Bedienungsanleitung Haier WQP4-1A

18 Seiten 1.15 mb
Download

Zur Seite of 18

Summary
  • Haier WQP4-1A - page 1

    DOMESTIC DISHWASHER WQP4-1A Code:012050 GB ...

  • Haier WQP4-1A - page 2

    Flash wash Intelligently programmed with 6 washing programs available for selection, which are rinse, standard wash, intense wash, rinse with drying, standard wash with drying and intense wash with dring. Heated wash Sliding nylon rack Automatic fault alarm Open-door protection Easy operation and convenient use All mentioned above are advan-ced fea ...

  • Haier WQP4-1A - page 3

    Dishwasher This unit is a tableware-cleaning dishwasher. It sprays hot water with detergent on the tableware, then flushes with clean water. Used when opening or closing the door. Be careful not let the door open accidentally. Handle First push, on; Second push, off. PARTS AND FUNCTIONS Foot Washing while Rotating. Door seal Filter Separates water ...

  • Haier WQP4-1A - page 4

    PARTS AND FUNCTIONS Control panel Powered on when pressed down, powered off when released. On/Off switch Drying indicator The lamp twinkles to indicate the ap- pliance is under the drying process. The lamp lights when the drying pro- cess is coming on. The lamp is off when the drying process is not selected. Washing indicater The lamp lights when t ...

  • Haier WQP4-1A - page 5

    special power socket K  K The legend indicates"forced execution" Warning If it treated wrongly, it may lead to death or serous injury. It indicates guessed accident. SAFETY It shows items. The contents are as the follows: Caution If it is treated wrongly, it may leads to injury. It indicates guessed accident. The items which must be ob ...

  • Haier WQP4-1A - page 6

    KRK Do not use the unit outdoors. Forbidden If it is used in wet environment, it may lead to electric leakage or electric shock. Never touch the power plug, electric parts, nor operate the power switch with wet hands. Do not use the unit as flush dishwasher. It is difficult to eliminate heat, it may cause electric shock or wet the around appliance. ...

  • Haier WQP4-1A - page 7

    SAFETY Do not touch detergent with hands when you use it. Avoid it enter your eyes. Warning When abnormal phenomenon appears, turn the power switch to"off", take off the power plug, or cut off the main power supply and get in touch with haier After-sales Service Center at once. Take off the plug Continually operation at abnormal state may ...

  • Haier WQP4-1A - page 8

    Tightly screw the tighting nut on the inlet pipe into the water valve. Water valve Tighting nut BEFORE OPERATION Warning Intallation should be done by experts. If the customer installs it improperly, it may cause water leakage, electric leakage or fire. When connecting it to a lateral type valve Use drinking water.Other water may leads to rust or j ...

  • Haier WQP4-1A - page 9

    Program OPERATION INSTRUCTIONS Program selection 1. There are six types of washing program available for selection, which are normal wash, intense wash, prewash, normal wash with drying, intense wash with drying and prewash with drying. 2. Press the On/Off switch and then indicators for drying and standard wash illuminate. 3.Check the conditions of ...

  • Haier WQP4-1A - page 10

    A.Shelf(The container which dishes are put in is called shelf). Caution Forbidden Do not wash non-heat-resistant tableware: such as lacquer-coated containers,alumi- num or silver food containers.Otherwi-se, they may be deformed, faded or damaged. 1.Open the door and put the shelf in 1) Set the lock on"open"position, draw the handle forwar ...

  • Haier WQP4-1A - page 11

    Select proper program . The program indicator lights in 5 sec- onds and the wash process starts. OPERATION INSTRUCTIONS C.Dish washing 1.Switch on the appliance. Press the On/Off switch and the indicators for drying and stan- dard wash illuminate. 2.Program selection 3.End of wash. 1) When a program with drying process is selected, the program indi ...

  • Haier WQP4-1A - page 12

    MAINTENANCE Daily Maintenance 1. Take out the filter after draining is finished, and the washing box is cooled. 2. Remove residues on the filter. Then, wash and clean it. 3.Mount the filter back after the water on it is dried. Weekly Maintenance Warning Do not flush the dishwasher directly with water. Otherwise, it will cause shot circuit, electric ...

  • Haier WQP4-1A - page 13

    MAINTENANCE 2.Cleaning the door and washing box. 1) Clean them with a piece of wet cloth. Often wash them with special detergent without dishes inside the unit to keep clean. 2) Check the door seal strip for damage. Damaged or cracked seal may lead to water leakage. If it is damaged, please con- tact the local maintenance department or after-sales ...

  • Haier WQP4-1A - page 14

    Disorder Possible causes Trouble The indicators for drying, prewash and normal wash illu- minate and the buzzer buzzes. No water supply * The tap is turned off. * There is no water in the pipe. * The pipe is blocked. * The water pressure is too low. The indicators for drying, nor- mal wash and intensive wash illuminate and the buz-zer buzzes. * Tur ...

  • Haier WQP4-1A - page 15

    1) Shut off the power, make a check and take measures as described in the follows: 2) Make a test run after faults have been eliminated. 3) When the above phenomena appear again, take off the plug and contact one of the maintenance departments. Possible causes Power failure, ice up or water failure Power failure Ice up Water failure * Turn off the ...

  • Haier WQP4-1A - page 16

    When you have any questions or the product has any abnormal phenomena, please contact our mainte- nance department or the nearby after-sales service center for consultation or service. When you ask for service, please give us your name,address, telephone number, name and type of the product. Describe the fault correctly. We will serve you as soon a ...

  • Haier WQP4-1A - page 17

    TECHNICAL SPECIFICATIONS AND PACKING LIST Packing List Technical specifications Power supply 220-240V~ 50Hz Wash pump 50Hz 120W Heater 50Hz 1100W Max. Power consumption 50Hz 1250W 440X515X540mm About 19kg < 16L Power consumption Water consumption Dimensions Weight Drying mode Standard capacity Heated air drying Bowl: 4pcs Spoon Soup bowl:4pcs Fo ...

  • Haier WQP4-1A - page 18

    Quantity of dishes ILLUSTRATION OF DISHES ARRANGEMENT Bowl-------------4pcs Small dish------4pcs Soup bowl-------4pcs Big dish----------4pcs Glass------------4pcs Knife Cup------------4pcsc Fork Please arrange the dishes as illustrsted. Please arrange the dishes as illustrsted. Medium dish----4pcs Spoon-----------4pcs GB KNTK The above pic.is only ...

Produzent Haier Kategorie Dishwasher

Dokumente, die wir vom Produzenten des Geräts Haier WQP4-1A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Haier
- Bedienungsanleitungen WQP4-1A
- Produktkarten Haier
- Informationsbroschüren
- oder Energieetiketten Haier WQP4-1A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Haier WQP4-1A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Haier WQP4-1A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Haier WQP4-1A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Haier WQP4-1A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Haier WQP4-1A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Haier WQP4-1A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Haier WQP4-1A verständlich ist.

Eine gänzliche Bedienungsanleitung von Haier sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Haier WQP4-1A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Haier WQP4-1A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Haier WQP4-1A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Haier WQP4-1A - die uns die ersten Schritte während der Nutzung von Haier WQP4-1A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Haier WQP4-1A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Haier WQP4-1A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Haier WQP4-1A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Haier WQP4-1A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Haier WQP4-1A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)