-
Advantech ADAM-4500 - page 1
ADAM - 4500 PC - based Communication Controller User's Manual Copyright Notice This document is copyrighted, 1997, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduce d, copied, tr ...
-
Advantech ADAM-4500 - page 2
Part No. 2050500110 1 st Edition Printed in Taiwan July 1997 Table of Contents Chapter 1 General Information 1 1.1 Introduction 1 1.2 Features 1 1.3 Specifications 2 1.4 System Diagram 3 Chapter 2 Installation Guidelines 5 2.1 System Requirements to Setup ADAM - 4500 5 2.2 Steps to Successfully Setup the System 5 Step 1: Review the requirements 5 S ...
-
Advantech ADAM-4500 - page 3
Chapter 3 Programming and Downloading 1 1 3.1 Programming 1 1 Mini BIOS functions 1 1 Converting P rogram Codes 1 1 Other limitations 1 2 Programming the Watchdog timer 1 2 Interrupt types 1 3 Memory Mapping 1 3 3.2 Downloading and transferring 1 4 Install Utility Software on Host PC 1 4 Preparing the ALLFILE directory 1 4 Downloading into flash RO ...
-
Advantech ADAM-4500 - page 4
Step 2:Connect the cables 1 6 Step 3:Convert and download codes to flash ROM 1 7 Step 4:Power on ADAM - 4500 to complete the application 1 7 Chapter 4 Function Library 1 8 Appendix A Register Structure 3 0 Appendix B Safety Instructions 32 Chapter 1 General Information 1.1 Introduction The ADAM - 4500 is a fully functional standalone controller, de ...
-
Advantech ADAM-4500 - page 5
The controller also includes a real - time clock and a watchdog timer function. The real - time clock ensures time recording while events occur. The watchdog timer is designed to automatically reset the microprocessor when the system fails. This feature greatl y reduces the level of maintenance required and makes the ADAM - 4500 ideal for use in ap ...
-
Advantech ADAM-4500 - page 6
Mechanical ?? Case: ABS with captive mounting hardware ?? Plug - in screw terminal block: Accepts 0.5 mm 2 to 2.5 mm 2 , 1 - #12 or 2 - #14 to #22 AWG Environment ?? Operating temperature: - 10 to 70°C (14 to 158°F) ?? Storage temperature: - 25 to 70°C ( - 13 to 158°F) ?? Humidity: 5 to 95 %, non - condensing 1.4 System Diagram ADAM - 4500 Figu ...
-
Advantech ADAM-4500 - page 7
Function Block Diagram SRAM FLASH ROM RTC WDT&Reset 16 Bit up Power Converter COM#1 UART COM#2 UART RS-485 Tranceiver RS232/485 Tranceiver Programming Port Tranceiver GND +5V +5V GND +10V to 30Vdc Figure 1 - 2: ADAM - 4500 Function Block Diagram Chapter 2 Installation Guidelines This chapter provides guidelines to set up and install the ADAM - ...
-
Advantech ADAM-4500 - page 8
into the ADAM - 4500, can function as the host computer. Power supply For ease of use in industrial environments, the ADAM - 4500 will accept industry standard +24 V DC unregulated power. The ADAM - 4500 was designed to operate using any power supply voltage between +10 and +30 V DC . Power ripples must be limited to 5 V peak to pe ak while the vol ...
-
Advantech ADAM-4500 - page 9
RS-232 Red White Black Female DB-9 Host PC (RS-232 PC) RS-232 Male DB-9 HOST PC DOWNLOAD CABLE and ADAM-4500 Figur e 2 - 2: Download Cable Connections Step 3: Run utility software in host computer Together with the ADAM - 4500 you will find a utility disk containing an ADAM4500.EXE file. This file is a menu - driven software utility provided for do ...
-
Advantech ADAM-4500 - page 10
PC, then press <enter>. The Baudrate is set to a default value of 5 7600 bps and cannot be changed. The screen is as shown in figure 2.4. Figure 2 - 4: Select Communication Port Step 4: Power on ADAM - 4500 Highlight the "Terminal" option, then press <enter>. Power on the ADAM - 4500. After 5 seconds, the screen shown in figur ...
-
Advantech ADAM-4500 - page 11
Figure 2 - 5: Emulating Screen of ADAM - 4500 2.3 Jumper Setting We designed the ADAM - 4500 with ease - of - use in mind. It has three jumper settings. The following sections explain how to configure the module. You may want to refer to the figure below for help in identifying card components. The following diagram shows th e locations of the jump ...
-
Advantech ADAM-4500 - page 12
The ADAM - 4500 has a DB - 9 pin connector as its RS - 232 port connector. Since the connection for an RS - 232 interface is not standardized, different devices implement the RS - 232 con nection in different ways. If you are having problems with a serial device, be sure to check the pin assignments for the connector. The following table shows the ...
-
Advantech ADAM-4500 - page 13
mini BIOS of ADAM - 4500 o nly provides 10 function calls. Since the user's program can not use other BIOS function calls, the ADAM - 4500 may not work as intended. Additionally, certain language compilers such as QBASIC directly call BIOS functions that are not executable in ADAM - 450 0. The ADAM - 4500 mini BIOS function calls are listed in ...
-
Advantech ADAM-4500 - page 14
Figure 3 - 1: Converting Program Codes Other Limitations 1. The ADAM - 4500 does not support the standard PC function "8253". Therefore, the C language function call "delay ( )" cannot be used in ADAM - 4500 applications. 2. Certain critical files are always kept in flash ROM, such as the operating system files, B IOS, and monit ...
-
Advantech ADAM-4500 - page 15
The following table shows the memory mapping of the ADAM - 4500 controller. 0xF8000 -- 0xFFFFF Monitor program 0xF6C00 -- 0xF7FFF Mini BIOS 0xCC000 Start of Application ROM Disk (about 171 K) 0xC0000 Start of ROM - DOS (about 48 K) 0x40000 -- 0xBFFFF No Use 0x00400 -- 0x3FFFF SRAM area 0x00000 -- 0x003FF System area 0x003F8 -- 0x003FF COM1 0x002F8 ...
-
Advantech ADAM-4500 - page 16
executing, select the COMport of the host PC that has been connected to ADAM - 4500. Then select "Program" from the bar menu and press <enter> to begin downloading. The screen shown in figure 3 - 2 will appear. Figu re 3 - 2: Program downloading Follow the instructions shown on the screen. Power off the ADAM - 4500 and then re - pow ...
-
Advantech ADAM-4500 - page 17
Figure 3 - 3: Download Complete Transferring files to SR AM (ADAM - 4500's D - drive) The ADAM - 4500 provides 234 KB of free SRAM for use in program operation, and as working memory space in the event you want to test your system control logic or simulate system performance before downloading the execution code to t he flash ROM. You can tran ...
-
Advantech ADAM-4500 - page 18
Step 3: Convert a nd download codes to flash ROM Within the host computer, convert the application program into 80186 or 80188 compatible code. Create an AUTOEXEC.BAT file for the application program and write the application program's name in the AUTOEXEC.BAT file. Also create COMMAND.COM and CONFIG.SYS files for the application program. Load ...
-
Advantech ADAM-4500 - page 19
Syntax: int comm_init(int buf_size) Function description: Initializes the communication port and interrupt routine before other function calls use the communication port. Parameter Description int buf_size Sets the buffer size of every communication port for storage of received data. The unit of size is bytes. Return: Returns a 1 if command succeed ...
-
Advantech ADAM-4500 - page 20
int stop Stop bits setting 1, 2 (stop bit = 1 is for data bits = 5,6,7, or 8) (stop bit = 2 is for data bits = 6,7, or 8) For details, refer to RS - 232 chip set data book int cmd_type Received data format setting. 0: single byte mode. The data format is a single byte character. User can use comm_get_rec_datas to receive single byte data. 1: comman ...
-
Advantech ADAM-4500 - page 21
data buffer ( Use comm_int function call ). Before exiting program, user must free this buffer ( Use comm_exit function call ). unsigned char port Specifies communication port (COM1 or COM2) 1: COM1 port 2: COM2 port Return: Returns a 1 if command succeeds. Returns a 0 if it fails. comm_get_rec_str Syntax: int comm_get_rec_str(unsigned char **data, ...
-
Advantech ADAM-4500 - page 22
Function Description: LED ON/OFF control Parameter Description int type 0: LED OFF 1: LED ON wdt_enable Syntax: wdt_enable() Function Description: This function enables the watchdog timer function. After a user calls this function, the user must call the wdt_clear() function to refresh the watchdog timer; otherwise the CPU resets, or a non - maskab ...
-
Advantech ADAM-4500 - page 23
BASE+0 Receiver buffer register when DLAB=0 and the operation is a read. BASE+0 Transmitter holding register when DLAB=0 and the operation is a write. BASE+0 Divisor latch bits 0 - 7 when DLAB=1 BASE+1 Divisor latc h bits 8 - 15 when DLAB=1. The two bytes BASE+0 and BASE+1 together form a 16 - bit number, the divisor, which determines the baud rate ...
-
Advantech ADAM-4500 - page 24
BASE+4 Modem Control Register (MCR) bit 0 DTR bit 1 RTS BASE+5 Line Status Register (LSR) bit 0 Receiver data ready bit 1 Overrun error bit 2 Parity error bit 3 Framing error bit 4 Break in terrupt bit 5 Transmitter holding register empty bit 6 Transmitter shift register empty bit 7 At least one parity error, framing error or break indication in th ...
-
Advantech ADAM-4500 - page 25
e. The equipment has dropped and damaged. f. If the equipment has obvious sign of breakage. 15.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE BELOW - 20° C ( - 4° F) OR ABOVE 60° C (140°F), IT MAY DAMAGE THE EQUIPMENT. The sound pressure level at the operators position according to IEC 704 - 1:1982 is equal to ...
Haben Sie eine Frage bezüglich Advantech ADAM-4500?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Advantech ADAM-4500 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Advantech ADAM-4500 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.