-
Dell 7000 Series - page 1
Stackin g Dell P owerCon n ect 7000 Series S witches A Dell Te chni c a l Whit e Pa per www.dell.com • su pport.dell. com ...
-
Dell 7000 Series - page 2
Stacking Dell PowerConnec t 70 00 S eries Switches Page ii THIS WHITE PAPER IS FOR I NFORMATIONAL PURPOSES ONLY , AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL IN ACCURACIES. THE CONTENT IS PROVID ED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTI ES OF ANY KIND. © 2011 Dell Inc. A ll rights reserve d. Reprod uction of this material in any ma nner ...
-
Dell 7000 Series - page 3
Stacking Dell PowerConnec t 70 00 S eries Switches Page 1 Contents Introd uction ................................................................................................................ 2 Applicab ility ............................................................................................................. 2 Stack ing and Ma nagem ent ...
-
Dell 7000 Series - page 4
Stacking Dell PowerConnec t 70 00 S eries Switches Page 2 Introduct ion This whi te paper explains t he purpo se and ope ration of the sta cking feat ure in t he Dell ™ PowerCo nnect™ 7000 Seri es Gig abit Ether net switch es. The PowerCon nect 7000 serie s is Dell’s m ost advanced switc hing product l ine, offer ing advanced switchin g capab ...
-
Dell 7000 Series - page 5
Stacking Dell PowerConnec t 70 00 S eries Switches Page 3 require d for reconf igurat ion. Additi on al stack members can im mediately utiliz e existing configur ation information such as routin g and switching con figurations, VLANs, ACLs, por t profi les, and s ecurity certifi cates. Stackin g a n d Perf or mance For si tuations where ther e is a ...
-
Dell 7000 Series - page 6
Stacking Dell PowerConnec t 70 00 S eries Switches Page 4 # Figure 2 shows a recomm ended s tacking config uration w ith dua l stack ing mod ules on ea ch swi tch. Eac h swit ch connect s to ano ther w ith 128 Gbps of t otal ba ndwidth (4 ports @ 16 Gbps Tx and Rx each) . Note that in t he recomm ended c onfigura tion, the dual sta cking ca bles fr ...
-
Dell 7000 Series - page 7
Stacking Dell PowerConnec t 70 00 S eries Switches Page 5 Mixing M6 348 and PC70 00 Series Swit ches in a Stack PC700 0 series a nd M6348 can be use d interc hang eably in a sta ck of up to 12 unit s. As wi th PC 7000 - serie s only stacks, all switches in a mixed st ack must have the same f irmware ver sion. Starting with the 4.1.0. 6 software rel ...
-
Dell 7000 Series - page 8
Stacking Dell PowerConnec t 70 00 S eries Switches Page 6 members of the st ack can be powered o n seque ntially by powering up the sw itch adja cent to the last swit ch powered o n. A stack of u nits is man aged and ac ts as a singl e entity when the units ar e connec ted togethe r and are operat ional. I f a unit cannot de tect a stack ing par tn ...
-
Dell 7000 Series - page 9
Stacking Dell PowerConnec t 70 00 S eries Switches Page 7 Initial Installat ion and Power - up of a St ack Follow t hese inst ructions to cr eate a st ack: NOTE: Install units in a r ac k when ever po ssible to prevent t he units and cab les from being dis turbed. 1. Instal l all stacki ng cable s. Fully conn ect all cabl es, includ ing the re dund ...
-
Dell 7000 Series - page 10
Stacking Dell PowerConnec t 70 00 S eries Switches Page 8 Select ing the Master Unit A stack man ager is el ected or re - el ecte d based on t he fol low ing con sider ations, in or der: • Whether t he switch that was previou sly the st ack manager. • Whether t he sw itch has the high er MAC a ddress . When a switch is add ed to the st ack, one ...
-
Dell 7000 Series - page 11
Stacking Dell PowerConnec t 70 00 S eries Switches Page 9 To configu re the standby unit v ia the W eb interfac e, view the Stacking > Unit C onfiguration page an d select St andby fo r the Uni t Type . Updating t h e Firmware on a Stack Automat ic Update By defau lt, firmw are sync hronizat ion is pe rformed au tomati cally when a unit is power ...
-
Dell 7000 Series - page 12
Stacking Dell PowerConnec t 70 00 S eries Switches Page 10 4. Reload t he stack command . This res ets the entire sta ck. The s witches stop forw arding d uring the reset . 5. When th e stack ha s reload ed, check t he runni ng firm ware versio n using t he show version command. Check that all stack me mbers have joined the stack usin g the show st ...
-
Dell 7000 Series - page 13
Stacking Dell PowerConnec t 70 00 S eries Switches Page 11 Mode........................................... FTP FTP Server IP.................................. 10.27.64.141 FTP Path....................................... FTP Filename................................... PC7000_4.0.0.6.stk Data Type...................................... Code Destinatio ...
-
Dell 7000 Series - page 14
Stacking Dell PowerConnec t 70 00 S eries Switches Page 12 To perfor m the sa me confi guration by using th e Web i nterface, use the fol lowing steps: 1. From t he Switching > VLAN > VLAN Membership pag e, clic k Add . 2. From the Ad d VLAN page, ente r 1000 in th e VLAN ID field an d click Ap ply . 3. From the Ports me nu on th e Switch ing ...
-
Dell 7000 Series - page 15
Stacking Dell PowerConnec t 70 00 S eries Switches Page 13 5. From the Show VL AN menu o n the Sw itching > VLAN > VLAN Me mbership page, sel ect 1000 . 6. Click the Static box for port 17 so t hat th e let ter U (untag ged) appea rs in the box. 7. Click Apply . 8. Navigate to the Routing > I P > IP Interf ace Confi guration page. ...
-
Dell 7000 Series - page 16
Stacking Dell PowerConnec t 70 00 S eries Switches Page 14 9. In the I nterf ace fi eld, sele ct VLAN 1 000 . In the R outing Mode fiel d, select Ena bl e . In the IP Address Configura tion Method fi eld, s elect Manual. In t he IP Address fiel d, en t er 1 92.168.21. 11. In the S ubnet Mask field , ent er 255.255.255.0. Click Apply . 10 . Navigate ...
-
Dell 7000 Series - page 17
Stacking Dell PowerConnec t 70 00 S eries Switches Page 15 11 . Clic k Apply . 12 . Navigate to the Syste m > Manag emen t Secu rity > A ccess Profi le pag e. Choo se the A ccess Profi le tab. E nabl e th e Set Activ e Access Prof ile c heck box in the MGMT_VLA N Access Prof ile and clic k Apply. ...
-
Dell 7000 Series - page 18
Stacking Dell PowerConnec t 70 00 S eries Switches Page 16 Adding a Stack M ember with Minimal I n te rrupt ion When addi ng a new memb er to a sta ck, make s ure th at only the s tack ca bles an d no host - facing network cables a re connec ted befo re poweri ng up the n ew unit. Ma ke sur e the end - user link s are no t connect ed to any ports o ...
-
Dell 7000 Series - page 19
Stacking Dell PowerConnec t 70 00 S eries Switches Page 17 Removin g a Stack Member with Min imal Interruption NOTE: This migration pr ocess can be d isruptive, so sche dule some outage time. To minimize any disrupti on, plan on having one or mor e test sc enarios prepared in o rder to verify that the migrated ports a re operati ng proper ly . 1. M ...
-
Dell 7000 Series - page 20
Stacking Dell PowerConnec t 70 00 S eries Switches Page 18 Merging T wo O per atio na l Stack s The reco mmended procedu re for mergi ng two op erati onal stack s is as follow s: Caution! Thi s procedu re is dis ruptive a nd requir es a netwo rk outage . 1. Always p ower off all unit s in one stac k before connec ting to anoth er stack. 2. Add the ...
-
Dell 7000 Series - page 21
Stacking Dell PowerConnec t 70 00 S eries Switches Page 19 If PoE is enabled o n a swit ch port sho rtly befo re a mas ter failov er and the ha rdware s tatus c hange had not yet been comm unicat ed to the backup uni t, the s witch wi ll conti nue to prov ide PoE po wer ev en though PoE is no t enab led fo r the port i n the c onfigur ation o n the ...
-
Dell 7000 Series - page 22
Stacking Dell PowerConnec t 70 00 S eries Switches Page 20 console#show switch Management Standby Preconfig Plugged - in Switch Code Switch Status Status Model ID Model ID Status Version ------ ---------- - ------------ --------- ----------- ----- - ------ -------- 1 Stack Mb r Standby PCT7048 PCT7048 OK 4.0.0.6 2 Unassigned PCT7048 Not Present 0.0 ...
-
Dell 7000 Series - page 23
Stacking Dell PowerConnec t 70 00 S eries Switches Page 21 Scenario 3 The foll owing example contain s a similar con dition with a master unit fai lover and c onseq uent sta ck split with five units in the stack, as # Figure 5 shows. Figure 5. Stack Sp lit with Manager F ailure In this exampl e, there i s no li nk back t o Swit ch 5 fro m Switch 1 ...
-
Dell 7000 Series - page 24
Stacking Dell PowerConnec t 70 00 S eries Switches Page 22 Nonstop Fo rwarding A swit ch can be des cribed i n terms of three se mi - in dependent f unctions called t he forwar ding plan e, the co ntrol plane , and th e managem ent plan e: • Forwarding Plane — The set of hardwa re compo n ents that for ward d ata packets witho ut interv entio n ...
-
Dell 7000 Series - page 25
Stacking Dell PowerConnec t 70 00 S eries Switches Page 23 To tak e full adva ntage of n onstop f orwarding , layer 2 connecti ons to nei ghbors s hould be vi a port channel s that span tw o or more stac k units, and layer 3 rou tes shoul d be e qual -c ost m ulti - p ath ( ECMP ) routes . ECM P prov ides load ba lan ci ng, using m ulti ple next ho ...
-
Dell 7000 Series - page 26
Stacking Dell PowerConnec t 70 00 S eries Switches Page 24 Figure 6. Nonstop Forwarding Example 1 2 3 Host 1 Host 2 Host 3 Switch 1 Switch 2 Route r 1 Video stream OSPF PIM - SM Spanni ng Tree IGMP VLAN 10 VLAN 20 192.168.5. 100 192.168.20. 100 192.168.20. 101 ...
-
Dell 7000 Series - page 27
Stacking Dell PowerConnec t 70 00 S eries Switches Page 25 NSF Sce nario Configurati on via CLI Router 1: configure terminal hostname Router_1 ip multicast ip pim rp - address 192.168.10.1 239.0.1.1 255.255.255.0 ip pim sparse vlan database vlan 10 exit interface vlan 10 ip address 192.168.10.1 255.255.255.0 ip pim exit router ospf router - id 1.1. ...
-
Dell 7000 Series - page 28
Stacking Dell PowerConnec t 70 00 S eries Switches Page 26 Stack : configure terminal vlan database vlan 10,20 exit vlan 10 name “Routed interface to PIM RP via port - channel 1” exit vlan 20 name “Routed interface to downstream switched network” exit hostname "nsf - stack" spanning - tree mode rst ip igmp ip pim sparse ip multica ...
-
Dell 7000 Series - page 29
Stacking Dell PowerConnec t 70 00 S eries Switches Page 27 exit interface gi2/0/10 no spanning - tree auto - portfast channel - group 1 mode auto exit interface gi2/0/20 switchport mode general switchport general pvid 20 switchport general acceptable - frame - type tagged - only switchport general allowed vlan add 20 tagged switchport general allow ...
-
Dell 7000 Series - page 30
Stacking Dell PowerConnec t 70 00 S eries Switches Page 28 interface gi1/0/5 switchport mode general switchport general pvid 20 switchport general acceptable - frame - type tagged - only switchport general allowed vlan add 20 tagged switchport general allowed vlan remove 1 exit exit Switc h 2 configure terminal hostname Switch -2 vlan database vlan ...
-
Dell 7000 Series - page 31
Stacking Dell PowerConnec t 70 00 S eries Switches Page 29 NSF Example 1 A ssume U nit 1 is the s tack m anager a nd Unit 2 is the standby switch. The following sce narios illu strate how the network r ecovers when Unit 1 is powe red dow n. • With NSF dis abled : Unit 2 takes over as m anager wit h a cold rest art and clears the hardwar e tables ...
-
Dell 7000 Series - page 32
Stacking Dell PowerConnec t 70 00 S eries Switches Page 30 NSF Re - convergence Timing As menti oned in t he previo us sectio n, NSF pro tects ag ainst f ailures by c heck - pointing information to a standb y unit . In an NSF - protect ed stack , the wo rst - case s cenario is when the master u nit fai ls. The followin g statistics show rep resenta ...
-
Dell 7000 Series - page 33
Stacking Dell PowerConnec t 70 00 S eries Switches Page 31 Small Configuration • 6 switche s stacked • 4 VLANs, all por ts are m embers of all VLANs • 2/2 static/dyn amic l ags with 8 me mbers each • 1 MSTP instance with VLAN s • 15 ACLs ap plie d on 15 in terfaces • 5 Diffs e rv servic e interface s with po licies on 5 interfa ces • ...
-
Dell 7000 Series - page 34
Stacking Dell PowerConnec t 70 00 S eries Switches Page 32 Stacking W eb Interface T he stack ing co nfigurat ion a nd monitori ng Web pages are acc essed from t he Syst em > St ack Manageme nt menu. The fol lowing im age shows a l ist of the Web pages that ar e availabl e for the stacking featu re. Summary This pap er has des cribed t he theory ...
Haben Sie eine Frage bezüglich Dell 7000 Series?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Dell 7000 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Dell 7000 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.