Bedienungsanleitung Toro 3.80E+13

12 Seiten 0.23 mb
Download

Zur Seite of 12

Summary
  • Toro 3.80E+13 - page 1

    Operator ’ s Manual Domestic English (EN) Form No. 3327-516 1800 Power Curve  Snowthrower Model No. 38025—220020001 and Up ...

  • Toro 3.80E+13 - page 2

     2002 by The T oro Company All Rights Reserved Printed in USA 2 Contents Page Introduction 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important Safety Instructions 3 . . . . . . . . . . . . . . . . . . Safety and Instruction Decals 4 . . . . . . . . . . . . . . . Assembly 4 . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Toro 3.80E+13 - page 3

    3 I MPORT ANT S AFETY I NSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: R EAD A LL I NST RUCTIONS B EFO RE U SING T HIS A P PLI ANCE W ARNING —T o reduce the risk of fire, electric shock, or injury , follow these safety instructions. It is essential that you or any other operat ...

  • Toro 3.80E+13 - page 4

    4 Safety and Instruction Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger . Replace any decal that is damaged or lost. On Handle 73-0460 1. Read the Operator ’ s Manual. 2. Electrocution 3. Cutting/dismemberment of foot, auger 4. Cutting/dismemberment of fingers/hand, impel ...

  • Toro 3.80E+13 - page 5

    5 1531 1 2 SQUEEZE Figure 2 1. Upper tubing 2. Lower tubing 3. Carefully insert the left side of the upper tubing into the end of the lower left side tubing (Fig. 2). 4. Squeeze the upper tubes together , and wiggle the upper tubes down until the mounting holes in the upper and lower tubing line up (Fig. 2). 5. Place the mounting plate over the tub ...

  • Toro 3.80E+13 - page 6

    6 3. Secure the deflector to the discharge chute with 2 carriage bolts, metal washers, and locknuts. Note: Ensure that the square shoulders on the carriage bolts align with the inside square on the discharge chute. Position the metal washers to the outside of the chute deflector as shown in Figure 5. Do not overtighten the bolts. Before Starting Un ...

  • Toro 3.80E+13 - page 7

    7 the handle socket, insert the enlarged prong into the wide slot in the extension cord end. Refer to Important Safety Instructions on page 3 for additional information. 1540 1 Figure 8 1. Enlarged prong Operation Check the condition of the snowthrower before operating it. Ensure that the rotor turns freely . Starting and Stopping 1. T o start the ...

  • Toro 3.80E+13 - page 8

    8 A gap between the discharge chute and the chute deflector may allow snow and anything that can be picked up by snowthrower to fly in the direction of the operator . Thrown objects could cause serious personal injury . • Do not for ce the chute deflector too far forward so that a gap appears between the discharge chute and chute deflector . • ...

  • Toro 3.80E+13 - page 9

    9 Maintenance Note: Determine the left and right sides of the snowthrower by standing in the normal operating position. If the extension cord is plugged into the snowthrower and the key is in the handle, someone could accidentally operate snowthrower while you are performing maintenance on it, causing serious personal injury . Disconnect the extens ...

  • Toro 3.80E+13 - page 10

    10 1525 1 Figure 16 1. Hex nu t 3. Hold the rotor and pull out the rotor shaft. 4. Remove the rotor . 5. Align the left side of the new rotor with the coupler . The 3 bosses on the rotor end must align with the slots on the coupler (Fig. 17). 1518 3 4 1 2 Figure 17 1. Coupler 2. Boss 3. Slot 4. Drive he x Note: When mounting the coupler to the driv ...

  • Toro 3.80E+13 - page 11

    11 5. Lift up the idler arm and slip the belt under the idler pulley (Fig. 20). 6. Rotate the rotor with your left hand while sliding the belt onto the large pulley with your right hand (Fig. 21). 1529 Figure 21 7. Assemble the idler spring (Fig. 18), making sure the idler pulley rides on the belt. 8. Install the left side cover and the skid with t ...

  • Toro 3.80E+13 - page 12

    The T oro Promise A T wo-Y ear Full W arranty for Residential Use for the United States, Canada, and Mexico General Conditions Th e T oro Company and its af filiate, T oro W arranty Company , pursuant to an agreement between them, jointly warrant this product fo r two years against defects in material or workmanship when used for normal residential ...

Produzent Toro Kategorie Snow Blower

Dokumente, die wir vom Produzenten des Geräts Toro 3.80E+13 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Toro
- Bedienungsanleitungen 3.80E+13
- Produktkarten Toro
- Informationsbroschüren
- oder Energieetiketten Toro 3.80E+13
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Toro 3.80E+13.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Toro 3.80E+13, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Toro 3.80E+13. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Toro 3.80E+13 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Toro 3.80E+13, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Toro 3.80E+13 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Toro 3.80E+13 verständlich ist.

Eine gänzliche Bedienungsanleitung von Toro sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Toro 3.80E+13 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Toro 3.80E+13 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Toro 3.80E+13, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Toro 3.80E+13 - die uns die ersten Schritte während der Nutzung von Toro 3.80E+13 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Toro 3.80E+13 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Toro 3.80E+13 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Toro 3.80E+13?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Toro 3.80E+13 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Toro 3.80E+13 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)