Deutsch dropdown-ico

Bedienungsanleitung ATEN Technology CS-228

41 Seiten 0.41 mb
Download

Zur Seite of 41

Summary
  • ATEN Technology CS-228 - page 1

    2 Console / 8 Port KVM Switch CS-228 User Manual www.aten.com ...

  • ATEN Technology CS-228 - page 2

    CS-228 User Manual ii FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which cas e the user may be required to tak e adequate measures. This equipment has been test ed and found to comply with the limit s for a Class A digital device, pursuant to Part 15 of the FCC Rules. These l ...

  • ATEN Technology CS-228 - page 3

    CS-228 User Manual iii User Information Online Registration Be sure to register your product at our online support center:  International – http :/ /supp ort.aten.com  North America – http ://www .aten-usa.com/product_registration T elephone Suppo rt  International – 886-2-869 2-6959  North America – 1- 8 88-999-A TEN User Notic ...

  • ATEN Technology CS-228 - page 4

    CS-228 User Manual iv Package Content s The basic CS-228 package consists of:  1 CS-228 KVM Switch with Stacking Pads  1 Power Adapter  1 Rack Mount Kit  1 User Manual* Check to make sure that all the comp onents are present and that nothing got damaged in shipping . If you encounter a problem, contact your dealer. Read this manual tho ...

  • ATEN Technology CS-228 - page 5

    CS-228 User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • ATEN Technology CS-228 - page 6

    CS-228 User Manual vi 4. OSD Operation OSD Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OSD Main Menu Headings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Port Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ...

  • ATEN Technology CS-228 - page 7

    CS-228 User Manual vii About this Manual This User Manual is provided to help you get the most from your c/c system. It covers all aspects of installation, configurati on and op erati on. An overview of the information fou nd in th e manual is provided below. Chapter 1, Introductio n, introduces you to the CS-22 8 system. Its purpose, features and ...

  • ATEN Technology CS-228 - page 8

    CS-228 User Manual viii Conventions This manual uses the following conven tio ns: Product Information For information abo ut all ATEN produ cts and how they can help you connect without limits, vi si t ATEN on the Web or co ntact an ATEN Authorized Reseller.Vis it ATEN on th e Web for a li st of locations and telephone numbers  International – ...

  • ATEN Technology CS-228 - page 9

    1 Chapter 1 Introduction Overview The CS-228 KVM Switch is a control unit that allows two indepen dent keyboard, mouse, and moni tor Consoles to access eight computers, either independently or on a multiuser shared ba sis, in a convenient, cost effective manner. A Master View CS-228 unit can c ontrol up to 8 PCs. Sin ce it can be cascaded one level ...

  • ATEN Technology CS-228 - page 10

    CS-228 User Manual 2 Features  2 Consoles Control 8 Computers  One or T wo Users Can Operate Up T o 64 Computers (via cascade to CS-138A, CS-9138, CS-128A, or CS-1 24A) At The Same Time  Each Console Has It s Own Access Control  Port Selection via OSD (On Screen Display)  Auto Expansion of The OSD Port List For Cascaded Installations ...

  • ATEN Technology CS-228 - page 11

    1. Introduction 3 Requirement s Console  A VGA, SVGA, or multisync monitor capable of the highest resolution that you will be using on any com puter in the in stallation. If a monitor switches to a computer us ing a resolution that is hig her th an the resolution that the monito r can support, serious damage to the mo nitor may result.  A PS/ ...

  • ATEN Technology CS-228 - page 12

    CS-228 User Manual 4 Cables Use of substandard cables may damage the connected devices or degrade overall performance. For optim um sign al integrity and to simplify the layou t, we strongly recom mend that you use the follo wing high quality Custom Cable sets: Note: 1. If your computer uses a stan dard AT style keyboard socket you will need to pur ...

  • ATEN Technology CS-228 - page 13

    1. Introduction 5 Component s Front Panel No. Component Description 1 Port LEDs  An On Line LED lights ORANGE to indicate that the computer attached to its corresponding port is up and running. If the LED is flashing, it indicates that the Port is being used for Cascading to another switch.  A Selected LED lights GREEN to indicate that the co ...

  • ATEN Technology CS-228 - page 14

    CS-228 User Manual 6 Rear Panel No. Component Description 1 Power Switch This is a st andard rocker switch that powers the un it On and Off. 2 Power Jack The power adapater cable plugs in here. 3 Console 2 KVM Section The microphone, speakers, monitor , keyboard and mouse that belong to Console 2 plug in here. 4 Console 1 KVM Section The microphone ...

  • ATEN Technology CS-228 - page 15

    7 Chapter 2 Hardware Setup S t acking and Mounting The CS-228 can be placed on the desktop or it can be rack mounted, as described in the sections that fo llo w. St acking The unit comes with the stacking brackets already attached. No te that there is a top and bottom half to each bracket. Th e top half has a convex surface; the bottom half has a c ...

  • ATEN Technology CS-228 - page 16

    CS-228 User Manual 8 Rack Mounting The CS-228 can be mounted in a 1U syst em rack. To rack mount the unit, do the following: 1. Remove the stacking brackets by unsc rewing them from the unit, as shown in the diagram below: 2. Use the s crews that came with the rack mount kit to screw the moun ting brackets into the sides of the unit, as shown in th ...

  • ATEN Technology CS-228 - page 17

    2. Hardware Setup 9 Single St ation Installation The most basic installation is a Single Stage installati on, in which no additional Master Views are cascaded down from the first unit. To set up a single stage installation, refer to the installation diagram on the fo llo wing page as you perform these steps: 1. Plug the monitor , keybo ard, and mou ...

  • ATEN Technology CS-228 - page 18

    CS-228 User Manual 10 (Continued from previous page.) 6. Plug in the power cords and power On all the computers. Note: Y ou must turn on the power to the CS-228 before turning on the power to the comp uters. Single Stage Inst allation Di agram ...

  • ATEN Technology CS-228 - page 19

    2. Hardware Setup 11 T wo St age Installation To control even more computers, up to eight additional switches can be cascaded from the KVM ports of the CS-228. The cascaded switches that connect back to the First Stage unit (the CS-228 ), are considered Second Stage units. As many as 64 computers can be controlled in a complete two stage installati ...

  • ATEN Technology CS-228 - page 20

    CS-228 User Manual 12 T wo St age Installation Diagram 1 2 3 4 5 6 7 8 ...

  • ATEN Technology CS-228 - page 21

    13 Chapter 3 Basic Operation Hot Plugging The CS-228 supports hot plugging – co mponen ts can be removed and added back into the installation by unpluggi ng their cables from the KVM ports without the need to shut the unit down. In order for hot pluggi ng to wo rk properly, however, these pro cedures must be followed: 1. When hot plugging cables ...

  • ATEN Technology CS-228 - page 22

    CS-228 User Manual 14 Port Selection Instant access to any computer on the in stallation is provided by the m enu driven On Screen Display (OSD) function. OSD operation is discussed in the next chapter. ...

  • ATEN Technology CS-228 - page 23

    15 Chapter 4 OSD Operation OSD Overview The On Screen Display (OSD), provides a menu driven interface to handle the computer switching procedur e. All operations start from the OSD Main Menu. To activate the Main Menu, tap either [Ctrl] key twice. Note: 1. You must tap the same key twice (both left, or both right). 2. If u sing the [Ctrl] key co nf ...

  • ATEN Technology CS-228 - page 24

    CS-228 User Manual 16 OSD Main Menu Headings Port Numbering Each computer on the installation is assigned a unique Port Number (PN). The PN is a one or two segment number that is determined by the Stage Level and KVM port of the KVM switch that the co mputer is connected to. The first segment represents the KVM Port number of the First Stage unit ( ...

  • ATEN Technology CS-228 - page 25

    4. OSD Operation 17 OSD Navigation  T o dismiss the menu, and d eactivate the OSD, Click the X at the upper right corner of the OSD W indow; or press [Esc] .  T o move up or down through the list one line at a time, Click the Up and Down T riangle symbols ( ST ) or use the Up and Down Arrow Keys. If there are more list entries than there is r ...

  • ATEN Technology CS-228 - page 26

    CS-228 User Manual 18 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port for Quick View scanning; create or edit a port name; or make OSD setting adjustments. To access an OSD function: 1. Either Click a ...

  • ATEN Technology CS-228 - page 27

    4. OSD Operation 19 F3: LIST This function le ts you broaden or narr ow the scope of which ports th e OSD lists. This will be different for each Console, depending on the choices made for that Console. The choices and their meanings are given in the table, below: Double-click the choice you want, or move the Highlight Bar to it then press [Enter] . ...

  • ATEN Technology CS-228 - page 28

    CS-228 User Manual 20 F4: SCAN Clicking the F4 field, or pressing [F4] ini tiates Scan Mode , in which the OSD cycles through all the ports that have been selected for scanning with the Scan Mode setting (see SCAN MODE , page 23). Wh en you want to stop at a particular location, press the [Spacebar] to stop scanning.  If the scanning stops on an ...

  • ATEN Technology CS-228 - page 29

    4. OSD Operation 21 F5: ADM F5 allows an Admini strator to configure th e OSD operation of the C onsole. To change a setting double-click it; or use the up and down arrow keys to move the highlight bar to it then press [Enter] . After you select an item, a submenu with further choices for you to select from appears. Double-click the choice you want ...

  • ATEN Technology CS-228 - page 30

    CS-228 User Manual 22 F6: Set [F6] allows you to configure the OSD settings for the Console you are working at. To change a setting: 1. Double-click it; or move the highlight bar to it , then press [Enter] 2. P ress [Esc] to activate it. After you select an item, a submenu with further choices appears. To make a selection, either double-click it; o ...

  • ATEN Technology CS-228 - page 31

    4. OSD Operation 23 (Continued from previous page.) Setting Function SCAN MODE Selects which Ports are av ailable for scanning. There are six choices:  ALL - All the Ports which have been set Accessible (F5)  QVIEW - Only those Ports which have been set Accessible (F5) and have been selected for Quick View Scanning (F7)  POWERED ON - Only ...

  • ATEN Technology CS-228 - page 32

    CS-228 User Manual 24 F7: QV You can broaden or narrow the number of ports that get automati cally scanned by selecting only the ones you want wi th the QV (Quick View Scan) function. [F7] is a toggle that selects or deselects the currently highligh ted port for the Quick View Scan ning function (see F4, above). To select/deselect a port for Quick ...

  • ATEN Technology CS-228 - page 33

    25 Appendix Safety Instructions General  Read all of these instructions. Save them for future reference.  Follow all warnings and instructions marked on the dev ice.  Do not place the device on any unstable su rf ace (cart, stand, table, etc.). If the device falls, serious damage wi ll resul t.  Do not use the device near water .  Do ...

  • ATEN Technology CS-228 - page 34

    CS-228 User Manual 26  T o help protect y our system from sudden, transient increases and decreases in electrical power , use a su rge suppressor , line conditioner , or un-interruptible power supply (U PS).  Position system cables and power cable s carefully; Be sure that nothing rests on any cables.  When connecting or disconnect ing po ...

  • ATEN Technology CS-228 - page 35

    Appendix 27 Rack Mounting  Before working on the rack, ma ke su re that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.  Always load the r ...

  • ATEN Technology CS-228 - page 36

    CS-228 User Manual 28 T echnical Support International North America When you contact u s, please have the followin g information ready beforehand:  Product model number, serial number , and date of purchase.  Y our computer configuration, incl udin g operating system, revision level, expansion cards, and software.  Any error messages disp ...

  • ATEN Technology CS-228 - page 37

    Appendix 29 Specifications Function S pecification Computer Connections Direct 8 Max 64 (via Cascade) Port Selection OSD (On Screen Display) Connectors External Console Ports Keyboard 2 x 6-pin Mini DIN Female (Purple) Video 2 x HDB-15 Female Mouse 2 x 6-pin Mini DIN Female (Green) S peaker 2 x Mini S tereo Jack Female (Green) Microphone 2 x Mini S ...

  • ATEN Technology CS-228 - page 38

    CS-228 User Manual 30 Master View - Com puter Connection T ables Switches Ty p e Co mputers 1 CS-228 1 - 8 2 CS-128A / CS-138A / CS-9138 8 - 15 3 CS-128A / CS-138A / CS-9138 15 - 22 4 CS-128A / CS-138A / CS-9138 22 - 29 5 CS-128A / CS-138A / CS-9138 29 - 36 6 CS-128A / CS-138A / CS-9138 36 - 43 7 CS-128A / CS-138A / CS-9138 43 - 50 8 CS-128A / CS-1 ...

  • ATEN Technology CS-228 - page 39

    Appendix 31 OSD Factory Default Settings Setting Default MUL TIUSER MODE Enabled ACCESS TIMEOUT 2 Seconds OSD HOTKEY [Ctrl] [Ctrl] DISPLA Y MODE The Port Number plus the Port Name DISPLA Y DURA TION 3 Seconds SCAN DURA TION 3 Seconds ...

  • ATEN Technology CS-228 - page 40

    CS-228 User Manual 32 T roubleshooting Symptom Possible Cause Action Keyboard and/or Mouse not responding. The connection f rom the selected port to the targ et comput er has been broken, or the compute r is turned OFF . Check the Online LED for the selected port. If it is not lit: 1. Check to see that the computer is powered On. 2. Check the cable ...

  • ATEN Technology CS-228 - page 41

    33 Index C Cables, 4 Components Front Panel, 5 Rear Panel, 6 Connection Tables, 30 F Factory Default Settings, 31 Features, 2 H Hot Plugging, 13 I Installation Cascaded, 11 Single Station, 9 L Limited Warranty, 32 M Mounting, 8 O Online Registration, iii OSD Factory Default Settings, 31 Functions, 18 Main Menu Headings, 16 Navigation, 17 Overview, ...

Produzent ATEN Technology Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts ATEN Technology CS-228 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen ATEN Technology
- Bedienungsanleitungen CS-228
- Produktkarten ATEN Technology
- Informationsbroschüren
- oder Energieetiketten ATEN Technology CS-228
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung ATEN Technology CS-228.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen ATEN Technology CS-228, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen ATEN Technology CS-228. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts ATEN Technology CS-228 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts ATEN Technology CS-228, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von ATEN Technology CS-228 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von ATEN Technology CS-228 verständlich ist.

Eine gänzliche Bedienungsanleitung von ATEN Technology sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von ATEN Technology CS-228 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von ATEN Technology CS-228 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich ATEN Technology CS-228, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts ATEN Technology CS-228 - die uns die ersten Schritte während der Nutzung von ATEN Technology CS-228 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit ATEN Technology CS-228 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von ATEN Technology CS-228 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich ATEN Technology CS-228?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ATEN Technology CS-228 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ATEN Technology CS-228 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)