Bedienungsanleitung Asrock Fatal1ty Z68 Professional Gen3

86 Seiten Betrifft nicht
Download

Zur Seite of 86

Summary
  • Asrock Fatal1ty Z68 Professional Gen3 - page 1

    1 Fatal1ty Z68 Professional Gen3 Series User Manual V ersion 1.0 Published June 201 1 Copyright©201 1 ASRock INC. All rights reserved. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 2

    2 Who knew that at age 19, I would be a World Champion PC gamer . When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, but at that young age situations change rapidly . Because I’ve been blessed with grea ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 3

    3 LIVIN’ LARGE Since my fi rst big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of International media coverage on outlets such as MTV , ESPN and a 60 Minutes segment on CBS to name only a few . It's unreal - it's crazy . I’m living a dream by playing video games for ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 4

    4 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trade ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 5

    5 Contents 1 Introduction ......................................................... 7 1.1 Package Contents ......................................................... 7 1.2 Speci fi cations ................................................................. 8 1.3 Motherboard Layout ....................................................... 15 1.4 I/O Pan ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 6

    6 2.21 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit Without RAID Functions ................... 58 2.21.1 Installing Windows ® XP / XP 64-bit Without RAID Functions............................................................ 58 2.21.2 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit Without RAID Fu ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 7

    7 Chapter 1: Introduction Thank you for purchasing ASRock Fatal1ty Z68 Professional Gen3 Series moth- erboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 con ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 8

    8 1.2 Specifications Platform - A TX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm - All Solid Capacitor design (100% Japan-made high-quality Conductive Polymer Capacitors) CPU - Supports 2nd Generation Intel ® Core TM i7 / i5 / i3 in LGA1 155 Package - Advanced V12+6 Power Phase Design - Supports Intel ® T urbo Boost 2.0 T echnology - Support ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 9

    9 (Compliant HDMI monitor is required) (see CAUTION 8 ) - Supports Blu-ray Stereoscopic 3D with HDMI 1.4a - Supports HDCP function with DVI and HDMI ports - Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback with DVI and HDMI ports Audio - 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec) - Premium Blu-ray audio support - Supp ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 10

    10 ASMedia ASM1042, supports USB 1.0/2.0/3.0 up to 5Gb/s Connector - 4 x SA T A2 3.0 Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10, RAID 5, Intel Rapid Storage and Intel Smart Response T echnology), NCQ, AHCI and Hot Plug functions - 6 x SA T A3 6.0Gb/s connectors - 1x A T A133 IDE connector (supports 2 x IDE devices) - 1 x Floppy connecto ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 11

    11 - Lucid Virtu (see CAUTION 15 ) - ASRock On/Off Play T echnology (see CAUTION 16 ) - Hybrid Booster: - CPU Frequency Stepless Control (see CAUTION 17 ) - ASRock U-COP (see CAUTION 18 ) - Boot Failure Guard (B.F .G.) - Combo Cooler Option (C.C.O.) (see CAUTION 19 ) - Good Night LED Hardware - CPU T emperature Sensing Monitor - Chassis T emperatur ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 12

    12 CAUTION! 1. About the setting of “Hyper Threading T echnology”, please check page 71. 2. This motherboard supports Dual Channel Memory T echnology . Before you implement Dual Channel Memory T echnology , make sure to read the installation guide of memory modules on page 22 for proper installation. 3. DDR3 frequency options may depend on the ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 13

    13 1 1. ASRock Instant Flash is a BIOS fl ash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems fi rst like MS-DOS or Windows ® . With this utility , you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Fl ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 14

    14 again. T o improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 19. Combo Cooler Option (C.C.O.) provides the fl exible option to adopt three different CPU cooler types, Socket LGA 775, LGA 1 155 and LGA 1 156. Please be noticed that not all the 775 and 1 156 CPU Fan can be ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 15

    15 1.3 Motherboard Layout 24.4cm (9.6 in) 30.5cm (12.0 in) ATX12V1 CPU_FAN1 CPU_FAN2 CHA_FAN3 A TXPWR1 IDE1 USB3_4_5 SATA2_4_5 SATA2_2_3 SATA3_0_1 SATA3_A1_A2 SATA3_A3_A4 Dr. Debug PWRBTN RSTBTN HDLED RESET PLED PWRBTN PANE L1 CHA_FAN2 1 CHA_FAN1 FRONT_1394 1 USB8_9 1 USB6_7 1 COM1 1 FLOPPY1 IR1 1 1 HD_AUDIO1 1 HDMI_SPDIF1 CD1 PCI1 PCI2 PCIE5 PCIE4 ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 16

    16 1.4 I/O P anel * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Link Of f 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1Gbps connection ACT/LINK LED SPEED ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 17

    17 T o enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header . After restarting your computer , you will fi nd “Mixer” tool on your system. Please select “Mixer T oolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “ ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 18

    18 Chapter 2: Installation This is an A TX form factor (12.0" x 9.6", 30.5 x 24.4 cm) motherboard. Before you install the motherboard, study the con fi guration of your chassis to ensure that the motherboard fi ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physic ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 19

    19 2.3 CPU Installation For the installation of Intel 1 155-Pin CPU, please follow the steps below . Before you insert the 1 155-Pin CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Other- wise, the CPU will be serio ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 20

    20 Pin1 alignment key alignment key Pin1 1 155-Pin CPU 1 155-Pin Socket Step 3. Insert the 1 155-Pin CPU: Step 3-1. Hold the CPU by the edge where is marked with black line. Step 3-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. For proper inserting, please ensure to match the two orientation k ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 21

    21 2.4 Installation of CPU F an and Heatsink This motherboard is equipped with 1 155-Pin socket that supports Intel 1 155-Pin CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 1 155- Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink t ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 22

    22 2.5 Installation of Memor y Modules (DIMM) This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory T echnology . For dual channel con- fi guration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair in the slots of the same color . In other words, ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 23

    23 Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fi ts in one correct orientation. It will cause ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 24

    24 2.6 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 5 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 / PCIE3 (PCIE x1 slot; Black) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SA T A2 c ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 25

    25 2.7 SLI TM and Quad SLI TM Operation Guide This motherboard supports NVIDIA ® SLI TM and Quad SLI TM (Scalable Link Interface) technology that allows you to install up to three identical PCI Express x16 graphics cards. Currently , NVIDIA ® SLI TM technology supports Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS. NVID ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 26

    26 Step3. Align and insert ASRock SLI_Bridge_2S Card to the gold fi ngers on each graphics card. Make sure ASRock SLI_Bridge_2S Card is fi rmly in place. ASRock SLI_Bridge_2S Card Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE2 slot. 2.7.1 Graphics Card Setup 2 ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 27

    27 2.7.2 Driver Installation and Setup Install the graphics card drivers to your system. After that, you can enable the Multi- Graphics Processing Unit (GPU) feature in the NVIDIA ® nView system tray utility . Please follow the below procedures to enable the multi-GPU feature. For Windows ® XP / XP 64-bit OS: (For SLI TM mode only) A. Double-clic ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 28

    28 * SLI TM appearing here is a registered trademark of NVIDIA ® T echnologies Inc., and is used only for identi fi cation or explanation and to the owners’ bene fi t, without intent to infringe. For Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS: (For SLI TM and Quad SLI TM mode) A. Click the Start icon on your Windows taskbar . B. F ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 29

    29 1. If a customer incorrectly con fi gures their system they will not see the performance bene fi ts of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM Ready graphics card, a CrossFireX TM Ready motherboard and a CrossFireX TM Edition co-processor graphics card, must be installed correctly to bene fi t from the CrossFireX T ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 30

    30 CrossFire Bridge Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE2 slot. (Y ou may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter .) Step 2. Connect two Radeon graphics cards by installing CrossFire Br ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 31

    31 2.8.1.2 Installing Three CrossFireX TM -Ready Graphics Cards Step 1. Install one Radeon graphics card to PCIE2 slot. For the proper installation procedures, please refer to section “Expansion Slots”. Step 2. Install one Radeon graphics card to PCIE4 slot. For the proper installation procedures, please refer to section “Expansion Slots”. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 32

    32 CrossFire TM Bridge Step 5. Connect the DVI monitor cable to the DVI connector on the Radeon graph- ics card on PCIE2 slot. (Y ou may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter .) ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 33

    33 The Catalyst Uninstaller is an optional download. We recommend using this utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD website for A TI TM driver updates. Step 3. Install the required drivers to your system. For Windows ® XP OS: A. AMD TM recommends Windows ® XP Service Pack 2 or higher ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 34

    34 Although you have selected the option “Enable CrossFire TM ”, the CrossFireX TM function may not work actually . Y our computer will automatically reboot. After restarting your computer , please con fi rm whether the option “Enable CrossFire TM ” in “A TI Catalyst Control Center” is selected or not; if not, please select it again, a ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 35

    35 2. If you have installed onboard VGA driver from our support CD to your system already , you can freely enjoy the bene fi ts of dual monitor function after your system boots. If you haven’t installed onboard VGA driver yet, please install onboard VGA driver from our support CD to your system and restart your computer . 2.9 Dual Monitor and Su ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 36

    36 Surround Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (D-Sub, HDMI and DVI-D by the bundled HDMI to DVI adapter) and exter- nal add-on PCI Express VGA cards, you can easily enjoy the bene fi ts of surround display feature. Please refer to the following steps to set up a surround displa ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 37

    37 G. Repeat steps C through E for the diaplay icon identi fi ed by the number one to eight. For Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS: Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below . A. Click the ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 38

    38 2.10 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting Description Clear CMOS ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 39

    39 the red-striped side to Pin1 2.11 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! FDD connector (33-pin FLOPPY1) (see p.15 No. 31) Note: Make sure the red-s ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 40

    40 USB 2.0 Headers Besides four default USB 2.0 (9-pin USB6_7) ports on the I/O panel, there (see p.15 No. 28) are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB8_9) (see p.15 No. 27) USB 3.0 Header Besides four default USB 3.0 (19-pin USB3_4_5) ports on the I/O panel, there is (see p.15 No. 9 ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 41

    41 Infrared Module Header This header supports an (5-pin IR1) optional wireless transmitting (see p.15 No. 33) and receiving infrared module. Front Panel Audio Header This is an interface for front (9-pin HD_AUDIO1) panel audio cable that allows (see p.15 No. 34) convenient connection and control of audio devices. 1. High De fi nition Audio suppor ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 42

    42 Chassis and Power Fan Connectors Please connect the fan cables (4-pin CHA_F AN1) to the fan connectors and (see p.15 No. 22) match the black wire to the ground pin. CHA_F AN1/2/3 fan speed can be controlled through (3-pin CHA_F AN2) UEFI or AXTU. (see p.15 No. 23) (3-pin CHA_F AN3) (see p.15 No. 6) + 5 V DUMMY DUMMY SPEAKER 1 Chassis Speaker Hea ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 43

    43 CPU Fan Connectors Please connect the CPU fan (4-pin CPU_F AN1) cable to the connector and (see p.15 No. 3) match the black wire to the ground pin. 1 2 3 4 A TX Power Connector Please connect an A TX power (24-pin A TXPWR1) supply to this connector . (see p.15 No. 7) 12 1 24 13 (3-pin CPU_F AN2) (see p.15 No. 2) 20-Pin A TX Power Supply Installa ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 44

    44 HDMI_SPDIF Header HDMI_SPDIF header , providing (2-pin HDMI_SPDIF1) SPDIF audio output to HDMI (see p.15 No. 32) VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header . Serial port Header This COM1 header supports a (9-pin COM1) serial port module. ( ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 45

    45 Reset Switch Reset Switch is a smart switch, (RSTBTN) allowing users to quickly reset (see p.15 No. 18) the system. Clear CMOS Switch Clear CMOS Switch is a smart (CLRCBTN) switch, allowing users to quickly (see p.16 No. 17) clear the CMOS values. The Installation Guide of Rear USB 3.0 Brack et 2.12 Smart Switches The motherboard has three smart ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 46

    46 2.13 Dr . Debug Dr . Debug is used to provide code information, which makes troubleshooting even easier . Please see the diagrams below for reading the Dr . Debug codes. Status Code Description 0x00 Not used 0x01 Power on. Reset type detection (soft/hard) 0x02 AP initialization before microcode loading 0x03 North Bridge initialization before mic ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 47

    47 0x37 Post-Memory North Bridge initialization is started 0x38 Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x39 Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x3A Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x3B Post-Memory South Bridge initialization is starte ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 48

    48 0x62 Installation of the South Bridge Runtime Services 0x63 CPU DXE initialization is started 0x64 CPU DXE initialization (CPU module speci fi c) 0x65 CPU DXE initialization (CPU module speci fi c) 0x66 CPU DXE initialization (CPU module speci fi c) 0x67 CPU DXE initialization (CPU module speci fi c) 0x68 PCI host bridge initialization 0x69 ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 49

    49 0xA6 SCSI Detect 0xA7 SCSI Enable 0xA8 Setup V erifying Password 0xA9 Start of Setup 0xAA Reserved for ASL (see ASL Status Codes section below) 0xAB Setup Input W ait 0xAC Reserved for ASL (see ASL Status Codes section below) 0xAD Ready T o Boot event 0xAE Legacy Boot event 0xAF Exit Boot Services event 0xB0 Runtime Set Virtual Address MAP Begin ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 50

    50 2.14 Serial A T A (SA T A) / Serial A T AII (SA T AII) Hard Disks Installation This motherboard adopts Intel ® Z68 chipset that supports Serial A T A (SA T A) / Serial A T AII (SA T AII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5, Intel Rapid Storage and Intel Smart Response T echnology) functions. Y ou may install SA T A / SA T AII h ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 51

    51 2.16 Hot Plug and Hot Swap F unctions for SA T A / SA T AII HDDs This motherboard supports Hot Plug and Hot Swap functions for SA T A / SA T AII in RAID / AHCI mode. Intel ® Z68 chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SA T A host controllers developed thru a joint industry ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 52

    52 Caution 1. Without SA T A 15-pin power connector interface, the SA T A / SA T AII / SA T A3 Hot Plug cannot be processed. 2. Even some SA T A / SA T AII / SA T A3 HDDs provide both SA T A 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE 1x4-pin conventional power connector interface is de fi nitely not abl ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 53

    53 How to Hot Plug a SA T A / SA T AII / SA T A3 HDD: Points of attention, before you process the Hot Plug: Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SA T A / SA T AII / SA T A3 HDD damage and data loss. Connect SA T A data cable to the motherboard’s SA T AII / SA T A3 connector. Connec ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 54

    54 2.19 Driver Installation Guide T o install the drivers to your system, please insert the support CD to your optical drive fi rst. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 55

    55 After the installation of Windows ® XP / XP-64bit OS, if you want to manage RAID func- tions, you are allowed to use both “RAID Installation Guide” and “Intel Rapid Storage Infor- mation” for RAID con fi guration. Please refer to the document in the Support CD, “Guide to SA T A Hard Disks Installation and RAID Con fi guration”, wh ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 56

    56 2.20.3 Migrating a “RAID Ready” System to RAID 0, RAID 1 or RAID 5 If you have an existing “RAID Ready” system, then you can use the following steps to perform a migration from a single non-RAID con fi guration to a two drive RAID 0, RAID 1 con fi guration or three drive RAID 5 con fi guration. T o prepare for this, you will need anot ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 57

    57 2.20.4 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit With RAID F unctions If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit on your SA T A / SA T AII / SA T A3 HDDs with RAID functions, please follow below steps. STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen SA T A Con fi guration. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 58

    58 STEP 1: Set Up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen SA T A Con fi guration. B. Set the option “SA T A Mode” to [AHCI]. (For SA T A3_0, SA T A3_1, and SA T A2_2 to SA T A2_5 ports.) Set the option “SA T A3 Mode” to [AHCI]. (For SA T A3_A1 to SA T A3_A4 ports.) STEP 2: Make a SA T A / SA T AII / SA T A3 driver diskette. Pleas ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 59

    59 2.21.2 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit W ithout RAID F unctions If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your SA T A / SA T AII / SA T A3 HDDs without RAID functions, please follow below steps. Using SA T A / SA T AII / SA T A3 HDDs with NCQ function STEP 1: Set Up UEFI. A. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 60

    60 2.22 T eaming Function Operation Guide Dual LAN with T eaming function enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant images. Fault tolerance on the dual LAN network prevent ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 61

    61 4. Key in T eam Name and choose Link Aggregation LACP (802.3ad) for Settings. 5. Select two available onboard LAN cards and then press OK button. (After pressing OK button, system will show below warming message. Please choose Continue Anyway .) 6. After doing above settings, system will auto create a new Local Area Connection. 7. Reboot your ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 62

    62 For Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS: 1. Install T eaming driver from the following path of motherboard Support CD: .. Drivers other EXE_T eaming_Green(Normal) (This is a special driver for T eaming function only . If you don’t want to use T eaming, please install the LAN driver provided by our support CD link.) Wh ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 63

    63 5. Select two available onboard LAN cards and then press OK button. (After pressing OK button, system will show below warming message. Please choose Continue Anyway .) 6. After doing above settings, system will auto create a new Local Area Connection. 7. Reboot your system. Then, you will fi nd the Speed column of new Local Area Connection show ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 64

    64 Chapter 3: UEFI SETUP UTILITY 3.1 Introduction This section explains how to use the UEFI SETUP UTILITY to con fi gure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY . Y ou may run the UEFI SETUP UTILITY when you start up the computer . Please press <F2> or <Del> during the Power-On-Self-T est (POST) to e ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 65

    65 3.1.2 Navigation K eys Please check the following table for the function description of each navigation key . Navigation Key(s) Function Description / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - T o change option for the selected items <Enter> T o bring up the selected screen <F1> T o ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 66

    66 3.3 OC T weaker Screen In the OC T weaker screen, you can set up overclocking features. Advanced T urbo 50 Y ou can use this option to increase your system performance. This option appears only when your CPU supports this function. Load Optimized CPU OC Setting Y ou can use this option to load optimized CPU overclocking setting. Please note that ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 67

    67 Intel T urbo Boost T echnology Use this item to enable or disable Intel T urbo Boost T echnology . T urbo Boost allows processor cores to run faster than marked frequency in spe- ci fi c condition. The default value is [Enabled]. T urbo Boost Power Limit Use this item to adjust T urbo Boost power limit. Con fi guration options: [Auto] and [Man ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 68

    68 CAS# Latency (tCL) Use this item to change CAS# Latency (tCL) Auto/Manual setting. The de- fault is [Auto]. RAS# to CAS# Delay (tRCD) Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting. The default is [Auto]. Row Precharge Time (tRP) Use this item to change Row Precharge T ime (tRP) Auto/Manual setting. The default is [Auto]. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 69

    69 ODT NOM (CHA) Use this item to change ODT NOM (CHA) Auto/Manual setting. The de- fault is [Auto]. ODT WR (CHB) Use this item to change ODT WR (CHB) Auto/Manual setting. The default is [Auto]. ODT NOM (CHB) Use this item to change ODT NOM (CHB) Auto/Manual setting. The de- fault is [Auto]. V oltage Control Power Saving Mode Use this to enable or ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 70

    70 Setting wrong values in this section may cause the system to malfunction. 3.4 Advanced Screen In this section, you may set the con fi gurations for the following items: CPU Con fi gu- ration, North Bridge Con fi guration, South Bridge Con fi guration, Storage Con fi gura- tion, Super IO Con fi guration, ACPI Con fi guration and USB Con ? ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 71

    71 3.4.1 CPU Configuration Intel Hyper Threading T echnology T o enable this feature, it requires a computer system with an Intel proces- sor that supports Hyper-Threading technology and an operating system that includes optimization for this technology , such as Microsoft® Win- dows® XP / V istaTM / 7. Set to [Enabled] if using Microsoft® Windo ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 72

    72 CPU Thermal Throttling Y ou may select [Enabled] to enable CPU internal thermal control mecha- nism to keep the CPU from overheated. Intel Virtualization T echnology When this option is set to [Enabled], a VMM (Virtual Machine Architecture) can utilize the additional hardware capabilities provided by V anderpool T echnology . This option will be ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 73

    73 3.4.2 North Bridge Configuration Low MMIO Align Low MMIO resources align at 64MB/1024MB. The default value is [1024MB]. VT -d Use this to enable or disable Intel® VT -d technology (Intel® Virtualization T echnology for Directed I/O). The default value of this feature is [Disabled]. Primary Graphics Adapter This allows you to select [Onboard], ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 74

    74 DVMT Memory Y ou are allowed to adjust the shared memory size in this item. Configuration options: [256MB] and [Maximum]. The option [Maximum] only appears when you adopt the memory module with 1024MB or above. ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 75

    75 3.4.3 South Bridge Configuration Restore on AC/Power Loss This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. Deep Sx Mobile platforms suppor ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 76

    76 3.4.4 Storage Configuration SA T A3 Mode This item is for SA T A3_A1 to SA T A3_A4 ports. Use this to select SA T A3 mode. Configuration options: [IDE Mode], [AHCI Mode] and [Disabled]. The default value is [IDE Mode]. SA T A Mode This item is for SA T A3_0, SA T A3_1, and SA T A2_2 to SA T A2_5 ports. Use this to select SA T A mode. Con fi gur ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 77

    77 3.4.5 Super IO Configuration OnBoard Floppy Controller Use this item to enable or disable fl oppy drive controller . Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Con fi guration options: [3F8h / IRQ4] and [3E8h / IRQ4]. Infrared Port Us ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 78

    78 3.4.6 ACPI Configuration Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. PS/2 Keyboard Power On Use this item to enable or disable PS/2 keyboard to tur ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 79

    79 3.4.7 USB Configuration USB 2.0 Controller Use this item to enable or disable the use of USB 2.0 controller . USB 3.0 Controller Use this item to enable or disable the use of USB 3.0 controller . Legacy USB Support Use this option to select legacy support for USB devices. There are four con fi guration options: [Enabled], [Disabled], [Auto] and ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 80

    80 3.5 Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan 1 & 2 Setting This allows you to set the CPU fan 1 & 2 speed. Con ? ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 81

    81 3.6 Boot Screen In this section, it will display the available devices on your system for you to con fi g- ure the boot settings and the boot priority . Boot Option Priorities Boot Option #1 Set the fi rst priority of the system boot device. Boot Option #2 Set the second priority of the system boot device. Boot Option #3 Set the third priority ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 82

    82 3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. [Enabled]. AddOn ROM Display Use this option to adjust AddOn ROM Display . If you enable the option Full Screen Logo” but you want to see the AddOn ROM information when the system boots, please s ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 83

    83 3.8 Exit Screen Save Changes and Exit When you select this option, it will pop-out the following message, “Save con fi guration changes and exit setup?” Select [Y es] to save the changes and exit the UEFI SETUP UTILITY . Discard Changes and Exit When you select this option, it will pop-out the following message, “Discard changes and exit ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 84

    84 Chapter 4: Sof tware Support 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. Because motherboard settings and hardware options vary , use the setup procedures in this chapter for general refer- ence only . Refer to your OS docume ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 85

    85 Installing OS on a HDD L arger Than 2TB This motherboard is adopting UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow below procedure to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP1 or above) or Windows ® 7 64-bit . 2. Press <F2> or <Delete ...

  • Asrock Fatal1ty Z68 Professional Gen3 - page 86

    86 Note 1. For Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit users, if you plan to install the PCI Express graphics card for video output, please set the UEFI option "IGD Multi-Monitor" to [Disabled] to disable the onboard VGA in advance. 2. Intel ® will update the new version Rapid Storage T echnology driver in the near future. ...

Produzent Asrock Kategorie Motherboard

Dokumente, die wir vom Produzenten des Geräts Asrock Fatal1ty Z68 Professional Gen3 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Asrock
- Bedienungsanleitungen Fatal1ty Z68 Professional Gen3
- Produktkarten Asrock
- Informationsbroschüren
- oder Energieetiketten Asrock Fatal1ty Z68 Professional Gen3
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Asrock Fatal1ty Z68 Professional Gen3.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Asrock Fatal1ty Z68 Professional Gen3, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Asrock Fatal1ty Z68 Professional Gen3. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Asrock Fatal1ty Z68 Professional Gen3 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Asrock Fatal1ty Z68 Professional Gen3, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Asrock Fatal1ty Z68 Professional Gen3 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Asrock Fatal1ty Z68 Professional Gen3 verständlich ist.

Eine gänzliche Bedienungsanleitung von Asrock sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Asrock Fatal1ty Z68 Professional Gen3 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Asrock Fatal1ty Z68 Professional Gen3 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Asrock Fatal1ty Z68 Professional Gen3, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Asrock Fatal1ty Z68 Professional Gen3 - die uns die ersten Schritte während der Nutzung von Asrock Fatal1ty Z68 Professional Gen3 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Asrock Fatal1ty Z68 Professional Gen3 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Asrock Fatal1ty Z68 Professional Gen3 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Asrock Fatal1ty Z68 Professional Gen3?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Asrock Fatal1ty Z68 Professional Gen3 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Asrock Fatal1ty Z68 Professional Gen3 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)