Deutsch dropdown-ico

Bedienungsanleitung Agilent Technologies N2610A

248 Seiten 4.37 mb
Download

Zur Seite of 248

Summary
  • Agilent Technologies N2610A - page 1

    Agilent T echnologies Agil ent N26 10A Frame Scope 350 Network Performance Analyzer User’ s Manual Ve r s i o n 3 . 0 ...

  • Agilent Technologies N2610A - page 2

    Not ices © 2002 Ag il e nt T e ch n olo gies , Inc. No part o f this manual may be rep roduced in an y f orm or by an y mean s (i nclud ing ele ctroni c stor age an d ret rieva l or tr ansl a- tion into a foreign l a nguage) with out prior agr eem en t a nd w rit ten con se nt fr o m Agi- len t T echnologi es , Inc. a s gove rn ed by Unit ed S tat ...

  • Agilent Technologies N2610A - page 3

    Agil ent F rameScope 35 0 Us er’ s Manual i i i In This Gu ide… This user’s guid e cont ains inform ation f or u s ing you r FrameScop e 350 handh eld netw ork performan ce anal yze r usin g softwa re vers ion 3. 0.2. Not e t hat some syst ems r u nnin g earlie r software ma y not pr o vide al l of the f e atures d escr ibe d in this manual; ...

  • Agilent Technologies N2610A - page 4

    iv Agile nt FrameScope 350 User’s M anua l ...

  • Agilent Technologies N2610A - page 5

    Agil ent F rameScope 35 0 Us er’ s Manual v Conte n ts 1 Introducing the FrameScope 350 The Fra meScop e 350 at a Glance 2 The Dua lRemote 350 at a Gla nce 6 The M ain M enu at a Glance 7 Getting Started 10 2 Netw ork T est ing with t h e Fram eScope 350 Net work T esting Ov erview 16 Ex amin in g the Netwo rk 1 7 Runn ing an Auto t est 19 Chang ...

  • Agilent Technologies N2610A - page 6

    vi Agile nt FrameScope 350 User’s M anua l Us i ng Co mp actF la sh ™ Ca rds 88 Pr in ti ng La be ls 90 4F i b e r T e s t i n g Fi ber T esting O ver vi ew 94 Cal i br atin g th e T ester 96 Set ting Up a n Au totest 101 Runn ing an Auto t est 114 5 Cable T esting in Expert Mode T est ing Overvi ew 117 Chang i n g to Expert Mode 118 The Exp er ...

  • Agilent Technologies N2610A - page 7

    Agil ent F rameScope 35 0 Us er’ s Manual vii Pr in te r Setu p 16 9 Net w ork Settings 17 0 Remot e Control 173 SNMP Settings 174 Demo Mode 175 8 Network Performance A na lyzer Reference Net work Conn ec tion 179 Net work Databa se 181 Net work Performa nce A utot est 184 Statistics 202 Net work T ools 20 5 Remot e Control 209 M emor y Req uirem ...

  • Agilent Technologies N2610A - page 8

    viii Agile nt FrameScope 350 Use r ’ s Manual ...

  • Agilent Technologies N2610A - page 9

    1 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 1 Int rodu cin g t he Fr ame Scop e 350 The Fram eScop e 350 at a Glance 2 Front View 2 Side V iews 3 Cont rols 4 Po r ts 4 The Dual Remote 350 at a Gla nce 6 The M ain M enu at a Glance 7 The N etwork T ab 8 The Ca ble T ab 9 Getting ...

  • Agilent Technologies N2610A - page 10

    2 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 The Fram eScope 3 50 at a Gl ance Th e FrameSc ope 350 at a Glan ce Front Vi ew Figure 1 Fram eScope 3 50 Front View Smar tPr obe port ( t op) Stra p c leat Col or t o u ch scree n Pow e r bu tton Co mpactF las h ™ mem ory card sl ot (botto m) OK butto n Scro ll bu t t ...

  • Agilent Technologies N2610A - page 11

    Intr oduc ing th e Fra meScop e 35 0 1 The F ram e S co p e 35 0 at a Gl ance Agil ent F rameScope 35 0 Us er’ s Manual 3 Side View s Figure 2 Left Side Figure 3 Right Side Sty lus c lip USB po rt s DC Pow er inpu t Ba tter y pack ( back) Head set po rt Seri a l port Flip -out stan d (bac k) ...

  • Agilent Technologies N2610A - page 12

    4 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 The Fram eScope 3 50 at a Gl ance Controls Color T ouch Sc r een The FrameScope 35 0’s touch scre en is the main use r inte rface. T est contr ol s and resul ts are sho w n here. Si m ply press the s cree n wi th y our finger or a stylus t o na vig ate thro ugh the m e ...

  • Agilent Technologies N2610A - page 13

    Intr oduc ing th e Fra meScop e 35 0 1 The F ram e S co p e 35 0 at a Gl ance Agil ent F rameScope 35 0 Us er’ s Manual 5 T alk set Po rt Thi s po r t allo ws y ou to c on nec t Ag ilen t’s FrameScop e t alkset ( N 2605A-13 7) f or two -w a y v oice communi cati on betw een the Frame S co pe and DualRemote o ver copper cabl in g. DC Power Input ...

  • Agilent Technologies N2610A - page 14

    6 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 The D ualRe mote 35 0 at a Gla n ce The D ualRemote 350 at a Gl ance Figure 4 DualRe m ote Fr ont V iew The Agilent DualRem ote 35 0 is used with the F r ameScope 3 50 when p erf orming c able te sti ng. The DualR emote is posi ti oned at the far end of the cabling r un b ...

  • Agilent Technologies N2610A - page 15

    Intr oduc ing th e Fra meScop e 35 0 1 T h e Ma in Men u at a Gl ance Agil ent F rameScope 35 0 Us er’ s Manual 7 Th e Main M e nu at a Glance Figure 5 The Ma in Me nu T itle Bar Disp la ys the name of the current s cree n. Ta b A r e a Dis pla y the currentl y se le cted tab. The FrameScop e 350 pro vides t wo t abs : Ne t w ork and C able . Sel ...

  • Agilent Technologies N2610A - page 16

    8 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 T h e Ma in Men u at a G l an ce The Ne twork T ab Figure 6 Fram eScop e Ne twork T a b T ab Titl e Di spla ys the name of th e t ab. Netw o r k Re source Are a Sho ws all of the detecte d net work resour ces. Whe n yo u pr ess th e Ne twor k ta b, the F rameS cope perfo ...

  • Agilent Technologies N2610A - page 17

    Intr oduc ing th e Fra meScop e 35 0 1 T h e Ma in Men u at a Gl ance Agil ent F rameScope 35 0 Us er’ s Manual 9 Auto te st But ton Ca lls the N et wor k A uto te st Se tup sc ree n. The C able T a b Figure 7 FrameS cope Cabl e T ab (norm a l mode ) T ab Titl e Di spla ys the name of th e t ab. Cer tif icat ion T e st B utton s Launch a certific ...

  • Agilent Technologies N2610A - page 18

    10 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 Getti ng Star te d Getti ng Sta rted Switching th e FrameScope On and Off 1 T o switch the FrameScope on , bri ef ly pr ess t h e Powe r button on the fr ont panel . The sc reen wil l lig ht an d a brie f tone wil l sound. 2 Whil e the unit i s on, brie f ly pre ssing th ...

  • Agilent Technologies N2610A - page 19

    Intr oduc ing th e Fra meScop e 35 0 1 Ge tting Sta rte d Agil ent F rameScope 35 0 Us er’ s Manual 1 1 Checking Power and Cha rging th e Battery The FrameScop e’s battery should pr o vide enou gh po w er for a typica l day of testing. Th e A C po wer ada pt er/ charger can also be used to po wer the un it and to recharge the batter y . T o che ...

  • Agilent Technologies N2610A - page 20

    12 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 Getti ng Star te d Connectin g to the Net work The FrameScop e 350 uses test pro bes to connect to the ne tw ork y ou are testing . F ollo w thes e steps to conn ect y our unit to the netw ork: 1 Select an appr opriate A g il ent test pr obe fo r y our appli cation: • ...

  • Agilent Technologies N2610A - page 21

    Intr oduc ing th e Fra meScop e 35 0 1 Ge tting Sta rte d Agil ent F rameScope 35 0 Us er’ s Manual 1 3 Us ing t he Fra meS cop e 3 50 Y ou operate the F ram eScope using i t s fr ont panel touch screen and cont rol but tons. When testi ng with the unit, use the f o llo w ing op erating tip s: • Sel ect i tems on the di sp la y by pres sin g th ...

  • Agilent Technologies N2610A - page 22

    14 Agile nt FrameScope 350 User’s M anua l 1 Introdu cing the FrameScope 350 Getti ng Star te d See “View ing D et ails and Stati stics ” o n p a g e 2 6 fo r i n fo r m a t io n on re vie wing net work test resu lts. See “View ing Resu lt De t ails ” on page 82 f or inf ormation on re vie w i ng cable t e st result s. ...

  • Agilent Technologies N2610A - page 23

    15 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 2 Network T esting wi th the Fra meS cope 3 50 Netw ork T esting Overview 16 Ex ami ning th e Netw ork 17 Netw ork Overv iew 17 De taile d L i s t 18 Running an Au t ot est 19 Cha n gi ng t he A uto te st M etric s 23 Using the St at ...

  • Agilent Technologies N2610A - page 24

    16 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Netw ork T esting O verv iew Network T esting Overvie w The f ollo wing steps descr i be the g eneral pr oced ure fo r perfo r ming netw ork anal ysis testing u sing the F rameSc ope 350. 1 Po we r t h e un i t o n . S e e “Switch ing the FrameScope On an ...

  • Agilent Technologies N2610A - page 25

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Examining the Network Agil ent F rameScope 35 0 Us er’ s Manual 1 7 Exam ini ng the N e twork Network O vervi ew • Pre ss t h e Netw ork t ab on the Ma in Me nu to be gi n the FrameScop e auto disc ov er y on y our netwo rk. The N e tw ork res our ces area of the di spla y will sho w a lis t of d ...

  • Agilent Technologies N2610A - page 26

    18 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Examin ing the Netwo r k Detailed List 1 T o v ie w a de taile d li st of netwo rk reso urces, press o n an y category in the N etw o rk Resour ces area. A t riangl e indi cates that a list is avai lable for that category. 2 Use th e Scr oll but t on to s e ...

  • Agilent Technologies N2610A - page 27

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Runni ng an Autot est Agil ent F rameScope 35 0 Us er’ s Manual 1 9 Running an Autote st This se ction descri be s ho w t o run an Aut ot es t on the netw ork usi n g the FrameSco pe 350. Th e FrameScope can store A ut ot est su ites that defi ne whi ch netw ork element s to test . 1 From t h e Net ...

  • Agilent Technologies N2610A - page 28

    20 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Runn ing an A utotest 2 If y ou wan t to sa ve this Au totes t s ui te, o r l oa d a pr evi ously-store d suite , pres s the Suite butt on. 3 Sel ect a stor ed suite fr om the list o r sel ect Cre ate N ew , t he n pr ess the Ne x t but ton. Y ou can selec ...

  • Agilent Technologies N2610A - page 29

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Runni ng an Autot est Agil ent F rameScope 35 0 Us er’ s Manual 2 1 5 On the Ne tw ork A uto tes t Set up win do w , p re ss th e Iter ations but ton to sele ct ho w man y times the test is to be run. 6 En ter the nu mbe r o f t i mes y o u wa nt th e tes t to run i n th e numb er e n tr y b o x. 7 ...

  • Agilent Technologies N2610A - page 30

    22 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Runn ing an A utotest 11 When y ou ha v e finis hed sett ing up the test , press the St a r t Te st butt on (or press OK ) on th e Ne t w or k A utote st Se tup scr een . Th e te st wi ll b egin . 12 T o stop the test at an y time pres s the Stop T est bu t ...

  • Agilent Technologies N2610A - page 31

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Cha ngi ng the Autote st Me trics Agil ent F rameScope 35 0 Us er’ s Manual 2 3 Changing th e Autotest Metrics The FrameScop e 3 50 pr o v ides a meas ure of servi ce spe ed and efficien cy b y emul ating a c lient de vice in the netw ork. By making a req ue st f or servi ce to a ke y devi ce, and ...

  • Agilent Technologies N2610A - page 32

    24 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Us ing t he Sta tions List Using th e Stati ons List When a netwo rk r eso urc e on t h e Netwo rk tab is sho wn with a bl ack tria ngle, yo u c an pre ss t h e reso ur ce t o displ ay the Ne t w ork Database scre en, which include s t he Statio ns List. 1 ...

  • Agilent Technologies N2610A - page 33

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Usi ng t he Stati ons List Agil ent F rameScope 35 0 Us er’ s Manual 2 5 4 Y ou can use the Set tings button to reor de r the St a t i on Li st and select what in formati on is di spla yed . 5 Y ou can use the Data base T o ol s but ton to upda te , erase, load or sa v e the Station s List or dele ...

  • Agilent Technologies N2610A - page 34

    26 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Us ing t he Sta tions List V i ewing De tails and St a tistic s 1 Select a station on the Station List an d then press the View butt on. 2 Pre ss t h e Statisti cs butt on t o v iew s tati stics abo ut t he st a tion . ...

  • Agilent Technologies N2610A - page 35

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Usi ng t he Stati ons List Agil ent F rameScope 35 0 Us er’ s Manual 2 7 3 On the Statio n Detail scre en, pres s T ools to see a list of test tools t ha t c an be used on t h e s elected s t at ion . These t ool s ar e describe in more detai l in t he follo w ing sections . NOTE Th e t ool s t h a ...

  • Agilent Technologies N2610A - page 36

    28 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing a Ping Test Perform i n g a Pin g T est The Ping t est allo ws y ou to check if comm un i c at i o ns ca n be establis hed with a part i cular remote node . Th e Fram e S c ope “p ings ” a r emote node b y se ndi ng it a request messag e. If ...

  • Agilent Technologies N2610A - page 37

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Performing a Ping Test Agil ent F rameScope 35 0 Us er’ s Manual 2 9 2 Pre ss t h e Pin g butto n to call th e Ping screen. 3 En ter th e de vic e y ou w an t to p in g in th e Tar g et bo x. Y ou c an en ter th e de vice nam e o r a dd r es s. 4 Sel ect the ping opti ons y ou want, selec t i ng IP ...

  • Agilent Technologies N2610A - page 38

    30 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing a Ping Test 7 Obse rve the resul ts of the Ping tes t. The sc reen wil l sho w the fram e length y ou select ed, t h e number of request s (ping s) se n t and the number of r e pl ies rec ei ved. D at a on the re spo nse time s ar e also di splay ...

  • Agilent Technologies N2610A - page 39

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Performing a Trace Route Agil ent F rameScope 35 0 Us er’ s Manual 3 1 Perform ing a T race Route The T race Route t est allo ws y ou to d et e r min e the pa t h t hr ough the net work to a par ti cul ar devi ce. The FrameScope se n d s dat a pac k ets o ve r the netw o rk and returns t h e router ...

  • Agilent Technologies N2610A - page 40

    32 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing a Trace Route 2 Pre ss t h e Tr ac eR ou te b ut to n to cal l the Tr aceR oute scr een . 3 Enter the de vice to which you want t o trace i n the Targ et box. Y ou ca n e nte r t he devi ce nam e o r ad dr ess. 4 Sel ect the maxim um numbe r of h ...

  • Agilent Technologies N2610A - page 41

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Performing a Trace Route Agil ent F rameScope 35 0 Us er’ s Manual 3 3 6 Obse rve the r esults of the T raceR oute t est. The screen wil l sho w the number an d addre ss o f each h op. In addi tion the dela y (in sec onds) to each hop is sho wn. The del a y i s cumu lat ive, b ut si nc e each t er ...

  • Agilent Technologies N2610A - page 42

    34 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing S NMP Queries Performing SNM P Q ueries The sim ple netw ork manage ment protocol (S NMP) query tool allo ws you t o send a quer y to the m anagement info r matio n dat ab ase (MI B) and re tri eve t he av ai labl e i nf or m ati on fo r t ha t h ...

  • Agilent Technologies N2610A - page 43

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Performing SNMP Queries Agil ent F rameScope 35 0 Us er’ s Manual 3 5 2 Pre ss t h e SNMP Queries but ton to call th e SNM P Quer y scr een . 3 En ter th e de vic e to w hi ch y ou wa nt to qu ery in the T ar ge t box. Y ou ca n e nte r t he devi ce nam e o r ad dr ess. 4 The SNMP Sett ings button ...

  • Agilent Technologies N2610A - page 44

    36 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing S NMP Queries 6 Obse rve the r etur n e d in f or ma t i on on t h e SNMP Qu eries resul ts screen . The sc reen will sh ow the des cription , ID, and other inf orm at ion as ret urned by the remote host. 7 T o run th e test agai n pr ess the St ...

  • Agilent Technologies N2610A - page 45

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Viewing St at istics Agil ent F rameScope 35 0 Us er’ s Manual 3 7 Viewing S tatistic s Y ou can use the F ram eScope to view a va riet y netw ork par ameters, and se e per f ormance statist ics f or them. The foll ow ing p rocedur e descr ibe s ho w to u se the F ram eScope’ s Statist ics tool. ...

  • Agilent Technologies N2610A - page 46

    38 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Vie wing Sta ti stic s 2 Pre ss t h e Statisti cs butt on t o ca ll t he Sta tistic s s creen . The sc reen sho ws ne tw ork utiliz ation and other traffic data such as f ram e coun ters, and pr ot o col counters. 3 T o vie w add itional details, press any ...

  • Agilent Technologies N2610A - page 47

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Viewing St at istics Agil ent F rameScope 35 0 Us er’ s Manual 3 9 4 F or exam ple, pr ess Ut ilization on the Statistics s creen to view the t op ta lk e rs (most ac tiv e devices ) o n the network. 5 Use the other button s on the Stati sti cs scr een to switc h betw een count s and per centages, ...

  • Agilent Technologies N2610A - page 48

    40 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Generating Network T ra ffic Gen era t ing Network T raffi c Y ou can use t h e F rameS cope’s T r af fic Generato r to create netw ork traffic to stress the netw ork and observ e how is reacts unde r diff erent loads . The f ollo w i ng pr ocedure descr ...

  • Agilent Technologies N2610A - page 49

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Generating Network Traffic Agil ent F rameScope 35 0 Us er’ s Manual 4 1 3 On the Parameters tab, confi gure the traffic c h arac t eri stics as y ou desir e. Pres s each parameter ( Fr a me L en gt h , Fram e Rat e , a nd so o n) an d en ter t he va lue yo u wa nt in t h e on-s cree n k eyp ad. Se ...

  • Agilent Technologies N2610A - page 50

    42 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Generating Network T ra ffic 6 Pre ss the bo x buttons to enter the Fra me T ype, MA C sourc e, and MA C Des t i nati on. See “Traffic Generatio n” o n page 20 6. Not e that if you select an IP typ e frame, y ou will get addi tio n al selec tions f or I ...

  • Agilent Technologies N2610A - page 51

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Performing a MAC Loopback Agil ent F rameScope 35 0 Us er’ s Manual 4 3 Perform ing a M AC Loopback Y ou can per f orm a ping-lik e t est on the medi a access contr ol (MA C) lay er (Laye r 2). Using two Fram eScope s , y ou can get resul ts on t h e round-t rip perf ormance. 1 Conne ct t wo FrameS ...

  • Agilent Technologies N2610A - page 52

    44 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Performing a MAC Loopback 4 Pre ss Start or press the OK bu tton to be g in th e tes t . The FrameScop e w ill sear ch ou t the o t her Fram eS co pe on the net work and then report back the link res ults . 5 Re view the transm i s sion inf ormat i o n on t ...

  • Agilent Technologies N2610A - page 53

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Locating a H u b Port with B l i nk Port Agil ent F rameScope 35 0 Us er’ s Manual 4 5 Loca ting a H ub Po rt with Blin k Port Y ou can use t h e F rameS cope to locate a netw ork connecti on’s port on a h u b or switch . The FrameScope will toggle the port ’s link indica tor on and off causin ...

  • Agilent Technologies N2610A - page 54

    46 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Locati ng a Hub Port with Blink P ort 4 T o begin bli nki ng the port, press the Start butt on. 5 Obse rve the h ub o r switch and note whi ch por t’ s li nk indi cator is bli nking. T hat will be the por t fo r the tested cir cuit. 6 T o s top the bl ink ...

  • Agilent Technologies N2610A - page 55

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Viewing the Error L og Agil ent F rameScope 35 0 Us er’ s Manual 4 7 V iewing the Error Log This se ction describe s ho w to vi e w the FrameScope’ s err or log. The err or log tracks and displ ays an y netw ork problems that detec t ed b y t he FrameS cope 3 50. 1 From the main Net work tab, pre ...

  • Agilent Technologies N2610A - page 56

    48 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Viewing the Error Log 2 Pre ss t h e Erro r Log button to cal l the Er r or Log screen . 3 Obse rve the errors l iste d in the log. 4 Pre ss t h e Sho w All bu t ton to ex pan d t he er ror list an d v iew all err ors t h at we re previo usly ackn o wledged ...

  • Agilent Technologies N2610A - page 57

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Usi ng th e Test Databas e Agil ent F rameScope 35 0 Us er’ s Manual 4 9 Using th e T est Databas e The FrameScop e 350 al lo ws y o u to store (y ou must ha v e a Co m pact Flash™ ca r d ins t a l led) Au totest res ults f or later r evie w and do wnlo ading ( see “R u nning an Autot est” on ...

  • Agilent Technologies N2610A - page 58

    50 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Using the Network Data base Using th e Network Data bas e The FrameScope 3 50 allo ws y o u to store (onl y on a Com pactFlash™) netw ork t op o lo g ie s for later rev iew and do wnl oadin g ( se e “Usi ng t h e Sta ti ons L ist ” on page 24). Y ou c ...

  • Agilent Technologies N2610A - page 59

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Using the N etwork D atabase Agil ent F rameScope 35 0 Us er’ s Manual 5 1 6 T o access the Databas e T ools menu pres s t he Dat aba se T o ols butt on. 7 To save th e c ur ren t ne twork dat a, o r t o l oa d prev io usly s tor e d ne tw ork data , pr ess the Load/Sa v e Station List butt on. 8 U ...

  • Agilent Technologies N2610A - page 60

    52 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Loca ting Switch Po r t s Loca ting Swit ch Port s The FrameScope 3 50 allo ws y o u to i d entify the swi tch po r ts bein g acces sed by the FrameSco pe or any ad dress on the netw ork. This se ction describe s ho w to creat e a list of switch ports b ein ...

  • Agilent Technologies N2610A - page 61

    Ne twork Test ing with t he Fra meS c ope 35 0 2 Locating S w itch Ports Agil ent F rameScope 35 0 Us er’ s Manual 5 3 4 The SNMP Setting s bu tton a llo w s you to add S NMP co mmun itie s and p orts to the d e fau lt “p ub l ic” c ommun ity and de faul t port 161 or to change those se t up f or auto di scover y. 5 Pre ss Start t o se e t he ...

  • Agilent Technologies N2610A - page 62

    54 Agile nt FrameScope 350 User’s M anua l 2 Ne twork T esti ng w ith the Fram eSco pe 350 Loca ting Switch Po r t s ...

  • Agilent Technologies N2610A - page 63

    55 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 3 Ca ble T e sti ng with the FrameSc ope 35 0 Cabl e T esti ng Ove rv iew 57 Cabl e T esting B a c kground 57 Cabl e T esting P rocedure 59 Cali bra ting t he T est er 61 Se tting Up an Auto te st 62 Open ing the Set up Menu 62 Choos ...

  • Agilent Technologies N2610A - page 64

    56 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 The cabl e t es t f eature s of the FrameScope 350 a l l ow y ou to easi l y certify new netw ork in stallati ons f or compli ance with indus t ry cabl e standar ds. NOTE This ch apter de scribes the stan d ard Fram e Scop e 350 cab le test featu res. For in ...

  • Agilent Technologies N2610A - page 65

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Cabl e Testing O verv iew Agil ent F rameScope 35 0 Us er’ s Manual 5 7 Cabl e T esti ng Over view Cab le T e sting Bac kgrou nd Indus t ry standar ds f or str uc tured twist ed-pair ca blin g requi re that both e nds of ea ch cabl ing r un be t ested t o find th e w ors t-case pe rfor mance c ond i ...

  • Agilent Technologies N2610A - page 66

    58 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Cabl e Testing O verv iew • The ch annel con figurat ion pr ov ides a full end-to -end per f orm ance cer tif ication, in cluding t he cab le r un as well as the use r’s patch c ords at e ach end. T he pass/ fa il li mit s f o r channe l performance test ...

  • Agilent Technologies N2610A - page 67

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Cabl e Testing O verv iew Agil ent F rameScope 35 0 Us er’ s Manual 5 9 Figure 9 Link T est Co nfig ur atio n Figure 1 0 Cha nne l T es t Conf igur ation Cable T esting Procedure The f ollo wing steps descr i be the g eneral pr oced ure fo r per f orm ing ca b l e cert ificatio n testing using t he ...

  • Agilent Technologies N2610A - page 68

    60 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Cabl e Testing O verv iew 3 Switch on the FrameScope an d DualRemote teste rs and co nnec t th em to the c ab li ng to be te ste d. Se e “C on n ect i ng to the N etw o rk” on p age 12. 4 Pre ss t h e Cab l e tab on the FrameS cope’s Main Men u screen ...

  • Agilent Technologies N2610A - page 69

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Calibrating the Tester Agil ent F rameScope 35 0 Us er’ s Manual 6 1 Calib rating t he T est er Bef ore you begi n a te s t, th e FrameS cope and DualRemote pai r must be calibrated. Calibration allo ws t he FrameScope t o co mp ensate f or slig ht ano malie s in its measu rement har dwa re or that ...

  • Agilent Technologies N2610A - page 70

    62 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t Settin g Up an Autotest The teste r must be configure d for t e sting at each si te by co mp leti ng the f oll o win g pr oce dur es. Open ing th e Setu p Men u 1 On the M ain M enu, press Setup . The Autotest Setup screen dis plays ...

  • Agilent Technologies N2610A - page 71

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 6 3 1 On the A utotest Setup screen, press St and ar d, then Edit . The Standard Setup screen displays. 2 Select the desired stand a r d, then pres s OK . The A utotes t Setup scr een wil l then show the selected stan dard . The s el ...

  • Agilent Technologies N2610A - page 72

    64 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t 2 Sel ect Cre ate a New Sit e Name , th en press Nex t . (Th e OK button change s to a Nex t bu tt o n when you select Create a Ne w Site Na me .) T he screen chan ges, to allow nami ng the site. 3 Press the ico n under The o nscree ...

  • Agilent Technologies N2610A - page 73

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 6 5 1 On the Si te Setup screen, press the preferred label i ng format, then press Next . Simple Label Form at When y ou choos e the Si m pl e la bel in g f ormat, t h e f o ll o wi n g scr een d ispl ays: T o co n fig ure the simple ...

  • Agilent Technologies N2610A - page 74

    66 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t 2 To set the beginning nu m ber to oth e r tha n 1, press t h e Ent er St art Value field. The onscreen key board o pens. 3 Press the backspace arrow to eras e t h e number in t h e dis play , th en press the number keys to enter th ...

  • Agilent Technologies N2610A - page 75

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 6 7 TIA -606- A Label For mat When y ou choo se the T IA- 606-A l abeling f ormat an d pre ss Next , the f ol lo wing scre en displ a ys: Ther e are th r ee fo r mat ti ng opti ons wi thi n the TI A- 606- A standard: • Clas s 1 and ...

  • Agilent Technologies N2610A - page 76

    68 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t Auto-Increment settings for the f ield hi ghl i ghte d , and the start and end values for th e field highlig h t ed. 2 If you want the numbers for any fiel d to incr ease au tomatical ly w i th each new l abel and t est, h i ghlight ...

  • Agilent Technologies N2610A - page 77

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 6 9 5 To s et the number of i nstance s of a cat egory (for e x a m p le, the number o f floors), pr ess the En t er End Value f iel d. Th e on scr ee n keyboard o pens. 6 Press the backspace arrow to eras e t h e va lue in the dis p ...

  • Agilent Technologies N2610A - page 78

    70 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t Checkma rk s i ndicate fi elds th at appear i n the labe ls . Y ello w tags ne xt to the ca teg or ie s i ndi ca te th at aut omat ic nu mber incre menting i s enab led f or that field. T o configure the hierar chical label i n g f ...

  • Agilent Technologies N2610A - page 79

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 7 1 4 Press the backspace arrow to eras e t h e number in t h e dis play , th en pres s the number or le tter keys to enter the new starti ng value. Press OK . T he k e ybo a r d clo ses, and the new star ting val ue appears in the E ...

  • Agilent Technologies N2610A - page 80

    72 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t 1 On the A utotest Se tup screen, press the cable spool icon, then press Edit . The Cable Setup scr een di s pla ys. 2 Select the c able m anufacturer, a n d press Next . Th e Ca ble Da tabas e scr een di s p lays. 3 Sel ect a cable ...

  • Agilent Technologies N2610A - page 81

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 7 3 4 Enter t h e pair coun t, cable c onstruction , and imp edance (de fault sel ections are a vai lable) and pr ess Ne xt . 5 En ter the no mi nal v el oci t y o f pr op ag ati on (N VP) f or ea ch pair , if kno wn, or select Calc ...

  • Agilent Technologies N2610A - page 82

    74 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t Choosing the Connector T ype Co nnectors f r om diff erent manuf act urer s ha v e diff erent transmi s sion charac te ri stic s. The FrameS cope 350 com pensates f or th os e diffe rences, if y ou t e ll it wha t connect ors are us ...

  • Agilent Technologies N2610A - page 83

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 7 5 4 Sel ect whether t he conn ector i s shiel de d o r not and press Ne xt . 5 Selec t t he perfor mance g r a de of the connec tor if kno w n an d pr ess OK . The A utote s t Setup screen displays, with the new connector ty pe nex ...

  • Agilent Technologies N2610A - page 84

    76 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Settin g Up an Autote s t Entering th e Operator Name s The names o f th e te chnicians perfor ming t he te s ts c a n be entered , and w ill appear on the test report. T o e nter the t est t ech nicians ’ na mes: 1 On the M ain M enu, press System . The S ...

  • Agilent Technologies N2610A - page 85

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Setti ng Up an Autotes t Agil ent F rameScope 35 0 Us er’ s Manual 7 7 entered nam es will appear w i th the keyboard a nd keypad buttons avail able. 5 Pick a name from the list or press the keyboard keys to enter the name of the technici an us ing the Frame Scope, then pres s OK . The keyboar d clo ...

  • Agilent Technologies N2610A - page 86

    78 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Runn ing an A utotest Running an Autote st T o r u n an autotest: 1 If this is the first test of the day or after a long break, calibrate the tester. See “Cali brating the T este r” on page 6 1. 2 Connect the FrameScope 3 50 and Dual Rem ote 350 to the e ...

  • Agilent Technologies N2610A - page 87

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Savi ng Test Resu lts Agil ent F rameScope 35 0 Us er’ s Manual 7 9 Saving T es t R esults Before saving test r e sults, choose the st orage site to s ave them t o . Choosing the Data Storage Location Test data can b e s aved to either the FrameSc ope’s int ernal memory or to an ins tall ed Compac ...

  • Agilent Technologies N2610A - page 88

    80 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Sav ing Test Res ults 2 On the System Settings screen, pr ess Sav e T o , then press Edit . Th e Stor age Setup scr een displ ays. 3 Sel ect either In ternal Fla sh or CFl ash Ca rd . 4 If you chose In t er nal Flash , pr ess OK . The System Settings screen ...

  • Agilent Technologies N2610A - page 89

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Savi ng Test Resu lts Agil ent F rameScope 35 0 Us er’ s Manual 8 1 Savin g the R e sults To s ave the tes t results for i nclusion i n cert ificatio n reports : 1 After completi ng a test, press the Save button. The Save Res ults scr een di s p lays. 2 If the cable ID in the displa y is wrong, pres ...

  • Agilent Technologies N2610A - page 90

    82 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Viewi ng R es ult Details Viewing Re sult Deta ils A De tail s button on P ass and Fail s creens opens the Test Data screen. The T est Dat a scr een lists the test pa r am eters and indicates passin g or failure for each. To vi ew detai led test da ta for on ...

  • Agilent Technologies N2610A - page 91

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 View ing Re sult Detail s Agil ent F rameScope 35 0 Us er’ s Manual 8 3 3 To vi ew the Pl ots screen for the sele cted test parame ter (if the P lots button is pre sent), press Plot s . The Pl ot s sc re en di s pla y s. 4 To view the Locator screen for the selected test parameter (if the Locator b ...

  • Agilent Technologies N2610A - page 92

    84 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Viewi ng R es ult Details Data S creens The Data screen shows detail of the selected tes t parameter re sults. The examp les abo ve show d at a of a passin g test, at lef t, and a failing one, at right. T he data included depends on which p a r ameter is s e ...

  • Agilent Technologies N2610A - page 93

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 View ing Re sult Detail s Agil ent F rameScope 35 0 Us er’ s Manual 8 5 boundary on passing test pl ots . On f a il ing tes t plots, the Wors t Ma rg in button p laces the l ine at t he frequ enc y wher e t he res ults exce ed the acceptable limits the mos t. You can move the cursor around the plot ...

  • Agilent Technologies N2610A - page 94

    86 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Viewi ng R es ult Details the loca tion us ing the scro ll button to find the exact distan ce to that peak. By d ef ault, the distan ce shown is how far away the worst test resu lt is from the clos er of the FrameScope or DualRemote. To see the locator resul ...

  • Agilent Technologies N2610A - page 95

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Using T alks ets Agil ent F rameScope 35 0 Us er’ s Manual 8 7 Using T a lksets The 2- Way Talks et Kit (N26 05A - 137) allows operators at opposite ends of a copper cable run to coordinate their eff o rts. To us e talksets for communicati ng between the ends of a cable run : 1 Insert a talkset’s ...

  • Agilent Technologies N2610A - page 96

    88 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Using CompactFla sh™ Car ds Us in g Comp act F la sh ™ Card s The FrameScop e 350 can use Compact Flash™ cards for stori n g lar ge amounts of test data, for transferri ng data to a PC, and for installing new sof tw ar e. Installing CompactFlash™ C a ...

  • Agilent Technologies N2610A - page 97

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 Using Compa ctFlas h™ Cards Agil ent F rameScope 35 0 Us er’ s Manual 8 9 3 A screen describi ng the configuration procedur e displays. The configuration executes in st eps. 4 When the progr ess bar s hows 100%, pr ess OK . The FrameSco pe 350 wil l automaticall y change the S ave to: setti ng on ...

  • Agilent Technologies N2610A - page 98

    90 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Pr intin g Labe ls Print ing Labe ls Printing La b els On Sit e The FrameScop e 350 can pri nt labels directl y to a Br ady TLS2200 la b e l printer. The labeling paramete rs are s et using the proce dure “ Cho os ing the Labeling Format” on pag e 64. Wh ...

  • Agilent Technologies N2610A - page 99

    Cabl e Test i ng with th e Fram e Scop e 35 0 3 P r in t i ng Lab e ls Agil ent F rameScope 35 0 Us er’ s Manual 9 1 3 Pres s Autopr int to enab le the Autop rint funct ion. A checkmark shows that the function is enabl ed. P res s OK 4 Connect the N2605A -050 interface cab le to the serial ports of the FrameSco pe 350 and Brady TLS2 200. 5 Turn t ...

  • Agilent Technologies N2610A - page 100

    92 Agile nt FrameScope 350 User’s M anua l 3 Cabl e Tes ting wi th th e Fram eSc ope 35 0 Pr intin g Labe ls ...

  • Agilent Technologies N2610A - page 101

    93 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 4 Fib er T e stin g Fi ber T esti ng Ov erv iew 94 Cali bra ting t he T est er 96 Cali bra ting f or Do uble -En ded T e sting 96 Cali bra ting f or Sin gle-E nded T est ing 99 Se tting Up an Auto te st 101 Open ing the Set tings Men ...

  • Agilent Technologies N2610A - page 102

    94 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Fibe r Testi ng Ove r view Fib er T est ing Ove rvie w This ch apte r d escribe s ho w to cer t ify op tica l fibe r cabli ng. Th e pr ocedure s in th e chapter are su f fi cient for mos t fiber certificati on jobs. If the re quir ement s of the job are not addres sed h ere, r ef er t ...

  • Agilent Technologies N2610A - page 103

    Fi be r Test ing 4 Fibe r Testi ng Ove rview Agil ent FrameSc ope 35 0 User ’s Manua l 95 Double-E nd ed, Fib er Pair Double -ende d fiber pai r configurat ion t ests two fibers , usi ng tw o Fi ber SmartProb es. Whe n mul timode pr obes ar e used, the FrameScop e and DualRemote can be as much as 4 km apart. When s inglemode probes are us ed, the ...

  • Agilent Technologies N2610A - page 104

    96 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Calibrating the Tester Calib rating t he T est er Bef ore you begi n a te s t, th e FrameS cope and DualRemote pai r must be calibrated. Calibration allo ws t he FrameScope t o co mp ensate f or slig ht ano malie s in its measu rement har dwa re or that of the com p anion DualRe mote ...

  • Agilent Technologies N2610A - page 105

    Fi be r Test ing 4 Calibrating the Tester Agil ent FrameSc ope 35 0 User ’s Manua l 97 5 On t he Fiber Main Me nu, pr es s Calibratio n . The Fiber Cal ibrati o n scr een di s p lays. 6 Choose Do uble Ended , and press Ne xt . The Fi be r Detection screen displays. 7 When the message below t he di agram reads, “Re ady to Cal ibrate,” press OK ...

  • Agilent Technologies N2610A - page 106

    98 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Calibrating the Tester 1 Insert a Fibe r S martProbe + in the FrameScope, and a Fi b e r SmartProbe + in the Dual Re mote. T hey shoul d both be multi mode. 2 Connect a single fiber of e a ch of two duplex test jumpers to the two Fiber SmartProb es with the transmitter of each connect ...

  • Agilent Technologies N2610A - page 107

    Fi be r Test ing 4 Calibrating the Tester Agil ent FrameSc ope 35 0 User ’s Manua l 99 7 When the message below t he di agram reads, “Re ady to Cal ibrate,” press OK . T he Calibra ti on w indow o pens. 8 When the window reads, “Ca libration Suc c essful,” press OK in the window . T he Fiber Main Menu di s plays. Remov e the r eference ju ...

  • Agilent Technologies N2610A - page 108

    100 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Calibrating the Tester 6 Choose Sing le Ended , a nd pre ss Nex t . The Fiber Detection screen displays. 7 When the message below t he di agram reads, “Re ady to Cal ibrate,” press OK . T he Calibra ti on w indow o pens. 8 When the window reads, “Ca libration Suc c essful,” p ...

  • Agilent Technologies N2610A - page 109

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 101 Settin g Up an Autotest The teste r must be configure d for t e sting at each si te by co mp leti ng the f oll o win g pr oce dur es. Opening the Setting s Menu 1 On the M ain M enu, press Fib er A u tot est . The Fiber Autotest Setup scr een di s p lays. 2 ...

  • Agilent Technologies N2610A - page 110

    102 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t Choosing the T est Configuration T o ch oose e ither s ing l e-ended or dou ble- ended t esti ng : 1 On the Fiber Autotes t Sett ings scr een, press Setup , th en press Edit . The test Configuration Se tup screen di s plays. 2 Press e ither Doubl e Ende d or ...

  • Agilent Technologies N2610A - page 111

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 103 2 Sel ect either Overall Bud get Method or Loss/Length M ethod , then press Ne xt . C ontinue by completing the s teps in the m a tching secti o n that foll o ws . Overall Bud get Method Ov e rall Bu dget Method configu res a fi x ed loss limit va lue for ea ...

  • Agilent Technologies N2610A - page 112

    104 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t 3 Pres s OK . The Fib er Aut otest Set tin gs sc ree n di spla ys. Loss/Length Me thod When Loss /Lengt h Met hod is sele cted, the FrameScope 350 ca l cu l ates the l imi t base d on the l e ngth o f the c able te sted . Y ou can se t value s for con nec to ...

  • Agilent Technologies N2610A - page 113

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 105 3 Pres s OK . The Fib er Aut otest Set tin gs sc ree n di spla ys. Setting the Lengt h Limit T o set the l ength l imit f or fiber t esting: 1 On the Fiber Autotes t Sett ings scr een, press Length Limit , the n press Edit . T he Length Lim it Setup s creen ...

  • Agilent Technologies N2610A - page 114

    106 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t Choosing the Network Lim it The FrameScope 350 can certify cabling f or complia nce with the physical m edium depe ndent (P MD) r equirem ents o f pop u la r netw ork interface technol ogies suc h as Ethernet or AT M . Ne t w ork certific atio n can be p er ...

  • Agilent Technologies N2610A - page 115

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 107 1 On the Fiber Autotes t Sett ings scr een, press Site , then press Edit . The Site Setup s c r e en displays. 2 Sel ect Cre ate a New Sit e Name , th en press Nex t . (Th e OK button change s to a Nex t bu tt o n when you select Create a Ne w Site Na me .) ...

  • Agilent Technologies N2610A - page 116

    108 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t Choosing the Cable T ype Ca ble f ro m d iff erent manufac t u rers h as diff erent tran smis sion charact erist ics . T he FrameSc ope 350 compen sates fo r those diff erence s if y ou t e ll it wha t cab le i s used on the job. T he color of the cabl e spo ...

  • Agilent Technologies N2610A - page 117

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 109 4 Select the f iber c onstructi on that is approp riate and press Next . 5 En ter ei ther the nom i na l v elo ci ty o f pr op ag ati on (NV P) of the fiber cable, OR t h e f iber cabl e’s refr active ind ex ( d efault va lues are pre sented) a nd press Ne ...

  • Agilent Technologies N2610A - page 118

    110 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t 7 Enter the no minal spe cificat ion s of t he fi be r . Def ault values are p resen ted. P r ess OK and the Fibe r Autotest S e ttin gs sc ree n wi ll disp la y with the ne w cable desc ription entered bes ide t he cable spool icon . Setting the Modal Band ...

  • Agilent Technologies N2610A - page 119

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 111 1 On the Fiber Autotest Setti n gs scr een, press the connector icon, then Edit . The Connect or Setup scree n di splays. 2 Pres s Nex t . A l ist of tha t connector ty p es displays. 3 Press the type of the connect or, then press OK . The Fib er Au tot es t ...

  • Agilent Technologies N2610A - page 120

    112 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Settin g Up an Autote s t descr iptions of conne ctor types. I f one of t h e st o red descr iptions mat ches the connector be ing te sted sel e ct it, then p ress OK . 2 If not highlight Add Ne w Descriptio n and press Ne xt . 3 Enter the na me to be added to t he databas e and pres ...

  • Agilent Technologies N2610A - page 121

    Fi be r Test ing 4 Setti ng Up an Autotes t Agil ent FrameSc ope 35 0 User ’s Manua l 113 Entering th e Operator Name s The names o f th e te chnicians perfor ming t he te s ts c a n be entered , and w ill appear on the test report. T o e nter the t est t ech nicians ’ na mes: 1 On the Fiber Autotest S e tup screen, press O perators , then Edit ...

  • Agilent Technologies N2610A - page 122

    114 Agi lent Fra meS cope 35 0 User’s Man ual 4 Fibe r Test ing Runn ing an A utotest Running an Autote st T o r u n an autotest: 1 Connect the FrameScope 3 50 and Dual Rem ote 350 to the ends of the cir cuit needin g certi fication. 2 On the Fr ame Scope Fiber M ain M enu, press Fib er A uto te st . The Fiber Autotest Setup screen displays. 3 Pr ...

  • Agilent Technologies N2610A - page 123

    115 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 5 Ca ble T e sti ng in Ex pert Mode T est ing Overvi ew 117 Chang i n g to Expert Mode 118 The Exp ert Autot e st Setup 119 Choosi ng an Ex istin g Setti n gs Profile 119 Ed itin g an Exi sti ng Se ttin gs Pro fi le t o R em ove a L ...

  • Agilent Technologies N2610A - page 124

    116 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode Expert M o de allo w s y ou a g re at deal of f lexi b il it y and customi z atio n wh en usi ng th e cable test fe atures of the FrameScop e 350. Expe r t M ode al lo ws y ou to cer t ify new netw ork installat ion s for co m p liance with indus tr y cabl e standard ...

  • Agilent Technologies N2610A - page 125

    Ca ble T estin g i n E xpe rt M ode 5 Test ing Overview Agil ent F rameScope 35 0 Us er’ s Manual 117 T estin g Ove rvie w This sect ion pr o vides an o v e rvie w of c able te sting i n Expert Mode. F or addit ion al i nf ormation on c able t e sting, s ee “Cable T esting Back gro un d ” on pa ge 5 7. Expe rt Mo de uses the same tw o-tester ...

  • Agilent Technologies N2610A - page 126

    118 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode Changing to Exper t Mode Ch an gin g to Ex per t M ode T o chan ge t he Fr ameScope f r om standar d con f igura t i on t o Exper t mode: 1 On the M ain m enu, press System . The System Settings screen displays. 2 On the System Settings screen, pr ess User In terface ...

  • Agilent Technologies N2610A - page 127

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 119 The Ex pert Autot est Setup When in the Expert M ode, addit ional Autotest s etup choices are avai la ble . Choosing an Existing Se tt ings Profi le A profi l e is a pre defined lo ck ed set of A utotest se ttin gs, l ock ed to prev en ...

  • Agilent Technologies N2610A - page 128

    120 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup 3 In the P rofile Set up screen, press the desired profile. If the scrol l bar is not full length, use t h e scroll rocker to scrol l down to s ee more stored profiles 4 Pres s OK when done . 5 Pres s Start T est t o ru n the A u totest. ...

  • Agilent Technologies N2610A - page 129

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 121 the Test Pro be set ting is not locked you will go direct ly to t h e Passwo rd Screen, w here you c a n choose to password p rotect your profile. 3 If you choose to p a ssword pr otect your profile, you w i ll be prom pted to enter t ...

  • Agilent Technologies N2610A - page 130

    122 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup 350 use th e existin g settings fo r al l the p a r a m eter s. See the r emainder of this section to conf igure the other sett ings. 2 In Expert Mode, press Autot est . On the A utotes t S e ttings screen, press Edit Setti n g s , then p ...

  • Agilent Technologies N2610A - page 131

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 123 Passwo rd Screen, w here you c a n choose to password p rotect your profile. 5 If you choose to p a ssword pr otect your profile, you w i ll be prom pted to enter t he password. O nce you a r e s atisfied wit h y our password selection ...

  • Agilent Technologies N2610A - page 132

    124 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup 3 Then on the Li mit Setup screen, select the desired cabling system perfo rmance grad e. 4 Then pres s Ne xt . The next Limit Set up screen allow s you to select Link or Chan nel tes t con f iguration. V ie wing Probe Inform a tion The F ...

  • Agilent Technologies N2610A - page 133

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 125 2 On the A utotest Setup screen, press Edit Setti ngs . The Autotest Settings screen shows a menu of parameters and functions. 3 Press the name of the probe, then press View . The Probe Inform ati on screen displ ays, with inf ormation ...

  • Agilent Technologies N2610A - page 134

    126 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup Enterin g th e Site Name Th e sit e nam e id enti fie s th e g roup of s etti ngs u sed on a jo b, an d can be appl ied to t e st re cords f or th at site. To ente r t he si te na me : 1 On the A utotest Setup screen, press Si te , th en ...

  • Agilent Technologies N2610A - page 135

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 127 Choosing the Labeling Form a t The lab elin g for ma t for E xper t Mod e is th e sa me as th at pr ev iousl y d escr ibe d in Ch apter 3 , “ C ab le T estin g with the FrameScop e 350”. Se e “Choos i ng t he Labelin g F ormat ? ...

  • Agilent Technologies N2610A - page 136

    128 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup Choosing the Connector T ype Co nnectors f r om diff erent manuf act urer s ha v e diff erent transmi s sion charac te ri stic s. The FrameS cope 350 com pensates f or th os e diffe rences, if y ou t e ll it wha t connect ors are used on ...

  • Agilent Technologies N2610A - page 137

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 129 1 On the A utotest Se tup screen, press Cable Pairin g , then press Edit . The Cable Pa iring S etup screen displ ays. Pre ss the cab le pair i n g conv enti on used on the job, the n press OK . T he Aut otest Setu p sc reen di spla ys ...

  • Agilent Technologies N2610A - page 138

    130 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup recom mended. Pres s Nex t to vi ew the op tional me as u reme nts you may want to add to your test. Add them by pressing the n a me or box. 3 Af ter you have made you r option al choices, press Ne xt to al low yo u to enable tes t result ...

  • Agilent Technologies N2610A - page 139

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 131 appro priatel y even t h ou gh it is c alled the 3 dB r ule . Wh en you ar e satis fi ed with the choice, press Next . 6 The la s t Measurements S etup sc reen all ow s you to s kip the au tomatic faul t locati on calculati on. T h is ...

  • Agilent Technologies N2610A - page 140

    132 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The E xpert Au totest S e tup Setting the Maxim um Freque ncy The FrameScope 3 50 allo ws y o u to select th e maximu m r ange f or sw ept freque n c y measuremen ts. The ch oices d e pen d som ew hat on t h e st a ndar d se lec ted prev io usly , for examp le f or Ca ...

  • Agilent Technologies N2610A - page 141

    Ca ble T estin g i n E xpe rt M ode 5 The Exp ert Autotes t Setu p Agil ent F rameScope 35 0 Us er’ s Manual 133 2 On the Autotest Setup screen pres s Edit Settings . On th e Au to tes t Settings screen press Save , then Edit to bring up the Save Mode Setup sc reen. Press Su mma r y D ata Only or F ull Data Set . Setting the St orage Locatio n Th ...

  • Agilent Technologies N2610A - page 142

    134 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The Expert Tools Menu The Exp ert T ools Me nu The Expert mode T ools menu incl ude s the f ol lo wing: • Q uic k Ch ec k te sts t h e conti n ui ty and le n g th of a cable r un. See Runn ing a Quick C heck, on page -1 34. • Certif y Netw orks lets you choose sta ...

  • Agilent Technologies N2610A - page 143

    Ca ble T estin g i n E xpe rt M ode 5 Th e Ex p ert T ools Menu Agil ent F rameScope 35 0 Us er’ s Manual 135 1 On the Tools menu (see page -1 34), press Quic k Check . Th e tes t run s, and a Pass or Fail scr een displ ays. V iew ing Details of Quick Check Re s ul ts The FrameScop e ca n displa y detailed inf ormation about both passing a nd fai ...

  • Agilent Technologies N2610A - page 144

    136 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The Expert Tools Menu Certify ing a Network The Expert mode T ools menu incl ude s Ce r t if y Ne tw o rk , which let s y ou test a cable f or conf o rmance to diff erent netw ork standard s. T o certify a netw ork: 1 Connect th e FrameSco pe and DualRe m ote to the c ...

  • Agilent Technologies N2610A - page 145

    Ca ble T estin g i n E xpe rt M ode 5 Th e Ex p ert T ools Menu Agil ent F rameScope 35 0 Us er’ s Manual 137 Y ou can sav e and vie w detai ls of the test resul ts as wi th an y test b y pres sin g De tai ls . See Savi ng Te st R esult s, on page 5 -3, and “ Vie wing R esult Detai ls” on page 5. Blinking the Port T o locate the swit ch or hu ...

  • Agilent Technologies N2610A - page 146

    138 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The Expert Tools Menu 3 To stop the blinking, press Stop . The blinking s tops. Learning the NVP of a Ca b le The FrameScope c an determin e the NV P (Nomi nal V elocit y o f Propaga tion) of a c able, for use in cer tific ation te sting. NV P is ex pressed as a perce ...

  • Agilent Technologies N2610A - page 147

    Ca ble T estin g i n E xpe rt M ode 5 Th e Ex p ert T ools Menu Agil ent F rameScope 35 0 Us er’ s Manual 139 4 Press the Cable Len g th field. The num e r ic k eyboard opens. 5 Press the backspace arrow to eras e a ny va lue in t h e number field , then enter the le ngth of the ca ble sample, in or m eters. Press OK . T he keyboar d close s , a ...

  • Agilent Technologies N2610A - page 148

    140 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode The Expert Tools Menu 2 On the Tools menu, press Measu re Length . T he Me asure Length scr een di s p lays. 3 Pres s Select . The C able Setup sc reen displays. 4 Select the c able m anufacturer, a n d press Next . Th e Ca ble Da tabas e scr een di s p lays. 5 Sel ec ...

  • Agilent Technologies N2610A - page 149

    Ca ble T estin g i n E xpe rt M ode 5 Th e Ex p ert T ools Menu Agil ent F rameScope 35 0 Us er’ s Manual 141 6 Pres s Me asure . The Fram eScope calcu lat es the length of the cable, and displ ays the le ngth of each twisted pair o n the Measure Length scr een. ...

  • Agilent Technologies N2610A - page 150

    142 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode Runn ing COAX and TW IN AX Aut otest s Running COAX a nd TW INAX Autot ests The FrameScop e 3 50 and the DualRemot e 350 su pport both Coaxia l and T w inaxial s ta ndards. This s e ction will ins tru ct you ho w to test to these standar ds. COAX T e st ing Co axi al ...

  • Agilent Technologies N2610A - page 151

    Ca ble T estin g i n E xpe rt M ode 5 Runn ing COAX and TW IN AX Au totest s Agil ent F rameScope 35 0 Us er’ s Manual 143 3 The FrameSco pe 350 is capable o f cert ify ing 10Bas e-2 and 10Base-5 network operation over Coax. By s el ectin g Other in the Networ k Limits of the Autotest Sett ings s creen, or in the Sum mary screen of the Certi fy N ...

  • Agilent Technologies N2610A - page 152

    144 Agile nt FrameScope 350 User’s M anua l 5 Cabl e Tes ting i n Expe rt M ode Runn ing COAX and TW IN AX Aut otest s cabl e is au tomatica lly s elect ed. Press the Edit Settings button to change any se ttings. 2 Pres s the Start T est button from the Autotest Setup s cree n to perform the T winax A utotest Re sult s The Twinax Aut otest ev alu ...

  • Agilent Technologies N2610A - page 153

    145 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 6 Ex pert F i ber T est ing Abou t Fiber E x pe r t Mod e 146 Chang i n g to Expert Mode 147 View ing P rob e In for mati on 148 The Fi b er T ools Menu 150 Using the Loss Meter 150 Measuri ng Length an d Delay 151 Us in g th e Po w ...

  • Agilent Technologies N2610A - page 154

    146 Agi lent Fra meS cope 35 0 User’s Man ual 6 Ex pert Fiber T est i ng About Fiber Expert Mode About Fiber Expert Mode FrameScop e’s Expert Mode includ es man y conf igur ation and test ing optio ns no t incl uded in the standar d te st con figurat ion s . ...

  • Agilent Technologies N2610A - page 155

    Expe rt Fi ber Te sti ng 6 Changi ng t o Ex p ert Mode Agil ent FrameSc ope 35 0 User ’s Manua l 147 Ch an gin g to Ex per t M ode T o change the FrameScope test er fr om standar d config urati on to E xpe rt Mode: 1 On t he Fiber Main me nu, pr es s System . Th e System Settings sc ree n displays. 2 On the System Settings screen, pr ess User In ...

  • Agilent Technologies N2610A - page 156

    148 Agi lent Fra meS cope 35 0 User’s Man ual 6 Ex pert Fiber T est i ng Viewi ng P r o b e Inf or m ati on Vi ew ing Probe Inform ation The FrameScope c an dis pla y d etails a bout the probes installed in the te ste r . To vi e w det ail ed i nfor ma tion o n th e inst a lled prob es : 1 In Expert mode, press Fi ber Autote st on the M ain Menu. ...

  • Agilent Technologies N2610A - page 157

    Expe rt Fi ber Te sti ng 6 Viewing Probe Informa tion Agil ent FrameSc ope 35 0 User ’s Manua l 149 3 Press the name of the probe , then View . The Probe Information screen displ ays, with inf ormation on the probe inst alled in the FrameSco pe. 4 To view informatio n on the probe inst alled in the DualRe mote, pres s the DualR emote tab . T he P ...

  • Agilent Technologies N2610A - page 158

    150 Agi lent Fra meS cope 35 0 User’s Man ual 6 Ex pert Fiber T est i ng The Fiber Tools Menu The F ibe r T ools M en u The Expert mode Fiber T ools menu contain s the f ollo w i ng: • Loss M eter T his tool continuously m easure s and reports the loss on connected fiber cables. • Le ngth & Del ay This tool m e asures the length and propa ...

  • Agilent Technologies N2610A - page 159

    Expe rt Fi ber Te sti ng 6 The Fiber Tools Menu Agil ent FrameSc ope 35 0 User ’s Manua l 151 4 To select t he test configuration or to specify the fiber type, press Quick Setup . Measur ing Length a nd Delay T o us e the Le n gth & D ela y tool: 1 On the Fiber Tools menu, press L eng th & De lay . The Fi ber L e n gth Test scree n di s p ...

  • Agilent Technologies N2610A - page 160

    152 Agi lent Fra meS cope 35 0 User’s Man ual 6 Ex pert Fiber T est i ng The Fiber Tools Menu the one used for testin g. This calibrat i on is just for the Fiber Powe r Meter. After calibr ation the Fiber Power Meter displays. 2 To set the current p ower value as a reference, p res s Set Referen ce . The d if ference i s shown in the Delta field ...

  • Agilent Technologies N2610A - page 161

    Expe rt Fi ber Te sti ng 6 The Fiber Tools Menu Agil ent FrameSc ope 35 0 User ’s Manua l 153 Learning the NVP of a Fiber T o l e arn t h e NVP of a fi be r cable sam ple: 1 Connect a kno wn length sample of the fib e r t o the Fiber Sm artProbe. The s ample m ust be a t l east 50 feet (15 meters) long. 2 On the Fiber Tools menu, press Learn Fibe ...

  • Agilent Technologies N2610A - page 162

    154 Agi lent Fra meS cope 35 0 User’s Man ual 6 Ex pert Fiber T est i ng The Fiber Tools Menu • When m easuring one le ngth of fiber looped back to t h e FrameScop e, enter the entir e leng th of the fib er . 5 Pres s Me asure to learn the NVP of the fiber sampl e . The NVP display s in the NV P (%) field of the Learn Fi ber NVP screen. ...

  • Agilent Technologies N2610A - page 163

    155 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 7 Sys t em Oper ation s The Sta tu s Displa y Are a 156 Th e Sy stem Me nu 157 Syste m Informatio n 158 Storage Setup 159 Ba ttery Sta tus 16 0 T ime and Da t e S et up 16 1 User Int erface Setup 16 2 Ope rato r Setup 163 T ouchsc r ...

  • Agilent Technologies N2610A - page 164

    156 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions The Stat us Disp la y Are a The S t a tus Di splay Are a The status d ispl ay sho ws the current time se t on the FrameScop e 350, tal kset status, bat t ery status, and storag e st at us . Clock Display The cl ock sh o ws the ti me of da y. It can b e set i n th e Time and Da te s ...

  • Agilent Technologies N2610A - page 165

    Syst em Opera ti ons 7 The Syst em Me nu Agil ent F rameScope 35 0 Us er’ s Manual 157 The S ystem Me nu The FrameScop e 3 50 System Menu is di splay ed by pre ssing System in ei ther the Cable or N etw ork Main Men u, whether in Ex per t Mod e or not . T he Cabl e t ab Sys tem Me nu : Ho w ev er , the Sys t em Me n u h as diff eren t entr ies if ...

  • Agilent Technologies N2610A - page 166

    158 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Syst em In format ion Syste m Infor m ation Pre ssing System Inf or mati on th en pres sin g Vie w on either Sys t em S ett ings me n u di s pla y s the FrameScop e serial n u mber , softwa re and h ar dw are rev isi on num b e rs. If t h e DualRe mote has b een at t ac hed and cal ...

  • Agilent Technologies N2610A - page 167

    Syst em Opera ti ons 7 Stora ge Setup Agil ent F rameScope 35 0 Us er’ s Manual 159 St orage Set up The N e tw ork tab requi res a Compa ctFlas h card so there are n o choi ces in the Netw ork System Se ttin gs. The Ca b l e t ab allo ws y ou to sele ct wh ere t h e t es t re sults are store d. Pres s Sa ve to : and then pr ess Edit . Cho ose eit ...

  • Agilent Technologies N2610A - page 168

    160 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Bat ter y S tat us Batte ry Status T o vie w the current bat ter y st at us pre ss Po w er then pres s Vie w . If t h e DualRemote is connected an d cal ibrated , bo th the FrameScop e Batter y St a t u s an d the Dua lRemote Batte r y Status are a v ai lable. The d ispl a y also s ...

  • Agilent Technologies N2610A - page 169

    Syst em Opera ti ons 7 Time and D ate Setu p Agil ent F rameScope 35 0 Us er’ s Manual 161 T ime and Da te Setup T o set the time and date on the FrameScope, pres s Tim e a n d Dat e , then press Edit . Th e Time and Date Setup scre en allo ws y ou to set the Month, Da y , Y ear , and Time as wel l as t h e displa y method f or ea ch. ...

  • Agilent Technologies N2610A - page 170

    162 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Us er Int er f ace Setup User Inte rface Setup The Us er Inter f ace Setup scr een i s were t he fo llo w ing cho i c es are m ade: Len gth Un it s - Feet or M e t ers Ex pe rt M o de - O N/OFF (on l y when acces sed f ro m the Cable tab ) Ena ble Sp eak e r ON/OFF Enable T ouch Cl ...

  • Agilent Technologies N2610A - page 171

    Syst em Opera ti ons 7 Operator Setup Agil ent F rameScope 35 0 Us er’ s Manual 163 Opera tor Setup In t h e Cable t es t mode, yo u can se t the Operators b y pr essing Ope rators then press ing Edit . Y ou can indi cate where the operato r is f or each of the Frame S co pe and D ualRemo te and what t h ei r name is. ...

  • Agilent Technologies N2610A - page 172

    164 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions To uchs creen Cali b r ation T ouc hscr ee n Ca li b ra ti on If it seems that the Fr a m eScope 350 is not responding cor rec tl y to taps on the tou ch scr een, you may need t o c alibrate the to uch s creen to bring it i nto alignm ent with th e under lyin g display. To ca libra ...

  • Agilent Technologies N2610A - page 173

    Syst em Opera ti ons 7 Serial Baud R ate Setu p Agil ent F rameScope 35 0 Us er’ s Manual 165 Seri al Baud R a te Setup Y ou can spec ify w h at serial baud ra te the s erial port of the FrameScop e uses f or uploadi ng tes t recor ds. Press Se rial B aud Rat e: then press Edit . On the Se r ial Baud R at e Setup screen sele ct o ne o f 115.2K , ...

  • Agilent Technologies N2610A - page 174

    166 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Rest ore Defa ul t Se ttings Restore Defa ult Setting s The f ollo w i ng pr ocedure descr ibes ho w to restore t h e FrameScop e 350 to t he configurati on v alue s that w ere se t wh en y our unit was shi pped fr om th e f actor y. 1 Fro m t h e Mai n Menu on eithe r the Cable or ...

  • Agilent Technologies N2610A - page 175

    Syst em Opera ti ons 7 Rest ore De fault Set t ings Agil ent F rameScope 35 0 Us er’ s Manual 167 4 If y ou want to clear the Operat or List , pres s the Clea r Ope rator L ist checkbo x. 5 If y ou wan t to clear cu stom te st l imits, press the D e lete Cust om Limits ch eckbox. 6 Pre ss OK to restore the fact or y-p rogrammed sett ings and clea ...

  • Agilent Technologies N2610A - page 176

    168 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Calibration Information Calibration Info rmation Y ou may dis play t h e calibratio n informat ion by pres sing Cal ibrat ion Inf or mati on and Vi e w . T h e Calibrati on Inf or mat ion scre en d ispl a ys the factor y cali bration date for both the FrameS cope and Dua lRemote as ...

  • Agilent Technologies N2610A - page 177

    Syst em Opera ti ons 7 Printe r Setup Agil ent F rameScope 35 0 Us er’ s Manual 169 Print er S etup The FrameScop e 350 can pri nt labels directl y to a Brady TLS2200 la b e l printer. The labeling paramete rs are s et using the proce dure “ Cho os ing the Labeling Format” on pag e 64. Wh en the F r ameSc ope is confi gured as descr i b ed in ...

  • Agilent Technologies N2610A - page 178

    170 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Network Setti ng s Network Settin gs The N e tw ork Set tings sc reen sho ws a summary o f the netw ork config urati on. T h is scre en m ay als o be ac cess ed b y press ing on the FrameScope i con on t h e right of the Main Menu. This in cludes the f oll ow ing: The N e tw ork Se ...

  • Agilent Technologies N2610A - page 179

    Syst em Opera ti ons 7 N e tw ork Se ttings Agil ent F rameScope 35 0 Us er’ s Manual 171 • De fau lt Gat ewa y – Thi s i s th e de f aul t g ate wa y (r ou ter ) the FrameScop e will use to com municate wi th dev ices on other su b ne ts. Pre ss Ne xt wh en sati sf ied with you r cho ice s. The se cond N e t work Sett ing s Setup screen all ...

  • Agilent Technologies N2610A - page 180

    172 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Network Setti ng s user can manuall y set the FrameScope for 10 or 10 0 Mbps and ful l or ha lf d upl ex m ode . This may b e used for i nst an ce t o prove that a 10/1 00 switch can prop erly su pport the 10 Mbps spe ed. Wh en sa ti sf ied w ith th e set tin gs, pr es s Nex t get ...

  • Agilent Technologies N2610A - page 181

    Syst em Opera ti ons 7 Remote Control Agil ent F rameScope 35 0 Us er’ s Manual 173 Remote Control The FrameScop e c an b e cont r oll ed thr ough its web i n terface. Bef ore this interface can be used, it mus t be enabled thr ough t he Re mot e Con trol S etu p wiz ard. T hi s wizar d als o let s th e user choose t he lev el of secur ity whi ch ...

  • Agilent Technologies N2610A - page 182

    174 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions SNM P S ett ings SNMP Settin gs The FrameScop e 3 50 uses the defa ult communit y “publ ic” and the def ault port 161 f or SNMP access. Y ou may expand the SNM P communiti e s and port number s t o use du ring activ e dis cov e r y , S NMP q uer i e s, and t he Locate S witch T ...

  • Agilent Technologies N2610A - page 183

    Syst em Opera ti ons 7 Demo Mod e Agil ent F rameScope 35 0 Us er’ s Manual 175 Demo M ode The Frame S c ope 350 ma y be put in a De mo mode for trai ning or demonst rati on purpos es. In the Ne t w ork tab, th e Demo mode pr o vides f or a ne tw ork consist ing of s ev eral s t at ions, serv ers, a r outer , tw o swit ch/bri dges, and 5 SNMP age ...

  • Agilent Technologies N2610A - page 184

    176 Agile nt FrameScope 350 User’s M anua l 7 System Opera t ions Dem o Mo d e ...

  • Agilent Technologies N2610A - page 185

    177 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 8 Network Performance A naly ze r Refer e n c e Netw ork Conn ection 179 Netw ork Databa se 181 Station List 18 1 D evice Deta ils 181 Ac t ive Discovery P rocess 182 Netw ork Performa nce Aut ot est 18 4 Autot e s t Se tup 184 Th e ...

  • Agilent Technologies N2610A - page 186

    178 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Netw ork T ools 205 Pin g 205 Tr a c e R o u t e 205 SN MP Que ry 206 Lo ca te Swit ch Po rt 20 6 MA C Loop-ba ck 206 T raffic Ge nerat ion 206 Remot e Con trol 209 Mem ory R equi rem ent s 210 ...

  • Agilent Technologies N2610A - page 187

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Conne c tio n Agil ent F rameScope 35 0 Us er’ s Manual 179 Network Connecti on Bef ore t he Fra m eS cope 350 is attac h ed t o a net work, it i s cons tantly checking for a con necti on. When the FrameSco pe 350 det ects that it has b een plu g ge d into a netwo rk devi ce it do es the f ...

  • Agilent Technologies N2610A - page 188

    180 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Connecti on • T est the Def ault Ga tew ay and the DNS an d WINS serv ers. I f an y of th ese d evi ces is not w or king, an err or is recor ded in the Err or Log. Th e Def aul t Gatew ay is tested b y ARPing fo r it s MA C address. T he DNS and W ...

  • Agilent Technologies N2610A - page 189

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 N e twor k Databas e Agil ent F rameScope 35 0 Us er’ s Manual 181 Netw ork Dat abase The FrameScop e 350 lis t ens to the net wor k traffic and activ e ly inte rrogates netw ork dev ices to learn about at tached hosts, serv ers, sw itche s and rout ers. This inf or ma tion is stor ed in t h e Net ...

  • Agilent Technologies N2610A - page 190

    182 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Da tab as e MA C addr ess Ne t w ork add ress es: IP an d IPX Serv ices pr o vided b y t he de v ice (D HCP , DNS, etc.) Pr ot o cols used by the devi ce ( I P , IPX, etc. ) Whil e the de vice details are d ispl ay ed, t h e foll ow ing stati sti cs ...

  • Agilent Technologies N2610A - page 191

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 N e twor k Databas e Agil ent F rameScope 35 0 Us er’ s Manual 183 • Broadc ast RIP v1 an d v 2 rout ing table requests 5 Ev ery 300 seconds : • Send an ARP fo r e ach IP addre ss in t h e subnet rang e • F or ev ery ARP response re ceiv ed, send an I CMP echo req uest 6 Ev ery 300 seconds : ...

  • Agilent Technologies N2610A - page 192

    184 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest Network Perf ormance Autot est The A utotest i s used to measure con necti vity and re spons e time of im p ort ant net wo rk r esou rc es. Each netw ork resour ce is tested usi ng t ar g e t-speci f i c access method s to comm ...

  • Agilent Technologies N2610A - page 193

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 185 The De fault Au totest Su ite The FrameScop e bo ots up with the <Defa ult> suite sel ected. When t h e <Default > s uite is se lected, the FrameScope automat ical ly creates an A utotest suit e fr om t he serv ...

  • Agilent Technologies N2610A - page 194

    186 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest Adding T e sts The A dd but ton wil l start u p a wizar d whi ch is used to add t e sts to the test sui te. If t h e Netw ork Database contai ns de vices with f eatures not co vere d b y any test in the t e st suite, t ests f o ...

  • Agilent Technologies N2610A - page 195

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 187 Another wa y to add a test to the su ite is to press the Cre ate New radio but t on and press Ne xt . 1 A li st of tes t type s is pres ented on the next scr een. 2 Sel ect the type of test and pre ss N ext. 3 T e s t spec ...

  • Agilent Technologies N2610A - page 196

    188 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest req uested from t he DHCP S erve r . The last se tup scr een pr o vides a lis t of the measure ments performed duri ng this test. An y of the threshold s used to rate the perform ance of eac h of these meas ureme nts ma y be vi ...

  • Agilent Technologies N2610A - page 197

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 189 Serv er Re spon se The tot al time f or negotiatin g f or an IP addres s from the DHCP Serve r DNS Se rver The D NS Ser v er test v erifi es that the serv er can look up a n ame or an IP addres s. Te s t S e t u p The firs ...

  • Agilent Technologies N2610A - page 198

    190 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest modi f ie d by se lecting it f rom t h is list an d sel ecti ng Edit as s ho wn in the DHCP ser ver . The measure ments taken duri ng this test are: PING Re spons e T h e ti m e i t t a ke s t o pe r fo r m a n I CM P E c h o t ...

  • Agilent Technologies N2610A - page 199

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 191 WINS Serv e r (NetB IO S Na m e Se rver) The WINS Serv er t e st v erifies that the serve r can co n v ert a name t o an I P ad dress. Te s t S e t u p The first setup screen is use d t o en ter the IP add res s of the WI ...

  • Agilent Technologies N2610A - page 200

    192 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest NT File S erver NFS Fil e Server The file s erver test s pr o v ide t he fo llo w i ng bas ic operat ion s: • Check server a vaila bilit y b y logging- in to the s erve r or with a partial log-in if a username and pass wor d ...

  • Agilent Technologies N2610A - page 201

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 193 The next setup scree n al lo ws se le cti on of the file actions to be teste d. The l ast setup sc reen pro vides a li st of the measurem ents pe r f o rmed d uri n g th e tes t. An y o f the thre s hol ds u se d to ra te ...

  • Agilent Technologies N2610A - page 202

    194 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest loc atio n o f t he scre en shown. Us e t he S cro ll ro ck er to sc roll thro ugh th e l ist . The t ime resp on s es are modifie d as sho wn in t he DHC P se rver . The measure ments taken duri ng this test are: Name Lookup T ...

  • Agilent Technologies N2610A - page 203

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 195 Exam ples of modi fy ing rate s and time ar e sho wn belo w: We b S e r v er The W eb S e rv er t est verifi es that s erve r is ac cess ible and mea- sures the do wnload t ime of the fi rst g e t operat ion. Te s t S e t ...

  • Agilent Technologies N2610A - page 204

    196 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest measure ments ma y be vie wed and mo dif i e d by s el ecti ng it fr om this li st and select ing Edit. The measure ments taken duri ng this test are: Name Lookup The reque st/res ponse t ime f or conv er ti ng a name into an a ...

  • Agilent Technologies N2610A - page 205

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 197 Rec ei v e R ate The rate in by tes per seco nd f or the do wnload of th e f i rs t da t a in res po nse to the g e t com m and. E-mail Se rv er The E-mai l Serv er test ver ifies that the E-ma i l serv er is acces si- bl ...

  • Agilent Technologies N2610A - page 206

    198 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest perfo r man ce of each of t h ese me asuremen ts ma y be vie we d a nd modi f ie d by se lecting it f rom t h is list an d sel ecti ng Edit . The measure ments taken duri ng this test are: Name Lookup T h e request/r esponse ti ...

  • Agilent Technologies N2610A - page 207

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 199 Novell Serve r Print Se rv er F TP Se rver SNMP Ag ent Primary D omain Controller Backup Dom a in Controlle r Rout er W orkst a tion Thes e t es ts veri fies th at the named de vice is access ible an d measure s th e name ...

  • Agilent Technologies N2610A - page 208

    200 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Performan ce Autotest The measuremen ts t a k en during al l these tests are : Name Lookup T h e request/r esponse time f or conv e rt i ng a name into an ad dress. PING Re spons e T h e ti m e i t t a ke s t o pe r fo r m a n I CM P E c h o t e st ...

  • Agilent Technologies N2610A - page 209

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Network Pe r formance Autotest Agil ent F rameScope 35 0 Us er’ s Manual 201 lookup , a PIN G respo n s e, a f i r st re sponse, and a page read operat ion. The status and ti me f or each of these op erati ons is pr ese nted in the detail ed view . The A utotest may be left run ning i n a loop wi t ...

  • Agilent Technologies N2610A - page 210

    202 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Sta tis tics St atistic s The first view in to statisti cs pr o vid es the o ver all ne tw ork heal t h. The ope rat or can dri ll do wn into t h e st at ist ics to get more an d more detaile d informat ion . Some of the more detail ed inf ormation is gathe ...

  • Agilent Technologies N2610A - page 211

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Sta tist ics Agil ent F rameScope 35 0 Us er’ s Manual 203 Bro adcasts T h e n um b e r of broadcas t frames or the perce n t of the uti lizat ion use d up b y broadcas t f rames. Pres sin g this statis t i c swi t che s to a list of T op Broadc ast Tra n s mitters. Pressi ng an y of the Top Trans ...

  • Agilent Technologies N2610A - page 212

    204 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Sta tis tics Protocol M ix Pre ssin g the proto col g ets y o u to the Top Transm i t ters of that pr otocol . Pressing an y of t h e Top Transmi tter s brings up the Station Detail screen for that st ati on. • IP • IPX • AR P • RARP • Ban yan • ...

  • Agilent Technologies N2610A - page 213

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Netw o rk Tools Agil ent F rameScope 35 0 Us er’ s Manual 205 Network T ools Ping The Pi ng tool is us ed to veri fy acce ss to devic es on a net work. The current , min imum, maxi mum and a ver age resp onse times are d ispla yed along wi th a count for th e number of ti mes th er e wa s no re spo ...

  • Agilent Technologies N2610A - page 214

    206 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Tools Rem o te devi c e I P ad dress T h e remote devi ce ma y be sele cted fr om a l ist o r e ntered as a name o r IP address . If t he devi ce is sp ecified by a name, D NS and WINS ar e used to t ra n s l at e the name into an IP address . Max i ...

  • Agilent Technologies N2610A - page 215

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Netw o rk Tools Agil ent F rameScope 35 0 Us er’ s Manual 207 The ope rator ma y change any o f the f ollo wing pr operties of the traffic being generated: Frame Le ng th The number of byt es in t h e frame, in clud ing the FCS. This number ranges f r om 64-1 518 unl ess l ong or short frames are s ...

  • Agilent Technologies N2610A - page 216

    208 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Network Tools Des tina tion M AC T o sen d a frame t o a station on the local L AN, enter i ts MA C addres s. If th e d esti nat ion addres s is set to FF- FF-FF- FF-FF- FF , t he frame will be re ceiv ed by al l d evi ces on the L A N. To se n d a frame ac ...

  • Agilent Technologies N2610A - page 217

    Netw ork Perfor m a nce Analy zer Refe r en ce 8 Remote Control Agil ent F rameScope 35 0 Us er’ s Manual 209 Remote Control A we b s erver is imp lemented in the FrameScop e 350 to pr o vide a means to contr ol a nd monito r the FrameScope 350 vi a a w eb br o wser . The FrameScop e’s home page pr ovi des li nk s to the f ol- lo wing FrameS co ...

  • Agilent Technologies N2610A - page 218

    210 Agile nt FrameScope 350 User’s M anua l 8 Netw ork Perfor manc e Analy z er Refe rence Memory Requirements Mem o ry Re quireme nts The FrameScop e 350 requir es a Com pactFlas h ™ card to store test resu lts an d network s tati on l i st s . The amount of m em ory th at each Autotest res ul t tak e s up depends on the num ber of te s t an d ...

  • Agilent Technologies N2610A - page 219

    211 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 9 Cabl e T est er Re fere nce Mea surem ents 21 2 Wire map 212 Lengt h 212 Prop a ga tio n De lay and Skew 212 Near E nd Cro sstalk (N EXT) 213 Atte nuatio n 21 3 Return L oss 214 Equal Le v e l F ar End C ro sst alk ( ELFEXT) 214 A ...

  • Agilent Technologies N2610A - page 220

    212 Agile nt FrameScope 350 User’s M anua l 9 Cab l e T ester Refe r e nce Mea su rem ents Meas uremen t s The FrameScope 350 make s th e following test measur ements. See “Setti ng the M e as ur ement s” on page 129 for m or e detai ls. W ir emap Wiremap te s ting che cks for proper c onti nuity and term ination of cable s . The test identif ...

  • Agilent Technologies N2610A - page 221

    Cab le Te st er R eferen ce 9 Mea su rem ents Agil ent F rameScope 35 0 Us er’ s Manual 213 Nea r End C ross talk ( NEXT) NEXT measur es near end coupling betw een pair s in the test ed cable run , at both ends of a cable, o v er 6 pair combin at ions. Attenu a tion Attenuation me asures the de c r e ase i n signal strength ov er the length of al ...

  • Agilent Technologies N2610A - page 222

    214 Agile nt FrameScope 350 User’s M anua l 9 Cab l e T ester Refe r e nce Mea su rem ents Return Loss Retu rn Loss measures the degr adati on of sig nal over all four pairs from each end of the tested cable r un . Equal Level Far End Crosstalk (ELFEXT) ELFEX T measures far en d coup ling betw ee n pairs in the tested cable, for all p air co mbin ...

  • Agilent Technologies N2610A - page 223

    Cab le Te st er R eferen ce 9 Mea su rem ents Agil ent F rameScope 35 0 Us er’ s Manual 215 Power Sum ELFE XT (PSELEXT) Computed for each pair by calculating a power sum tota l of the pair-to-pair ELFEX T from the three other pairs. Power S um A CR (P SACR) The ra ti o of the m easured a tt e nuation a n d the com puted power sum near end crossta ...

  • Agilent Technologies N2610A - page 224

    216 Agile nt FrameScope 350 User’s M anua l 9 Cab l e T ester Refe r e nce Calibration Calib rat ion Meas ur ement Calib ra tion Rem ote Calib r ation Remote cali bration esta blis hes a common zero ref erence f or the FrameSco pe 350 and it s associ ated DualRem o t e 350, befo re any end- to-end meas urements are taken . You m ust perform a rem ...

  • Agilent Technologies N2610A - page 225

    Cab le Te st er R eferen ce 9 Calibration Agil ent F rameScope 35 0 Us er’ s Manual 217 T o r un a s e lf test on the DualR e m ote 350: 1 Insert the Sel f-Test prob e in the SmartProbe por t of the Dua l R emote 350. 2 Pres s the OK key . T he Pa ss /F ai l LE D on t he fr on t pa ne l of th e Dual Remote 350 indicates t he out come of the sel f ...

  • Agilent Technologies N2610A - page 226

    218 Agile nt FrameScope 350 User’s M anua l 9 Cab l e T ester Refe r e nce Memory Requirements Mem o ry Re quireme nts The a m o unt of mem or y that each test resu lt takes u p depe n ds on the option s that you set before starti ng the test. General ly, if yo u save plots with ea ch test, test r esult fil es are larger than i f you om it plots. ...

  • Agilent Technologies N2610A - page 227

    219 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 10 Dual Re mote 350 Re fe re nc e The Dual Remote 350 220 Cont rol B utto ns 220 Indi c a tors 221 This ch apt er d escr ibes the f eature s of the Agilent Du alRemot e 350. ...

  • Agilent Technologies N2610A - page 228

    220 Agi lent Fra meS cope 35 0 User’s Man ual 10 DualRemote 350 Refere nce The D ualRe mote 350 The Du alRemot e 35 0 The Dual Remote 35 0 perfo rms the same tes ts as the FrameS cope 3 50, and is controll ed by the Frame Scope. The DualRemote d isplays information u sing LED i ndicators. Control B uttons The Dual Remote 35 0 has t h e same cont ...

  • Agilent Technologies N2610A - page 229

    DualRemote 350 R eference 10 The Du al Re m ote 3 50 Agil ent FrameSc ope 35 0 User ’s Manua l 221 Ind icat or s Pair S tatus Indi cators The pair status indicators turn gre en or red at t he end of a test t o s how the st atus o f e ach pai r. A r e d indi cator means the asso ciat ed pai r failed the curr ent te st. W arni ng Indi cators The wa ...

  • Agilent Technologies N2610A - page 230

    222 Agi lent Fra meS cope 35 0 User’s Man ual 10 DualRemote 350 Refere nce The D ualRe mote 350 Pass/Fail: The Pass/F ail indicat or turns green when the test pa sses, or red when the test fai l s . Diagnostics The Di agnostics s ection of t h e DualRemote 350 front panel provi des more de tai led inform ation about fai l ing test results. WS and ...

  • Agilent Technologies N2610A - page 231

    223 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 11 Spec ificat ions Physi cal 224 Envi ronm ent al 22 5 Elec trica l 226 Po r t s 227 Dis pla y 22 9 F ib er S m ar t Pro be + 230 ...

  • Agilent Technologies N2610A - page 232

    224 Agi lent Fra meS cope 35 0 User’s Man ual 9 Speci f ica tions Phy sic al Phy sica l The F rameScop e 350 and Dual Remote 35 0 are the s a me size, a nd weigh the same. ...

  • Agilent Technologies N2610A - page 233

    Specifica t i ons 9 Envir o nmental Agil ent FrameSc ope 35 0 User ’s Manua l 225 En vironme ntal ° ° ° ° ° ° ...

  • Agilent Technologies N2610A - page 234

    226 Agi lent Fra meS cope 35 0 User’s Man ual 9 Speci f ica tions Ele ct ric al Elec trical WA RN I N G Use on ly the ac adapter suppli ed in the FrameScope Kit. Us ing other po wer ad apt er s may damage the tes t er , and will void i ts warranty. NOTE T h is d e vi c e c o m pl i e s w i t h p a rt 15 o f t h e F CC r u l e s. O p e ra t i on i ...

  • Agilent Technologies N2610A - page 235

    Specifica t i ons 9 Ports Agil ent FrameSc ope 35 0 User ’s Manua l 227 Ports Smart Probe test po rt At tachment point fo r test probes . Interface cont ain s high performanc e signal channels for measurement func ti ons a nd two-way control int erface for reading and cont rolli ng active test probes. Serial port Allo ws the FrameScope 350 or Dua ...

  • Agilent Technologies N2610A - page 236

    228 Agi lent Fra meS cope 35 0 User’s Man ual 9 Speci f ica tions Ports CompactFlash™ card slot Provides removable n on- volatile s t o rage for te s t re s ult files. S upports any st andard Compact F l ash™ s torage car d. Dens iti es as high as 512MB are pr esently avai lable. Data stored in standar d f o rm at compatibl e wit h PCMCIA-A T ...

  • Agilent Technologies N2610A - page 237

    Specifica t i ons 9 Di spla y Agil ent FrameSc ope 35 0 User ’s Manua l 229 Disp lay 6.625 ” ( 16.83 cm) di agonal back li t color LCD. Resol u t ion: 240 (H) x 640 (V). The display is ca pable of display ing text an d graphics in up to 25 6 col ors. ...

  • Agilent Technologies N2610A - page 238

    230 Agi lent Fra meS cope 35 0 User’s Man ual 9 Speci f ica tions Fiber SmartProbe+ Fib er SmartProb e + Ge nera l Fibe r Smar tPro b e+ 850nm, Fiber S m a rtPr o be + 1300nm Fibe r Smar tPro b e+ 1310nm, Fiber S m a rtPr o be + 1550nm Size 2. 4” x 1.6” x 0. 8” (6. 0 cm x 4. 0 cm x 2.5 cm) 2.4” x 1.6” x 0.8” (6. 0 cm x 4. 0 cm x 2.5 c ...

  • Agilent Technologies N2610A - page 239

    231 Agilent T echnologies Agi l e nt N2610A Fram e S c op e 350 Netw ork Per forman ce An alyzer Use r’ s M a nua l 12 Glossary Glossary 232 ...

  • Agilent Technologies N2610A - page 240

    232 Agile nt FrameScope 350 User’s M anua l 9 Gl ossar y Gloss ary Gloss ary ARP A ddr ess Resolut ion Protocol - A broad cast protocol used to di sco ver th e lo w lev el (MA C) addre ss that corres ponds t o th e hi gher level (IP , IPX , e tc. ) ad dres s. Auto Di scover y Proactively request ing inf o rm a t ion abou t the netw ork. Also call ...

  • Agilent Technologies N2610A - page 241

    Glossar y 9 Glossary Agil ent F rameScope 35 0 Us er’ s Manual 233 assi gned to them. DHCP assi gns a un i que IP addr ess . A de vice ma y reque st a s ubn e t mask, def ault ro uter addr ess, na me serve r addres s, and other parameters and addresses . DHCP ser ver Any of s evera l k ind s of devic es t h at p rovide DH CP servi ces. Thes e com ...

  • Agilent Technologies N2610A - page 242

    234 Agile nt FrameScope 350 User’s M anua l 9 Gl ossar y Gloss ary Frame Dat a org ani zed i n b yt e s encapsulat ed wit h a hea der and a trail e r con taining inf or m ation regar ding the data. Frame and pac k et are some time used inte rcha ngeab ly. Fram e T y pe The f or mat of t h e fram e. Some exam ples are: SN AP/IP , SN AP/IPX, 802. 3 ...

  • Agilent Technologies N2610A - page 243

    Glossar y 9 Glossary Agil ent F rameScope 35 0 Us er’ s Manual 235 MIB Management Inf ormation Base - A set of parameter s that are a vailable an d somet imes cus tomizable that an SNMP mana gement st ation can quer y. Use d to repor t st atus or configurat ion inf or ma tion of compon ents of a netw ork. Multicas t A su bset of a Bro adcast wher ...

  • Agilent Technologies N2610A - page 244

    236 Agile nt FrameScope 350 User’s M anua l 9 Gl ossar y Gloss ary Serv er A com puter or serv ice that is shar ed am on g stations on the n e tw ork. Any d evice in the networ k that pr o vides s ervices upon re quest . SM TP S im ple Mail Transf er Pr ot oc ol - The Internet elec tron ic mail protocol used to tra nsf er mail b etw een host s. S ...

  • Agilent Technologies N2610A - page 245

    Glossar y 9 Glossary Agil ent F rameScope 35 0 Us er’ s Manual 237 UN IX se rve r A device p r ov idin g servic e s in a networ k and r un ning a vers ion o f t he Unix ope rati ng sy ste m. A UNI X ser ver is us uall y an NFS serv er . Ut iliz a tio n A measure of ho w much of the netw ork’s bandwi dth is bei ng used. It is usu ally expres sed ...

  • Agilent Technologies N2610A - page 246

    238 Agile nt FrameScope 350 User’s M anua l 9 Gl ossar y Gloss ary ...

  • Agilent Technologies N2610A - page 247

    Agil ent FrameSc ope 35 0 User ’s Manua l 239 INDEX A ac ad apte r sp ec if ic ati ons, 226 ACR mea s u rement, 214 Ac tive Di scove ry, 18 2 amb ient n oise meas uremen t , 215 at tenuat i on me asurem ent, 213 B Ba cklig ht, 1 62 Bac kup Dom ain C ontrol l er test , 199 Battery ch arg ing , 1 1 indicator on Dua lRemote , 2 21 St atus, 16 0 bli ...

  • Agilent Technologies N2610A - page 248

    240 A gilent F ram eScop e 350 Use r’s Ma nual 5988-714 2EN N Network cert ifyi ng, 136 co nne cting t o, 12 co nne cti on, 1 79 Limits, 1 25 T e sti ng Ov e rvie w, 16 netwo rk resou rc e s list , 1 8 Netw ork T ools M enu, 205 NE XT measur emen t, 213 NFS File S erve r test , 1 92 Nov ell se rv er test, 19 9 NVP lear ning c oppe r, 138 lear ni ...

Produzent Agilent Technologies Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Agilent Technologies N2610A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Agilent Technologies
- Bedienungsanleitungen N2610A
- Produktkarten Agilent Technologies
- Informationsbroschüren
- oder Energieetiketten Agilent Technologies N2610A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Agilent Technologies N2610A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Agilent Technologies N2610A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Agilent Technologies N2610A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Agilent Technologies N2610A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Agilent Technologies N2610A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Agilent Technologies N2610A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Agilent Technologies N2610A verständlich ist.

Eine gänzliche Bedienungsanleitung von Agilent Technologies sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Agilent Technologies N2610A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Agilent Technologies N2610A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Agilent Technologies N2610A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Agilent Technologies N2610A - die uns die ersten Schritte während der Nutzung von Agilent Technologies N2610A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Agilent Technologies N2610A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Agilent Technologies N2610A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Agilent Technologies N2610A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Agilent Technologies N2610A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Agilent Technologies N2610A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)