-
ADS Technologies SNA6500 - page 1
SNA6500 User Manual 1 EN VERSION 1.0 ...
-
ADS Technologies SNA6500 - page 2
B ✔ DK ✔ E ✔ GR ✔ F ✔ IRL ✔ I ✔ L ✔ NL ✔ A ✔ P ✔ SU ✔ S ✔ UK ✔ N ✔ D ✔ CH ✔ European Regulations This product has been designed, tested and manufactured according to the European R&TTE Directive 1999/5/EC. Following this Directive, this product can be brought into service in the following states: Hereby, Philip ...
-
ADS Technologies SNA6500 - page 3
L1 L2 L3 WL On Line XDSL PWR L4 LAN1 ADSL POWER RESET ON/OFF LAN2 LAN3 LAN4 3 1 ADSL Port ADSL port (RJ-11). Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station. 3 Reset Button Use this button to reset the power ...
-
ADS Technologies SNA6500 - page 4
5 Introduction 5 About the ADSL Wireless Base Station 5 Features and Benefits 7 Installation 7 System Requirements 7 Hardware Description 7 LED Indicators 7 ISP Settings 8 Connect the System 8 Connect the ADSL Line 8 Phone Line Configuration 8 Connect the Power Adapter 9 Configuring Client PC 9 TCP/IP Configuration 9 Windows 98/Me 10 Obtain IP Sett ...
-
ADS Technologies SNA6500 - page 5
EN 5 SNA6500 Congratulations on your purchase of the Philips ADSL Wireless Base Station, hereafter referred to as the ‘ADSL Wireless Base Station’. We are proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. For those who want to surf the Internet in the most secure w ...
-
ADS Technologies SNA6500 - page 6
EN 6 Security The ADSL Wireless Base Station supports security features that deny Internet access to specified users, or filter all requests for specific services that the administrator does not want to serve. The ADSL Wireless Base Station's firewall also blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with ...
-
ADS Technologies SNA6500 - page 7
EN LAN1 ADSL POWER RESET ON/OFF LAN2 LAN3 LAN4 7 System Requirements • ADSL line installed by your Internet Service Provider. •A computer using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider. •A computer equipped with a 10/100 Mbps network adapt ...
-
ADS Technologies SNA6500 - page 8
EN 8 Connect the System The ADSL Wireless Base Station can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines: • Keep the ADSL Wireless Base Station away from any heating devices. • Do not place the ADSL Wireless Base St ...
-
ADS Technologies SNA6500 - page 9
EN 9 After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the ADSL Wireless Base Station. See: ‘Windows 98/Me’ on page 9 ‘Windows NT 4.0’ on page 12 ‘Windows 2000’ on page 14 ‘Windows XP’ on page 14 ‘Wireless adapters’ on page 17 TCP/IP Configuration To access ...
-
ADS Technologies SNA6500 - page 10
EN 10 3 In the Network window, under the Configuration tab, double-click the TCP/IP item listed for your network card. 4 In the TCP/IP window, select the IP Address tab. If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option. 5 Windows may need your Windows 98/Me CD ...
-
ADS Technologies SNA6500 - page 11
EN 11 3 In the IP Configuration window, select your network card from the drop-down menu. Click Release and then click Renew. Verify that your IP address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Wireless Base Station is functioning. Click OK to close the IP ...
-
ADS Technologies SNA6500 - page 12
EN 12 6 If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option and click ‘Apply.’ 7C lick the DNS tab to see the primary and secondary DNS servers. Record these values, and then click ‘Remove.’ Click ‘Apply’, and then ‘OK.’ 8 Windows may copy some fil ...
-
ADS Technologies SNA6500 - page 13
EN 13 4 Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the ADSL Wireless Base Station. Windows 2000 1 On the Windows desktop, click Start/Settings/Network and Dial-Up Connections. 2 Click the icon that corresponds to the connection to your ADSL Wireless Base Station. 3 The c ...
-
ADS Technologies SNA6500 - page 14
EN 14 1 On the Windows desktop, click Start/Programs/Accessories/Command Prompt. 2 In the Command Prompt window, type ‘IPCONFIG/RELEASE’ and press the ENTER key. 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These ...
-
ADS Technologies SNA6500 - page 15
EN 15 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Wireless Base Station is functioning. Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer i ...
-
ADS Technologies SNA6500 - page 16
EN 16 Disable HTTP Proxy You need to verify that the ‘HTTP Proxy’ feature of your web browser is disabled. This is so that your browser can view the ADSL Wireless Base Station's HTML configuration pages. The following steps are for Internet Explorer. Internet Explorer 1 Open Internet Explorer and click the Stop button. Click Explorer/Prefe ...
-
ADS Technologies SNA6500 - page 17
EN 17 4 Clear all the check boxes. 5 Click OK, and then click OK again to close the Internet Options window. 6 Browse to the ADSL Wireless Base station by entering http://192.168.2.1 in the URL address. ...
-
ADS Technologies SNA6500 - page 18
EN 18 Setting up the ADSL Wireless Base Station Setup Wizard Getting Started Make sure that you have a working ADSL subscription and that the ADSL wireless base station is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the light on the front of the ADSL wireless base station. The 'ASDL&apos ...
-
ADS Technologies SNA6500 - page 19
EN 19 Connection Status Step 5 shows if you have internet connection or not. If you have connection you will see the following message. If the connection failed you will see the following message. Please check that your ADSL line is active and that you've entered the correct ISP settings. ...
-
ADS Technologies SNA6500 - page 20
EN 20 Configuring the ADSL Wireless Base Station ADSL / Internet settings ADSL Status Click on ‘ADSL Status’ which is located on the left side of the screen. The left-hand side displays the main menu and the right-hand side shows descriptive information. ISP settings Enter the ATM (Asynchronous Transfer Mode) virtual connection parameters here. ...
-
ADS Technologies SNA6500 - page 21
EN 21 Security Firewall The ADSL Wireless Base Station's firewall inspects packets at the application layer, maintains TCP and UDP session information including time-outs and the number of active sessions, and provides the ability to detect and prevent certain types of network attacks. Network attacks that deny access to a network device are c ...
-
ADS Technologies SNA6500 - page 22
EN 22 Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the time schedule on this page, and apply the rule on the Access Control page. Intrusion Detection Intrusion Detection Feature Stateful Packet Inspection (SPI) and Anti-DoS firewall protection (D ...
-
ADS Technologies SNA6500 - page 23
EN 23 Wireless security Wireless Encryption To make your wireless network safe, you should turn on the security function. The ADSL Wireless Base Station supports WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected), and 802.1x security mechanisms. Access Control Access Control allows users to define the outgoing traffic permitted or not-permitted ...
-
ADS Technologies SNA6500 - page 24
EN 24 WPA Wi-Fi Protected Access (WPA) combines temporal key integrity protocol (TKIP) and 802.1x mechanisms. It provides dynamic key encryption and 802.1x authentication service. 802.1X If 802.1x is used in your network, then you should enable this function for the ADSL Wireless Base Station. These parameters are used for the ADSL Wireless Base St ...
-
ADS Technologies SNA6500 - page 25
EN 25 Home network settings Status The Status page displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clicking ‘Save’ and choosing a location. Network settings Use the Hom ...
-
ADS Technologies SNA6500 - page 26
EN 26 WDS If the signal strength of a single wireless base station is not sufficient due to a large coverage area or attenuation due to walls, with WDS the range of a wireless base station can be extended. All base stations in a Wireless Distribution System must be configured with the same radio channel, and encryption type (WEP / WPA) if that is u ...
-
ADS Technologies SNA6500 - page 27
EN 27 Advanced settings NAT Network Address Translation allows multiple users to access the Internet sharing one public IP. Address Mapping Allows one or more public IP addresses to be shared by multiple internal users. This also hides the internal network for increased privacy and security. Enter the Public IP address you wish to share into the Gl ...
-
ADS Technologies SNA6500 - page 28
EN 28 Maintenance Use the Maintenance menu to backup the current configuration, restore a previously saved configuration, restore factory settings, update firmware, and reset the ADSL Wireless Base Station. Configuration Tools Choose a function and click Next. Backup allows you to save the ADSL Wireless Base Station's configuration to a file. ...
-
ADS Technologies SNA6500 - page 29
EN 29 WARNING! When you reset the ADSL wireless base station using the blue reset button all configuration settings will be lost, also your ISP settings. Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum ...
-
ADS Technologies SNA6500 - page 30
EN 30 UPNP (Universal Plug and Play) settings With Universal Plug and Play, a device can automatically dynamically join a network, obtain an IP address, communicate its capabilities, and learn about the presence and capabilities of other devices. Devices can then directly communicate with each other. This further enables peer-to-peer networking QoS ...
-
ADS Technologies SNA6500 - page 31
EN 31 Routing These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. Static route parameter 1C lick ‘Add’ to add a new static route to the list. 2 Click ‘Save Settings’ to save the configuration. RIP parameter RIP sends routing-update messages at regular intervals and when t ...
-
ADS Technologies SNA6500 - page 32
EN 32 Windows 98/ME Click Start/Run. Type ‘winipcfg’ and press ‘ENTER’. The MAC address is in the ‘Adapter Address’ section. Windows NT4/2000/XP Click Start/Programs/Command Prompt. Type ‘ipconfig /all’ and press ‘ENTER’. The MAC address is listed as the ‘Physical Address.’ Macintosh Click System Preferences/Network. The MAC ...
-
ADS Technologies SNA6500 - page 33
EN 33 Double-click the ‘Network and Internet connections’ icon. Click in the list to the left on ‘Setting-up a home network or small business network’. The Wizard Network Setup appears. Click ‘Next’ to continue. Wizard Network Settings 1. Please, carefully read the instructions the Wizard gives you, and adapt your choices to the type of ...
-
ADS Technologies SNA6500 - page 34
EN 34 1. Enter a description that helps you recognize the computer. 2. Enter a name that is different for each computer. 3. Click ‘Next’ to continue. Enter the same workgroup name for all computers in the network, then click ‘Next’ to continue. Choose to make a networking setup disk. Then click 'Next'. Click ‘Finish’ to close ...
-
ADS Technologies SNA6500 - page 35
EN 35 To explore the network: Double-click the Network Environment icon on the desktop. If you need more information, consult Windows Help. For Windows 98SE and Windows Me. See earlier on in this chapter for Windows XP and Windows 2000. Click the Windows Start button, click ‘Settings’, and click ‘Control Panel’ from the list. Double-click t ...
-
ADS Technologies SNA6500 - page 36
EN 36 1. Enter a name that is different for each computer. 2. Enter the same workgroup name for all computers in the network. 3. Enter a description that helps you recognize the computer. 4. Click on the ‘Configuration’ tab to continue. Click the ‘Sharing files and printers’ button. Select the access options you want, and click ‘OK’ to ...
-
ADS Technologies SNA6500 - page 37
EN 37 Click ‘OK’ to accept the changes. To share folders with the network: Start Windows Explorer and right-click the folder you wish to share with the network. Click the ‘Sharing’ tab and adapt the settings. To explore the network: Double-click the Network Environment icon on the desktop. If you need more information, consult Windows Help. ...
-
ADS Technologies SNA6500 - page 38
EN 38 Troubleshooting This section describes common problems you may encounter and possible solutions to them. The ADSL Wireless Base Station can be easily monitored through panel indicators to identify problems. Problem Solution Power LED is Off • Check connections between the ADSL Wireless Base Station, the external power supply, and the wall o ...
-
ADS Technologies SNA6500 - page 39
EN 39 Physical Characteristics Ports – Four 10/100Mbps RJ-45 Ports – One ADSL RJ-11 ADSL Features – Supports DMT line modulation – Supports Annex A Full-Rate ADSL: up to 8 Mbps downstream, up to 1 Mbps upstream (G.992.1 &T1.413, Issue 2) – Supports G.Lite ADSL: up to 1.5 Mbps downstream, up to 512 Kbps upstream – Dying GASP support ...
-
ADS Technologies SNA6500 - page 40
EN 40 Sensitivity Modulation Rate- Receiver 2.412 ~ 2.484 HGz Sensitivity (dBm) 802.11b - 1Mbps - (90 dBm) 802.11b - 2Mbps - (88 dBm) 802.11b - 5.5Mbps - (85 dBm) 802.11b- 11Mbps - (84 dBm) Modulation Rate-Receiver Sensitivity Typical (dBm) 802.11g - 6Mbps - (88 dBm) 802.11g - 9Mbps - (87 dBm) 802.11g - 12Mbps - (84 dBm) 802.11g - 18Mbps - (82 dBm) ...
-
ADS Technologies SNA6500 - page 41
AQ95-56F-592KR-2 nd (report No.) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics B.V., P&A CC: Building SBP6 (manufacturer's name) P.O.Box 80002, 5600 JB Eindhoven, The Netherlands (manufacturer's address) declare under our responsibility that the electrical product: Philips SNA6500 -/00 -/05 (name) (type or m odel) ADS ...
Haben Sie eine Frage bezüglich ADS Technologies SNA6500?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ADS Technologies SNA6500 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ADS Technologies SNA6500 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.