Bedienungsanleitung EverFocus EN-7542H

48 Seiten 4.51 mb
Download

Zur Seite of 48

Summary
  • EverFocus EN-7542H - page 1

    Instruction Manual EN-7542H 42” PREMIUM Wide Screen TFT-LCD MONITOR ...

  • EverFocus EN-7542H - page 2

    Please read this manual thoroughly before use, and keep i t handy for future reference. ...

  • EverFocus EN-7542H - page 3

    SAFETY INSTRUCTION ……………………………………………… ………………….. 2 ~ 3 CAUTIONS ……………………………………………………………… ...................... .... 4 FCC RF INTERFERENCE STATEM EN T ……………………… ……....... .................... 5 CONNECTING WITH EXTERNAL EQUIPMENT ? ...

  • EverFocus EN-7542H - page 4

    INSTRUCTION MANUA L ………………………………………………………… …………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation opening ...

  • EverFocus EN-7542H - page 5

    bsolete outlet. 10. Protect the power cord from being walked on or pinched p articularly at pl ugs, convenience recept acles and the point where they exit from the apparatus. 1 1. Only use att achment/accessories specified by the manufacturer . 12. Use only with the cart, s tand, tripod, brack et or table specified by the manufacturer or sold with ...

  • EverFocus EN-7542H - page 6

    This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of suffici ent magnitude to constitute a risk of electric shock to persons. This symbol is int ended to alert the user to the presence of import ant operating and maintenance(se rvicing) instructions in the lite ...

  • EverFocus EN-7542H - page 7

     NEVER REMOVE THE BACK COVER Removal of t he back cover should be carried out only by qual ified person nel.  DO NOT USE IN HO S TI LE ENVIRONME NT S To prevent shock or fire hazard, do not expose the unit to rain or moist ure. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of co rrosiv e g ...

  • EverFocus EN-7542H - page 8

    This equipment h as been tested and found to comply w ith the limits for a Cl ass A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful i nterference in a residential inst allation. This equipment generates, uses and can radiate radio frequency energy and, if not installe ...

  • EverFocus EN-7542H - page 9

    A. BACK PANEL CONTROL 1. HDMI IN 2. DVI IN 3. PC VGA IN 4. PC STEREO IN 5. AUDIO O UT 6. COMPONENT IN 7. COMP ONENT AU D IO L/R IN 8. Trigger Input 9. AV 1 IN Composite signal input for AV 1 10. AV 1 OUT Video looping out for AV 1 11. AV 2 IN Composite signal input for AV 2 12. AV 2 OUT Video looping out for AV 2 13. S-VIDEO IN Y/C separated signal ...

  • EverFocus EN-7542H - page 10

    6 ……………………………………………………………………. INSTRUCTION MA NUAL B. REMOTE CONTROLLER 1. POWER ( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources. 3. AUTO Auto g eomet ry adj ust ment in PC Sour c ...

  • EverFocus EN-7542H - page 11

    INSTRUCTION MANUA L ………………………………………………………… …………. 7 C. FRONT KEY CONTROL 1. SOURCE / S E LE C T Select PC or video. Select On Screen Disp lay menu. 2. MENU Activate and exit the On Screen Display. 3 / 4. ▼ / ▲ These buttons allow user to enter the sub-menu of the activated function. The up( ▲ ...

  • EverFocus EN-7542H - page 12

    9. POWER LED The power LED light s with green when the power is turn ed ON. The power is t urned off by press ing the power switch again and the power LED goes Red. 8 ……………………………………………………………………. INSTRUCTION MA NUAL OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video Input) 1) Press the MENU button and ...

  • EverFocus EN-7542H - page 13

    A: CUSTOM MENU (For HDMI, DVI & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Pres s the left(◀) or right( ▶ ) button to adjust the picture setting. 4) Press the MENU button to save. INSTRUCTION MANUA L …? ...

  • EverFocus EN-7542H - page 14

    1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / S ound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down( ▼ ) button to select the Picture ...

  • EverFocus EN-7542H - page 15

    3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button ...

  • EverFocus EN-7542H - page 16

    INSTRUCTION MANUAL …… ………………………………………………………………. 11 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR ...

  • EverFocus EN-7542H - page 17

    1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 12 ……………………………………………… ……………………. INSTRUCTION MANUAL 7. 3D Comb ...

  • EverFocus EN-7542H - page 18

    1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. B. Picture / Sound Menu (For HDMI, DVI & PC Input) 1. Pi ct u re Mode 1) Press the MENU button and then press the up( ▲ ) ...

  • EverFocus EN-7542H - page 19

    5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone. 2) Press the right( ▶) or SOURCE/SELECT butt ...

  • EverFocus EN-7542H - page 20

    3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 14 ……………………………………………… ……………………. INSTRUCTION MANUAL 2-2. Color Tone (Custom) 1) Press the up( ▲ ) or down( ▼ ) button to select ...

  • EverFocus EN-7542H - page 21

    3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color density. 5) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 15 3. Si z e ...

  • EverFocus EN-7542H - page 22

    1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (On ly PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ? ...

  • EverFocus EN-7542H - page 23

    Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. 16 ……………………………………………… ……………………. INSTRUCTION MANUAL C. PIP MENU (Only V ...

  • EverFocus EN-7542H - page 24

    2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 17 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Pres ...

  • EverFocus EN-7542H - page 25

    3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 18 ……………………………………………… ……………………. INSTRUCTION MANUAL 4. Position ...

  • EverFocus EN-7542H - page 26

    1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Sw ap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/SELECT but ...

  • EverFocus EN-7542H - page 27

    INSTRUCTION MANUAL …… ………………………………………………………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option. 4) Press the MENU button to ...

  • EverFocus EN-7542H - page 28

    1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 ……………………………………………… ……………………. INSTRUCTION MANUAL D. SETUP ...

  • EverFocus EN-7542H - page 29

    1) Press the right( ▶ ) or SOURCE/SELECT button 2) Press the right( ▶ ) or SOURCE/SELECT button again. 3) Press SOURCE/SELECT button to execute the reset. Reset : All settings go to the factory initialization. INSTRUCTION MANUAL …… ………………………………………………………………. 21 2. Language ...

  • EverFocus EN-7542H - page 30

    1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the right() or SOURCE/SELECT button 3) P ...

  • EverFocus EN-7542H - page 31

    4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2) Press the right() or S ...

  • EverFocus EN-7542H - page 32

    INSTRUCTION MANUAL …… ………………………………………………………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right() ...

  • EverFocus EN-7542H - page 33

    24 ……………………………………………… ……………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu butto ...

  • EverFocus EN-7542H - page 34

    INSTRUCTION MANUAL …… ………………………………………………………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Ti me. 2) Press left() or right() button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up( ▲ ) or down ...

  • EverFocus EN-7542H - page 35

     N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is hig h(2~5 [V]), Tri gger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is activated. 26 ………………………? ...

  • EverFocus EN-7542H - page 36

    The Type of Imag e 2 : Component, HD MI, DVI or PC. INSTRUCTION MANUAL …… ………………………………………………………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switc hing. 2) Press the right() or SOURCE/SELECT button. 7-1. Auto switching On/Off ...

  • EverFocus EN-7542H - page 37

    1) Press the right() or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the Menu button to save. 28 ……………………………………………… ……………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs en abled ...

  • EverFocus EN-7542H - page 38

    1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff. 2) Press the Menu button to save. INSTRUC ...

  • EverFocus EN-7542H - page 39

    1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. 8. Image Rotation 1) Press the up( ▲ ) / down( ▼ ) button to sel ect the Image Rotation. 2) Press the right( ▶ ) or ENTER button. ※ Image Rotation support Image Rotation p ...

  • EverFocus EN-7542H - page 40

    30 ……………………………………………… ……………………. INSTRUCTION MANUAL 8-1. Image Rotation On/Off 1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff . 3) Press the Menu button to save. 8-2. Image Rotation Min(Ti me control) 1) Press the up( ▲ ) o ...

  • EverFocus EN-7542H - page 41

    INSTRUCTION MANUAL …… ………………………………………………………………. 31 Using the wall mo unt design and the (130x130)x 634 hole pattern on the back panel to install the LCD monitor to the wall . Wall-mount Installation 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixin ...

  • EverFocus EN-7542H - page 42

    32 ……………………………………………… ……………………. INSTRUCTION MANUAL ...

  • EverFocus EN-7542H - page 43

    ▶ PIN ASSI G NMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL (for DDC) 8 BLUE GROUND ▶ ACCESSORY INSTRUCTION MANUAL ………………… …………………………………………………. 33 3. R ...

  • EverFocus EN-7542H - page 44

    This monitor features a power management syst em to “power down” upon receipt of the VESA DPMS(The display power management sign alin g) from a VESA DPMS video ca rd. The VESA DPMS-compliant vid eo card performs this signali ng syste m through n ot sending horizontal, vertical, or sync signal. This monitor enters an ap propriate mode through id ...

  • EverFocus EN-7542H - page 45

    42’’ WXGA 42’’ WUXGA 42 ˝ Diagonal AM-TFT(Active -Matrix) 42 ˝ Diagonal AM-TFT( Active-Matrix) Pixel pitch(mm) : 0.681mm(H) x 0.681mm(V) Pixel pitch( mm) : 0.4845mm(H) x 0.4845mm(V) BRIGHTNESS: 500cd/ ㎡ (Typical) BRIGHTNESS: 500cd/ ㎡ (Typic al) CONTRAST RATIO: 1100:1(Typical) CONTRAST RATIO: 1300:1(Typical) VIEWING ANGLE: 17 8°/178° ...

  • EverFocus EN-7542H - page 46

    INSTRUCTION MANUAL …… ………………………………………………………………. 35 WEEE Symbols ...

  • EverFocus EN-7542H - page 47

    36 ……………………………………………… ……………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Un ion and other European cou ntries with separate col lection sy stems) This marking sho wn on the product or its literature , indicates th ...

  • EverFocus EN-7542H - page 48

    Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Office Room 609,Technology Trade Build ing. Shangdi Info rmation Indu stry Base, Haidian District,Beijin g China Tel: +86-10-62971096 Fax: +86-10-62971423 Europe - Germany Office Alber t-E inst ein- S t ra ...

Produzent EverFocus Kategorie Flat Panel Television

Dokumente, die wir vom Produzenten des Geräts EverFocus EN-7542H erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen EverFocus
- Bedienungsanleitungen EN-7542H
- Produktkarten EverFocus
- Informationsbroschüren
- oder Energieetiketten EverFocus EN-7542H
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung EverFocus EN-7542H.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen EverFocus EN-7542H, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen EverFocus EN-7542H. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts EverFocus EN-7542H ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts EverFocus EN-7542H, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von EverFocus EN-7542H hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von EverFocus EN-7542H verständlich ist.

Eine gänzliche Bedienungsanleitung von EverFocus sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von EverFocus EN-7542H bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von EverFocus EN-7542H befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich EverFocus EN-7542H, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts EverFocus EN-7542H - die uns die ersten Schritte während der Nutzung von EverFocus EN-7542H erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit EverFocus EN-7542H hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von EverFocus EN-7542H im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich EverFocus EN-7542H?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit EverFocus EN-7542H nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit EverFocus EN-7542H hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)