-
Magnadyne X9 - page 1
Owner’ s Manual Model: X9 For T echnical Assistance, please call (800) 638-3600, or vi si t w ww.magnadyne.com ...
-
Magnadyne X9 - page 2
Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product and years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Ma ...
-
Magnadyne X9 - page 3
3 2-Way LCD Remote LCD Display Icons 1-Way Remote The LCD screen on the 2-way remote control displays graphic icons. It provides visual information on any trigger of the sensors and around the clock surveillance of your vehicle, as well as displaying the present status of the system. SAVE 4 4 Door Lock Vehicles Doors are Locked Door Unlock Vehicles ...
-
Magnadyne X9 - page 4
4 T ransmitter Button System Function Remark Lock Doors & Arms System Car Locator Upon Armed Arm and Delete the 2-Stage Shock Sensor Press T wice within 3 Seconds Silent Arming/Disarming Ignition in “OFF” Position Active Anti-Car Jacking Mode Ignition in “ON” Position, Press and Hold for 2 Seconds Channel #4 Timer Control Output Unlock ...
-
Magnadyne X9 - page 5
Vibration/Melody Mode This mode is useful when you are in a noisy place and it is difficult to hear the beep from the transmitter . While in the Vibration/Melody Mode, the transmitter will vibrate if your security system has been activated. 1. Press and hold the and buttons at the same time until one long beep is heard. Programming has now been ent ...
-
Magnadyne X9 - page 6
Press Buttons at the Same Time: Then Press Button Within: System Function 5 Sec. Switching to 2nd Vehicle or Returning to 1st Vehicle Operation 5 Sec. Melody / Vibration Mode 5 Sec. Power Save Mode LCD Screen Lamp T urns On for Five Seconds 3 Sec. System Status Check 3 Sec. Clear the Flash Icon and Melody Sound 6 + + + + + The LCD remote control is ...
-
Magnadyne X9 - page 7
7 Flash Function 1 Flash System is Armed 2 Flashes System is Disarmed 3 Flashes Disarmed / T riggered 3 or 6 Flashes Car Locator Constant On or Flashing Under Remote Start Chirp Function 1 Chirp System is Armed 2 Chirps System is Disarmed 3 Chirps Ajar Warning 4 Chirps Disarm / T riggered 2,3,6 Chirps Progressive Car Locator Siren/Horn LED Doors St ...
-
Magnadyne X9 - page 8
8 1. Press the button on the transmitter . 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. Ajar Warni ng: If the siren sounds 3 chirps, then you have left a door , trunk, or hood lid ajar . Silent Arming/Disarmin ...
-
Magnadyne X9 - page 9
9 Automatic Arming Bypass While the system is in Disarmed Mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. T o exit this mode press the or buttons and the system will return to normal status. 1. Press the button on the trans ...
-
Magnadyne X9 - page 10
10 Manual valet mode allows you to bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. This mode is also a necessity if your transmitters become in-operable. When the system is in Valet Mode, all alarm functions and remote start functions are off. However , the remote panic feature and ...
-
Magnadyne X9 - page 11
The transmitter can be used as a remote panic switch to manually trigger the alarm system in case of an emergency . 1. Press and hold the button for 3 seconds to enter the Panic Mode (horn/siren will start to sound and parking lights will flash). 2. While in Panic Mode the transmitter and buttons can be used to lock and unlock the door (if that opt ...
-
Magnadyne X9 - page 12
12 Driver Paging / Lost and Found is useful the event that someone wants to page the driver of the parked vehicle, or someone cannot find the LCD transmitter . With the ignition switch in the “OFF” position, press and hold the valet switch for 2 seconds to page the driver . One chirp shall be emitted and the paging melody continues sounding fro ...
-
Magnadyne X9 - page 13
13 If the Out-of-Range Indication feature is activated the system will automatically check the range every 30 minutes after armed. 1. If the user is within the range, the icon will display on the LCD screen. 2. If user is out of range, the icon will disappear from the LCD screen and the transmitter will beeps 5 times. Note: Activating this feature ...
-
Magnadyne X9 - page 14
14 This feature allows the vehicle to remain running after the key has been removed from the ignition. It is useful on occasions when you wish to exit and lock the vehicle for a short period of time, but keep the engine running allowing the climate controls to stay on. 1. Before turning the engine off with the ignition key , press the button twice. ...
-
Magnadyne X9 - page 15
15 When the engine is running by remote start and you wish to shut it off, follow these steps: 1 . While in Remote Start Mode, press the button twice on the remote transmitter . 2 . Move the optional remote start toggle switch to the “OFF” position (if installed). 3. Press the vehicle’ s brake pedal, the engine will stop running and the parki ...
-
Magnadyne X9 - page 16
16 If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake pedal is pressed. 3. The hand brake is released (for Standard T ransmission vehicles only). 4. Engine is over -revved (T achometer Checking T ype only). 5. The preprogrammed run time ...
-
Magnadyne X9 - page 17
Return to First Car Operation (LCD Remote Only) 1. Press and hold and buttons at the same time until one long beep is heard. Programming Mode has now been entered. Note: No action for five seconds will generate two long beeps indicating the Programming Mode has been exited. 2. Within 5 seconds, press and hold the button until two beeping sounds are ...
-
Magnadyne X9 - page 18
18 1-Way Remote for the X9 Security System X7 RF 59.95 ea. SAVE 4 4 2-Way LCD Remote for the X9 Security System X4RF-LCD 139.95 ea. TRANSMITTERS DESCRIPTION MODEL # $ PRICE REPLACEMENT BATTERIES 1.5 Volt AAA Alkaline Battery commonly found in grocery stores, hardware stores, etc. CR2032 - 3 Volt Lithium Battery (1 pc.) Models: Radio Shack: #23-162 ...
-
Magnadyne X9 - page 19
Credit Card or Money Order Only (Sorry No Cash, C.O.D. or personal checks accepted) SHIP TO: (No P .O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY ST ATE ZIP CODE DA Y TIME PHONE NUMBER PAR T # DESCRIPTION QTY . PRICE EACH TOT AL Sales Subtotal = ________ . ______ California Residents Add Sales T ax ...
-
Magnadyne X9 - page 20
X9-UM 07-23-08 Rev. A © Copyright 2008/ 2009 Magnadyne Corporation Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser , repair , replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its author ...
Haben Sie eine Frage bezüglich Magnadyne X9?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Magnadyne X9 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Magnadyne X9 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.