-
Adaptec MAN-FC2002-001 - page 1
2Gb SANb loc S eri es Inst allation Guide P/N: MAN-FC2002-001 Revis i on: 1. 4 September 2 00 3 ...
-
Adaptec MAN-FC2002-001 - page 2
...
-
Adaptec MAN-FC2002-001 - page 3
D i s c l a i m er 3 Disclaimer and W arranty Di s c laimer ADAPTEC r e s e r v e s t he r i ght t o make c h anges to this man u al and t h e eq u i pme n t desc r i bed he r e i n w i t h out n o t i ce. ADAPTEC h a s m a d e a ll r e a s o n a b le e f fort to i n sure t h a t the informat ion in this manual is accu rate and complete. How e v e ...
-
Adaptec MAN-FC2002-001 - page 4
Warranty 4 ADAPTEC , fr e ight p r e p aid. ADAPTEC , u p on v e r i f i - cation of warranty , will repair or replace at its option the 2Gb SANbloc component in question, and will then r eturn the prod uct to the P urchaser , f reight pr epaid. Ca b l e W a rra n t y - A l l ADAPTEC p r o v i d ed cab l e s are warranted fo r ninety (90) days from ...
-
Adaptec MAN-FC2002-001 - page 5
Warranty 5 Returned Material - W arranty claims must be received by ADAPTEC w it h in the a pp l i ca b l e w a rr a n t y p e r i o d . A replaced produ ct, or part thereof, shall bec ome the property of E U R O LOG I C a n d sha l l be r e tu r ned t o ADAPTEC at Purchaser ’ s expense. All returned material must be accom- panied by a Return Mat ...
-
Adaptec MAN-FC2002-001 - page 6
Warranty 6 THE EXP RESSE D W ARRANTI ES SET FO R TH I N THIS AGREEMENT ARE IN LIEU OF ALL OTHER W ARRANTIES , EXPRESSED OR IM P LIED, INC LUDING WITHOUT LIMIT A TION, ANY W ARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A P AR TICULAR PURPOS E, AND ALL SUCH O THER W AR RANTIES ARE HEREBY DISCLAIMED AND EXCLUDED BY EUROLOGIC. THESE ST ANDARD EXPRESS W ...
-
Adaptec MAN-FC2002-001 - page 7
7 T able of Conten ts Preface ............... ............. ............. ............. .................... ....... 13 Audience ...... ....................... ...................... ............................ ................... 13 Conventions Us ed In This User Guide ...................... ....................... ....... 13 Getting Support .... ...
-
Adaptec MAN-FC2002-001 - page 8
8 Mechanical Loading .............. ............................ ....................... ....... 31 Electrical Considerations ............... ...................... ............................. ....... 32 Circuit Overloading ............... ...................... ............................. ....... 32 Setting Fibre Channel Lo op Speed (2Gb or 1G ...
-
Adaptec MAN-FC2002-001 - page 9
9 Controller Cir cuit Board ............. ............................. ...................... .. 49 I/O Circuit Board ............. ....................... ............................ ............. 50 Ethernet Circuit Bo ard ........... ...................... ............................. ....... 50 RAID Controller Location .......... ........... ...
-
Adaptec MAN-FC2002-001 - page 10
10 Removing a D isk Drive Carrier................... ................. ................... 77 Installing and R emoving an LS Module .............. ....................... ............. 79 Installing an LS Mo dule ................... ................. ....................... ....... 79 Removing an LS Mod ule ............ ............................ ...
-
Adaptec MAN-FC2002-001 - page 11
11 AC Power Supply In put.......................... ...................... ................... 97 Temperature ............ ....................... ...................... ................. ................... 97 Humidity ....................... ...................... ....................... ................. ............. 97 Altitude ............... ...
-
Adaptec MAN-FC2002-001 - page 12
12 ...
-
Adaptec MAN-FC2002-001 - page 13
Audie nce 13 Pr eface This Installation Guide describes the i nst allation and operatio n of the 2Gb SANblo c Ser ies. The following products are cover ed: FC2101CDT2-AC, FC2 101CDR2-AC, FC2101ODT2-AC, FC 2101ODR2-AC, FC2101MDT2-AC, FC2101MDR2-AC. Audience This Installation Guide is intended for use by the person installing and opera ting the 2Gb S ...
-
Adaptec MAN-FC2002-001 - page 14
Getting Support 14 Getting S upport If you ar e having difficulties installing or operating your 2Gb SANbloc S eries you can contact our W orl d W ide S uppo r t C e n t r e f o r assis t ance Monday-Friday 3am to 5pm Pacific : FCC S tatement W ARNING: Changes or modi fications to this un it not expr essly approved by the pa rt y r esp onsibl e for ...
-
Adaptec MAN-FC2002-001 - page 15
VCCI 15 VCCI Englis h T rans l ati on : This is a Class A product based o n the standard of the V olunt ary Control C ouncil for Inter ference by Inf ormation T echnology Equipmen t. If this equipment i s used in a domestic envi ronment, radio disturbance may ari se. When such trouble occurs , the user may be required to tak e corrective actions. E ...
-
Adaptec MAN-FC2002-001 - page 16
Safety Stat ements 16 Safety S tatements The followin g saf ety statements must b e rea d be fore instal lation. For language translations of these statements refer to Appendix B . CAUTION: This e quipment is intended only for installatio n in a restrict ed ac cess location. CAUTION: Allow di sk d rives an d p ower supp lie s to reach ro om ambien ...
-
Adaptec MAN-FC2002-001 - page 17
Safety Statements 17 CAUTION: The tower skin set is not a field replaceable unit and therefore mu st not be remo ved from the Storage Array . CAUTION: After removing the LS Module the resulting hole must be blo c ked, by inst alling a blan king plate or by inst alling a replace ment LS Module . Failure to do so can di srupt air f low an d seriously ...
-
Adaptec MAN-FC2002-001 - page 18
Safety Stat ements 18 ...
-
Adaptec MAN-FC2002-001 - page 19
Introduction 19 Chapter 1: Introduction This Chapter introduces the 2Gb SANbl o c Series. The main features of the Series are de scribed along with a list of the models that are availabl e. Intr o duction The 2Gb SANbloc Seri es provides a highly fl exible, high performance stor age solution that evol ves to meet your changing need s. Based on a mo ...
-
Adaptec MAN-FC2002-001 - page 20
Feat ures 20 • Downward compa tible to 1GB. • Dense enclos ur e with 14 dr ives in a 3U form fact or . • Scalab le to 8.2T B (1 12 drive s), suppor t for 15K rpm drives. • Enhanced enclosure services (SE S) mo ni toring and reporting. • No single point of failure, with redu ndant, hot-swappa ble com ponent s. • Intuitive, c omprehensive ...
-
Adaptec MAN-FC2002-001 - page 21
Featur es 21 Cooli ng S yste m Coolin g is provided by the two Advan ced Cooling M odules (ACMs) located at t h e rear of the enclosure. Each of the ACM units contain two variable speed fans. The enclosure requires four fans for n ormal oper ation, but will operate correctly wit h one fan failed (redund ancy is lost if one fan is failed in either A ...
-
Adaptec MAN-FC2002-001 - page 22
Feat ures 22 I/O Opti on Module s The two rear I/O option sl ots (A and B) can contain a r ange of different opti on modules. The LS module wil l detect the type of option modul e instal led. The available opt ion modules are: I/O Expansion Module - Copper/Copper This 2Gb FC expansi on module has two HSSDC connect ors. The top connector is the prim ...
-
Adaptec MAN-FC2002-001 - page 23
Featur es 23 I/O Expansion Module- Optical/Optical This 2Gb F C expansion modu le has two S FF LC opt ical connectors. The top connector is the FC Loop Input port and the botto m connector is f or FC Loop E xpansion. A loop back terminat or is not required. 2Gb SANbloc RAID Controller The 2Gb SANbloc RAID Controller is a high performance controller ...
-
Adaptec MAN-FC2002-001 - page 24
Feat ures 24 Figure 1-2: 2Gb SANblo c Series T ower Model 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 0 1 2 3 4 5 0 1 2 3 4 5 SAN bloc Series 2 Gb ...
-
Adaptec MAN-FC2002-001 - page 25
Featur es 25 Figure 1-3 : 2Gb SANbl oc Se ries Rack M odel 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 0 1 2 3 4 5 SAN bloc Series 0 1 2 3 4 5 2 Gb ...
-
Adaptec MAN-FC2002-001 - page 26
Feat ures 26 ...
-
Adaptec MAN-FC2002-001 - page 27
27 Chapter 2: Installation and Setup This Chapter describes the in stallation and set up of the 2Gb SANbloc Series. Import ant safety instructions are discus sed along with the electrical, mechani cal and environmental precautions that need to be taken. Items that need to be set prior to operating the 2Gb SANbloc enclosure are al so described here. ...
-
Adaptec MAN-FC2002-001 - page 28
Safety Stat ements 28 Safety S tatements The following safety statements must be r ead before you install or o perate the 2Gb SANb loc Series. For l anguage translations of these statements refer to App endix B. CAUTION: This e quipment is intended only for installatio n in a restrict ed ac cess location. CAUTION: Before a ttempting to inst all or ...
-
Adaptec MAN-FC2002-001 - page 29
Safety Statements 29 CAUTION: It is re commende d that, if interconnecting e quipment resides wit hi n more than on e equipm ent ra ck cabin ets, these equipme n t racks should be at the same gro und potential. W ARNING: A possi ble shoc k hazar d may exi st in the area of th e fan c onn ect i on. W ARNING: Disco nnect the power cords be fore remo ...
-
Adaptec MAN-FC2002-001 - page 30
Unpacking and In itial Setup 30 Unpack ing a nd Init ial Se tup When you receive your system, visually inspect the exterior of the packaging for any signs of dama ge. If any damage is f ound t he ca rr i er a n d Adaptec shou l d be i n f o r m ed i mmed i - ately , and they will advise you of the appropriate acti on. The cartons are sealed using p ...
-
Adaptec MAN-FC2002-001 - page 31
Installing the S ystem in an Equ ipment Rack 31 Air Flow T o ensure that the inter nal heat buil d up is proper ly dissi- pated into the room envir onment, air flow should in no way be restricted. It is essential th at no air vents are blocked, and that the system is a mi nimum of one meter from a solid surface such as a wall or partition. Air f lo ...
-
Adaptec MAN-FC2002-001 - page 32
Electric al Considera tions 32 Electric al Consideration s When installing the 2Gb SANbloc Series the following electrical considerations must b e applied. Circuit Overloading Care should be taken to ensure that t he current does no t exceed the rating of t he power source circuitry . This includes cabl ing, power dist ribution unit s, filters and ...
-
Adaptec MAN-FC2002-001 - page 33
Settin g Fibre Channe l Loop Speed ( 2Gb or 1Gb) 33 1Gb Operation T o set the fibre channel loop speed to 1Gb operat ion: 1 Remove the LS mo du le from the front of th e enc losure. 2 On the LS Module loca te the jumper po sitio n JP 2 (Fig ure 2-1 ) . 3 For 1Gb o peration there sh ould be n o jumper instal led at JP2. If one is insta lled, remove ...
-
Adaptec MAN-FC2002-001 - page 34
Split Fibr e Channel Loo p Operation (Q uad Loop) 34 Split Fibr e Channel L o op Operation (Quad Loop) The 2Gb SANbloc Series LS modu le allows for split FC Loop oper ation, with two dual fibr e channel lo ops of seven disk drives each. In this split loop mode the primary port (I/ O Slot A) wil l f orm a l oop using the firs t seve n driv es, 1 to ...
-
Adaptec MAN-FC2002-001 - page 35
Config uration Rules 35 Configurat ion Rules These rules must be applied when implementing t he 2Gb SANbloc Series configurati ons: • When d aisy chai ning, both 2Gb en closur es mus t be con f igured identical ly . • 1Gb and 2 Gb syste ms canno t be dais y chain e d t ogethe r . • T wo LS modules and two I/O modu les are requ ired for du al ...
-
Adaptec MAN-FC2002-001 - page 36
Suppor ted Cables 36 Supported Cables W ARNING: Only the following APPROVED cables mu st be used with the 2Gb SANbl o c Series enc l osures. This section lists the cables that must be used with the 2Gb SANbloc Series enclosure. Failure t o adhere to these guide- lines may cause the enclosure t o operate incorrectly . Copper Cables Only the fol lowi ...
-
Adaptec MAN-FC2002-001 - page 37
Setting the Enclosu re ID 37 Chapter 3: JBOD Configurations This Chapter describes the procedur e for c onnecting your 2Gb SANbloc Series JBOD system to a host computer(s). Detailed inform ation on how to configure and daisy chain enclosures is al so provided al ong with instructi ons on how to set the enclo sure ID. Setting th e Enclosur e ID Each ...
-
Adaptec MAN-FC2002-001 - page 38
Setting the Enc losure ID 38 Figure 3-1 Location of Enclo sure ID Swit ch This enclosure ID switch can be set to 0 through 7. The graphic belo w shows the slot number and l ocation. 1 2 1 2 0 I 0 I Enclosure ID Switch 1 LSM LSM Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8 Slot 9 Slot 10 Slot 1 1 Slot 12 Slot 13 Slot locatio n when ...
-
Adaptec MAN-FC2002-001 - page 39
Setting the Enclosu re ID 39 The fourt een disk drive slot s (0 to 13) , will be assigned an identifier based on the enclosure I D and the slot number as shown in T able 3-1. T able 3-1 Disk Drive Id en tifier T able Enclosure ID Drive Slot 01234567 Slot 0 3 18 33 48 63 78 93 108 Slot 1 4 19 34 49 64 79 94 109 Slot 2 5 20 35 50 65 80 95 11 0 Slot 3 ...
-
Adaptec MAN-FC2002-001 - page 40
Configu rations 40 Configurat ions This section describes the procedur es for cabling the main configurations of the 2 Gb SANbloc Series JBOD. Note: The follo wing configur ation pr ocedures refer to con n ecti ng t he 2 Gb SAN bl oc Ser ies dir ectly to t he h ost system . It is also pos si ble to conne ct the sy ste m usi ng a Hub/ Switch. CAU TI ...
-
Adaptec MAN-FC2002-001 - page 41
JBOD Con figurations 41 JBOD Configurations There are tw o JBOD configurations covered in this I nstal- lati on Guide : • Dual FC L oop mo de ( inclu din g how to dai sy chai n enclos ures) • Quad Loop (single en cl osu re with 4 FCAL l oo ps) Note: The follo wing exampl es show the Cop per/Copper I/O Module o ption for illu stration purp oses. ...
-
Adaptec MAN-FC2002-001 - page 42
JBO D C onfigur ation s 42 Note: For detai ls on y our h ost an d/or HBA r efer to t he documen - tation t hat was supplied wit h the host / HBA. Figu re 3-2 Connecti ng du al FC Loop confi gura tion t o a ho st See Appendix C for Loop Diagram. T o daisy chain enclosures to gether , connect link cables from the bottom connector s on th e I/O module ...
-
Adaptec MAN-FC2002-001 - page 43
JBOD Con figurations 43 Figur e 3-3 Da isy chaining dual FC Lo op enclosur es See Appendix C for Loop Diagram. CAUTION: When daisy chai nin g enclosure s, you must ensu re that eac h enclosure has a unique Enclo sur e ID. 1 2 1 2 0 I 0 I T o HBA 1 2 1 2 0 I 0 I T o next enclosure T o HBA T o next enclosure ...
-
Adaptec MAN-FC2002-001 - page 44
JBO D C onfigur ation s 44 Quad Loop Configuration Note: Quad loop con figu ration requires tha t the en closure be configure d in s plit l oop m ode. T o set split l oop mo de, a jumpe r must be inst alled at ju mper locatio n JP3 on each LS module in th e enc los ure . This section describes the procedure for connect ing the enclosure in quad loo ...
-
Adaptec MAN-FC2002-001 - page 45
Conne cting a Powe r Source 45 Connecting a Power Sourc e The 2Gb SANbloc enclosure supports dual AC power supplies. Only one power supp ly is r equired fo r nor mal operation. However, a second, optional po wer suppl y may be added to p rovide a redu ndant power system. Each power supply has its own AC power inlet. CAUTION: Power supply cords shal ...
-
Adaptec MAN-FC2002-001 - page 46
Disk D rive Sp in Up Sequence 46 Disk Drive Spin Up Sequen ce At power on, th e LS module wi ll per form its in ternal start up initial ization r outine. Th en the LS module wi ll assert the disk drive ST AR T_1 and ST AR T_2 motor start si gnals low for disk drive slots 7 through 13, which will spin up the first 7 disk dr ives immediately . Th e L ...
-
Adaptec MAN-FC2002-001 - page 47
2Gb S ANbloc Serie s RAID Con troller Introd uction 47 Chapter 4: RAID Configurations This chapter describes how to set up, configure and use the 2Gb SANbloc S eries RAID Controll er . Some general infor- mation about th e RA I D controller is also provi ded. 2Gb SANbloc Series RAID Controller Introduction The 2Gb SANbloc RAID Controller is a high ...
-
Adaptec MAN-FC2002-001 - page 48
2Gb SANbloc Series RAID Contr oller Introductio n 48 host an d devi ce f ibre channel i nput/ ou tput pr o cessor s (IOPs ). • I/O: The I/O circu i t b oard prov ides the int erface t o t he disk drive en cl osure (dev i ce) and host as well as gene ral support func tions. I t also con t ains the swit ching p ower supp ly , which generates +3 .3 ...
-
Adaptec MAN-FC2002-001 - page 49
RAID Con troller Circuit Bo ards 49 Features of the RAID Controller include: • Main pro cessor coupled with a co mpanion chip • Propriet ary XOR en gine ASIC that pro vides data pro cessing XOR fu nct ion and data ca che SDRAM contro l • Four 2Gb -capabl e fibre p rotoc ol chip s for the dev i ce and ho st ports • Dual inte rna l 52 8 MB /s ...
-
Adaptec MAN-FC2002-001 - page 50
RAID Contr oller Circuit Boa rds 50 • Cache DIMM mem or y I/O Cir cuit Board The I/O circuit board provides the interface between the enclosure and a host, as well as general support functions. The I/O circuit board pr ovides the following: • Connections to the host • Connecti ons to the en cl osure • Dual switc hing p o wer supply for +3.3 ...
-
Adaptec MAN-FC2002-001 - page 51
RAID Con troller Circuit Bo ards 51 It has a 32 bit, 33 MHz max imum PCI interface and features scatter-gather bus master ing, which enables it to perfor m high speed data transfers on the PCI bus. It operates in either full duplex mode or half duplex mode. I t has a four wire interface to a serial EEPROM, which can p rovide power -on initia lizati ...
-
Adaptec MAN-FC2002-001 - page 52
RAID Contr oller Circuit Boa rds 52 The main parts of t h e RAID Controller are described in Figure 4-3. Figure 4-3 Main compon ents of RAID controller RAI D Cont r olle r St a t u s L E D s The RAID cont roller has 7 Statu s LEDs as shown above. T able 6-1 describes what these LEDs signify . T able 6- 1 Contr oller S tatus LEDs 1 2 3 4 5 6 7 FC Ho ...
-
Adaptec MAN-FC2002-001 - page 53
RAID C ontroll er Con figuratio ns 53 RAID Controller Configurations This section describes how to cable the two standard RAID controller configurations: Single RAID Controller and Dual RAID Controller (d ual active). The procedure f or daisy chaining these stand ard configurations to expansi ons enclo- sures is also d escribed. This section also d ...
-
Adaptec MAN-FC2002-001 - page 54
Setting the Enc losure ID 54 Figure 4-4 Location of Enclo sure ID Swit ch This enclosure ID switch can be set to 0 through 7. The graphic belo w shows the slot number and l ocation. The fourt een disk drive slot s (0 to 13) , will be assigned an identifier based on the enclosure I D and the slot number as shown in T able 6-2. 1 2 1 2 0 I 0 I Encl o ...
-
Adaptec MAN-FC2002-001 - page 55
Confi guratio ns 55 T able 6-2 Disk Drive Identifier T abl e Configurat ions This section shows how to connect the RAID enclosures to a host system(s). The pro cedure for daisy chaining the encl o- sures together i s also described. Enclosure ID Drive Slot 01234567 Slot 0 3 18 33 48 63 78 93 108 Slot 1 4 19 34 49 64 79 94 109 Slot 2 5 20 35 50 65 8 ...
-
Adaptec MAN-FC2002-001 - page 56
Configu rations 56 Single RAID Controller Configuration In this con figurati on o nly one R AID contr oller is instal led in the enclosure’ s I/O slot. T he second I/O slot must cont ain an I/O module or a blank plate. Note: The follo wing configur ation pr ocedures refer to con n ecti ng t he 2 Gb SAN bl oc Ser ies dir ectly to t he h ost system ...
-
Adaptec MAN-FC2002-001 - page 57
Confi guratio ns 57 Figure 4-5 Single RAID Controller to Host Connector Daisy Chaining a Single Controller Enclosure T o daisy chain th e RAID enclosure to an expansi on enclosure, connect link cables from the RAID co ntroller to the top connectors of the I/O modules of the expansion enclosure (see Figure 4-6). Note: A maximu m of eigh t enclosures ...
-
Adaptec MAN-FC2002-001 - page 58
Configu rations 58 Figu re 4-6 Dai s y Cha ini ng Sin gle C o ntroll er En clos ure CAUTION: When daisy chai nin g enclosure s, you must ensu re that eac h enclosure has a unique Enclo sur e ID. 1 2 1 2 0 I 0 I 1 2 1 2 0 I 0 I T o next enclosure Link Cable I/O Module T o next enclosure Connect this cable f or dual loop operation Link Cable T otal o ...
-
Adaptec MAN-FC2002-001 - page 59
Confi guratio ns 59 Dual RAID Controller Configuration In this configuration two RAID Controllers are installed in the enclosures I/O slots. Note: The follo wing configur ation pr ocedures refer to con n ecti ng t he 2 Gb SAN bl oc Ser ies dir ectly to t he h ost system . It is also pos si ble to conne ct the sy ste m usi ng a Hub/ Switch. CAU TI O ...
-
Adaptec MAN-FC2002-001 - page 60
Configu rations 60 Figure 4-7 Dual RAID Controller Configuration Daisy Chaining a Dual Controller Enclosure T o daisy chain th e RAID enclosure to an expansi on enclosure, connect link cables from the RAID en closure to the top connectors of the I/O modules of the expansion enclosure (see Figure 4-8). Note: A maximu m of eigh t enclosures may be da ...
-
Adaptec MAN-FC2002-001 - page 61
Confi guratio ns 61 Figure 4-8 Daisy Chaining a Dual Con troller Enc l osure CAUTION: When daisy chai nin g enclosure s, you must ensu re that eac h enclosure has a unique Enclo sur e ID. 1 2 1 2 0 I 0 I 1 2 1 2 0 I 0 I T o next enclosure T o next enclosure Link Cable Link Cable T otal of 8 enclosures may be daisy chained together . 1 2 3 4 5 6 7 H ...
-
Adaptec MAN-FC2002-001 - page 62
Conne cting a Powe r Source 62 Connecting a Power Source The 2Gb SANbloc enclosure supports dual AC power supplies. Only one power supp ly is r equired fo r nor mal operation. However, a second, optional , power supply may be added to provide a redundant power system. Each power supply has its own AC power inlet. CAUTION: Power supply cords shall h ...
-
Adaptec MAN-FC2002-001 - page 63
Disk Drive Spin Up Sequen ce 63 Disk Drive Spi n U p Sequence At power on, th e LS module wi ll per form its in ternal start up initial ization r outine. Th en the LS module wi ll assert the disk drive ST AR T_1 and ST AR T_2 motor start si gnals low for disk drive slots 7 through 13, which will spin up the first 7 disk dr ives immediately . Th e L ...
-
Adaptec MAN-FC2002-001 - page 64
Disk D rive Sp in Up Sequence 64 ...
-
Adaptec MAN-FC2002-001 - page 65
Overv iew 65 Chapter 5: System Mon itor ing This Chap ter describes the d evices used to monitor the 2Gb SANbloc Series. Th e location of the monitoring LEDs and how to in terpret them i s describ ed. Overvi ew The front mounted LS modu le is the main monitoring device of the 2Gb SANbloc Series. This module is comple- mented by st atus and fault L ...
-
Adaptec MAN-FC2002-001 - page 66
LS Modu le 66 system. If the active L S Module fails, then the ESI co mmu- nication with the host syst em will be taken over by the passive LS Modu le. LS Mo dule Fe atures • Monitorin g/Control for 2 Power Supplies and 2 ACMs • Reports statu s and receive s control in forma tion via t he FC loop • Microcon troller for data pro cessing, co nt ...
-
Adaptec MAN-FC2002-001 - page 67
LS Mod ule 67 Figure 5-1 Location of 2Gb SANb l oc Encl osure LEDs T able 5-1 shows t he meani n g of each of the LEDs, and how to int erpret them. 0 1 2 3 4 5 LED 0 LED 1 LED 2 LED 3 LED 4 LED 5 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 0 1 2 3 4 5 SAN bloc Series 0 1 2 3 4 5 2 Gb ...
-
Adaptec MAN-FC2002-001 - page 68
LS Modu le 68 Note: The audi ble alarm will s ound when an e rror is detected . CAUTIO N : If 1 G B an d 2G b ha rdware is mi xed in an e nc lo sure at power up, a n d the enclosure i s set to 2Gb , the drives will no t spin up and LE D 5 w ill flash . T able 5-1 Enclosure LED Descri ptions Descript ion Color Indication LED 0 Power On Green Normall ...
-
Adaptec MAN-FC2002-001 - page 69
Disk D rive LE Ds 69 Disk Drive LEDs Each disk drive carrier has tw o LED indicators visible from the front of the 2Gb SANbloc enclosure. The green disk drive ready L ED is control led by the disk dr ive, and the bi-colo ur LED is con trolled by the LS Modul e. The following tabl e shows how to interpret th es e LE Ds. a. The shelf fau lt Amber LED ...
-
Adaptec MAN-FC2002-001 - page 70
Dis k Drive LED s 70 Figure 5-2 Disk Drive Carr i er LEDs 18F Disk Drive Ready (Green) BiColor LED (Green/Amber) ...
-
Adaptec MAN-FC2002-001 - page 71
Power Supply LEDs 71 Power Supply LEDs The 2Gb SANblo c Series uses t w o AC power supplies. The AC power supplies provid e 853 W peak output power and 673W continu ous o utput power . The 2Gb SANbl oc Series power supply has two LED indicators on it, which are visible from the rear of the enclosure. The green Power OK LED is on when the power supp ...
-
Adaptec MAN-FC2002-001 - page 72
Advanc ed Cooling M odule (ACM) LE Ds 72 Advanced Cooling Module (ACM) LEDs The 2Gb SANbloc Series has two variable speed fans per advanced cooli ng module. Each of t he two ACMs o n t he rear of the 2Gb SANbloc Series enclosure has two fault LEDs visible from the rear of t h e enclosure. The LEDs ar e labeled “1” and “2” to correspond with ...
-
Adaptec MAN-FC2002-001 - page 73
RAID C ontroller LEDs 73 RAID Controller LEDs The RAID controller has 7 LEDs located and numbered as shown. Figure 5-5 RAID contr oller LEDs The table below describes the LEDs mean ing. T able 5- 3 Contr oller S tatus LEDs LED Description 1 Y ellow - Not Ready . No rma lly Off. Goes On d uring power up sequ ence . 2 Gree n - Re ady . Normal ly On 3 ...
-
Adaptec MAN-FC2002-001 - page 74
RAID Contr oller LEDs 74 ...
-
Adaptec MAN-FC2002-001 - page 75
75 Chapter 6: Installing and Removing Compo- nent s This Chap ter describes the pro cedures for installi ng and removing the replaceable components in the 2Gb SANbloc Serie s. W ARNING: The module handle s are to fa cilitate the easy inser- tion and re m oval of the modules, they sho uld not be used to lift and/or ca rry the enclos ur e. ...
-
Adaptec MAN-FC2002-001 - page 76
Loca t ion o f the Compon ents 76 Location of the Components 1 2 1 2 0 I 0 I Disk D rives LS ACMs Power Supp lies I /O Module/ I/O Module/ 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 18F 0 1 2 3 4 5 SAN bloc Series 0 1 2 3 4 5 2 Gb Module LS Module RAID Con troller RAID Controller ...
-
Adaptec MAN-FC2002-001 - page 77
Install ing and Remov ing a Disk Drive Carr ier 77 Installing and Remo ving a Disk Driv e Carrier The disk drive carriers are located in th e front of the enclosure. Follow these procedures to install and remove the disk drive carrier . Install ing a Disk Drive Carrier 1 Select the disk drive slot into which the disk drive carrier is to be installe ...
-
Adaptec MAN-FC2002-001 - page 78
Installing an d Removing a Disk Drive Car rier 78 Figure 6-1 Disk Drive Carrier 18F Cam Lever Push loc king tab in this direction to open ...
-
Adaptec MAN-FC2002-001 - page 79
Installing an d Removing a n LS Module 79 Installing and Removing an LS Module The LS M odules are located in the front of the enclosure. Follow these procedures t o install and remove the LS Modules. Install ing an L S Module 1 Select the LS Module slo t in to which the LS Module is to b e inserted a nd remove the LS bla n k if one is installe d. ...
-
Adaptec MAN-FC2002-001 - page 80
Installing an d Removing a n LS Module 80 Figu re 6-2 LS Module 0 1 2 3 4 5 Cam Lever Push lockin g tab in thi s directio n to op en ...
-
Adaptec MAN-FC2002-001 - page 81
Installing an d Removing a Power Supp ly 81 Installing and Removing a Power Suppl y The power supplies are located in the rear of the enclosure. Follow these procedures to install and remove the power supplies. Install ing a Pow e r Supply 1 Select the powe r supply slot in to which th e power supp ly is to be inserted an d remove the carri er blan ...
-
Adaptec MAN-FC2002-001 - page 82
Installing an d Removing a n Advanced Co oling Module 82 Installing and Removing an Advanced Cooling Module The advanced coo ling modules are l ocated in the rear of the enclosure. Follow these procedures to install and remove the advanced cooling modules. Install ing an Advanced C ooling Module 1 Select t he adva nced coo l ing modu le slot into w ...
-
Adaptec MAN-FC2002-001 - page 83
Installing an d Removing an I/O M odule/RAID Cont roller 83 Installing and Removing an I/O Module/ RAID Contr oller Note: In the fol lowing section, “I/O Module” is tak en to include the RAID Con troller in addition to th e I/O Module. The I/O modul e is located i n the rear of the enclosure. Follow these procedures to i nstall and remove the I ...
-
Adaptec MAN-FC2002-001 - page 84
Installing an d Removing an I/O M odule/RAID Con troller 84 ...
-
Adaptec MAN-FC2002-001 - page 85
85 Appendix A: Safety S tatement T ranslations CAUTION: This eq uipment is intended o n ly for installation in a restricted acce ss location. ACHTUNG: Dieses Gerä t sollte nur an einem Ort mit Zu gang- skontro lle installiert werden. FÖRSIKTIGHET : Denna utrustning får endast installera s på ställe me d be grä nsad åtkomst. V AROITUS: Laitte ...
-
Adaptec MAN-FC2002-001 - page 86
86 CAUTION: Allow disk drives and power supp lie s to r e ac h room ambi e nt temperature befor e powering on the s helf. ACHTUNG: Ehe Laufwerk e und Netzteile an die S tromverso r- gung angesch lossen wer de n, sollten sie sich an die Raumtemp er- atur an gepasst habe n. FÖRSIKTIGHET : Låt skivdriven heter och strömtillför sel nå rumstemp era ...
-
Adaptec MAN-FC2002-001 - page 87
87 CAUTION: It is recom mended that if inte rconnecting e quip- ment resides within more than one equip men t ra ck cabinet, these rac k cabin ets shou ld be at the sa me gr ound potential. ACHTUNG : Befinden s ich V erbindungsel e mente in mehr als einem Rack-Geh äuse, sol lten die Racks das selbe Massep otential aufw eisen. FÖRSIKTIGHET : Vi re ...
-
Adaptec MAN-FC2002-001 - page 88
88 CAUTION: Before attempting to install or rem ove any of the components, ensur e that anti-static precautio ns have been taken. The min imum requirement is a properly grounded anti - static wrist s trap and gr ounding wir e . ACHTUNG: V or dem Entfernen ode r Installier en einer Komponen te sollte sich ergestellt werd en, dass antista t is che V ...
-
Adaptec MAN-FC2002-001 - page 89
89 trisitet. Mini mu mskravet er rikt i g jordet antistatisk håndled dstr opp og jordings ledni ng. CAUTION: When installing or removing a rac km ount shelf, re move a ll power supplies and disk drives. I t is reco mmended that yo u work with at le ast one oth e r person when insta llin g a disk shelf. This is n ece ss ary to pr event personal inj ...
-
Adaptec MAN-FC2002-001 - page 90
90 FORSIG TIG: Når en rack mo nteret hylde installe res eller fjernes, skal al strø mforsyn i ng og alle drev fjernes. Det anb e- fales, at der mindst er én anden person til stede, nå r en dre vhylde in stalleres . Det er nødve ndigt for at un dgå person- skade og beska dig else af h ylden. OBS: Når hylle for rackmonteri ng blir inst al l er ...
-
Adaptec MAN-FC2002-001 - page 91
91 CAUTION: The tower skin set is not a field replaceable unit and therefore must not be removed from the S torage Array . ACHTUNG: Das T owe r -Gehäuse kann ni cht am Einsat zort ausgetauscht werd en und sollte desha lb nicht entfernt werden . FÖRSIKTIGHET : Det yttr e höljet är inte en utbytbar e nhet och s kall där för inte avlä gsnas fr? ...
-
Adaptec MAN-FC2002-001 - page 92
92 CAUTION: After rem oving t he LS Module the r esulting hol e must be b locked by install ing a blank ing plate or by installing a repla cement LS Module. Fa ilure to do this can disrupt air flow and serio usly reduce cooling. ACHTUNG: Nach dem Entfernen des LS Module muss di e entstehend e Lücke dur ch eine Blende o der durch die Installa- tion ...
-
Adaptec MAN-FC2002-001 - page 93
93 OBS: Når en LS Module er fjernet, må hullet b lok keres ved å installere en mas keringspla te eller ved å sette inn en anne n LS Module. Dersom dette ikke gjør es, kan det forstyrre lufttil- strøm ningen og gi sterkt r edusert kjøli ng. WAR NI NG : A possib le sho ck h az ard may exist i n the area of the fan conn e ction. VORS ICHT : Im ...
-
Adaptec MAN-FC2002-001 - page 94
94 ...
-
Adaptec MAN-FC2002-001 - page 95
Host Interface 95 Appe ndix B: T ech nical S pecifications Host Inter face • One or two Fibr e Chan nel interface s, 200MBs each, 400 MBs total. • Exte r nal hub an d switch su pport . Disk Drive Interface • Dual indep endent Fibre Channel interfaces, 200MBs each, 400MBs to tal. System Redundant, Hot Swappab le Components • T wo power s ...
-
Adaptec MAN-FC2002-001 - page 96
Physical Dimen sions 96 Physical Dimensions Deskside E nclosure Hei ght: 20 inch es (50.8cm ) W idt h: 9 inches (22.9cm) Depth: 20 inches (50.8c m) W ei ght: 60 lbs (29.5kg) maximum Rack Enclosure Height: 5.22 in ches (13.3cm) W idt h: 17.5 i nches (44.5cm) Depth: 20 inches (50.8c m) W ei ght: 60 lbs (29.5kg) maximum W arranty Three (3) years (5 ye ...
-
Adaptec MAN-FC2002-001 - page 97
Disk Driv es 97 Disk Drives Power Supply AC Power Supply Input T emperature • Operatin g T emperature: 5 o C to 40 o C • T emperature Storage: -40 o C to +70 o C • Maximum rate of tem perature chang e: 20 o C per ho ur Humidity • Rel a t ive Hum idit y Opera t ing: 10 % to 80 %, non- conde nsin g • Max. R ate of Operational H umidity Ch a ...
-
Adaptec MAN-FC2002-001 - page 98
Altitude 98 Altitude • Altitude Op erating: -2 00 to 10,000 feet • Altitude S torage: -200 to 40,000 feet Operational Shock Half sine shock: 3G half sine shock with a pulse duration of 11 milliseconds or l ess. No permanent damag e will occur at or belo w this level . Operat ional V ibration Sinusoidal vibr ation from 5 to 350 Hz at 0.2G (0 to ...
-
Adaptec MAN-FC2002-001 - page 99
Regulator y Ag ency Com pliance 99 Regulatory Agency Compliance Product Safety St a n d a r d s • UL1950 Informatio n T echn ology E quipment (US) • CSA C2 2.2 No 950 Inform ation T echnology Eq uipment (Canadian Law) • EN 6095 0 Info rmati on T echnol ogy Equi pmen t (Euro pean Nor m) Product Safety Third Party Certifications • UL Li sted ...
-
Adaptec MAN-FC2002-001 - page 100
Regulat ory Agency C ompliance 100 ...
-
Adaptec MAN-FC2002-001 - page 101
101 Appendix C: Configuration Loop Diagrams 3 4 5 6 7 8 9 10 11 12 13 14 15 16 External Loop Diagram for a Single Enclosure System - Single Loop Circles den o te disk drives with drive ID shown. Enclosure ID 0 ...
-
Adaptec MAN-FC2002-001 - page 102
102 3 4 5 6 7 8 9 10 11 12 13 14 15 16 External Circl es de note disk dri v es with dr i ve ID show n. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Loop Diagram for a Dua l Enclosure System - Single Loop Enclosure ID 0 Enclosure ID 1 ...
-
Adaptec MAN-FC2002-001 - page 103
103 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Ext erna l Loop Diagram for a Single Enclosure System - Dual Loop Circles den o te disk drives with drive ID shown. Enclosure ID 0 ...
-
Adaptec MAN-FC2002-001 - page 104
104 3 4 5 6 7 8 9 10 11 12 13 14 15 16 External Circles den o te disk drives with drive ID shown. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Enclosure ID 0 Enclosure ID 1 Loop Diagram for a Dual Enclosure System - Dual Loop ...
-
Adaptec MAN-FC2002-001 - page 105
105 Appendix D: Upgrading a 2Gb SANbloc JBOD Array to a RAID Array In this section the procedure for u pgrading a 2 Gb SANbloc Series Storage Array from a JBOD system to a RAID system is described. The equipment an d parts necessary for the upgrade are also d escribed. Equipment and pa rts necessary for upgrade The following is a list of the equip ...
-
Adaptec MAN-FC2002-001 - page 106
106 drive r . 5 If you ar e up gra ding to a dua l RAID co nfigu ration t hen rep eat steps 2 throug h 4 to install the sec o nd RAID controll e r . 6 Attach the ho st cable(s) to the host conn ect or on the RAID controller and attach the ot her end of th e cable (s) to y our HBA / hub/switch (refer to Chapter 4 for more details). 7 Inst all the ba ...
-
Adaptec MAN-FC2002-001 - page 107
107 Installing the Battery Backup Unit The battery backup unit ( BBU) for the RA ID controller i s installed on the ACM uni t (see Figure D- 1). Figure D-1 Lo catio n of Batte ry Ba ckup U ni t on AC M Follow this procedure to install the Bat tery Backup Unit (BBU): 1 Remo ve t he ACM from the enclosu re by loos ening the two ACM screws and using t ...
-
Adaptec MAN-FC2002-001 - page 108
108 Figure D-2 Insta lli ng the BBU 4 Feed the BBU cable through the hole prov ided and c onnect it to the BBU co nnector ( see Figu re D-2). 5 Press the BBU in to position and secure it by e nsuring the four tabs “click ” into place. 6 Replace the ACM in the en closure and tighten the ACM scre ws to compl ete the in stallation. Feed cab le thr ...
-
Adaptec MAN-FC2002-001 - page 109
109 A advanced cooling module, leds, 72 advanced cooling modules, 21, 81, 82 air flow, 31 ambient tempera ture, 30 audience, 13 B battery backup unit (BBU) 107 battery backup unit, location 107 C cabling, dual i/o module, 41 circuit overloading, 32 communication, esi, 65 compliance, agenc y, 99 conventions, 13 current, input, 32 D daisy chaining, 4 ...
-
Adaptec MAN-FC2002-001 - page 110
110 loop resiliency and ses module, 65 ls module, 79 M modulo 8 63 monitoring, system, 65, 96 N notification, 96 O operating temperature, 30 P port bypass circuits, 65 power consumption 32 power output 20 power rating, 32 power source 62 power supplies, 20, 81, 97 power supplies, leds, 71 R rack mounting, 30 raid, 45 redundancy, 95 regulatory agenc ...
Haben Sie eine Frage bezüglich Adaptec MAN-FC2002-001?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Adaptec MAN-FC2002-001 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Adaptec MAN-FC2002-001 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.