Bedienungsanleitung Cisco Systems CISCO881SECK9

58 Seiten 0.45 mb
Download

Zur Seite of 58

Summary
  • Cisco Systems CISCO881SECK9 - page 1

    Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco 880 Series Integrated Services Router Software Configuration Guide Text Part Number: OL-22206-01 ...

  • Cisco Systems CISCO881SECK9 - page 2

    THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATI ON, AND RECOMM ENDATIONS IN THIS MA NUAL ARE BE LIEVED TO BE ACCURATE BUT ARE PRESEN TED WITHOU T WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUS T TAKE FULL RESPONSI BILITY FOR THEIR APPLICAT IO ...

  • Cisco Systems CISCO881SECK9 - page 3

    xiii Cisco 880 Series In tegrated Services Router Software Configuration Guide OL-22206-01 Preface This preface describes the objectiv es, audience, organization , and conventions used in this guide, and describes related docu ments that have additi onal in formation. It contains the f o llowing sections: • Objective, page xii i • Audience, p a ...

  • Cisco Systems CISCO881SECK9 - page 4

    xiv Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Preface Organization This guide is or ganized into the foll owing parts, chapters, and appendixes. Conventions These documents use the conventions listed in Ta b l e 1 to convey instructions and information. Note Means reader take note . Notes contain helpful ...

  • Cisco Systems CISCO881SECK9 - page 5

    xv Cisco 880 Series In tegrated Services Router Software Configuration Guide OL-22206-01 Preface Tip Means the following informa tion will help you sol v e a pr oblem . The tips information might n ot be troubleshooting or even an action, b ut could be useful information, si milar to a T imesaver . Related Documentation In addition to Cisco 880 Ser ...

  • Cisco Systems CISCO881SECK9 - page 6

    xvi Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Preface T o search a PDF document i n Adobe Read er , use the basic Fin d toolbar (Ctrl+F) or the Full Reader Search window (Shift+Ctrl+F) . Use the Find toolbar to find word s or phrases within one specific document. Use the Full Reader Sear ch window to sear ...

  • Cisco Systems CISCO881SECK9 - page 7

    CHAPTER 1-1 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 1 Product Overview This chapter provides an overview of the featu res available for the Cisco 880 series Integrated Service Router (ISR), and contains the followi ng sections: • General Description , page 1-1 • Cisco 880 Series ISR, page 1-1 • Li ...

  • Cisco Systems CISCO881SECK9 - page 8

    1-2 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 1 Prod uct Overview Cisco 880 Series ISR Ta b l e 1-1 gives the port configuration s of the Cisco 880 series d ata router s. Common Features Cisco 880 series ISRs support the followin g features: • 4-port 10/100 FE LA N Switch, page 1-2 • 802.1 1b/ ...

  • Cisco Systems CISCO881SECK9 - page 9

    1-3 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 1 Product Overview Licensing • Firewall • URL filtering Licensing The Cisco 880 ISR is shipped with li censed software inst alled. Software features may be u pgraded and the software licenses may be managed through Cisco Li censing Manager . See So ...

  • Cisco Systems CISCO881SECK9 - page 10

    1-4 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 1 Prod uct Overview 880 SKUs for next generation Cisco 880 Series ISR platforms • 256 MB Flash • 4-port 10/100 Sw itch • 2-port PoE is a f actory-configurable option • 1 port console/aux • 1 port external USB 2.0 • ADSL2+ Annex B • ISDN b ...

  • Cisco Systems CISCO881SECK9 - page 11

    1-5 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 1 Product Overview Memory • 4-port 10/100 Sw itch • 2-port PoE is a f actory-configurable option • 10/100 FE W AN • 3G modem with Dual SIMM card slots • 1 port console/aux • 1 port external USB 2.0 • Real-time clock • Embedded WLAN ante ...

  • Cisco Systems CISCO881SECK9 - page 12

    1-6 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 1 Prod uct Overview LED Overview LED Overview All LEDs are visible on the front of the chassis (bezel side). No LEDs are mounted on the I/O side. T able 1-3 LED Definition Summary by Interface LED Color Description Indication PWR Ok Green Power On OK, ...

  • Cisco Systems CISCO881SECK9 - page 13

    1-7 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 1 Product Overview LED Overview W irele ss/LAN Green 2.4 GHz Radio Off= Radio is down (no SSID configured ) Steady on= Radio is up, SSID configured, beaco ns being send, client is associated, no data traffic being sent/received Slow blink= Radio is up ...

  • Cisco Systems CISCO881SECK9 - page 14

    1-8 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 1 Prod uct Overview Power Supply Power Supply External 12V Power Supply Adapter The following power supplies ar e used accross Next generation Cisco 880 ISR platfor ms depending on SKU: • New grounded 12 V 30 W external desktop adapter for all 86x an ...

  • Cisco Systems CISCO881SECK9 - page 15

    1-9 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 1 Product Overview Images supported – advsecurity_npe Feature licenses: – ios-ips-ipdate Minimum software version needed to support AP802 Ta b l e 1-4 Software version needed for AP802 Software Mini mum version Router IOS 15.1(4) M AP IOS (Autonomo ...

  • Cisco Systems CISCO881SECK9 - page 16

    1-10 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 1 Prod uct Overview Images supp orted ...

  • Cisco Systems CISCO881SECK9 - page 17

    CHAPTER 2-1 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 2 Wireless Device Overview W ireless devices (commonly configured as access points ) provide a secure, affordable, and easy-to-use wireless LAN solution that combi nes mobility and flex ibil ity with t he enterprise-class features required by networkin ...

  • Cisco Systems CISCO881SECK9 - page 18

    2-2 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 2 Wireless Devi ce Overview Management Options Management Options The wireless device runs its own version of Cisco IO S software that is separat e from the Cisco IOS software operating on the router . Y ou can configure and mo nitor the access point w ...

  • Cisco Systems CISCO881SECK9 - page 19

    2-3 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapte r 2 Wir eless De vice Ov erview Network Configuration Examples Network Configuration Examples Setup the access poin t role in any of these co mm on wireless network co nfigurations. The access p oint default conf igura tion is as a roo t uni t conn ec t ...

  • Cisco Systems CISCO881SECK9 - page 20

    2-4 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 2 Wireless Devi ce Overview Network Configuration Examples Central Unit in an All-Wireless Network In an all-wireless network, an access point acts as a stand-alone root unit. The access point is not attached to a wired LAN; it functions as a hub linki ...

  • Cisco Systems CISCO881SECK9 - page 21

    CHAPTER 3-1 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 3 Basic Router Configuration This chapter provi des procedures for configuring th e basic parameters of your Cisco router , including global parameter settings, rou ting protocols, interf aces, and command-line access. It also describes the default con ...

  • Cisco Systems CISCO881SECK9 - page 22

    3-2 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Interfac e Ports Interface Ports Ta b l e 3-1 lists the interfaces that are s upported for each router and th ei r associated port labels o n the equipment. Default Configuration When you first boot up your Cisco ro uter , ...

  • Cisco Systems CISCO881SECK9 - page 23

    3-3 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Default Configuration no aaa new-model ! ! ! ! no ip routing no ip cef ! ! ! ! ! multilink bundle-name authe ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0 ! interface FastEthernet1 shutdown ! interface ...

  • Cisco Systems CISCO881SECK9 - page 24

    3-4 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Information Needed for Configuration line con 0 no modem enable line aux 0 line vty 0 4 password cisco login transport input telnet ssh ! scheduler max-task-time 5000 ! webvpn cef end Router# Information Needed for Configur ...

  • Cisco Systems CISCO881SECK9 - page 25

    3-5 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring Comm and-Line Access • If you plan to connect over an ADSL or G .SHDSL line: – Order the appropriate l ine from your public telephon e service provider . For ADSL lines—Ensure that the ADSL signaling type ...

  • Cisco Systems CISCO881SECK9 - page 26

    3-6 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring Command-Line Access Example The following config uration shows the command-line access commands. Y ou do not need t o input the commands marked “defau lt.” These commands ap pear autom atically in t he confi ...

  • Cisco Systems CISCO881SECK9 - page 27

    3-7 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring Global Parameters Configuring Global Parameters T o configure selected global parameters for your router , perform these steps: SUMMAR Y STEPS 1. configure terminal 2. hostname name 3. enable secret passwor d 4 ...

  • Cisco Systems CISCO881SECK9 - page 28

    3-8 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring WAN Interfaces Configuring a Fast Ethernet WAN Interface T o configure the Fast Ethernet interface on a Cisco 86 1 or 881 ISR, perform these steps, beginning in global co nfiguratio n mode: SUMMAR Y STEPS 1. int ...

  • Cisco Systems CISCO881SECK9 - page 29

    3-9 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring WAN Interfaces 4. shutdown 5. no shutdown 6. exit DET AILED STEPS Configuring ADSL or VDSL on Cisc o Multi Mode 886VA and 887VA ISRs The Cisco customer premise equipment (CPE) 886V A and 887V A integrated servi ...

  • Cisco Systems CISCO881SECK9 - page 30

    3-10 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring WAN Interfaces The following examples assum e th e DS LAM is config ured in either ADSL2+ mode or VDSL2, and the CPE is configured in auto mode. Figure 3-1 shows an A TM W AN or Ethernet W AN network topograph ...

  • Cisco Systems CISCO881SECK9 - page 31

    3-11 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring WAN Interfaces • V erifying CPE to Peer Connection for ADSL Configuring ADSL Auto Mode Perform these steps to configu re the DSL controller to auto mode, star ting in gl obal configuratio n mode. Note Config ...

  • Cisco Systems CISCO881SECK9 - page 32

    3-12 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring WAN Interfaces Configuring the ATM CPE SIDE Perform the following steps to configure t he A TM CPE side, starting in global configuration mode. SUMMAR Y STEPS 1. interface type number 2. no shutdown 3. interfac ...

  • Cisco Systems CISCO881SECK9 - page 33

    3-13 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring WAN Interfaces ADSL Configuration Example The following example shows a t ypical ADSL2+ config uration set to auto mo de. Outputs in bold are critical. Router# show running Building configuration... Current co ...

  • Cisco Systems CISCO881SECK9 - page 34

    3-14 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring WAN Interfaces license boot module c880-data level adviperservices ! ! vtp domain cisco vtp mode transparet ! ! controller VDSL 0 ! vlan 2-4 ! ! ! ! ! interface Ethernet 0 no ip address shutdown no fair-queue ! ...

  • Cisco Systems CISCO881SECK9 - page 35

    3-15 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring WAN Interfaces login transport input all ! exception data-corruption buffer truncate end Verifying ADSL Configuration V erify that the configuration is set properly by using the show controller vdsl 0 command ...

  • Cisco Systems CISCO881SECK9 - page 36

    3-16 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring the Fast Ethernet LAN Interfaces Firmware Source Filename (version) -------- ------ ------------------ VDSL embedded VDSL_LINUX_DEV_01212008 (1) Modem FW Version: 100426_1053-4.02L.03.A2pv6C030f.d22j Modem PHY ...

  • Cisco Systems CISCO881SECK9 - page 37

    3-17 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring a Loopback Interface Configuring a Loopback Interface The loopback interface acts as a placeholder for th e static IP address and provides default routing inform ation. T o configure a loopback interface perfo ...

  • Cisco Systems CISCO881SECK9 - page 38

    3-18 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring Static Routes Verifying Configuration T o verify that you have properly con figured the loopback interface, enter the show inte rface loopback command. Y ou should see verification output similar to the fo llow ...

  • Cisco Systems CISCO881SECK9 - page 39

    3-19 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring Static Routes DET AILED STEPS Example In the following con figuration examp le, the static ro ute sends out all IP packet s with a destination IP address of 192.168.1.0 and a sub net mask of 255.25 5.255.0 on ...

  • Cisco Systems CISCO881SECK9 - page 40

    3-20 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring Dynamic Routes Configuring Dynamic Routes In dynamic routing, the netw ork protocol adjust s the path automatically , based on network traf fic or topology . Changes in dynamic routes are shared with other ro u ...

  • Cisco Systems CISCO881SECK9 - page 41

    3-21 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring Dynamic Routes Example The following config uration example show s RIP version 2 enabled in IP network 10.0.0.0 an d 192.168.1.0. T o see this configuration, use the show running-config co mmand from privilege ...

  • Cisco Systems CISCO881SECK9 - page 42

    3-22 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring Dynamic Routes Configuring Enhanced Interior Gateway Routing Protocol T o configure Enhanced Interior Gateway Routing Protocol (E IGRP) perform these steps, beginning in global co nfiguratio n mode SUMMAR Y STE ...

  • Cisco Systems CISCO881SECK9 - page 43

    3-23 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 3 Basic Router Conf iguration Configuring Dynamic Routes i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gatewa ...

  • Cisco Systems CISCO881SECK9 - page 44

    3-24 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 3 Basic Router Configuration Configuring Dynamic Routes ...

  • Cisco Systems CISCO881SECK9 - page 45

    CHAPTER 4-1 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 4 Basic Wireless Device Configuration This chapter de scribes how to configure t he autono mous wire less devi ce on the foll owing Integrated Services Router (ISR) • Cisco 880 Series Note T o upgrade the auto nomous software to Cisco Unified sof twa ...

  • Cisco Systems CISCO881SECK9 - page 46

    4-2 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Starting a Wireless Configuration Session Starting a Wireless Configuration Session Note Befor e you configure the wireless settings in the rout er’ s setup, you must follow thes e steps to open a session between ...

  • Cisco Systems CISCO881SECK9 - page 47

    4-3 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Starting a Wireless Con figuration Session Tip If you want to create a Cisco IOS software alias for the conso le to session i nto the wire less device , enter the alias exec dot1 1radio service-module wl an-ap 0 se ...

  • Cisco Systems CISCO881SECK9 - page 48

    4-4 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring Wireless Settings Configuring Wireless Settings Note If you are configuri ng the wireless device for the fir st time, you must start a configurat ion session between the access point and the router befo ...

  • Cisco Systems CISCO881SECK9 - page 49

    4-5 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring Wireless Settings Cisco IOS Command Line Interface T o configure the Autonomous wireless device, use the Cisco IOS CLI too l and perform these tasks: • Configuring the Radi o, page 4-5 • Configuring ...

  • Cisco Systems CISCO881SECK9 - page 50

    4-6 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring Wireless Settings For details about settin g up the wireless device in this ro le, see Using the Access Point as a Local Authenticat or at: http://www .cisco.com/en/US/docs/rout ers/access/wi rel ess/so ...

  • Cisco Systems CISCO881SECK9 - page 51

    4-7 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring Wireless Settings Read W ithout VLANs, encryption settings (WEP and ciphers) apply to an interface, such as the 2.4-GHz radio, and you canno t use more than one encryption setting on an interface. For e ...

  • Cisco Systems CISCO881SECK9 - page 52

    4-8 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring Wireless Settings Configuring Wireless Quality of Service Configuring qual ity of service (Qo S) can provide prefer ential treatment to certain traf fic at the expense of other traffic. W ithou t QoS, t ...

  • Cisco Systems CISCO881SECK9 - page 53

    4-9 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Configuring the Access Point in Hot Standby Mode Configuring the Access Point in Hot Standby Mode In hot standby mode, an access point i s designated as a backup for another access poi nt. The standby access point ...

  • Cisco Systems CISCO881SECK9 - page 54

    4-10 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Upgrading to Cisco Unified Software Secure an IP Address on the Access Point Secure an IP address on the acce ss point so it that can communicat e with the WLC and download the Unified image upon boot up. The ho s ...

  • Cisco Systems CISCO881SECK9 - page 55

    4-11 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Upgrading to Cisco Un ified Softw are Note If the service-module w lan-a p 0 bootimage uni fied command does not work successfully , check whether the software license is still eligible. T o identify the access po ...

  • Cisco Systems CISCO881SECK9 - page 56

    4-12 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Related Documentation Recovering Software on the Access Point T o recover the image on the access point, use the service-module wlan-ap0 re se t bootloader command in global configuration mo de. This command retur ...

  • Cisco Systems CISCO881SECK9 - page 57

    4-13 Cisco 880 Series Integrated S ervices Router Software Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Related Docume nta tion Hot Stan dby Access Points This documen t describes h ow to config ure your wire less device a s a hot standby unit. http://www .cisco.com/en/US/docs/rout ers/access/wireless/software/guide ...

  • Cisco Systems CISCO881SECK9 - page 58

    4-14 Cisco 880 Series Integrated Services Router Softwar e Configuration Guide OL-22206-01 Chapter 4 Basic Wireless Device Configuration Related Documentation L W APP W ireless LAN Access Points http://www .cisco.com/en/US/prod/collater al/wireless/ps56 78/ps6306/prod_ white_paper0900aecd 802c18ee_ps6366_Produ cts_White_Pap er .html Cisco IOS Comma ...

Produzent Cisco Systems Kategorie Router

Dokumente, die wir vom Produzenten des Geräts Cisco Systems CISCO881SECK9 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Cisco Systems
- Bedienungsanleitungen CISCO881SECK9
- Produktkarten Cisco Systems
- Informationsbroschüren
- oder Energieetiketten Cisco Systems CISCO881SECK9
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Cisco Systems CISCO881SECK9.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Cisco Systems CISCO881SECK9, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Cisco Systems CISCO881SECK9. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Cisco Systems CISCO881SECK9 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Cisco Systems CISCO881SECK9, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Cisco Systems CISCO881SECK9 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Cisco Systems CISCO881SECK9 verständlich ist.

Eine gänzliche Bedienungsanleitung von Cisco Systems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Cisco Systems CISCO881SECK9 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Cisco Systems CISCO881SECK9 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Cisco Systems CISCO881SECK9, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Cisco Systems CISCO881SECK9 - die uns die ersten Schritte während der Nutzung von Cisco Systems CISCO881SECK9 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Cisco Systems CISCO881SECK9 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Cisco Systems CISCO881SECK9 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Cisco Systems CISCO881SECK9?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Cisco Systems CISCO881SECK9 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Cisco Systems CISCO881SECK9 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)