings in that row of the screen (f or example , the fie ...

  • Bay Technical Associates 350 - page 106

    Using the BayStack 350 10/100 Autosense Switch 3-42 893-00992-B Displa y Spanning T ree Switch Settings The Spanning T ree Switch Settings screen (Figure 3-20) allows you to vie w spanning tree parameter settings for the BayStack 350 switch. Figure 3-20. Spanning T ree Switch Settings screen Spanning Tree Switch Settings Bridge Priority: 8000 Desig ...

  • Bay Technical Associates 350 - page 107

    Using the Console Interface 893-00992-B 3-43 T able 3-14 describes the Spanning T ree Switch Settings parameters. T able 3-14. Spanning T ree Switch Settings parameters P arameter Description Bridge Priority Indicates the management-assigned prior ity v alue of the bridge ID in hexadecimal notation, which is the most significant byte of the bridge ...

  • Bay Technical Associates 350 - page 108

    Using the BayStack 350 10/100 Autosense Switch 3-44 893-00992-B Forward Dela y Indicates the F orward Delay par ameter value that the root bridge is currently using. This value specifies the amount of time that the bridge por ts remain in the Listening and Learning states before entering the Forw arding state. Note that the root bridge’ s F orwa ...

  • Bay Technical Associates 350 - page 109

    Using the Console Interface 893-00992-B 3-45 TELNET Configuration The TELNET Configuration screen (Figure 3-21) allo ws a user at a remote console terminal to communicate with the BayStack 350 switch as if the console terminal were directly connected to it. Y ou can hav e up to four activ e TELNET sessions at one time. Figure 3-21. TELNET Config ...

  • Bay Technical Associates 350 - page 110

    Using the BayStack 350 10/100 Autosense Switch 3-46 893-00992-B T able 3-15. TELNET Configuration screen fields Field Description TELNET Access Allows a user remote access to the CI through a TELNET session. Def ault V alue Enabled Range Enab led, Disabled Login Timeout Specifies the amount of time a user has to enter the correct passw ord at th ...

  • Bay Technical Associates 350 - page 111

    Using the Console Interface 893-00992-B 3-47 Allowed Sour ce IP Address Specifies up to 10 user-assigned host IP addresses that are allo wed TELNET access to the CI. Def ault V alue 0.0.0.0 (no IP address assigned) Range F our-octet decimal IP address notation, where each octet of the address is represented as a decimal value , separated by a deci ...

  • Bay Technical Associates 350 - page 112

    Using the BayStack 350 10/100 Autosense Switch 3-48 893-00992-B Software Download The Software Do wnload screen (Figure 3-22) allows you to re vise the BayStack 350 switch software image that is located in non volatile flash memory . T o do wnload the BayStack 350 switch software image, a properly configured T rivial File T ransfer Protocol (TFTP ...

  • Bay Technical Associates 350 - page 113

    Using the Console Interface 893-00992-B 3-49 T able 3-16 describes the Software Download screen fields. LED Indications During the Download Pr ocess The software do wnload process is automated so that once initiated, it runs to completion without user intervention. The download process erases the contents of flash memory and replaces it with a ne ...

  • Bay Technical Associates 350 - page 114

    Using the BayStack 350 10/100 Autosense Switch 3-50 893-00992-B T able 3-17 describes the LED indications during the software download process. Note: T able 3-17 describes the LED indications displayed by the BayStack Model 350T (16 port) switch. The BayStack Model 350F (14 port) switch LED indications are similar , but the LED patterns correspond ...

  • Bay Technical Associates 350 - page 115

    Using the Console Interface 893-00992-B 3-51 Displa y Event Log The Event Log screen (Figure 3-23) pro vides information about the following topics: • Software do wnload: Indicates the new software v ersion. • A uthentication failure: Indicates any attempted SNMP get or set access that used an in valid community string. • TELNET session statu ...

  • Bay Technical Associates 350 - page 116

    Using the BayStack 350 10/100 Autosense Switch 3-52 893-00992-B Excessive Bad Entries If the firmware detects e xcessive errors in the e vent log’ s flash memory (errors exceeding 75 percent of the memory b uffer), the e vent log is cleared (that is, all entries are discarded) and an e vent entry is displayed in the Event Log screen. Figure 3-2 ...

  • Bay Technical Associates 350 - page 117

    Using the Console Interface 893-00992-B 3-53 Reset The Reset command allo ws you to reset the switch without erasing any configured switch parameters. Resetting the switch takes approximately fiv e seconds to complete. During this time, the switch initiates a self-test that comprises v arious diagnostic routines and subtests. The results of the s ...

  • Bay Technical Associates 350 - page 118

    Using the BayStack 350 10/100 Autosense Switch 3-54 893-00992-B Reset to Default Settings The Reset to Default Settings command allo ws you to reset the switch and replace all configured switch parameters with the factory default settings. F or a list of factory default settings, refer to Appendix C, “Switch Def ault Settings. ” The Reset to D ...

  • Bay Technical Associates 350 - page 119

    Using the Console Interface 893-00992-B 3-55 Logout The Logout command allo ws a user working at a password-protected console terminal or in an acti ve TELNET session to terminate the session. The Logout command works as follo ws: • If the user is accessing the BayStack 350 switch through a TELNET session, the Logout command terminates the sessio ...

  • Bay Technical Associates 350 - page 120

    350fbk.book Page 56 Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 121

    893-00992-B 4-1 Chapter 4 T r oubleshooting Overview This chapter explains ho w to isolate and diagnose problems with your BayStack 350 10/100 Autosense Switch. This chapter is organized to help lead you through a logical process for troubleshooting your BayStack 350 switch. For e xample, because the LEDs provide visual indications of problems, the ...

  • Bay Technical Associates 350 - page 122

    Using the BayStack 350 10/100 Autosense Switch 4-2 893-00992-B LED Indications The BayStack 350 switch LEDs are located on the front panel (see Figure 4-1). Figure 4-1. LED locations T able 4-1 describes the BayStack 350 switch LEDs, as numbered in Figure 4-1. 7470EA 1234 567 Diagnostics Power FD x 234567 8 100 10 Activity Activity F Dx 10 100 15 1 ...

  • Bay Technical Associates 350 - page 123

    Troubleshooting 893-00992-B 4-3 *. Not av ailable on the BayStac k Model 350F fiber optic por ts 13 and 14. T able 4-1. LED indications Item Icon/Label Description 1 P ower P ower LED (green) On: DC power is a vailable to the s witch’ s inter nal circuitry . 2 Diagnostics Diagnostics LED (green) On: The switch passes the self-test. Blinking: A n ...

  • Bay Technical Associates 350 - page 124

    Using the BayStack 350 10/100 Autosense Switch 4-4 893-00992-B Diagnosing and Correcting the Pr oblem Before you perform the problem-solving steps in this section, cycle the po wer to the BayStack 350 switch (disconnect and then reconnect the A C po wer cord); then, verify that the switch follo ws the normal power -up sequence. Normal P ower -up Se ...

  • Bay Technical Associates 350 - page 125

    Troubleshooting 893-00992-B 4-5 P or t Connection Pr oblems Port connection problems can usually be traced to a poor cable connection or an improper connection of the port cables at either end of the link. These types of problems can be remedied by making sure that the cable connections are secure and that the cables are connected to the correct po ...

  • Bay Technical Associates 350 - page 126

    Using the BayStack 350 10/100 Autosense Switch 4-6 893-00992-B • If the autonegotiation feature is not present or is not enabled, at the connected station, the BayStack 350 switch may not be able to determine the correct duplex mode. In both situations, the BayStack 350 switch “autosenses” the speed of the connected port and, by default, re v ...

  • Bay Technical Associates 350 - page 127

    893-00992-B A-1 Appendix A T echnical Specifications This appendix lists the technical specifications for the BayStack 350 10/100 Autosense Switch. En vironmental Electrical Ph ysical Dimensions T emperature: Operating: 0 o to 40 o C (32 o to 104 o F) Storage: -25 ° to 70 ° C (-13 ° to 158 ° F) Humidity: Operating: 85% maximum relative humidi ...

  • Bay Technical Associates 350 - page 128

    Using the BayStack 350 10/100 Autosense Switch A-2 893-00992-B P erformance Specifications Netw ork Protocol and Standar ds Compatibility Data Rate Interface Options Safety Agency Certification F rame Forw ard Rate (64-byte pac kets): 1.6 million pack ets per second (pps) maximum, lear ned unicast traffic P or t F orwarding/Filtering P erformanc ...

  • Bay Technical Associates 350 - page 129

    Technical Specifications 893-00992-B A-3 Electr omagnetic Emissions Electr omagnetic Susceptibility • FCC P ar t 15, Subpar t B, Class A • EN55022 (CISPR 22: 1985), Class A • VCCI Class 1 ITE • A ustralian AS 3548 EN50082-1 350fbk.book Page 3 Wednesday, July 9, 1997 4:51 PM ...

  • Bay Technical Associates 350 - page 130

    Using the BayStack 350 10/100 Autosense Switch A-4 893-00992-B Dec laration of Conformity The follo wing Declaration of Conformity for the BayStack 350 10/100 Autosense Switch complies with ISO/IEC Guide 22 and EN45014. The declaration identifies the product, the Bay Networks name and address, and the applicable specifications recognized by the E ...

  • Bay Technical Associates 350 - page 131

    893-00992-B B-1 Appendix B Connector s and Pin Assignments This appendix describes the BayStack 350 10/100 Autosense Switch port connectors and pin assignments. RJ-45 (10B ASE-T/100B ASE-TX) P or t Connector s The RJ-45 port connectors (Figure B-1) are wired as MDI-X ports to connect end stations without using crossov er cables. (Refer to “MDI an ...

  • Bay Technical Associates 350 - page 132

    Using the BayStack 350 10/100 Autosense Switch B-2 893-00992-B T able B-1 lists the RJ-45 (8-pin modular) port connector pin assignments. MDI and MDI-X Devices Media Dependent Interface (MDI) is the IEEE standard for the interface to unshielded twisted pair (UTP) cable. In order for two de vices to communicate, the transmitter of one device must co ...

  • Bay Technical Associates 350 - page 133

    Connectors and Pin Assignments 893-00992-B B-3 MDI-X to MDI Cable Connections BayStack 350 switches use MDI-X ports that allo w you to connect directly to end stations without using crossov er cables (Figure B-2). Figure B-2. MDI-X to MDI cab le connections 18 18 81 81 RX+ RX- TX+ TX- TX+ TX- RX+ RX- MDI-X port BayStack 350 switch End station Strai ...

  • Bay Technical Associates 350 - page 134

    Using the BayStack 350 10/100 Autosense Switch B-4 893-00992-B MDI-X to MDI-X Cable Connections If you are connecting the BayStack 350 switch to a de vice that also implements MDI-X ports, use a crossov er cable (Figure B-3). Figure B-3. MDI-X to MDI-X cab le connections 18 18 81 81 RX+ RX- TX+ TX- RX+ RX- TX+ TX- MDI-X port BayStack 350 switch Swi ...

  • Bay Technical Associates 350 - page 135

    Connectors and Pin Assignments 893-00992-B B-5 DB-9 (RS-232-D) Service P or t Connector The DB-9 service port connector (Figure B-4) is configured as a data communications equipment (DCE) de vice connector . The DSR and CTS signal outputs are always asserted; the CD, DTR, R TS, and RI signal inputs are not used. This configuration enables a manag ...

  • Bay Technical Associates 350 - page 136

    Using the BayStack 350 10/100 Autosense Switch B-6 893-00992-B 100B ASE-FX Fiber Optic P or t Connectors The BayStack 350F switch provides tw o duplex SC connectors for supporting switched 100 Mb/s Fast Ethernet connections o ver 50/125 and 62.5/125 micron multimode fiber optic cable. Figure B-5 sho ws a 100BASE-FX multimode fiber optic port conn ...

  • Bay Technical Associates 350 - page 137

    893-00992-B C-1 Appendix C Switch Default Settings T able C-1 lists the factory default settings for the BayStack 350 switch. T able C-1. Factory default settings f or the BayStack 350 s witch Field Default Setting Appears in This CI Screen BootP Request Mode BootP When Needed IP Configuration In-Band IP Address 0.0.0.0 (no IP address assigned) In ...

  • Bay Technical Associates 350 - page 138

    Using the BayStack 350 10/100 Autosense Switch C-2 893-00992-B *. This field is not availab le for the Ba yStack 350F switch 100BASE-FX fiber optic ports (por ts 13 and 14). P acket T ype Both Rate Limiting Configuration Limit None P or t 1 P or t Statistics Clear Statistics f or Port 1 Clear P or t Statistics Console P or t Speed 9600 Baud Serv ...

  • Bay Technical Associates 350 - page 139

    893-00992-B D-1 Appendix D Sample BootP Configuration File This appendix provides a sample BootP configuration file. The BootP server searches for this file, called bootptab (or BOO TPT AB.TXT , depending on your operating system), which contains the site-specific information (including IP addresses) needed to perform the software do wnload an ...

  • Bay Technical Associates 350 - page 140

    Using the BayStack 350 10/100 Autosense Switch D-2 893-00992-B # Caution # # Omitting a Forward slash (/) when the entry is continued to the next line, # can cause the interruption of the booting process or the incorrect image file # to download. Always include forward slashes where needed. # # Important Note: # # If a leading zero (0) is used in t ...

  • Bay Technical Associates 350 - page 141

    893-00992-B Index-1 A Acti vity LEDs, 1-3 Aging T ime field, 3-21 Allowed Source IP Address field, 3-47 Allowed Source Mask field, 3-47 Authentication T rap field, 3-15 Auto Negotiation field, 3-29 autonegotiation modes description, 1-5 troubleshooting, 4-5 B bandwidth, mixing, 1-8 Bay Networks Press, xvii Bay Netw orks W orld W ide W eb page, ...

  • Bay Technical Associates 350 - page 142

    Index-2 893-00992-B Community String field, 3-15 components of BayStack 350 switch, 1-2 Configurable field, 3-10 connectors, 1-3, B-1 console interface (CI) access options, 3-1 description, 3-1 main menu, 3-6 menus, accessing, 3-3 menus, using, 3-4 Console Password field, 3-38 Console Port Speed field, 3-38 Console Read-Only Passw ord field, ...

  • Bay Technical Associates 350 - page 143

    893-00992-B Index-3 console terminal, 2-3 en vironmental specifications, 2-4 installation flo wchart, 1-12 LED verification, 2-15 mounting brackets, 2-3 network cable preparation, 2-3 package contents, 2-2 Quick Start, 1-12 rack mounting, 2-10 required servers, 2-4 required tools, 2-1 software requirements, 2-4 surface mounting, 2-5 tabletop or ...

  • Bay Technical Associates 350 - page 144

    Index-4 893-00992-B Participation field, 3-41 password prompt screen, 3-55 Path Cost field, 3-41 pin assignments, B-1 port cables, connecting, 2-12 Port Configuration command, 3-19 Port Configuration screen, 3-28 port connections, troubleshooting, 4-5 port connector LEDs, 1-3 Port field, 3-29, 3-33, 3-41 Port Statistics screen, 3-32 port statu ...

  • Bay Technical Associates 350 - page 145

    893-00992-B Index-5 download process, 3-49 image upgrades, 1-6 requirements, 2-4 Software Do wnload command, 3-7 Software Do wnload screen, 3-48 Spanning T ree Configuration command, 3-7 Spanning T ree Configuration Menu, 3-39 Spanning T ree Port Configuration command, 3-39 Spanning T ree Port Configuration screen, 3-40 Spanning T ree Protocol, ...

  • Bay Technical Associates 350 - page 146

    350fbk.book Page 6 Wednesday, July 9, 1997 4:51 PM ...

Produzent Bay Technical Associates Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Bay Technical Associates 350 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Bay Technical Associates
- Bedienungsanleitungen 350
- Produktkarten Bay Technical Associates
- Informationsbroschüren
- oder Energieetiketten Bay Technical Associates 350
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Bay Technical Associates 350.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Bay Technical Associates 350, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Bay Technical Associates 350. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Bay Technical Associates 350 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Bay Technical Associates 350, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Bay Technical Associates 350 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Bay Technical Associates 350 verständlich ist.

Eine gänzliche Bedienungsanleitung von Bay Technical Associates sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Bay Technical Associates 350 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Bay Technical Associates 350 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Bay Technical Associates 350, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Bay Technical Associates 350 - die uns die ersten Schritte während der Nutzung von Bay Technical Associates 350 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Bay Technical Associates 350 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Bay Technical Associates 350 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Bay Technical Associates 350?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Bay Technical Associates 350 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Bay Technical Associates 350 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)