-
Brother MFC-7320 - page 1
USER’S GUIDE MFC-7320 MFC-7440N MFC-7840W Version A UK/IRE/SAF ...
-
Brother MFC-7320 - page 2
If you need to cal l Customer Service Please complete the following information for future reference: Model Number: MFC-7320, MFC-7440N and MFC-7840W (Circle your model number) Serial Number: 1 Da te of Pu rc ha se : Pl ac e o f P ur ch as e: 1 The serial number is on the back of the un it. Retain this User’s Guide with your sal es receipt as a p ...
-
Brother MFC-7320 - page 3
i Approval Information and Compilation and Publication Notice THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother ad vises that this pr oduct may not function correc tly in a country other than whe re it was originally purc hased, and d oes not offer a ny warranty ...
-
Brother MFC-7320 - page 4
ii EC Declaration of Confor mity under the R & TTE Directive ...
-
Brother MFC-7320 - page 5
iii Table of Contents Section I General 1 General information 2 Using the documentation ................... ...... ....... ................... ................... ................. 2 Symbols and conventions used in the do cumentation ....................... ............. 2 Accessing the Software User’s Guide and Network User’s Guide (MFC-7440N ...
-
Brother MFC-7320 - page 6
iv Dial pad restriction ........................ ................ ................... ................... ........... 29 One Touch restriction ...... ................... ................... .................... ................... . 29 Speed Dial restriction ......... ................... .................... ................... ................. 29 ...
-
Brother MFC-7320 - page 7
v 7 Telephone and external devices 44 Telephone line services ........ ................... .................... ................... ................... .. 44 Caller ID ................ .................... ................... ................... .................... ........... 44 Setting the telephone line type ............. ...................... ...
-
Brother MFC-7320 - page 8
vi Delayed polling ......... .................... ................ ................... ................... ........... 62 Sequential polling ............ ................... ................... .................... ................... . 63 Polled transmit ............... .................... ................... ................... ................. ...
-
Brother MFC-7320 - page 9
vii Safety precautions .......... ...................... ................. ................... ................... .. 81 IEC60825-1+A2:2001 Specification ............ ....................... ...................... ..... 84 Disconnect device .......................... ................... .................... ................... ..... 84 Wiring infor ...
-
Brother MFC-7320 - page 10
viii Copy ............... ................... ................. ................... ................... .................... ..... 152 Scan ................... .................... ................ ................... .................... ................... .. 153 Print ................ ................... ................. ................... ... ...
-
Brother MFC-7320 - page 11
Section I General I General information 2 Loading paper and documents 9 General setup 21 Security features 24 ...
-
Brother MFC-7320 - page 12
2 1 Using the documentation 1 Thank you for buyi ng a Brother machine! Reading the documentation will help you make the most of your machine. Symbols and conventions used in the documentation 1 The following symbols and conventions ar e used throughout the docu mentation. Accessing the Software User’s Guide and Network User’s Guide (MFC-7440N a ...
-
Brother MFC-7320 - page 13
General information 3 1 Viewing documentation 1 Viewing documentation (Windows ® ) 1 To view the documentatio n, from the Start menu, point to Brother , MFC-XXXX (where XXXX is your m odel name) fr om the progr am group, and then click User’s Guides in HTML format . If you have not installe d the software, you can find the documentation by follo ...
-
Brother MFC-7320 - page 14
Chapter 1 4 How to find scanning instru ctions 1 There are sever al ways you can scan documents. You can find the instructio ns as follows: Software User's Guide: 1 Scanning a document usin g the TWAIN driver in Chapter 2 Scanning a document usin g the WIA driver (For Windows ® XP/Windows Vista ® only) in Chapter 2 Using ControlC ...
-
Brother MFC-7320 - page 15
General information 5 1 How to find scanning instru ctions 1 There are sever al ways you can scan documents. You can find the instructions as follows: Software User's Guide: 1 Scanning in Chapter 9 Using ControlCenter2 in Chapter 10 Network Scanning in Chapte r 11 (MFC- 7440N and MFC-7840W on ly) Presto! ® PageManager ® User&apos ...
-
Brother MFC-7320 - page 16
Chapter 1 6 Control panel overview 1 MFC-7320 MFC-7440N and MFC-78 40W have the same keys. 5 1 2 6 3 7 4 8 ...
-
Brother MFC-7320 - page 17
General information 7 1 ...
-
Brother MFC-7320 - page 18
Chapter 1 8 1 Fax and telepho ne keys: Tel/R This key is used to have a telephone conversation after picking up the external handset du ring the F/T pseudo-ring. When connected to a PBX, you can use this key to gain access to an outside line, to recall an operator, or to transfer a call to another extension. Resolution Sets the resolution when send ...
-
Brother MFC-7320 - page 19
9 2 2 Loading paper and print media 2 The machine can feed paper fro m the standard paper tray or manual feed slot. When you put paper into the pap er tray, note the following: If your applicatio n software supports paper size selection on the print menu, you can select it through the softwar e. If your application softwar e does not support it ...
-
Brother MFC-7320 - page 20
Chapter 2 10 c Put paper in the tray, and make sur e that the paper is below the maximum pa per mark (1) . The side to be printed on must be face down. CAUTION To prevent da mage to your machin e caused by paper misfeeding , make sure the paper guides touch t he side s of the paper. d Put the paper tray firmly back in the machine. Make sure t hat i ...
-
Brother MFC-7320 - page 21
Loading paper and do cuments 11 2 c Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. d Using both hands, pu t one sheet of paper or one transparen cy in the manual feed slot until the front ed ge touches the pape r feed roller. When you feel the machine pull in the paper, let go. Printin ...
-
Brother MFC-7320 - page 22
Chapter 2 12 c Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. d Using both hands, pu t one sheet of paper or one envelop e in the manual feed slot until the front edge of the paper or envelope touch es the paper feed roller. When you feel the ma chine pull in the paper, let go. Note ? ...
-
Brother MFC-7320 - page 23
Loading paper and do cuments 13 2 Unprintable area 2 Unprintable area for faxes and copies 2 The printable area of your machin e begins at approximately 3 mm from the top and bottom and 2 mm from both sides of the paper. 13 m m 22 m m Note (For copies) The unprin table area shown above is for a single copy or a 1 in 1 copy using A4 size pa per. The ...
-
Brother MFC-7320 - page 24
Chapter 2 14 Acceptable paper and other print media 2 Print quality may vary according to the type of paper you are using . You can use the following types of print media: plain paper, bond paper, recycled paper, transparencies, labels or envelopes. For best results, follow the instructions below: Use paper made for plain pa per copying. Us ...
-
Brother MFC-7320 - page 25
Loading paper and do cuments 15 2 Type and size of paper 2 The machine loads p aper from the installed standard paper tray or manual feed slot. Standard paper tray 2 Since the standard paper tray is a universal type, you can use any of the p aper sizes (one paper type and size at a time) listed in the table in Paper ca pacity of the paper trays on ...
-
Brother MFC-7320 - page 26
Chapter 2 16 Handling and using special paper 2 The machine is designed to wo rk well with most types of xerographic and bond paper. However, some paper variables may have an effect on print quality or handling reliability. Always test samples of paper before purchasing to ensure desir able performance. Store pap er in its original packaging and ke ...
-
Brother MFC-7320 - page 27
Loading paper and do cuments 17 2 Envelopes 2 Most envelopes will be suitable for your machine. However, some envelopes may have feed and print-quality pro blems because of the way they have been made. A suitable envelope should have edges with straight, well-crease d folds and the leading edge should not be thicker than two sheets of paper. The en ...
-
Brother MFC-7320 - page 28
Chapter 2 18 • with sealing flaps that have not bee n folded at purchase • with sealing flaps as shown in figure below • with each side fold ed as shown in figure below If you use any of the types of envelopes listed above, they m ay damage your machine. This damage is no t covered under any Brother warranty or service agreement. Occasionally ...
-
Brother MFC-7320 - page 29
Loading paper and do cuments 19 2 Loading documents 2 Using the automatic document feeder (ADF) 2 The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 80 g/m 2 paper and always fan the pag es before putting them in the ADF. Recommended environment 2 CAUTION DO NOT leave thick documents on the scanner glass. If you do this ...
-
Brother MFC-7320 - page 30
Chapter 2 20 Using the scanner glass 2 You can use the sca nner gl ass to fax, copy or scan pages of a book or one page at a time. Documents can be up to 215.9 mm wid e and 297 mm long. Note To use the scanner glass, the ADF must be empty. a Lift the document cover. b Using the document gu idelines on the left, centre the document face do wn on the ...
-
Brother MFC-7320 - page 31
21 3 3 Mode timer 3 The machine has three mode keys on the control panel: Fax , Scan , and Copy . You can set how much time the machine takes after the last Copy or Scan opera tion to return to Fax mode. If you cho ose Off , the machine will stay in th e mode you used last. (MFC-7840W only) Also, this setting sets the time the machine will change f ...
-
Brother MFC-7320 - page 32
Chapter 3 22 Volume settings 3 Ring volume 3 You can choose a ring volume level from a range of settings, from High to Off . While in Fax mode press or to adjust the volume level. The LCD will show the current setting, and each key press will change the volume to the next level. The machine will keep the ne w setting until you change it. You can al ...
-
Brother MFC-7320 - page 33
General setup 23 3 Automatic daylight savings time 3 You can set the machine to change automatically for Day light Savings Time. It will set itself fo rward one hour in the Spring, and back one hour in the Autumn. a Press Menu 1 , 5 . b Press a or b to choose On or Off . Press OK . c Press Stop/Exit . Ecology features 3 Toner Save 3 You can save to ...
-
Brother MFC-7320 - page 34
24 4 Security 4 You can set up your machine with multiple levels of security using Setting Lock and TX Lock (MFC-7320 a nd MFC-7440N only) or Secure Function Lock (MFC-7840W only). You will not be able to continue to schedule Delayed Faxes or Pollin g jobs. However, any pre-scheduled Delayed Faxes will be sent even if you turn on TX Lock or Secure ...
-
Brother MFC-7320 - page 35
Security featur es 25 4 Secure Function Lock (MFC-7840W only) 4 Secure Function Lock lets you restrict Public access to certain machine functions (Fax Tx, Fax Rx, Copy, Scan and Print 1 ). This feature also prevents users from changing the Default settings of the machin e by limiting access to the Menu settings. Disabling at least one function is r ...
-
Brother MFC-7320 - page 36
Chapter 4 26 Setting up the Public user 4 You can set up the Pu blic user. Public users do not need to ente r a password. Note You must disable at le ast one function to turn on Secu re Func tion Lock for Public user. a Press Menu , 1 , 8 , 1 . b Press a or b to choose Setup User . Press OK . c Enter the administrator password. Press OK . d Press a ...
-
Brother MFC-7320 - page 37
Security featur es 27 4 Turning Secure Function Lock on/off 4 If you enter the wrong pa ssword when following the instructio ns below, the LCD will show Wrong Password . Re-enter the correct passw ord. Turning Secure Function Lock on 4 a Press Menu , 1 , 8 , 1 . b Press a or b to choose Lock Off i On . Press OK . c Enter your four-digit administrat ...
-
Brother MFC-7320 - page 38
Chapter 4 28 Setting lock 4 Setting Lock lets you set a password to stop other people from accidentally changing your machine settings. Make a careful note of your password. If you forget it, please call your Brother dealer. While Setting Lock is On , you cannot change the following settings without a password: Date/Time Statio n ID Qui ...
-
Brother MFC-7320 - page 39
Security featur es 29 4 Restricting dialling 4 This featur e is to prevent user s from sending a fax or call to a wrong number by mistake.You can set the machine to restr ict dialling by using the dial pad, One Touch and Speed Dial. If you choose Off , the machine does not restrict the dialling method. If you choose Enter # twice , the machine will ...
-
Brother MFC-7320 - page 40
Chapter 4 30 ...
-
Brother MFC-7320 - page 41
Section II Fax II Sending a fax 32 Receiving a fax 39 Telephone and external devices 44 Dialling and storing numbers 51 Remote fax options 56 Polling 62 Printing reports 65 ...
-
Brother MFC-7320 - page 42
32 5 How to fax 5 Entering fax mode 5 To enter fax mode press ( Fax ), and the key will glow green. Sending a fax from the ADF 5 Using the ADF to send your faxes is the easiest w ay. To cancel a f ax in progress press Stop/Exit . a Make sure you are in Fax mode . b Place your document face up in the ADF. c Dial the fax number. (See How to dial on p ...
-
Brother MFC-7320 - page 43
Sending a fax 33 5 Cancelling a fax in progress 5 Press Stop/Exit to can cel th e fax. If you press Stop/Exit while the machine is diall ing or sending, the LCD will show 1.Clear 2.Exit , press 1 to cancel the fax. Broadcasting 5 Broadcasting lets you send the same fax message to more than one fax number . You can include Groups, One Touch, Speed D ...
-
Brother MFC-7320 - page 44
Chapter 5 34 Additional sending operations 5 Sending faxes using multiple settings 5 Before you send a fax, you can chan ge any combination of th ese settings: contr ast, resolution, overse as mode, delayed fax tim er, polling transmission, real time tran smission or cover page settings. a Make sure you are in Fax mode . After each setting is accep ...
-
Brother MFC-7320 - page 45
Sending a fax 35 5 f Enter two digits to show the number of pages you are sending. Press OK . For example, enter 0 , 2 for 2 pages or 0 , 0 to leave the number of pages blan k. If you make a mistak e, press d or Clear/Back to back up an d re-enter the number of pages. Send a cover page for all faxes 5 You can set the machine to send a cover page wh ...
-
Brother MFC-7320 - page 46
Chapter 5 36 Changing fax resolution 5 The qualit y of a fax can be improved by changing the fax resolu tion. Resolution can be changed for the next fax or for all faxes. To change the fax resolution for the next fax 5 a Make sure you are in Fax mode . b Load your documen t. c Press Resolution , then a or b to choose the resolution. Press OK . To c ...
-
Brother MFC-7320 - page 47
Sending a fax 37 5 Sending in real time for all faxes 5 a Make sure you are in Fax mode . b Press Menu , 2 , 2 , 5 . c Press a or b to choose On . Press OK . Sending in real time for the next fax only 5 a Make sure you are in Fax mode . b Press Menu , 2 , 2 , 5 . c Press a or b to choose Next Fax:On . Press OK . Not sending in real time for the nex ...
-
Brother MFC-7320 - page 48
Chapter 5 38 Checking and cancelling waiting jobs 5 Check which jobs are still waiting in the memory to be sent. If there are no jobs, the LCD will show No Jobs Waiting . You can cancel a fax job that is stored and waiting in the memory. a Press Menu , 2 , 7 . The number of jobs still to be sent will be displayed. b Do one of the following: Pre ...
-
Brother MFC-7320 - page 49
39 6 6 Receive modes 6 You must choose a receive mode de pending on th e externa l devices and telephone ser vices you have on your line. The diagrams below will help you choose the correct mo de. (For more detailed information about the rece ive modes, see Using receive modes on page 40.) Choosing the receive mode 6 To set the receive mode fo llow ...
-
Brother MFC-7320 - page 50
Chapter 6 40 Using receive modes 6 Some receive modes answer au tomatically ( Fax Only and Fax/Tel ). You may want to change the ring delay before using these modes. (See Ring delay on page 41.) Fax Only 6 Fax Only mode will automatically answer every call as a fax. Fax/Tel 6 Fax/Tel mode helps you automatically manage incoming calls, by recognisin ...
-
Brother MFC-7320 - page 51
Receiving a fax 41 6 Receive mode settings 6 Ring delay 6 The ring delay sets the number of times the machine rings before it answers in Fax Only and Fax/Tel modes. If you have external or extension telep hones on the same line as the m achine choose the maximum number of rings. (Se e Oper ation from extension telepho nes on page 48 and Fax Detect ...
-
Brother MFC-7320 - page 52
Chapter 6 42 Setting the print density 6 You can adjust the print density to make your printed pages darker or lighter. a Make sure you are in Fax mode . b Press Menu , 2 , 1 , 7 . c Press a to make the print darker. Or, press b to make the print lighter. Press OK . d Press Stop/Exit . Additional receiving operations 6 Printing a reduced incoming f ...
-
Brother MFC-7320 - page 53
Receiving a fax 43 6 Receiving faxe s into memory 6 As soon as the paper tray becomes empty during fax reception, the screen will display No Paper , asking you to put paper in the paper tray. (See Loading pa per and print media on page 9.) If you are un able to put paper in the paper tray the following will happen: If Memory Receive is On : 6 The m ...
-
Brother MFC-7320 - page 54
44 7 Telephone line services 7 Caller ID 7 The Caller ID featur e lets you use the Caller ID subscriber service offered by m any local telephone companies. Call yo ur telephone company for details. This ser vice shows the telephone number, or n ame if it is available, of your caller as the line rings. After a few rings, the LCD will show the teleph ...
-
Brother MFC-7320 - page 55
Telephone and external device s 45 7 c Press Start . d After printing has finished, press Stop/Exit . Setting the telephone line type 7 If you are connecting the machine to a line that features a PBX or ISDN to send and receive faxes, it is necessary to change the Telephone Line Type accordingl y by completing th e following step s. If you are usin ...
-
Brother MFC-7320 - page 56
Chapter 7 46 BT call sign (U.K. only) 7 The BT Call Sign subscrib er service is a way to have a sepa rate number for your machine, it allows you to have at least two separate telephone numbers on one phone line. Each phone number has its o wn distinctive ringing pattern. You can set up your machine so that it only responds to the second number. Whe ...
-
Brother MFC-7320 - page 57
Telephone and external device s 47 7 a Set your external TA D to one or two rings. (The machine’s Ring Delay setting does not apply.) b Record the outgoing message on your external TAD. c Set the TAD to answer calls. d Set the Receive Mode to External TAD . (See Receive modes on page 39.) Recording an outgoing message (OGM) 7 a Record 5 seconds o ...
-
Brother MFC-7320 - page 58
Chapter 7 48 External and extension telephones 7 Note You need to turn the Remote Cod es setting to on to use the Remote Activation code l 51 and Remote Deactivation code #51. (See Using remote codes on page 50.) Operation from extension telephones 7 If you answer a fax call on an extension telephone, or an extern al telephone that is correctly con ...
-
Brother MFC-7320 - page 59
Telephone and external device s 49 7 Using extension telephones (U.K. only) 7 Your premises may already be wired with parallel extension teleph ones (those connected to sockets in other ro oms in the building), or per haps you inte nd to add extension telephones to your line. While the simplest arrangement is a parallel connection, there are so me ...
-
Brother MFC-7320 - page 60
Chapter 7 50 Using a non-Brother cordless external handset 7 If your non-Brother cord less telephone is connected to the telephon e line cord (see page 48 ) and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the machine answer first, you will have to go to the machine so you can pr ...
-
Brother MFC-7320 - page 61
51 8 8 How to dial 8 You can dial in any of the following ways. Manual dialling 8 Use the dial pad to enter all the dig its of the telephone or fax number. One touch dialling 8 Press the One Touch key that stores the number you want to call. (See Storing one touch d ial numbers on page 52.) To dial One Touch numbers 5 to 8, hold down Shift as you p ...
-
Brother MFC-7320 - page 62
Chapter 8 52 • If the LCD shows No Contact Found when you ente r the firs t few letters of the name, it means th at a name for th e letter is not stored. Fax redial 8 If you are sending a fax automatically and the line is busy, the mach ine will automatically redial up to three times at five minute intervals. If you are sending a fax manually and ...
-
Brother MFC-7320 - page 63
Dialling and storing numbers 53 8 c Enter the number (up to 20 characters). Press OK . d Do one of the following: Enter the name using the dial pad (up to 15 characters). Press OK . Press OK to store the number without a name. e Do one of the following: If you want to save a fax resolution along with the number, Press a or b to choose S ...
-
Brother MFC-7320 - page 64
Chapter 8 54 c Press d or c to position the curs or under the character you want to change, and then press Clear/Back to delete it. Repeat for each character you want to delete. Setting up groups for broadcasting 8 If you often want to send the same fax message to many fax numbers you can set up a group. Groups are stored on a One Touch key or a Sp ...
-
Brother MFC-7320 - page 65
Dialling and storing numbers 55 8 Combining quick dial numbers 8 You can combine more than one Quick Dial number when you dial. This feature may be useful if you need to di al an access code for a cheaper rate from anothe r long distance carrier. For example, you might have stored ‘555’ on Speed Dial #003 and ‘7000’ on Sp eed Dial #002. You ...
-
Brother MFC-7320 - page 66
56 9 Remote fax op tions le t you receive faxes while you are away from the machine. You can us e only one remote fax option at a time. Fax forwarding 9 The fax forwarding feature lets yo u automatically forward your received fa xes to another machine. If you choose Backup Prin t On, the machine will al so print the fax. a Press Menu , 2 , 5 , 1 . ...
-
Brother MFC-7320 - page 67
Remote fax option s 57 9 PC fax receive 9 If you turn on the PC Fax Receive featur e your machine will store received faxes in memory and send them to your PC automatically. You can the n use your PC to view and store these faxes. Even if you have turned off your PC (at night or on the weekend, for example), your machine will receive and store your ...
-
Brother MFC-7320 - page 68
Chapter 9 58 Changing remote fax options 9 If received faxes are left in your machine’s memory when you chan ge to another remote fax option, the LCD will ask you the following message: Erase All Doc? 1.Yes 2.No or Print All Fax? 1.Yes 2.No If you press 1 , faxes in the memory will be erased or printed before the setting changes. If a backup ...
-
Brother MFC-7320 - page 69
Remote fax option s 59 9 Remote retrieval 9 The remote retrie val feature lets you retrieve your stored fax messages when you are not at the machine. You can call your machine from any touch tone phon e or fax machine, then use the Remote Access Co de to retrieve your messages. Setting a remo te access code 9 The remote access code lets you access ...
-
Brother MFC-7320 - page 70
Chapter 9 60 Retrieving fax messages 9 a Dial your fax number from a telephone or another fax machine using touch tone. b When your machine answers, immediately enter you r remote access code (3 digits followed by l ). If you hear one long beep, you have messages. c When you hear two short beep s, use the dial pad to press 9 6 2 . d Wait for a long ...
-
Brother MFC-7320 - page 71
Remote fax option s 61 9 Remote fax commands 9 Follow the commands below to a ccess features when you ar e away from the machine. When you call the machine and enter your Rem ote Access Code (3 digits followed by l ), the system will give two short beeps and you must enter a remote command. Remote commands Operation details 95 Change the fax forwar ...
-
Brother MFC-7320 - page 72
62 10 Polling lets you set up y our machine so other people can receive faxes from you, but they pay for the call. It also lets you call somebody else’s fax m achine and receive a fax from it, so you pay for the call. The polling feature needs to be set up on both machines for this to work. Not all fax ma chines support polling. Polling receive 1 ...
-
Brother MFC-7320 - page 73
Polling 63 10 Sequential polling 10 Sequential polling lets you request documents from several fax machines in one operation. a Make sure you are in Fax mode . b Press Menu , 2 , 1 , 8 . c Press a or b to choose Standard , Secure or Timer . Press OK . d Choose one of the options below. If you choose Standard go to e . If you choose Secure , ...
-
Brother MFC-7320 - page 74
Chapter 10 64 Note The document will be stored and can be retrieved from any other fa x machine until you delete the fax from mem ory. To delete the fax from memory, press Menu , 2 , 7 . (See Checking and cancelling waiting jobs on page 38.) Setup for polled transmit with a secure code 10 Secure Polling le ts you restrict who can get the documents ...
-
Brother MFC-7320 - page 75
65 11 11 Fax reports 11 Some fax reports (transmission verification and fax journal) ca n be printed automatically and manually. Transmission verification report 11 You can use the transmission report as proof that you sent a fax. This repo rt lists the time and date of transmission and wh ether the transmission was su ccessful (s hown as “OK”) ...
-
Brother MFC-7320 - page 76
Chapter 11 66 Reports 11 The following rep orts are available: 1 XMIT Verify Displays the Transmission Verification Report for your last outg oing 200 faxes and prints the las t report. 2 Help List Prints a list of commonly used functions to help you program your machine. 3 Tel Index List Prints a list of names and numbers stor ed in the One T ouch ...
-
Brother MFC-7320 - page 77
Section III Copy III Making copies 68 ...
-
Brother MFC-7320 - page 78
68 12 How to copy 12 Entering copy mode 12 Press ( Copy ) to enter Copy mode. 1 Stack/Sort 2 Copy ratio and co py layout 3 Contrast 4Q u a l i t y 5 Number of cop ies Making a single copy 12 a Make sure you are in Copy mode . b Load your documen t. c Press Start . Making multiple copies 12 a Make sure you ar e in Copy mode . b Load your docume nt. ...
-
Brother MFC-7320 - page 79
Making copi es 69 12 Copy options (temporary settings) 12 When you want to quickly change the cop y settings temporarily for the next copy, us e the temporary Copy keys. You can use different combinations. The machine returns to its default set tings one minute after copying , unless you have set the Mode Timer to 30 seconds or less. (See Mode time ...
-
Brother MFC-7320 - page 80
Chapter 12 70 Using the Options key 12 Use the Options key to quickly set the following copy settin gs temporarily for the next copy. Press Menu selections Options Page Press a or b , then press OK Press a or b , then press OK Quality Auto * Text Photo 71 Stack/Sort (appears when the document is in the ADF) Stack * Sort 71 Contrast b - nnnno + a b ...
-
Brother MFC-7320 - page 81
Making copi es 71 12 Improving copy quality 12 You can ch oose from a ra nge of quality settings. The default setting is Auto . Auto Auto is the recommended mode for ordinary printouts. Su itable for documen ts that contain both text and photo graphs. Text Suitable for docu ments containing on ly text. Photo Suitable for c opying photog ...
-
Brother MFC-7320 - page 82
Chapter 12 72 Adjusting contrast 12 Contrast 12 Adjust the contrast to help an image loo k sharper and more vivid. To temporarily cha nge the contrast settin g, follow the steps below: a Make sure you are in Copy mode . b Load your documen t. c Use the dial pad to enter th e number of copies (up to 99). d Press Options . Press a or b to choose Cont ...
-
Brother MFC-7320 - page 83
Making copi es 73 12 Repeat h and i for each page of the layout. j After all the pages have been scann ed, press 2 in h to finish. If you are copying from the ADF: 12 Insert your document face up in the direction shown below: 2 in 1 ( P) 2 in 1 ( L) 4 in 1 ( P) 4 in 1 ( L) If you are copying from the scanner glass: 12 Insert your do ...
-
Brother MFC-7320 - page 84
Chapter 12 74 ...
-
Brother MFC-7320 - page 85
Section IV Software IV Software and Network (MFC-7440N and MFC-7840W only) features 76 ...
-
Brother MFC-7320 - page 86
76 13 The User’s Guide on the CD-ROM includes the Software User’s Guide and Network User’s Guide (MFC-7440N and MFC- 7840W only) for features availa ble when connected to a computer (for exam ple, printing and scanning). These guides ha ve easy to use links that, when clicked, will take you directly to a particular section. You can find infor ...
-
Brother MFC-7320 - page 87
Software and Network (MFC-7440N and MFC-7840W on ly) features 77 13 c Click the heading you would like to view from the list at the left of the window. For Macintosh ® 13 a Make sure your Macintosh ® is turned on. Insert the Brother CD-ROM into your CD-ROM drive. b Double-click the Documentation icon. c Double-click your language folder, and then ...
-
Brother MFC-7320 - page 88
Chapter 13 78 ...
-
Brother MFC-7320 - page 89
Section V Appendixes V Safety and legal 80 Troubleshooting and routine maintenance 89 Menu and features 130 Specifications 147 Glossary 163 ...
-
Brother MFC-7320 - page 90
80 A Choosing a location A Place your machine on a flat, stable surface th at is free of vibration. Put the machine near a telephone socket and a sta ndard, grounded electr ical socket. Choose a location where the temperat ure remains b etween 10 ° C and 32.5 ° C and the humidity is betwe en 20% to 80% (without condensation). Make sure c able ...
-
Brother MFC-7320 - page 91
Safety and legal 81 A Important information A Safety precautions A Please read these instructions before attempti ng any main tenance, and keep them for later reference. When usin g your telephone equipme nt, follow basic safety precautions to reduce the risk of fire, electric shoc k or personal in jury. DO NOT use this pr oduct near wa ter, or ...
-
Brother MFC-7320 - page 92
82 WARNING Before cleaning the inside of the machine, first unplug the telephon e line cord, and then the power cord from the el ectrical socket. DO NOT handle the plug with wet hands. Doing this might ca use an electr ical shock. Always make sure the plug is fully inserted. After you have just used the machine, some internal parts of the ma chine ...
-
Brother MFC-7320 - page 93
Safety and legal 83 A Note The fuser unit is marked with a caution label. Please DO NOT remove or damage the label. DO NOT use a vacuum cleaner to clean up sca ttered toner. Doing this might cause the toner dust to ignit e inside the vacu um cleaner, p ote ntially starting a fire. Pl ea se carefully clean the toner dust with a dry, lint-free cloth ...
-
Brother MFC-7320 - page 94
84 IEC60825-1+A2:2001 Specification A This machine is a Class 1 laser product as de fined in IEC60825-1+A2:2001 specificat ions. The label shown below is attached in coun tries where required . Internal laser radiation A Wave length: 780 - 800 nm Output: 10 mW max. Laser Class: Class 3B WARNING Use of cont rols, adjustmen ts or performa nce of proc ...
-
Brother MFC-7320 - page 95
Safety and legal 85 A LAN connection (MFC-7440 N and MFC-7840W only) A CAUTION DO NOT connect this product to a LAN connection that is subject to over-voltages. Radio interference A This product complies with EN55022 (CISPR Pu blication 2 2)/Class B. When connecting the machine to a computer, ensure that you use the following interface cab les. A U ...
-
Brother MFC-7320 - page 96
86 International ENERGY STAR ® Compliance Statement A The purpos e of the Internationa l ENERGY STAR ® Program is to promote the development and popularization of energy-eff icient o ffice equipment. As an ENERGY STAR ® Partner, Brother Industr ies, Ltd. ha s determined that this pr oduct meets the ENERGY STAR ® guidelin es for energy efficien ...
-
Brother MFC-7320 - page 97
Safety and legal 87 A 11 The power cord, including extensions should be no longer than 5 metres. DO NOT share the same power circuit with other high powered appliances, such as an air conditioner, copier, shr edder or similar devices. If you ca nnot avoid using the printer with these appliances, we recommend that yo u use a high-frequency no ise fi ...
-
Brother MFC-7320 - page 98
88 Trademarks A The Brother logo is a registered trademark of Bro ther Industries, Ltd. Brother is a registered trademark of Brother Industri es, Ltd. Multi-Func tion Link is a re gistered tradem ark of Brothe r International Corporation. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and ...
-
Brother MFC-7320 - page 99
89 B B Troubleshooting B If you think there is a problem with your ma chine, ch eck the chart below and follow the troubleshooting tips. Most problem s can be eas ily resolved by y our self. If you need additional he lp, the Brother Solutions Center offers the latest FAQs and troublesho oting tips. Visit us at http://solutions.brother .com/ . If yo ...
-
Brother MFC-7320 - page 100
90 The machine does not answer when called. Make sure the machine is in the correct receive mode for your setup . (See Receiving a fax on page 39.) Check for a dial tone. If possible, call your machine to hear it answer. If there is still no answer, ch eck the telephone line cord connection. If you do not hear ringing when you call your machine, as ...
-
Brother MFC-7320 - page 101
Troubleshooting an d routine maintenance 91 B Menu access difficulties Difficulties Suggestions The machine beeps when you try to access the Setup Receive and Setup Send menus. If the Fax key is not illuminated, press it to turn on Fax mode. The Setup Receive setting ( Menu , 2 , 1 ) and Setup Send setting ( Menu , 2 , 2 ) are available only when t ...
-
Brother MFC-7320 - page 102
92 The headers or footers appear when the document displays on the screen but they do not show up when it is printed. There is an unprintable area on the top and bottom of the page. Adjust the top and bottom margins in your document to allow for this. Scanning difficulties Difficulties Sugg estions TWAIN errors appear while scanning. Make sure that ...
-
Brother MFC-7320 - page 103
Troubleshooting an d routine maintenance 93 B Print quality difficulties Difficulties Suggestions Printed pages are curled. Low quality thin or thick paper or not printing on the recommended side of the paper could cause this problem. Try turning over the stack of paper in the paper tray. Make sure that you choose the Paper Type that suits ...
-
Brother MFC-7320 - page 104
94 The network scanning feature does not work. The network PC Fax Receive feature does not work. The network printing feature does not work. (For Windows ® only) The firewall setting on your PC may be rejecting the necessary network connection. Follow t he instruct ions below to configure Windows ® Firewall. If you are using other perso nal firew ...
-
Brother MFC-7320 - page 105
Troubleshooting an d routine maintenance 95 B The network scanning feature does not work. The network PC Fax Receive feature does not work. The network printing feature does not work. (continued) For Windows Vista ® users: a Click the Start button, Control Panel , Network and Internet , Win dows Firewal l and click Change settings . b When the Use ...
-
Brother MFC-7320 - page 106
96 Improving the print quality B Examples of poor print quality Recommendation White lines across the page Make sure that you use paper tha t meets our specifications. A rough surfaced paper or thick print media can cause the problem. (See Acceptable paper and other print media on page 14.) Make sure that you choose the ap propriate medi a ...
-
Brother MFC-7320 - page 107
Troubleshooting an d routine maintenance 97 B Page skewed Make sure that the paper or other print medi a is loaded correctly in the paper tray a nd that the guides are not too tight or too loose against the paper stack. Set the paper guides correctly. (See Loading pape r in the paper tray on page 9.) The paper tray may be too full. ...
-
Brother MFC-7320 - page 108
98 Curled or wavy Check the paper type and quali ty. High temperatures and high humidity will cause paper to curl. If you do not use the machi ne often, the paper may have been in the paper tray too l ong. Turn over the stack of paper in the paper tray. Also, fan the pa per stack and then rotate the pap er 180° in the paper tray. White Spo ...
-
Brother MFC-7320 - page 109
Troubleshooting an d routine maintenance 99 B Faint Check the machine’s enviro nment. Conditions such as humidity, high temperatures, and so on, may cause this print fault. (Se e Choosing a location on page 80.) If the whole page is too light, Toner Save mode may be on. Turn off Toner Save mode in the machine menu settings or Toner Save m ...
-
Brother MFC-7320 - page 110
100 Black toner marks a cross the page Make sure that you use paper that meets our specifications. (See Acceptable paper and other print media on page 14.) If you use label sheets for laser machines, the glue from the sheets may sometimes stick to the OPC drum surface. Clean the drum unit. (See Cleaning the drum unit on page 120.) Do no ...
-
Brother MFC-7320 - page 111
Troubleshooting an d routine maintenance 101 B Setting dial tone detection B When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number. By changing the Dial Ton e setting to Detection you can make your ma chine dial as soon as it detects a dial tone. Th is setting can save a ...
-
Brother MFC-7320 - page 112
102 Telephone line interference B If you are having difficulty send ing or receiving a fax due to possible in terference on the telephone lin e, we recommen d that you adjust the Equaliz ation for compatibility to reduce the modem speed for fa x operations. a Press Menu , 2 , 0 , 1 . b Press a or b to choose Basic(for VoIP) or Normal or High (MFC-7 ...
-
Brother MFC-7320 - page 113
Troubleshooting an d routine maintenance 103 B Error and maintenance messages B As with any sophisticate d office product, errors may occur and consumable items ma y need to be replaced. If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most commo n err or and maintena nce mess ...
-
Brother MFC-7320 - page 114
104 Cooling Down Wait for a while The temperature of the drum unit or toner cartridge is too hot. The machine will pause its current print job and go in to cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD show s Cooling Down , and Wait for a while . Make sure that you can hear the fan in th e mach ...
-
Brother MFC-7320 - page 115
Troubleshooting an d routine maintenance 105 B Fuser Error The temperature of fuser unit does not rise at a specified temperature within spe cified tim e. Do one of the following: (MFC-7320 and MFC-7440N only) Received fax messages still in memory will be lost when the machine is turned off. See Transferring your faxes or Fax Journal report on ...
-
Brother MFC-7320 - page 116
106 No Response/Busy The number you dialle d does not answer or is busy. Verify the number and try again. Not Registered You tried to access a One Touch or Speed Dial number that is not programmed . Set up the One Touch or Speed Dial number. (See Storing one touch dial numbers on pag e 52 an d Storing speed dial nu mbers on page 53.) Out of Memory ...
-
Brother MFC-7320 - page 117
Troubleshooting an d routine maintenance 107 B Transferring your faxes or Fax Journal report B If the LCD shows: Init Unable XX Print Unable XX Scan Unable XX We recomme nd transfer ring your faxes to another fax machine or to your PC. (See Transferring faxes to anothe r fax machine on page 107 or Transferr ing faxes to your PC on page ...
-
Brother MFC-7320 - page 118
108 b Do one of the following: If the LCD shows No Data , ther e are no faxes left in the machine’s memory. Press Stop/Exit . Enter the fax number to which faxes will be forwarded. c Press Start . Transferring faxes to your PC B You can transfer the faxes from your machine’s memory to your PC. a Make sure that you have installed MFL-Pro ...
-
Brother MFC-7320 - page 119
Troubleshooting an d routine maintenance 109 B Document jams B If the document is jammed, follow the steps below. Note After removing a jammed document, check that no pa per scraps are left in the machine t hat could cause another jam. Document is jammed in the top of the ADF unit B a Take out any paper from the ADF th at is not jammed. b Open the ...
-
Brother MFC-7320 - page 120
110 Paper jams B To clear paper jams, please follow the steps in this section. Note • Please confirm that you have installed both a toner cartridge and a dr um unit in the machine. If you have not insta lled a drum unit or have installed the dr um unit incorrectly, then this may ca use a paper jam in your Brother machine. • If the error message ...
-
Brother MFC-7320 - page 121
Troubleshooting an d routine maintenance 111 B CAUTION We recommend that you place the dr um unit and toner cartridge assemb ly on a clean, flat surfac e with a sheet of disposable paper or cloth under neath it in case you accidentally spill or scatter toner. c If you cannot remove the drum unit an d toner cartridge assembly ea sily, do not use ext ...
-
Brother MFC-7320 - page 122
112 Paper is jammed at the back of the machine B a Open the front cover. b Slowly take out the drum unit and toner cartridge assembly. CAUTION We recommend that you place the dr um unit and toner cartridge assemb ly on a clean, flat surfac e with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner. c O ...
-
Brother MFC-7320 - page 123
Troubleshooting an d routine maintenance 113 B Paper is jammed inside the drum uni t and toner cartridge assembly B a Open the front cover. b Slowly take out the drum unit a nd toner cartridge assembly. CAUTION We recommend that you place the dr um unit and toner cartridge assemb ly on a clean, flat surfac e with a sheet of disposable paper or clot ...
-
Brother MFC-7320 - page 124
114 e Put the toner cartridge back into the drum unit until you hear it lock into place. If you put it in correctly, the green lock lever will lift automatically. f Put the drum unit and toner cartr idge assembly back in the machine. g Close the front cover. Routine maintenance B WARNING Use neutral detergents. DO NOT use any flamm able substances ...
-
Brother MFC-7320 - page 125
Troubleshooting an d routine maintenance 115 B c Wipe the outside of the machine with a soft cloth to remove dust. d Remove any paper that is in the paper tray. e Wipe the inside and the outside of the paper tray with a soft cloth to remove dust. f Re-load the pape r and put the p aper tray firmly back in the machine. g Plug the machine’ s power ...
-
Brother MFC-7320 - page 126
116 d Plug the mach ine’s power cord back into the electrical socket first, and r econnect all cables and teleph one line cord. Turn on the machine. Note In addition to cleaning the sca nner glass and glass strip with a soft lint-free cloth moistened with water, run you r finger tip over the glass to see if you can feel anything on it. If you fee ...
-
Brother MFC-7320 - page 127
Troubleshooting an d routine maintenance 117 B WARNING HOT SURFACE After you have just used the ma chine, some internal parts of the machine will be extremely ho t. To prevent injury, wh en you open the front or back cover (back output tray) of the machine , DO NOT touch the shaded parts shown in the illustration. CAUTION To prevent damage to the m ...
-
Brother MFC-7320 - page 128
118 d Put the drum unit and toner cartr idge assembly back in the machine. e Close the front cover. f Plug the mach ine’s power cord back into the electrical socket firs t, and then plug in the telephone line cord. Turn on the machine. Cleaning the corona wire B If you have print quality problems, clean the corona wire as follows: a Turn off the ...
-
Brother MFC-7320 - page 129
Troubleshooting an d routine maintenance 119 B d Clean the corona wire inside the dr um unit by gently sliding the green tab fro m right to left and left to right several times. CAUTION Be sure to return the green tab to the ho me position ( a ) (1). If you do not, printed pages may have a vertical stripe . e Put the drum unit and toner car tridge ...
-
Brother MFC-7320 - page 130
120 Cleaning the drum unit B If you have print quality problems, clean the drum unit as follows. a Turn off the machine. Un plug the telephone line cord first, and then unplug the power cord from the electrical socket. b Open the front cover. c Slowly take out the drum unit and toner cartridge assembly. CAUTION We recommend that y ou put the drum u ...
-
Brother MFC-7320 - page 131
Troubleshooting an d routine maintenance 121 B e Put the print sample in front of the dr um unit, and find the exact position of the poor print. f Turn the drum unit gear by hand while looking at the surface of the OPC drum (1). g When you have found the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a dry cot ...
-
Brother MFC-7320 - page 132
122 Replacing the consumable items B You will need to replace the consumable items wh en the machine indicates that the life of the consumable is over. Note • Discard used consumable item s according to local r egulations. ( See EU Directive 2002/9 6/EC and EN50419 on page 85.) If you have qu estions, call yo ur local waste disposal office. Be su ...
-
Brother MFC-7320 - page 133
Troubleshooting an d routine maintenance 123 B WARNING HOT SURFACE After you have just used the ma chine, some internal parts of the machine will be extremely ho t. To prevent injury, wh en you open the front or back cover (back output tray) of the machine , DO NOT touch the shaded parts shown in the illustration. a Open the front cover. b Slowly t ...
-
Brother MFC-7320 - page 134
124 CAUTION Handle the toner ca rtri dge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once. To avoid print quality prob lems, DO NOT touch the shad ed parts shown in the illustrations. Brother machines are designed to wor k with toner of a particular specification and will work to a level of optimum ...
-
Brother MFC-7320 - page 135
Troubleshooting an d routine maintenance 125 B f Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in correctly, the lock lever will lift automatically. CAUTION Make sure that you put in the t oner cartridge corr ectly or it may separate from the drum unit. g Clean the corona wire of the drum uni ...
-
Brother MFC-7320 - page 136
126 Note The drum unit is a cons umable item, an d it is necessary to replace it periodically. There ar e many facto rs that determ ine the actual drum life, such as temper ature, humidity, type of paper and how mu ch toner you use fo r the number of pages per print job. The estimated drum life is approximately 12,000 pages 1 . The actual number of ...
-
Brother MFC-7320 - page 137
Troubleshooting an d routine maintenance 127 B To prevent dam age to the machine ca used by static electricit y, DO NOT touch the electrodes shown in the illustration. c Push down the green lock lever and take the toner cartridge out of the dr um unit. CAUTION To avoid print quality prob lems, DO NOT touch the shad ed parts shown in the illustratio ...
-
Brother MFC-7320 - page 138
128 g Put the new drum unit and toner cartridge assembly in the mach ine. h Press Clear/Back . To confirm you are installing a new drum, press 1 . i When the LCD shows Accepted , close the front cover. Machine information B Checking the serial number B You can see the mach ine’s serial number on the LCD. a (For MFC-7320) Press Menu , 4 , 1 . (For ...
-
Brother MFC-7320 - page 139
Troubleshooting an d routine maintenance 129 B Packing and shipping the machine B CAUTION Make sure that the machine has fully cooled down by leaving it disconnected from the power for at least 30 minutes before packing. When you transpor t the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, ...
-
Brother MFC-7320 - page 140
130 C On-screen programming C Your machine ha s been desi gned to be easy to use. The LCD provides on-screen programming using the me nu keys. We have created step by step on-screen instructions to help you prog ram your machine. Simply follow the steps as they guide you through the menu selectio ns and programming o ptions. Menu table C You can pr ...
-
Brother MFC-7320 - page 141
Menu and features 131 C How to access the menu mode C a Press Menu . b Choose an option. Press 1 for General Setup menu . Press 2 for Fax menu. Press 3 for Copy menu. (MFC-7320 only) Press 4 for Machine info . menu. (MFC-7440N only) Press 4 for LAN menu. Press 5 for Machine Info. menu. (MFC-7840W only) Press 4 for Printer me ...
-
Brother MFC-7320 - page 142
132 Menu table C The factory settings are shown in Bold with an asterisk. Choose & OK Choose & OK to accept to exit Main Menu Submenu Menu Selectio ns Options De scriptions Page 1.General Setup 1.Mode Timer — 0 Sec 30 Secs 1 Min 2 Mins * 5 Mins Off Sets the time to return to Fax mode and the time the machine will change from individual us ...
-
Brother MFC-7320 - page 143
Menu and features 133 C 1.General Setup (continued) 4.Volume 1.Ring Off Low Med * High Adjusts the rin g volume. 22 2.Beeper Off Low Med * High Adjusts the vol ume level of the beeper. 22 3.Speaker Off Low Med * High Adjusts the speaker volume. 22 5. Auto Dayli ght — On * Off Changes for Daylight Savings Time automatically. 23 6.Ecology 1.Toner S ...
-
Brother MFC-7320 - page 144
134 2.Fax (continued) 1. Setup Rece ive (continued) 2.F/T Ring Time 20 Secs 30 Secs * 40 Secs 70 Secs Sets the pseudo/double- ring time in Fax/Tel mode. 41 3.Fax Detect On * Off Receives fax messages without pressing Start . 41 4.Remote Codes On ( l 51, #51) Off * Allows you to answer all calls at an extension or external phone and use codes to tur ...
-
Brother MFC-7320 - page 145
Menu and features 135 C 2.Fax (continued) 2.Setup Send (continued) 4.Batch TX On Off * Combines delayed faxes going to the same fax number at the same time of day into one transmission. 37 5.Real Time TX Next Fax:On Next Fax:Off On Off * Sends a fax without using the memory. 36 6.Polled TX Standard * Secure Sets up your machine with a document to b ...
-
Brother MFC-7320 - page 146
136 2.Fax (continued) 4. Report Set ting (continued) 2. Journal Perio d Off Every 50 Faxes * Every 6 Hours Every 12 Hours Every 24 Hours Every 2 Days Every 7 Days Sets the interval for automatic printing of the Fax Journal. 65 5.Remote Fax Opt 1.Forward/Store (Backup Print) Off * Fax Forward Fax Storage PC Fax Receive Sets the machine to forward fa ...
-
Brother MFC-7320 - page 147
Menu and features 137 C 2.Fax (continued) 0. Miscellane ous 1.Compatibility High 1 (MFC-7840W only) Normal * Basic(for VoIP) 1 Factory setting for MFC-7840W Adjusts the equalization for transmission difficulties. VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, choose Basic(for V ...
-
Brother MFC-7320 - page 148
138 Main Menu Submenu Menu Selections Options Descrip tions Page 4.LAN (MFC- 7440N only) 1.TCP/IP 1.BOOT Method — Auto * Static RARP BOOTP DHCP Chooses the BOOT method that best suits your needs. See Network User’s Guide on the CD-ROM. 2.IP Address — [000-255]. [000-255]. [000-255]. [000-255] Enter the IP address. 3.Subnet Mask — [000-255]. ...
-
Brother MFC-7320 - page 149
Menu and features 139 C 4.LAN (MFC- 7440N only) (continued ) 1.TCP/IP (continued) 0.IPv6 — On Off * Enable or Disable the IPv6 protocol. If you want to use the IPv6 protocol, visit http://solutions .brother.com/ for more information. See Network User’s Guide on the CD-ROM. 2.Ethernet —— Auto * 100B-FD 100B-HD 10B-FD 10B-HD Chooses the Ether ...
-
Brother MFC-7320 - page 150
140 Main Menu Submenu Menu Selections Options Descriptions Page 5.LAN (MFC- 7840W only) 1.Wired 1.TCP/IP 1.BOOT Method Auto * Static RARP BOOTP DHCP Chooses the BOOT method that best suits your needs. See Network User’s Guide on the CD - ROM . 2.IP Address [000-255]. [000-255]. [000-255]. [000-255] Enter the IP address. 3.Subnet Mask [000-255 ]. ...
-
Brother MFC-7320 - page 151
Menu and features 141 C 5.LAN (MFC- 7840W only) (continued ) 1.Wired (continued) 2.Ethernet — Auto * 100B-FD 100B-HD 10B-FD 10B-HD Chooses the Ethernet link mode. See Network User’s Guide on the CD - ROM. 3. Set to Default 1.Reset 2.Exit — Restore the wired network setting to factory default. 4 . Wired E nable — On * Off Enable or Disable t ...
-
Brother MFC-7320 - page 152
142 5.LAN (MFC- 7840W only) (continue d) 2.WLAN (continued) 1.TCP/IP (continued) 8.DNS Server ( Primary ) 000.000.000. 000 ( Secondary ) 000.000.000. 000 Specifies the IP address of the primary or secondary DNS server. See Network User’s Guide on the CD - ROM. 9.APIPA On * Off Automatically allocates the IP address from the link-local address ran ...
-
Brother MFC-7320 - page 153
Menu and features 143 C 5.LAN (MFC- 7840W only) (continued ) 2.WLAN (continued) 6. Set to Default 1.Reset 2.Exit — Restore the wireless network setting to factory default. See Network User’s Guide on the CD - ROM. 7. WLAN Ena ble — On Off * Enable or Disable the wireless LAN manually. 3.Scan to FTP — Color 150 dpi * Color 300 dpi Color 600 ...
-
Brother MFC-7320 - page 154
144 Main Menu Submenu Menu Selectio ns Options De scriptions Page 4.Machine Info. (MFC-7320) 5.Machine Info. (MFC - 7440N) 6.Machine Info. (MFC - 7840W) 1.Serial No. — — You can check the serial number of your machine. 128 2. Page Count er — Total Fax/List Copy Print You can check the number of total pages th e machine has printed during its ...
-
Brother MFC-7320 - page 155
Menu and features 145 C Entering text C When setting certain menu sele ctions, such as the Station ID, you will need to type text characters. The dial pad keys ha ve letters printed on them. The keys: 0 , # and l do no t have printed letters be cause they are used for special characters. Press the appropriate dial pad key the number of times shown ...
-
Brother MFC-7320 - page 156
146 Repeating letters To enter a character o n the same key as the previo us character, press c to move th e cursor right before pre ssing the key again. Special charact ers and symbols Press l , # or 0 , then press d or c to move the cursor to the symbol or character you want. Press OK to choose it. The symbols and characters below will appear dep ...
-
Brother MFC-7320 - page 157
147 D D General D Specifications D Printer Type Laser Print Method Electrophotography by semico nductor laser beam scanning Memory Capacity 16 MB (MFC-7320) 32 MB (MFC-7440N and MFC-78 40W) LCD (liquid crystal displa y) 16 characters × 2 lines Power Source 220 - 240V 50 /60Hz Power Consumption Peak: 1056 W Copying: Average 320 W 1 Sleep: (MFC-7320 ...
-
Brother MFC-7320 - page 158
148 Temperature Operating : 10 to 32.5 ° C Storage: 5 to 35 ° C Humidity Operating: 2 0 to 80% (without condensation) Storage: 10 to 90% (without condensation) ADF (automatic document feeder) Up to 35 pages ( Staggered) (80 g/m 2 ) Recommended Environment for Best Resu lts: Temperat ure: 20 to 30 ° C Humidity: 50% - 70% Paper: Xerox Premier 80 g ...
-
Brother MFC-7320 - page 159
Specifications 149 D Print media D 1 For transparencies or labels, we r ecommend removing printed pages from the output paper tray immediately after they exit the machine to avoid the possibility of smudging. Paper Input Paper Tray Paper Type: Plain paper, Transpar encies 1 or Recycled paper Paper Size: Letter, A4, B5 (ISO), A5, B6, A6 and ...
-
Brother MFC-7320 - page 160
150 Fax D Compatibility ITU-T Group 3 Coding System MH/MR/MMR (MFC-7320 a nd MFC-7440 N) MH/MR/MMR/J BIG (MFC-7840W) Modem Speed Automatic Fallback: 14,400 bps (MFC-7320 and M FC-7440N) 33,600 bps (MF C-7840W) Document Size ADF Width: 148 to 215.9 mm ADF Length: 148 to 355.6 mm Scanner Glass Width: Max. 215.9 mm Scanner Glass Length : Max. 297 mm S ...
-
Brother MFC-7320 - page 161
Specifications 151 D 1 ‘Pages’ refers to the ‘Brother Standard Char t No. 1’ (a typical business letter, Standard resolution, MMR code). Specifications and printed materials ar e subject to change without prior notice. 2 ‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical bu siness letter, Standard resolution, MMR code). Specific ...
-
Brother MFC-7320 - page 162
152 Copy D 1 The first copy out time may vary depend ing on scanner lamp warm up time. Colour/Monochrome Monochrome Document Size ADF Width: 148 to 215.9 mm ADF Length: 148 to 355.6 mm Scanner Glass Width: Max. 215.9 mm Scanner Glass Le ngth: Max. 297 mm Copy Width: Ma x. 210 mm Multiple Cop ies Stacks or Sorts up to 99 pages Reduce/Enlarge 25% to ...
-
Brother MFC-7320 - page 163
Specifications 153 D Scan D 1 Maximum 1200 × 1200 dpi scanning with the WIA driver in Windows ® XP/Windows Vista ® (resolution up to 19200 × 19200 dpi can be chosen by usi ng the Bro ther scanner utility) Colour/Monochrome Yes TWAIN Compliant Yes (Windows ® 2000 Pro fessional/XP/ XP Professional x6 4 Edition/Windows Vista ® ) Mac OS ® X 10.2 ...
-
Brother MFC-7320 - page 164
154 Print D 1 The print speed may change depending on the type of do cument you print. Interfaces D 1 Your machine has a Full-Speed USB 2.0 interface. The mach ine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are not supp orted. Emulations (MFC-7840W only) PC L6, BR-Script3 (PostScript ® 3) Printer Driv ...
-
Brother MFC-7320 - page 165
Specifications 155 D Computer requirements D Minimum System Requirements and Supp orted PC Software Functions Computer Platform & Operating System Version Supporte d PC Software Functions PC Interface Processor Minimum Speed Mini mum RAM Recom mended RAM Hard Disk Space to install For Drivers For Applic ations Windows ® Operating System 1 Wind ...
-
Brother MFC-7320 - page 166
156 1 Microsoft ® Internet Explorer 5.5 or greater. 2 For WIA, 1200x1200 resolution. Br other Scanner Utility enables to enhance up to 19200 x 19200 dpi. 3 Third party USB ports are not supp orted. 4 PaperPort™ 11SE supports Microsoft ® SP4 or higher for Windows ® 2000 and SP2 or higher for XP. Macint osh ® Operating System Mac OS ® X 10.2.4 ...
-
Brother MFC-7320 - page 167
Specifications 157 D Consumable items D 1 Approx. cartridge yield is declar ed in accordance with ISO/IEC 19752. 2 Drum yield is approximate, and may vary by type of use. Toner Cartridge Life Standard Toner Cartridge: TN-2110 : Approx. 1,5 00 pages (A4) 1 High-Yield Toner Car tridge: TN-2120 : Approx. 2,6 00 pages (A4) 1 Drum Unit DR-2100 : A pprox ...
-
Brother MFC-7320 - page 168
158 Ethernet wired network (MFC-7440N and MFC-7840W) D 1 PC Fax Send for Mac ® 2 Printing only for Windows Server ® 2003 3 Mac OS ® X 10.2.4 or greater (mDNS) 4 BRAdmin Professional and Web BRAdmin are available as a dow nload from http://solutions.brother.com/. Network board model name NC-6600h (MFC-7440N) LAN You can connect your machine to a ...
-
Brother MFC-7320 - page 169
Specifications 159 D Ethernet wireless network (MFC-7840W only) D 1 PC Fax Send for Mac ® 2 Only printing for Windows Server ® 2003 3 Mac OS ® X 10.2.4 or greater (mDNS) 4 BRAdmin Professional and Web BRAdmin are available as a dow nload from http://solutions.brother.com/. Network board model name NC-7400w LAN You can connect your machine to a n ...
-
Brother MFC-7320 - page 170
160 Authentication and encrypti on for wireless users only D Authentication method D The Brother machine suppor ts the following methods: Open system Wireless devices are allowe d to access the network without any authe ntication. Shared key A secret pre-determined key is shared by all de vices that will access the wireless network. The Bro ...
-
Brother MFC-7320 - page 171
Specifications 161 D Network key D There are some rules for each security method: Open system/Shared key with WEP This key is a 64-bit or 128-bit value that must be entered in an ASCII o r hexadecimal format. • 64 (40) bit ASCII: Uses 5 text characters. e.g.“WSL AN” (this i s case se nsitive). • 64 (40) bit hexade cimal: Uses 10 digits ...
-
Brother MFC-7320 - page 172
162 Wireless one-push configuration D If your wireless access point suppo rts either SecureEasySe tup™, Wi-Fi Protected Setup™ (PBC 1 ) or AOSS™, you can config ure the machin e easily without a compu ter. By pushing a button on the wireless LAN router / access point and using the menu on the machine, you can set up the wireless network and s ...
-
Brother MFC-7320 - page 173
163 E This is a comprehensive list of features and te rms that appear in Brother manuals. Availability of these features depends on the model you pur chased. E Glossary E ADF (automatic document feeder) The document can be placed in the ADF and scanned on e page at a time automatically. Auto Reduction Reduces the size of incoming faxe s. Automatic ...
-
Brother MFC-7320 - page 174
164 ECM (Error Corr ection Mode) Detects errors duri ng fax transmission and resends th e pages of the fax that had an error. Extension telephone A telephone on the fax number that is plugged into a separate wall socket. External phone A TAD (telephone answering de vice) or telephone that is connected to your machine. F/T Ring Time The length of ti ...
-
Brother MFC-7320 - page 175
Glossary 165 E Out of Paper Reception Receives faxes into the machine’s memory when the machine is ou t of paper. Overseas Mode Makes tempor ary changes to the fax tones to accom modate noise and st atic on overseas telephone lines. Pause Allows you to place a 2.8 second delay in the dialling sequence while yo u are dialling using the dial pad or ...
-
Brother MFC-7320 - page 176
166 User Settings List A printed report tha t shows the current settings of the machine. Xmit Report (Transmissio n Verification Report) A listing for each tran smission, that shows its date, time and number. ...
-
Brother MFC-7320 - page 177
Index 167 F F A ADF (automatic document feeder) faxing .................. ................ .................. 32 using ................ ................ .................... . 19 Answering machine (TAD) connecting ................. ................... ........ 46 Apple ® Macintosh ® See Software User’s Guide on the CD-ROM. Automatic fax receive ...
-
Brother MFC-7320 - page 178
168 Equalization ................... ................... ..... 102 Error messag es on LCD ......... ............... 103 Comm. Error .................. ................... .. 103 Init Unable XX ...... ................... ............ 105 No Paper .............. ................... ............ 105 Not Register ed ............... ................... ...
-
Brother MFC-7320 - page 179
169 F checking the remaining life of drum unit ................ .................... ................ ......... 128 replacing drum uni t ................. ................... ...... 125 toner cartridg e .................. ................ 122 Manual dialling .............. ................... .................. 51 receive ............. ............ ...
-
Brother MFC-7320 - page 180
170 speed dial changing . .................... ................... .... 53 custom scan profile .................. .......... 53 setting up ............. .................... .......... 53 using .... .................... ................... ....... 51 R Redial/Pause key ........... ................... ....... 52 Reducing copies ................ .... ...
-
Brother MFC-7320 - page 181
171 F scanning .............. ................... ........... 92 software ............... ................... ........... 92 telephone line ......................... ......... 102 maintenance messages on LCD ......... 103 paper jam ...................... ................... ... 110 V Volume, setting beeper ..................... ................... ...
-
Brother MFC-7320 - page 182
...
-
Brother MFC-7320 - page 183
...
-
Brother MFC-7320 - page 184
This machine is approved for use in the countr y of purc hase only, local Brother companies or their dealer s will only support machines purchs ed in their own countries. ...
Haben Sie eine Frage bezüglich Brother MFC-7320?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Brother MFC-7320 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Brother MFC-7320 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.