-
Memorex MSP-PH2400 - page 1
2.4GHz CORDLESS TELEPHONE MODEL: MSP-PH2400 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . OPERA TING INSTRUCTIONS ® ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ） 12/16/01, 12:28 PM 1 ...
-
Memorex MSP-PH2400 - page 2
CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOL T AGE: Uninsulated Dangerous V oltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure. ...
-
Memorex MSP-PH2400 - page 3
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) 5. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury and serious damage to the product. 6. Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the product and ...
-
Memorex MSP-PH2400 - page 4
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) SA VE THESE INSTRUCTIONS BA TTER Y PRECAUTIONS T o reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the battery pack type provided with the unit. 2. Do not dispose of the battery in a fire, the cell may explode. Check with local codes for possible special disposa ...
-
Memorex MSP-PH2400 - page 5
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0). T o be cert ...
-
Memorex MSP-PH2400 - page 6
CONTENTS 5 Important Safety Precautions .......1 Contents..........................................5 Location of Controls .....................6 Installation Instructions.................7 Installation of the Rechargeable Battery .............................................8 Charging the Rechargeable Battery..8 Set-Up Instructions ................ ...
-
Memorex MSP-PH2400 - page 7
LOCA TION OF CONTROLS 6 HANDSET HANDSET: 1. Display 2. T ALK Button 3. OPTION/SCAN Button 4. Down Button/V olume Down 5. Key Buttons (0-9,*,#) 6. MENU/MUTE Button 7. MEMO/SA VE Button 8. MSG/NEW CALL Indicator 9. Up Button/V olume Up 10. CALL Button 1 1. Headset Jack (Side of Unit) 12. DEL/RE-P A (Delete/Redial/ Pause) Button 13. EDIT/FLASH Button ...
-
Memorex MSP-PH2400 - page 8
INST ALLA TION INSTRUCTIONS 7 1. Carefully unpack and remove your unit from the box. 2. Make sure all the items have been included: Base Unit AC Adapter Handset Unit T elephone Cord Rechargeable Ni-Cd Battery Pack Belt Clip 3. Make sure the Rechargeable Battery is installed or install the Rechargeable Battery as described on the next page. PLEASE R ...
-
Memorex MSP-PH2400 - page 9
Remove the battery cover located on the rear of the handset by sliding it downward. If replacing an old battery pack, unplug the battery connector and remove it from the battery compartment. Plug the new battery into the rechargeable battery plug and insert the rechargeable battery into the battery compartment. Put the battery cover back on by slid ...
-
Memorex MSP-PH2400 - page 10
9 SET -UP INSTRUCTIONS SETTING THE RINGER This will enable you to turn the ringer On or Of f. 3 1 2 4 5 While in the Standby mode, press a nd hold t he MENU/MUTE button. Press the Key button 1 , or the Up/Down buttons to select the Ringer setting. Press the EDIT/FLASH button . Press the Up/Down buttons to turn this option On or Off. Press the MEMO/ ...
-
Memorex MSP-PH2400 - page 11
10 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE LANGUAGE Set the language (ENGLISH, SP ANISH, FRENCH) as follows: 3 1 2 4 5 While in the Standby mode, press a nd hold t he MENU/MUTE button. Press the Key button 2 , or the Up/Down buttons to select the Language setting. Press the EDIT/FLASH button . Press the Up/Down buttons to select the desired la ...
-
Memorex MSP-PH2400 - page 12
11 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE FIRST RING MODE Y ou can set to turn Off the first ring of the telephone until the caller ID informa- tion has been displayed. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 3 , or the Up/Down buttons to select the First Ring mode setting. Press the EDIT ...
-
Memorex MSP-PH2400 - page 13
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE TIME It is necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller ID, the time and date are automatically set when the first call is received. If the time is not automatically set, follow the steps be ...
-
Memorex MSP-PH2400 - page 14
13 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE AREA CODE Set the phone to your local area code as described below. If you live in a town with more than one area code, do not enter an area code for this option. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 5 , or the Up/Down buttons to select the Are ...
-
Memorex MSP-PH2400 - page 15
14 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE LCD CONTRAST There are three contrast levels for this telephone. Set the level as follows: 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 6 , or the Up/Down buttons to select the LCD Contrast setting. Press the EDIT/FLASH button . Press the Up/Down butto ...
-
Memorex MSP-PH2400 - page 16
15 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PBX NUMBER This telephone enables you to preset the PBX number (such as 8 or 9), while you are using a switchboard system. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 7 , or the Up/Down buttons to select the PBX Number setting. Press the EDIT/FLASH bu ...
-
Memorex MSP-PH2400 - page 17
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PBX MODE This telephone enables you to turn the PBX system On or Off, depending on the telephone system being used. 16 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 8 , or the Up/Down buttons to select the PBX Mode setting. Press the EDIT/FLASH button . Pr ...
-
Memorex MSP-PH2400 - page 18
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE P AUSE TIME This telephone enables you to adjust the pause time when placing a call using a switchboard system or dialing long distance calls . 17 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 9 , or the Up/Down buttons to select the Pause T ime setting. P ...
-
Memorex MSP-PH2400 - page 19
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE MSG (MESSAGE) W AITING This will enable to you to turn off the Message W aiting Indicator . 18 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 0 , or the Up/Down buttons to select the MSG W aiting setting. Press the EDIT/FLASH button . Press the MEMO/SA VE b ...
-
Memorex MSP-PH2400 - page 20
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE AUT O ANSWER MODE This will enable you to turn the auto answer On or Off. In On mode, the telephone will automatically answer an incoming call when the handset is lifted from the base . 19 Press the MENU/MUTE button to exit the program mode. 5 3 4 Press the MEMO/SA VE button when done; a confirmation ton ...
-
Memorex MSP-PH2400 - page 21
20 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PRIV A TE RING MODE Y ou can set to turn On or Off the ring for all calls with blocked Caller ID. 3 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Down button twice , or the Up/Down buttons to select the Private Ring mode setting. Press the EDIT/FLASH button . Press th ...
-
Memorex MSP-PH2400 - page 22
21 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE UNA V AILABLE RING MODE Y ou can set to turn On or Off the ring for all calls with unavailble Caller ID information. 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Down button once , or the Up/Down buttons to select the Unavailable Ring mode setting. Press the EDIT/FLA ...
-
Memorex MSP-PH2400 - page 23
22 BASIC OPERA TION PLACING A CALL 1 2 After the battery has been fully charged, press the T ALK button and listen for a dial tone; the IN USE indicator on the base will light and “T ALK” as well as the timer will appear on the display. Press the Key buttons (0-9) to dial the phone number you wish to call. The display will show the amount of ti ...
-
Memorex MSP-PH2400 - page 24
BASIC OPERA TION (CONTINUED) 23 RECEIVING A CALL The last 40 incoming calls are saved in the Caller ID log. Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name of the caller, number, time and date of the call. T o answer the call if the handset is out of the base, press th ...
-
Memorex MSP-PH2400 - page 25
BASIC OPERA TION (CONTINUED) 24 1 2 T o end a call, simply return the handset to the base, or press the T ALK button on the handset; the IN USE indicator will turn off on the base and “RING: ON” will appear in the display. This telephone allows you to select a channel from the 40 frequencies available to transmit signals from the base unit to t ...
-
Memorex MSP-PH2400 - page 26
25 BASIC OPERA TION (CONTINUED) OUT OF RANGE W ARNING The handset and base communicate up to a maximum range. The distance can be affected by the weather , power lines or other cordless telephones. If you move the handset too far away from the base unit, the handset will beep and the display will show, "OUT RANGE". In this case, move clos ...
-
Memorex MSP-PH2400 - page 27
BASIC OPERA TION (CONTINUED) 26 1 Press the P AGE button on the base to locate the handset when not in use; the handset will beep for 20 seconds. Press again to end the paging feature. Press the T ALK button on the handset to end paging. 1 Press the EDIT/FLASH button to momentarily hang up. This is useful for custom calling features, such as Call W ...
-
Memorex MSP-PH2400 - page 28
27 BASIC OPERA TION (CONTINUED) 1 If you are in a Pulse dialing area you may still take advantage of touch-tone services after dialing to respond to touch-tone prompts. T o do this, press the * / button to temporarily change the dialing mode from Pulse to T one after dialing in the Pulse mode.This will enable Pulse users to access touch- tone servi ...
-
Memorex MSP-PH2400 - page 29
28 DELETING ONE NAME/NUMBER FROM THE CALLER ID LOG BASIC OPERA TION (CONTINUED) 1 2 Scroll through the calls to select a number to delete by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call. Press the DEL/RE-P A button . The dis- play will show “ERASE ITEM?”. P ...
-
Memorex MSP-PH2400 - page 30
29 BASIC OPERA TION (CONTINUED) 1 2 Scroll through the calls to select a number to dial by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call. Press the OPTION button repeatedly until the desired prefixes appear. If a 1 in the area code is necessary to dial, then pre ...
-
Memorex MSP-PH2400 - page 31
30 BASIC OPERA TION (CONTINUED) ADDING A DIRECTOR Y ENTR Y The directory can store up to 20 name/telephone numbers. 1 2 Scroll through the calls to select a number by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call. Press the MEMO/SA VE button. 3 1 2 4 Press the M ...
-
Memorex MSP-PH2400 - page 32
31 BASIC OPERA TION (CONTINUED) ENTERING A NAME USING THE KEY BUTTONS When entering names into the directory, you must use the Key buttons (0-9,*,#). T o use the buttons to add names, perform the following steps: 1 2 Follow steps one and two on the previous page to program the telephone number. See the chart below and using the Key buttons (0-9,*,# ...
-
Memorex MSP-PH2400 - page 33
32 BASIC OPERA TION (CONTINUED) DIALING A NUMBER FROM THE DIRECT OR Y T o select and dial a number from the directory , follow the steps below: 1 2 Press the MEMO/SA VE button. Press the Up or Down button to locate the number you would like to call, then press the T ALK button . ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩ? ...
-
Memorex MSP-PH2400 - page 34
33 PREFERRED CALLS (VIP) Y ou can assign a VIP , which will generate a special second ring. BASIC OPERA TION (CONTINUED) 1 2 Press the MEMO/SA VE button , followed by the Up or Down button to find the desired name/number. Press the MENU/MUTE button ; the display will show the VIP indicator. Press the MEMO/SA VE button to save the VIP call. BASIC OP ...
-
Memorex MSP-PH2400 - page 35
BASIC OPERA TION (CONTINUED) EDITING A DIRECT OR Y ENTR Y T o select and edit a name/number from the directory , follow the steps below: 1 2 Press the MEMO/SA VE button , fol- lowed by the Up or Down button to find the desired name/number. Press the EDIT/FLASH button to edit the name. 3 4 Press the # button to move the cursor to the right or the * ...
-
Memorex MSP-PH2400 - page 36
BASIC OPERA TION (CONTINUED) DELETING ONE NAME/NUMBER FROM THE DIRECT OR Y T o delete a name/number from the directory , follow the steps below: 1 2 While in the Standby mode, press the MEMO/SA VE button , followed by the Up or Down button to find the desired name/number. Press the DEL/RE-P A button . The dis- play will show “ERASE ITEM?”. Pres ...
-
Memorex MSP-PH2400 - page 37
TROUBLESHOOTING GUIDE SOLUTION Make sure the telephone line cord is connected properly to the modular wall jack. Make sure the battery pack is properly connected inside the handset. The handset may need recharging, recharge handset. Make sure the charging contacts on both the base and handset are in contact during charging. The charging contacts ma ...
-
Memorex MSP-PH2400 - page 38
CARE AND MAINTENANCE 1. Clean your phone with a damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. 3. Keep your unit away from heating appliances. 4. Every few months, or when charging becomes abnormal, clean the contacts of the handset and the base ...
-
Memorex MSP-PH2400 - page 39
NOTE: 38 ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ） 12/16/01, 12:30 PM 39 ...
-
Memorex MSP-PH2400 - page 40
39 Memcorp, Inc. Weston, FL Printed in China Visit our website at www .memcorpinc.com 09172C-1 ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ） 12/16/01, 12:30 PM 40 ...
Haben Sie eine Frage bezüglich Memorex MSP-PH2400?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Memorex MSP-PH2400 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Memorex MSP-PH2400 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.