Bedienungsanleitung Epson 1000

18 Seiten 0.16 mb
Download

Zur Seite of 18

Summary
  • Epson 1000 - page 1

    EPSON ® 1000/1500 Setup Guide ...

  • Epson 1000 - page 2

    Contents Setup 1 Unpacking ............................. 1 2 Installing the imaging cartridge ................. 1 3 Loading paper ........................... 4 4 Attaching the power cord ..................... 5 5 Test printing ............................ 5 6 Connecting the printer to the computer ............ 6 7 Testing the computer-to-printer co ...

  • Epson 1000 - page 3

    This booklet is to help you set up your printer and begin printing quickly. It also gives you instructions for routine maintenance. If you need detailed information on printer use or if you have problems printing, see your Reference Guide. Epson is a registered trademark of Seiko Epson Corporation. General Notice: Other product names wed herein are ...

  • Epson 1000 - page 4

    Setup 1 Unpacking 1. Remove the accessories and printer from the shipping carton. 2. Set the printer on a flat, stable surface. 3. Take the packaging off the printer and the other items and store it for future use. Note: The printer weighs about 10 kg (22 lbs) and should be lifted with care. 2 Installing the imaging cartridge e CAUTION: Do not turn ...

  • Epson 1000 - page 5

    2. While holding the imaging cartridge horizontally, gently shake it a few times to distribute the toner evenly. 3. Set the imaging cartridge on a clean, flat surface. Firmly grip the tab on the left side of the imaging cartridge. Pull the clear seal all the way out with firm, even pressure as shown. ...

  • Epson 1000 - page 6

    4. Insert the imaging cartridge into the printer by placing the pins on each side of the cartridge into the grooves inside the printer. Slide it gently into the opening until it stops. 5. Gently press down on the printer cover until it clicks shut. CAUTION: Never transport the printer with the imaging cartridge installed. Setup 3 ...

  • Epson 1000 - page 7

    3 Loading paper 1. 2. 3. 4. 5. Fan a stack of letter-size paper and even up the edges. Open the paper cover located on the top front of the printer. Adjust the paper guides inside the paper bin to match the size of the paper. Load a stack of paper (up to 150 sheets) into the paper bin. Make sure that the paper guides do not press the paper too tigh ...

  • Epson 1000 - page 8

    4 Attaching the power cord 1. Make sure the power switch at the top right of the printer is turned off. 2. Insert the power cord into the back of the printer. Then plug the other end into a properly grounded outlet. 5 Test printing 1. 2. 3. 4. 5. Make sure the imaging cartridge is installed. Turn on the printer. Several messages appear as the print ...

  • Epson 1000 - page 9

    6 Connecting the printer to the computer You can connect up to three computers (two for the ActionLaser 1000) to your printer at the same time. If you are connecting more than one computer, see “Sharing Your Printer” in the Reference Guide. To connect a parallel (factory setting), serial (built-in on the ActionLaser 1500 only), or optional inte ...

  • Epson 1000 - page 10

    Note: If you connect your printer to a serial or optional interface, you my need to change some of the printer’s settings. See the SelecType INTERFACE option in Chapter 4 of the Reference Guide. 7 Testing the computer-to-printer connection To make sure you properly connected your computer to the printer, follow these steps before you start workin ...

  • Epson 1000 - page 11

    8 Setting up your software Choosing the printer emulation Your printer has several resident printer emulations: HP LaserJet III (3/P/Si), Epson LQ, Epson FX, and Epson GL/2 for the ActionLaser 1500; HP LaserJet IIP (LJ-2P), Epson LQ, and Epson FX for the ActionLaser 1000. The HP emulation is the default setting. because it gives you the fullest ran ...

  • Epson 1000 - page 12

    If none of the above printers is listed, select any printer model that uses the HP Printer Command Language (PCL). For the GL/2 emulation on the ActionLaser 1500, you can print graphic data using the HP GL/2 commands or some HP GL commands. See Appendix B in the Reference Guide. For the LQ or FX emulations, select one of the following: LQ-2500 LQ-1 ...

  • Epson 1000 - page 13

    10 setup ...

  • Epson 1000 - page 14

    Maintenance Replacing the Imaging cartridge The imaging cartridge prints up to 6,000 pages depending upon the complexity of your print jobs. If your printed images become faint, enter the SelecType Level 2 TONER option to find out approximately how much toner remains in the imaging cartridge. Simply count the asterisks between the E (empty) and the ...

  • Epson 1000 - page 15

    2. Gently open the printer cover and remove the imaging cartridge by pulling it toward you. 3. Dispose of the imaging cartridge with nonburnable items. e CAUTION: Do not turn the imaging cartridge upside down. Do not expose the imaging cartridge to light any longer than necessary. 4. While holding the new imaging cartridge horizontally, gently shak ...

  • Epson 1000 - page 16

    5. Set the imaging cartridge on a clean, flat surface. Firmly grip the tab on the left side of the imaging cartridge. Pull the clear seal all the way out with firm, even pressure as shown. 6. Insert the imaging cartridge into the printer by placing the pins on each side of the cartridge into the grooves inside the printer. Slide it gently into the ...

  • Epson 1000 - page 17

    7. Next you reset the TONER setting. Three messages flash in rotation on the display: NEW CARTRIDGE? YES, PRESS RESET NO, PRESS CONTINUE. 8. Press RESET to change the TONER setting to full. 9. Gently press down on the printer cover until it clicks shut. Please note: If you replace the cartridge when more than 20% toner is left, the three rotating m ...

  • Epson 1000 - page 18

    Feed or paper jam When the printer stops printing and the FE E D JAY or PAPER JAM message appears, follow these steps: 1. Open the paper cover. Carefully remove all the paper in the paper bin along with any sheets that have fed part way into the printer. If the paper is caught in the paper ejection area, gently pull it out. 2. If the paper tears wh ...

Produzent Epson Kategorie Printer

Dokumente, die wir vom Produzenten des Geräts Epson 1000 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Epson
- Bedienungsanleitungen 1000
- Produktkarten Epson
- Informationsbroschüren
- oder Energieetiketten Epson 1000
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Epson 1000.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Epson 1000, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Epson 1000. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Epson 1000 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Epson 1000, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Epson 1000 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Epson 1000 verständlich ist.

Eine gänzliche Bedienungsanleitung von Epson sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Epson 1000 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Epson 1000 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Epson 1000, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Epson 1000 - die uns die ersten Schritte während der Nutzung von Epson 1000 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Epson 1000 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Epson 1000 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Epson 1000?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Epson 1000 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Epson 1000 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)