Bedienungsanleitung Mustek KP100

13 Seiten 0.25 mb
Download

Zur Seite of 13

Summary
  • Mustek KP100 - page 1

    KB4000 / KP100 / SD100 MULTIFUNCTION SECURITY DEVICE USER’S MANUAL Rev. B MANUFACTURED BY: MUSTEK CORP. AN ISO-9001 AND ISO-14001 CERTIFIED MANUFACTURER ...

  • Mustek KP100 - page 2

    SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiat e radio frequency energy and, if not installed and used in accordance with the instructions manua l, may cause interference to radio comm unications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Ru ...

  • Mustek KP100 - page 3

    GENERAL DESCRIPTION OVERVIEW Table below indicates construction of this series of security devices. KB4000 KP100 SD100 Structure Stand alone Upgrade kit for Jiva (TP) series Programmable keypad Horizontal layout Vertical layout N. A. Magnetic stripe reader Optional Smart card reader Optional Optional for one of the two (Note) Finger print sensor Op ...

  • Mustek KP100 - page 4

    • Magnetic Stripe Reader (MSR interface for SD100) ∗ ISO 7811 head reader for tracks 1 and 2 ∗ ISO 7811 reader head for tracks 2 and 3 ∗ ISO 7811 reader head for tracks 1, 2 and 3 ∗ JIS/II reader head • Smart card reader • Finger print sensor • iButton receptor • iButton key Note: if all devices utilizing a specific interface are ...

  • Mustek KP100 - page 5

    INSTALLATION UNPACKING CONTENTS Items packed in for KB4000 KP100 SD100 The multifunction security device itself Yes Yes Yes Screws to hold the upgrade kit to Jiva series or TM4000 series or the like No Yes Yes 24 pcs of transparent key caps for single key Yes Yes No 1 pc of key clip Yes Yes No Legend sheets Yes Yes No This manual Yes Yes Yes Utilit ...

  • Mustek KP100 - page 6

    You may find two screw holes on back of the right side of the main unit of Jiva series or TM4000 series or the like. Just align the upgrade unit on the right edge of the main unit after removing these 2 screws then replace them with the attached 2 screws and fasten them with washer as indicated in the picture below. Back of Jiva Series The Upgrade ...

  • Mustek KP100 - page 7

    in SD100 could also be missing if the SD100 is purchased without the special type of MSR. Connect the USB connector of KB4000 to a USB hub or the USB port in a PC or a Posiflex POS system or touch monitor TM4000. Connect the USB connector of KP100 or SD100 to one of the USB ports of Jiva series or TM4000 in connector area. Connect the PS/2 KB conne ...

  • Mustek KP100 - page 8

    If a PS/2 keyboard is to be used in Jiva series or TM4000 series with SD100 installed with iButton receptor, pl ease connect it to the female connector from SD100. However, should there be an y compatibility issue for this cascaded keyboard, please try use another brand keyboard or a USB key board for application. If a programmable keyboard is to b ...

  • Mustek KP100 - page 9

    OPERATION GUIDE SMART CARD READER Driver Installation The smart card reader device driver has to be installed before this device can be accessed by the application software. Please find the device driver from the Posiflex Product Information CD ROM that comes alone with KB4000 or the Jiva or TM4000 series that KP100 or SD100 is to be applied to. Pl ...

  • Mustek KP100 - page 10

    type, each finger print has a central area around which the remainder of the pattern is distributed. This central area is the core of the finger print. Best performance is achieved when the core of the finger print is placed in the center of the sensor detection surface. It is essential to place the core of finger print inside the sensor area to ob ...

  • Mustek KP100 - page 11

    security device as drawn left with functions described in the table next page. The function for enabling each track of course comes in effect only when the track is physically available. The default status of JP1 for normal ISO reader delivery is: pin pairs 1- 2, 3-4 and 5-6 short while all the rest kept open. Pin Pair in JP1 Function When Short Wh ...

  • Mustek KP100 - page 12

    When replacement of keytop is required, it is advisable to use a flattop (minus sign) screw driver (Do not use th e attached key clip for this operation.) to help getting the key top off gently. Pl ease alway s first orientate the key tops before inserting any keytop into the case of the keypad. Failure to do so could result in permanent damage. Pl ...

  • Mustek KP100 - page 13

    hardware manufacturer may be different from what actually made available for the end user, it provides a basic idea on programming of the key pad. To program the content of the keypad, please visit the manufacturer’s web site described. IBUTTON RECEPTOR The iButton can be programmed to communicate on either RS232 interface or PS/2 KB interface th ...

Produzent Mustek Kategorie Scanner

Dokumente, die wir vom Produzenten des Geräts Mustek KP100 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Mustek
- Bedienungsanleitungen KP100
- Produktkarten Mustek
- Informationsbroschüren
- oder Energieetiketten Mustek KP100
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Mustek KP100.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Mustek KP100, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Mustek KP100. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Mustek KP100 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Mustek KP100, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Mustek KP100 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Mustek KP100 verständlich ist.

Eine gänzliche Bedienungsanleitung von Mustek sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Mustek KP100 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Mustek KP100 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Mustek KP100, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Mustek KP100 - die uns die ersten Schritte während der Nutzung von Mustek KP100 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Mustek KP100 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Mustek KP100 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Mustek KP100?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Mustek KP100 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Mustek KP100 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)