Deutsch dropdown-ico

Bedienungsanleitung Yamaha R-V303

32 Seiten 0.45 mb
Download

Zur Seite of 32

Summary
  • Yamaha R-V303 - page 1

    O WNER’S MANU AL MODE D’EMPLOI Natural Sound A V Receiver Récepteur audiovisuel R - V303 U C A ...

  • Yamaha R-V303 - page 2

    1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All oper ...

  • Yamaha R-V303 - page 3

    1 English Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practica ...

  • Yamaha R-V303 - page 4

    2 ● Indoor FM Antenna ● AM Loop Antenna ● Antenna adapter (U.S.A. and Canada models only) ● Remote Control Transmitter ● Batteries (size AA, R6, UM-3) After unpacking, check that the following parts are included. TEST — + DELAY TIME PHONO SKIP CD DISC SKIP — + A / B / C / D / E TUNER DIR A A / B TAPE VCR REC/PAUSE — + PRESET DIR B V ...

  • Yamaha R-V303 - page 5

    3 English FEA TURES ● 5 Speaker Configuration (P ower Amp. Section) Main: 50W + 50W (8 Ω ) RMS Output P ower , 0.04% THD , 20–20,000 Hz Center: 50W (8 Ω ) RMS Output P ower , 0.04% THD , 1 kHz Rear: 20W (8 Ω ) RMS Output P ower , 0.04% THD , 1 kHz ● Digital Sound Field Processor ● Dolby Pr o Logic Surround Decoder ● A utomatic Input ...

  • Yamaha R-V303 - page 6

    4 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, d ...

  • Yamaha R-V303 - page 7

    5 English Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See the illustration inside the battery compartment ...

  • Yamaha R-V303 - page 8

    6 PR OFILE OF THIS UNIT You are the proud owner of a Yamaha stereo receiver –an extremely sophisticated audio component. The Digital Sound Field Processor (DSP) built into this unit takes advantage of Yamaha’s undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instr ...

  • Yamaha R-V303 - page 9

    7 English SPEAKER SETUP SPEAKERS T O BE USED This unit is designed to provide the best sound-field quality with a 5-speaker configuration. The most effective speakers to use with this unit are main speakers, rear speakers and a center speaker. You can use only one rear speaker instead of using two rear speakers, and omit the center speaker. (Refer ...

  • Yamaha R-V303 - page 10

    8 CONNECTIONS Never plug in this unit and other components until all connections are completed. CONNECTIONS WITH O THER COMPONENTS When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L , R (right) to R , “ + ” to “ + ” and “ – ” to “ – ”. Also, re ...

  • Yamaha R-V303 - page 11

    9 English CONNECTING SPEAKERS REAR CENTER MAIN SINGLE : 8 Ω MIN. /SPEAKER DUAL :4 Ω MIN. /SPEAKER 8 Ω MIN. /SPEAKER 8 Ω MIN. /SPEAKER REAR CENTER MAIN SINGLE : 6 Ω MIN. /SPEAKER DUAL :3 Ω MIN. /SPEAKER 6 Ω MIN. /SPEAKER 4 Ω MIN. /SPEAKER SET BEFORE POWER ON CENTER MAIN REAR REAR SINGLE REAR SPEAKERS CAUTION SEE INSTRUCTION MANUAL FO ...

  • Yamaha R-V303 - page 12

    A C OUTLETS (SWITCHED) (U.S.A., Europe, Canada, China and General models) .......................................................... 2 SWITCHED OUTLETS (Australia model).................................. 1 SWITCHED OUTLET Use these to connect the power cords from your components to this unit. The power to the SWITCHED outlets is controlled by this ...

  • Yamaha R-V303 - page 13

    11 English ANTENNA CONNECTIONS ● Each antenna should be connected to the designated terminal(s) correctly, referring to the following diagram. ● Both AM and FM indoor antennas are supplied to this unit. In general, these antennas will provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer recept ...

  • Yamaha R-V303 - page 14

    12 CONTR OLS AND THEIR FUNCTIONS FR ONT P ANEL STANDBY/ON NATURAL SOUND AV RECEIVER PHONES BASS TREBLE BALANCE VOLUME 55 4 3 2 l 0 l 2 3 4 55 4 3 2 l 0 l 2 3 4 LR l6 20 28 40 60 l2 8 4 2 0 –dB 55 4 3 2 l 0 l 2 3 4 FM / AM MAN'L / AUTO FM TUNING MODE AUTO / MAN'L MONO CENTER MODE DOWN TUNING UP EFFECT MEMORY EDIT PROGRAM A / B / C / D / ...

  • Yamaha R-V303 - page 15

    13 English 7 A/B/C/D/E button Press this button to select a desired group (A–E) of preset stations. 8 Preset station number selector buttons Select a preset station number (1 to 8). 9 Tone controls These controls are effective only for the sound from the main speakers. BASS Used to increase or decrease the low frequency response. The 0 position p ...

  • Yamaha R-V303 - page 16

    14 For Contr ol of This Unit 1 Tuner keys Control tuner. + : Selects higher preset station number. – : Selects lower preset station number. A/B/C/D/E : Selects the group (A – E) of preset station numbers. 2 TEST key Used for speaker balance adjustment. (For details, refer to page 16–17.) 3 DSP program selector keys Select a DSP program. When ...

  • Yamaha R-V303 - page 17

    15 English DISPLA Y P ANEL 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected input source. 2 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 3 Signal-level meter Indicates the signal level of the received station. If ...

  • Yamaha R-V303 - page 18

    16 1 Set to the “ ∞ ” position. 2 Turn the power on. 3 Set to the “0” position. 4 5 Select the center channel output mode suitable for your speaker configuration. (Refer to “ SPEAKER CONFIGURATION ” on page 7.) On the feature of each mode, refer to the “ Note ” shown below. Note In step 5, when you select a center channel output m ...

  • Yamaha R-V303 - page 19

    17 English 6 Turn up the volume. You will hear a test tone (like pink noise) from the left main speaker, then the center speaker, then the right main speaker, and then the rear speakers, for about two seconds each. The display changes as shown below. * The test tone from the left rear speaker and the right rear speaker will be heard at the same tim ...

  • Yamaha R-V303 - page 20

    18 1 Set to the “ ∞ ” position. 2 Turn the power on. 3 Select the desired input source by using the input selector buttons. (For video sources, turn the TV/monitor ON.) * The name of the selected input source will appear on the display. 4 Play the source. (For detailed information on the tuning operation, refer to page 20.) 5 Adjust to the de ...

  • Yamaha R-V303 - page 21

    19 English 1 Select the source to be recorded. 2 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 20.) 3 Begin recording on the tape deck (or MD recorder etc.) or VCR connected to this unit. 4 If the tape deck (or MD recorder etc.) is used for reco ...

  • Yamaha R-V303 - page 22

    20 1 Select “TUNER” as the input source. 2 Select the reception band (FM or AM) confirming it on the display. 3 4 Tune to a desired station manually. * To continue tuning search, hold down the button. 1 Select “TUNER” as the input source. 2 Select the reception band (FM or AM) confirming it on the display. 3 4 To tune to a higher frequency, ...

  • Yamaha R-V303 - page 23

    21 English 1 Tune to a desired station. (Refer to the previous page for tuning procedure.) 2 Select a desired group (A – E) of preset stations confirming it on the display. 3 4 Select a preset station number where you want to program the station before the “MEMORY” indicator goes off from the display. * In the same way, program other stations ...

  • Yamaha R-V303 - page 24

    22 1 2 3 To tune to higher frequencies, press right side once. To tune to lower frequencies, press left side once. * If the TUNING button is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies. The automatic preset tuning begins from the frequency currently displayed. Received stations are programmed ...

  • Yamaha R-V303 - page 25

    23 English EXCHANGING PRESET ST A TIONS You can exchange the places of two preset stations with each other as shown below. Example) If you want to shift the preset station on E1 to A5, and vice versa. 1 Recall the preset station on E1 (by following the method of “To recall a preset station” on page 21). 2 3 Recall the preset station on A5 by fo ...

  • Yamaha R-V303 - page 26

    24 Brief Overview of Digital Sound Field Pr ograms The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. The data for these sound fields was recorded at actual locations using sophisticated sound fiel ...

  • Yamaha R-V303 - page 27

    25 English 1 Follow steps 1 – 5 shown in “ BASIC OPERATIONS ” on page 18. 2 Select the desired program that is suitable for the source. On the remote control On the front panel: transmiter: a) Turn on the DSP so that a program name lights up on the display. b) Select a desired program confirming it on the display. The selected program name is ...

  • Yamaha R-V303 - page 28

    26 If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “ SPEAKER BALANCE ADJUSTMENT ” on page 17. Note This adjustment is useful only when the digital sound field program PRO LOGIC or 3 STEREO is selected. If desired, you can adjust the sound output level of the rear speakers even i ...

  • Yamaha R-V303 - page 29

    27 English Amplifier FM AM Others Remote control transmitter If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA ...

  • Yamaha R-V303 - page 30

    28 SPECIFICA TIONS A UDIO SECTION Minimum RMS Output Power per Channel Main L, R 8 ohms, 20 Hz to 20 kHz, 0.04% THD ......................................................50W+50W Center 8 ohms, 1 kHz, 0.04% THD .....................50W Rear 8 ohms, 1 kHz, 0.04% THD ....................20W Maximum Power (EIAJ) [China and General models only] 8 ohms, ...

  • Yamaha R-V303 - page 31

    29 English AM SECTION Tuning Range [U.S.A., Canada, China and General models] .............................................530 to 1,710 kHz [ Europe and Australia models ] .............................................531 to 1,611 kHz Usable Sensitivity..............................100 µ V/m Selectivity ............................................. ...

  • Yamaha R-V303 - page 32

    YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 7731 ...

Produzent Yamaha Kategorie Stereo System

Dokumente, die wir vom Produzenten des Geräts Yamaha R-V303 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Yamaha
- Bedienungsanleitungen R-V303
- Produktkarten Yamaha
- Informationsbroschüren
- oder Energieetiketten Yamaha R-V303
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Yamaha R-V303.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Yamaha R-V303, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Yamaha R-V303. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Yamaha R-V303 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Yamaha R-V303, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Yamaha R-V303 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Yamaha R-V303 verständlich ist.

Eine gänzliche Bedienungsanleitung von Yamaha sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Yamaha R-V303 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Yamaha R-V303 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Yamaha R-V303, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Yamaha R-V303 - die uns die ersten Schritte während der Nutzung von Yamaha R-V303 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Yamaha R-V303 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Yamaha R-V303 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Yamaha R-V303?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Yamaha R-V303 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Yamaha R-V303 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)