Deutsch dropdown-ico

Bedienungsanleitung Casio FC200V

149 Seiten 1.87 mb
Download

Zur Seite of 149

Summary
  • Casio FC200V - page 1

    FC-200V FC-100V User's Guide E CASIO Worldwide Education Website http://edu.casio.com CASIO EDUCATIONAL FORUM http://edu.casio.com/forum/ ...

  • Casio FC200V - page 2

    Important! CASIO COMPUTER CO., LTD. makes no guarantees concerning accuracy of the contents of this manual or their suitability for any commercial purpose or other particular purpose, or concerning the accuracy of calculation results (such as financial calculation simulation results) produced by this calculator. • Financial calculation rules and ...

  • Casio FC200V - page 3

    E-1 About this Manual • This User ’s Guide covers use and operation of the CASIO FC-200V and FC-100V . Operations apply to both models, except in cases indicated by the text “FC-200V only”. • Keycap markings indicate what a key inputs or what function it performs. Example: 1 , 2 , + , - , A , etc. • Pressing the SHIFT or ALPHA key follo ...

  • Casio FC200V - page 4

    E-2 • The following shows an example of how a key operation to select an on-screen menu item is represented in this User ’s Guide. Example: 1 (1-V AR) Indicates the menu item that is selected by the number key operation ( 1 ) before it. Note that this is not part of the actual key operation you perform. • The cursor key is marked with four ar ...

  • Casio FC200V - page 5

    E-3 Initializing the Calculator Perform the following procedure when you want to initialize the calculator and return the calculation mode and setup to their initial default settings. Note that this operation also clears all data currently in calculator memory . 1. O1 9 (CLR) 2. “All:EXE” ( cf ), then E . 3. E (Y es) 4. A •T o cancel initiali ...

  • Casio FC200V - page 6

    E-4 Safety Pr ecautions Be sure to read the following safety precautions before using this calculator . Keep this manual handy for later reference. Caution This symbol is used to indicate information that can result in personal injury or material damage if ignored. Battery • After removing the battery from the calculator , put it in a safe place ...

  • Casio FC200V - page 7

    E-5 Handling Pr ecautions • Be sure to press the O key before using the calculator for the first time. • Even if the calculator is operating normally , replace the battery at least once every three years (FC-200V) or two years (FC-100V). A dead battery can leak, causing damage to and malfunction of the calculator . Never leave a dead battery in ...

  • Casio FC200V - page 8

    E-6 • Never press the keys of the calculator with a ballpoint pen or other pointed object. • Use a soft, dry cloth to clean the exterior of the calculator . If the calculator becomes very dirty , wipe it off with a cloth moistened in a weak solution of water and a mild neutral household detergent. W ring out all excess liquid before wiping the ...

  • Casio FC200V - page 9

    E-7 Contents About this Manual ............................................ 1 Initializing the Calculator ................................ 3 Safety Precautions ........................................... 4 Handling Precautions ...................................... 5 Before Using the Calculator .......................... 10 k Removing the Hard Case ...

  • Casio FC200V - page 10

    E-8 Financial Calculation ..................................... 42 k Simple Interest Mode ........................................... 42 k Compound Interest Mode .................................... 44 k Cash Flow Mode .................................................. 50 k Amortization Mode ............................................... 55 k Conv ...

  • Casio FC200V - page 11

    E-9 Statistical Calculation .................................. 108 k Statistical Calculation T ypes .............................. 108 k Inputting Sample Data ....................................... 108 k ST A T Calculation Screen .................................... 1 1 1 k Using the ST A T Menu ......................................... 1 12 T ech ...

  • Casio FC200V - page 12

    E-10 Befor e Using the Calculator k Removing the Hard Case Before using the calculator , slide its hard case downwards to remove it, and then af fix the hard case to the back of the calculator as shown in the illustration below . k T urning Power On and Off • Press O to turn on the calculator . • Press 1A (OFF) to turn of f the calculator . k A ...

  • Casio FC200V - page 13

    E-11 k About the Display Y our calculator has a 31-dot × 96-dot LCD screen. Example: k Display Indicators Sample Display: This Means this: Page: indicator: The keypad has been shifted by 7 pressing the 1 key . The keypad will unshift and this indicator will disappear when you press a key . The alpha input mode has been entered by pressing the S ke ...

  • Casio FC200V - page 14

    E-12 This Means this: Page: indicator: ST A T The calculator is in the ST A T Mode. 360 360 days in a year . SI Simple interest for interest calcula- tions of odd (partial) months. DMY Day , month, year (DMY) as the date format. 7 The default angle unit is degrees. 8 The default angle unit is radians. 9 The default angle unit is grads. FIX A fixed ...

  • Casio FC200V - page 15

    E-13 Calculation Modes and Calculator Setup k Calculation Modes When you want to perform Press this Page: this type of operation: key: Simple interest calculations S E-42 Compound interest calculations c E-44 Cash flow calculations C E-50 Amortization calculations A E-55 General and function calculations m E-28 E-98 Statistical and regression a E-1 ...

  • Casio FC200V - page 16

    E-14 A Displaying the Setup Screen There are two different ways to display the setup screen. • Pressing the s key • Selecting the “Set:” item on the menu screen that appears when you enter some modes. The following are the procedures you need to perform to access and use the setup screen using the above operations. FC-200V Important! All of ...

  • Casio FC200V - page 17

    E-15 1. On the menu that appears when you initially enter a mode, use fc to select “Set:”, and then press E . • This displays a setup screen of settings that apply to the current mode only . The content of the setup screen depends on what mode you are currently in. 2. Use fc to select the setup item whose setting you want to change. Y ou can ...

  • Casio FC200V - page 18

    E-16 A Configuring Settings 1 Payment: Compound Interest (CMPD) Mode, Amortization (AMR T) Mode This setting specifies the payment date. 1:Begin Beginning of period 2:End End of period 1. Use fc to select “Payment”, and then press E . 2. Press 1 (1:Begin) or 2 (2:End) to select the setting you want. •Y ou can also use fc to select a setting a ...

  • Casio FC200V - page 19

    E-17 2. Press 1 (1:CI) or 2 (2:SI) to select the setting you want. •Y ou can also use fc to select a setting and then press E . 4 Periods/Y : Bond (BOND) Mode (FC-200V only) This setting specifies once a year (Annual) or twice a year (Semi-Annual) coupon payments. 1:Annual One coupon payment per year 2:Semi One coupon payment every six months 1. ...

  • Casio FC200V - page 20

    E-18 6 Date Input: Day Calculation (DA YS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies either month, day , year (MDY) or day , month, year (DMY) as the date format. 1:MDY Month, day , year 06012006 (June 1, 2006) 2:DMY Day , month, year 01062006 (June 1, 2006) 1. Use fc to select “Date Input”, and then press E . 2. Press 1 (1:M ...

  • Casio FC200V - page 21

    E-19 1. Use fc to select “B-Even”, and then press E . 2. Press 1 (1:Quantity) or 2 (2:Sales) to select the setting you want. •Y ou can also use fc to select a setting and then press E . 9 Digit Sep.: All modes except for the ST A T Mode and COMP Mode This setting specifies what type of 3-digit separator should be used. Note that the 3-digit s ...

  • Casio FC200V - page 22

    E-20 2. Press 1 (1:Deg), 2 (2:Rad), or 3 (3:Gra) to select the setting you want. •Y ou can also use fc to select a setting and then press E . ! Fix: All modes This setting specifies a fixed number of digits to the right of the decimal place. Calculation results are rounded of f to the specified number of digits before being displayed. • Changin ...

  • Casio FC200V - page 23

    E-21 # Norm: All modes This setting specifies the range that determines when display of values switches to exponential format. • Changing this setting automatically cancels any previous settings made for ! Fix and @ Sci. Norm1: 10 –2 >  x  ,  x  > 10 10 Norm2: 10 –9 >  x  ,  x  > 10 10 Example: 1 ÷ 200 = 5 ...

  • Casio FC200V - page 24

    E-22 % CONTRAST : All modes Select this setting when you want to adjust screen contrast and make display figures lighter or darker . 1. Use fc to select “CONTRAST”, and then press E . 2. Use d and e to adjust display contrast. 3. Press E . Note • On a setting screen, the cursor mark displayed on the upper right of a screen cannot be used. A I ...

  • Casio FC200V - page 25

    E-23 Inputting Expr essions and V alues k Inputting a Calculation Expression Using Standard Format Y our calculator lets you input calculation expressions just as they are written. Then simply press the E key to execute it. The calculator automatically judges the calculation priority sequence for addition, subtraction, multiplication, and division, ...

  • Casio FC200V - page 26

    E-24 A Omitting the Multiplication Sign Y ou can omit the multiplication sign ( × ) in any of the following cases. • Before an open parentheses ( ( ): 2 × (5 + 4), etc. • Before a function with parenthesis: 2 × sin(30), 2 × ' (3), etc. • Before a variable name, constant, or random number: 20 × A, 2 × π , etc. A Final Closed Parent ...

  • Casio FC200V - page 27

    E-25 • Normally the input cursor appears as a straight vertical ( I ) or horizontal ( ) flashing line on the display screen. When there are 10 or fewer bytes of input remaining in the current expression, the cursor changes shape to I to let you know . If the I cursor appears, terminate the expression at a convenient point and calculate the result ...

  • Casio FC200V - page 28

    E-26 A Deleting a Character or Function Example: To correct the expression 369 × × 12 so it becomes 369 × 12 Insert Mode: 369**12 dd Y Overwrite Mode: 369**12 ddd Y A Correcting a Calculation Example: To correct cos(60) so it becomes sin(60) Insert Mode: 1 2 (cos) 60) ddd Y 1 1 (sin) Overwrite Mode: 1 2 (cos) 60) dddd 1 1 (sin) ...

  • Casio FC200V - page 29

    E-27 A Inserting input into a Calculation Always use the insert mode for this operation. Use d or e to move the cursor to the location where you want to insert new input, and then input what you want. k Displaying the Location of an Error If an error message (like “Math ERROR” or “Syntax ERROR”) appears when you press E , press d or e . Thi ...

  • Casio FC200V - page 30

    E-28 Basic Calculations This section explains how to perform arithmetic and percent calculations. All calculations in this section are performed in the COMP Mode ( g ). k Arithmetic Calculations Use the + , - , * , and / keys to perform arithmetic calculations. Example: 7 × 8 – 4 × 5 = 36 7*8-4*5 E • The calculator automatically judges the ca ...

  • Casio FC200V - page 31

    E-29 A Omitting a Final Closed Parenthesis Y ou can omit any closed parenthesis ( ) ) immediately preceding operation of the E key at the end of a calculation. Example: (2 + 3) × (4 – 1) = 15 (2+3)* (4-1 E k Percent Calculations Example 1: 2% = 0.02 2 1 ( (%) E Example 2: 150 × 20% = 30 150*20 1 ( (%) E Example 3: To calculate what percentage o ...

  • Casio FC200V - page 32

    E-30 Example 5: To discount 3500 by 25%. 3500- 3500* 25 1 ( (%) E Example 6: To discount the sum of 168, 98, and 734 by 20%. 168+98+ 734 E - G *20 1 ( (%) E Example 7: If 300 grams are added to a test sample originally weighing 500 grams, what is the percentage increase in weight? 300+500 1 . ( A %) Example 8: What is the percentage change when a v ...

  • Casio FC200V - page 33

    E-31 Example 9: To calculate the selling price and profit when the purchase price is $480 and the profit rate to the selling price is 25%. 480*25 1 . ( A %) 480/25 1 . ( A %) Example 10: To calculate the bargain price and loss when the purchase price is $130 and the loss rate is 4%. 130* y 4 1 . ( A %) 130/ y 4 1 . ( A %) ...

  • Casio FC200V - page 34

    E-32 Using Multi-statements in Calculations Y ou can use the colon character (:) to connect two or more expressions and execute them in sequence from left to right when you press E . Example: To create a multi-statement that performs the following two calculations: 3 + 3 and 3 × 3 Insert Mode: 1. 3+3 2. t 3. “ : ” ( fc ), then E . 4. 3*3 E Dis ...

  • Casio FC200V - page 35

    E-33 Using Calculation Histor y Memor y and Replay Calculation history memory maintains a record of each calculation expression you input and execute, and its result. Y ou can use calculation history memory in the COMP Mode ( g ) only . A Recalling Calculation History Memory Contents Press f to back-step through calculation history memory contents. ...

  • Casio FC200V - page 36

    E-34 A Replay Function While a calculation result is on the display , you can press d or e to edit the expression you used for the previous calculation. Example: 4 × 3 + 2.5 = 14.5 4 × 3 – 7.1 = 4.9 4*3+2.5 E A d YYYY -7.1 E ...

  • Casio FC200V - page 37

    E-35 Using Calculator Memor y Memory Name Description Answer Memory Stores the last calculation result obtained. Independent Calculation results can be added to Memory o r subtracted from independent memory . The “M” display indicator indicates data in independent memory . V ariables Six variables named A, B, C, D, X, and Y can be used for stor ...

  • Casio FC200V - page 38

    E-36 A Using Answer Memory to Perform a Series of Calculations Example: To divide the result of 3 × 4 by 30 3*4 E (Continuing) /30 E Pressing / automatically inputs “Ans” command. • With the above procedure, you need to perform the second calculation immediately after the first one. If you need to recall Answer Memory contents after pressing ...

  • Casio FC200V - page 39

    E-37 k Independent Memory (M) Y ou can add calculation results to or subtract results from independent memory . The “M” appears on the display when independent memory contains a value. A Independent Memory Overview • The following is a summary of the dif ferent operations you can perform using independent memory . To do this: Perform this key ...

  • Casio FC200V - page 40

    E-38 • The “M” indicator appears in the upper left of the display when there is any value other than zero stored in independent memory . • Independent memory contents are maintained even if you press the A key , change the calculation mode, or turn of f the calculator . A Calculation Examples Using Independent Memory • If the “M” indi ...

  • Casio FC200V - page 41

    E-39 • Use the following procedure when you want to check the contents of a variable. Example: T o recall the contents of variable A S n (A) • The following shows how you can include variables inside of an expression. Example: T o multiply the contents of variable A by the contents of variable B S n (A) * S o (B) E •Y ou can also assign a fin ...

  • Casio FC200V - page 42

    E-40 9. S o (B) / S D (C) E k Financial Calculation V ariables (V ARS) • The following are the names of the financial calculation variables (V ARS): n , I , PV , PMT , FV , P/Y , C/Y , PM1, PM2, Dys. • Financial calculation variables are used in financial calculations to store values. See the sections that describe the various modes for informa ...

  • Casio FC200V - page 43

    E-41 k Clearing Memory Contents Use the following procedure to clear the contents of Answer Memory , independent memory , and all of the variables. This procedure does not clear V ARS memory contents. See “Clearing the Contents of V ARS Memories Only” for more information. 1. O1 9 (CLR) 2. “Memory:EXE” ( fc ), then E . 3. E (Y es) 4. A •T ...

  • Casio FC200V - page 44

    E-42 Financial Calculation k Simple Interest Mode • The Simple Interest (SMPL) Mode lets you calculate the interest amount and/or simple future value (principal and interest amount). A Entering the SMPL Mode • Press S to enter the SMPL Mode. V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples 1 Set* Days in Y ear (Da ...

  • Casio FC200V - page 45

    E-43 • Press 2 to select “365”. • Use fc to select 2 “Dys”, input 120, and then press E . • Use fc to select 3 “ I ”, input 5, and then press E . • Use fc to select 4 “PV”, input 10000, and then press E . 2. Select the value you want to calculate. • For this example, use fc to select “ALL: Solve”. 3. Press 9 to perform ...

  • Casio FC200V - page 46

    E-44 A SMPL Mode Financial Calculation V ariables (V ARS) •V ariables Dys, I , and PV are used in the SMPL Mode. • The values of SMPL Mode variables are retained even if you change to another mode. Note, however , that SMPL Mode variables are also used by other modes, so performing an input or calculation operation may change the values assigne ...

  • Casio FC200V - page 47

    E-45 A Setting V alues No. Display Name V alues Used in Examples 1 Set* 1 Payment Period (Payment) End 2 n Number of Payments 48 3 I Interest Rate 4% 4 PV Present V alue (Principal) –$1,000 5 PMT Payment Amount –$300 Future V alue (Principal and 6 FV Interest, or Final Payment $16,760 Amount) 7 P/Y Number of Annual Payments 12 (PMT) 8 C/Y* 2 Nu ...

  • Casio FC200V - page 48

    E-46 A Basic CMPD Mode Procedure Example 1: To calculate the future value (FV) of an investment vehicle that pays an annual interest rate of 4%, when the initial deposit is $1,000 and additional deposits of $300 are made each month 1. Input the required values from the Setting V alues table (page E-45). • For this example, use fc to select 1 “S ...

  • Casio FC200V - page 49

    E-47 3. Press l to perform the calculation. A Calculating the Number of Payments ( n ), Interest Rate ( I %), Present V alue (Principal: PV), and Payment Amount (PMT) • Use the same procedure as shown under “Example 1” (page E-46), substituting the required values. A Calculating the Number of Months when a Partial Month is Included The follow ...

  • Casio FC200V - page 50

    E-48 A Selecting Interest Calculation for a Period with a Partial Month •Y ou can select compound interest or simple interest to calculate interest for a period with a partial month. Before performing each type of calculation, first use Configuring Settings (page E-16) to select either compound interest or simple interest for the dn setting. A CM ...

  • Casio FC200V - page 51

    E-49 u u u u u I % i (ef fective interest rate) i (ef fective interest rate) is calculated using Newton's Method. γ × PV + α × PMT + β × FV = 0 To I % from i (ef fective interest rate) I % = 0 PV = – ( PMT × n + FV ) FV = – ( PMT × n + PV ) PMT = – n PV + FV n = PMT PV + FV – = (1 + i × S ) × , = (1 + i ) i 1 – (– Intg ( ...

  • Casio FC200V - page 52

    E-50 n : Number of Payments I %: Interest Rate PV : Present V alue (Principal) PMT : Payment Amount FV : Future V alue (Principal and Interest, or Final Payment Amount) P/Y : Number of Annual Payments (PMT) C/Y : Number of Annual Compoundings Note • This calculator performs interest ( I ) calculations using Newton’ s Method, which produces appr ...

  • Casio FC200V - page 53

    E-51 A Entering the CASH Mode • Press C to enter the CASH Mode. V alue Input Screen A cash flow diagram like the one shown below helps to visualize the movement of funds. With this graph, the initial investment amount is represented by CF 0 . The cash flow one year later is shown by CF 1 , two years later by CF 2 , and so on. A Setting V alues No ...

  • Casio FC200V - page 54

    E-52 A Basic CASH Mode Procedure Example 1: To calculate net present value (NPV) 1. Input the annual interest ( I ), and then receipt and payment values provided on page E-51. • Use fc to select 1 “ I ”, input 3, and then press E . • Use fc to select “Csh =D.Editor x ”, and then press E . This displays the DataEditor . Only the x -colum ...

  • Casio FC200V - page 55

    E-53 A Other CASH Mode Calculations Example 2: To calculate the internal rate of return (IRR) • In step 3 of the basic procedure (Example 1), select “IRR:Solve”. • The IRR calculation result is assigned to financial variable (V ARS) I . Example 3: To calculate the payback period (PBP) • In step 3 of the basic procedure (Example 1), select ...

  • Casio FC200V - page 56

    E-54 • Though I is a financial calculation variable, it is also used by arithmetic and function operations in the COMP Mode. A Calculation Formulas u NPV n : natural number up to 79 u NFV u IRR IRR is calculated using Newton’ s Method. In this formula, NPV = 0, and the value of IRR is equivalent to i × 100. It should be noted, however , that m ...

  • Casio FC200V - page 57

    E-55 k Amortization Mode • The Amortization (AMRT) Mode lets you calculate the principal balance, and the interest portion and principal portion of monthly payments, as well as interest and principal amounts paid to date. BAL : Principal balance upon completion of payment PM2 INT : Interest portion of payment PM1 PRN : Principal portion of paymen ...

  • Casio FC200V - page 58

    E-56 d :T otal principal paid from payment PM1 to payment PM2 ( Σ PRN) e :T otal interest paid from payment PM1 to payment PM2 ( Σ INT) A Setting V alues No. Display Name V alues Used in Examples 1 Set* 1 Payment Period (Payment) End 2 PM1 Payment PM1 15 (Number of Payments) 3 PM2 * 2 Payment PM2 28 (Number of Payments) 4 n * 3 Number of Payments ...

  • Casio FC200V - page 59

    E-57 * 1 For information about specifying the payment period, see the “Payment” item under “Configuring Settings” on page E-16. * 2 Make sure the payment you specify for PM2 comes after the payment you specify for PM1. * 3 This variable is used by other modes. The value that initially appears may be a value that was input or calculated in a ...

  • Casio FC200V - page 60

    E-58 2. Select the value you want to calculate. • For this example, use fc to select “BAL: Solve”. 3. Press l to perform the calculation. • Pressing the E key returns to the value input screen. A Other AMRT Mode Calculations Example 2: To calculate the interest amount (INT) included in payment 15 (PM1) • In step 2 of the basic procedure ( ...

  • Casio FC200V - page 61

    E-59 A Calculation Formulas a : Interest portion of payment PM1 (INT) INT PM1 = I BAL PM1–1 × i I × ( PMT sign ) b : Principal portion of payment PM1 (PRN) PRN PM1 = PMT + BAL PM1–1 × i c : Principal balance upon completion of payment PM2 (BAL) BAL PM2 = BAL PM2–1 + PRN PM2 d :T otal principal paid from payment PM1 to payment PM2 ( Σ PRN) ...

  • Casio FC200V - page 62

    E-60 A Entering the CNVR Mode • Press n to enter the CNVR Mode. V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples 1 n Number of Annual 6 Compoundings 2 I Interest Rate (Annual) 3% A Basic CNVR Mode Procedure Example 1: To convert a nominal interest rate (APR) to an ef fective interest rate (EFF) 1. Input the number o ...

  • Casio FC200V - page 63

    E-61 A Other CNVR Mode Calculations Example 2: To convert an ef fective interest rate (EFF) to a nominal interest rate (APR) • In step 2 of the basic procedure (Example 1), select “APR: Solve”. A CNVR Mode Financial Calculation V ariables (V ARS) •V ariables n and I are used in the CNVR Mode. •A value is assigned to I whenever you perform ...

  • Casio FC200V - page 64

    E-62 A Entering the COST Mode • Press o to enter the COST Mode. V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples 1 CST Cost $40 2 SEL Selling Price $100 3 MRG Margin 60% A Basic COST Mode Procedure Example 1: To calculate the margin (MRG) 1. Input the cost (CST) and selling price (SEL) values from the Setting V alue ...

  • Casio FC200V - page 65

    E-63 A Other COST Mode Calculations Example 2: To calculate the cost based on margin and selling price 1. Input the margin (MRG) and selling price (SEL) values in step 1 of the basic procedure (Example 1). 2. Select 1 “CST” in step 2. Example 3: To calculate the selling price (SEL) based on margin and cost 1. Input the margin (MRG) and cost (CS ...

  • Casio FC200V - page 66

    E-64 k Day Calculation Mode • The Day Calculation (DA YS) Mode lets you calculate the number of dates from one date to another , the date that falls on a specific number of days after a starting date, and the date that falls on a specific number of data prior to an ending date. • Starting date (d1) and ending date (d2) calculations are possible ...

  • Casio FC200V - page 67

    E-65 * 2 •Y ou must input two digits for the month and day . This means you should include a leading zero for values from 1 through 9 (01, 02, 03... etc.). •Y ou can specify either month, day , year (MDY) or day , month, year (DMY) as the date input format. See the “Date Input” setting under “Configuring Settings” (page E-16). Note • ...

  • Casio FC200V - page 68

    E-66 A Other DA YS Mode Calculations Note • For Example 2 and Example 3, use the setup screen to change the “Date Mode” setting to “365”. • Calculation results “d1” and “d2” are not stored in Answer Memory . Example 2: To calculate date that falls a specific number of days (Dys) from a starting date (d1) 1. In step 1 of the basi ...

  • Casio FC200V - page 69

    E-67 A Entering the DEPR Mode • Press d to enter the DEPR Mode. V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples 1 n Useful Life 6 2 I * 1 Depreciation Ratio 25% Factor 200 3 PV Original Cost (Basis) $150,000 4 FV Residual Book V alue $0 5 j Y ear for Calculation of Y ear 3 Depreciation Cost 6 YR1 Number of Months i ...

  • Casio FC200V - page 70

    E-68 • Use fc to select 2 “ I ”, input 25, and then press E . Note that you need to input 2 “ I ” only when you are using the fixed percent (FP) or declining balance (DB) method. • Use fc to select 3 “PV”, input 150000, and then press E . • Use fc to select 4 “FV”, input 0, and then press E . • Use fc to select 5 “ j ”, ...

  • Casio FC200V - page 71

    E-69 A DEPR Mode Financial Calculation V ariables (V ARS) •V ariables n , I , PV , and FV are used in the DEPR Mode. • The values of DEPR Mode variables are retained even if you change to another mode. Note, however , that DEPR Mode variables are also used by other modes, so performing an input or calculation operation may change the values ass ...

  • Casio FC200V - page 72

    E-70 u Fixed Percentage Method Fixed percentage method can be used to calculate depreciation for a given period, or to calculate the depreciation rate. FP j : depreciation charge for the j th year RDV j : remaining depreciable value at the end of j th year I %: depreciation ratio u Sum-of-the-Y ear ’ s Digits Method The sum-of-the-year ’s-digit ...

  • Casio FC200V - page 73

    E-71 u Declining Balance Method The declining balance method calculates depreciation for a given period. DB j : depreciation charge for the j th year RDV j : remaining depreciable value at the end of j th year I %: factor k Bond Mode (FC-200V only) • The Bond (BOND) Mode lets you calculate purchase price and annual yield. A Entering the BOND Mode ...

  • Casio FC200V - page 74

    E-72 No. Display Name V alues Used in Examples 4 n Number of Coupon 3 Payments Until Maturity 5 RDV* 4 Redemption Price per $100 $100 of face value 6 CPN* 5 Coupon Rate 3% 7 PRC* 6 Price per $100 of face value –97.61645734 8 YLD Annual Y ield 4% * 1 •Y ou can specify a date (Date) or a number of coupon payments (T erm) as the term for bond calc ...

  • Casio FC200V - page 75

    E-73 Note •Y ou can specify a starting date (d1) in the range of January 1,1902 through December 30, 2097. •Y ou can specify an ending date (d2) in the range of January 2,1902 through December 31, 2097. • Input money paid out as a negative value, using the y key to input the minus sign. A Other Setup Items • The initial setting of Date Mode ...

  • Casio FC200V - page 76

    E-74 • Press 1 to select “Date”. • Use fc to select 2 “d1”, input 06012004, and then press E . • Use fc to select 3 “d2”, input 12152006, and then press E . • Use fc to select 5 “RDV”, input 100, and then press E . • Use fc to select 6 “CPN”, input 3, and then press E . • Use fc to select 8 “YLD”, input 4, and th ...

  • Casio FC200V - page 77

    E-75 Example 3: To calculate a bond purchase price (PRC) based on a specific number of payments (T erm) 1. In step 1 of the basic procedure (Example 1), select 2 (T erm) for “Bond Date”. • This replaces input items d1 and d2 with input item n . 2. Input 3 for item n . Example 4: To calculate the annual yield (YLD) based on a specific number o ...

  • Casio FC200V - page 78

    E-76 D Issue date Redemption date (d2) Purchase date (d1) Coupon Payment dates A B A Calculation Formulas PRC : price per $100 of face value CPN : coupon rate (%) YLD : annual yield (%) A : accrued days M : number of coupon payments per year (1 = Annual, 2 = Semi-Annual) N : number of coupon payments until maturity ( n is used when “T erm” is s ...

  • Casio FC200V - page 79

    E-77 + × D A CPN PRC = – INT = – – RDV (1+ ) M YLD/ 100 (1+ ) M YLD/ 100 M CPN Σ N k =1 ( N –1+ B/D ) ( k –1+ B/D ) CST = PRC + INT × D A M CPN M PRC = – – RDV M CPN (1+ ) M YLD/ 100 n (1+ ) M YLD/ 100 k INT = 0 CST = PRC Σ n k =1 • For more than one coupon period to redemption T erm (Using the Setup Screen: Bond Date) u Annual ...

  • Casio FC200V - page 80

    E-78 k Break-Even Mode (FC-200V only) • The Break-Even (BEVN) Mode has six sub-modes that you can use to perform various break-even point calculations. A Entering the BEVN Mode • Press B to enter the BEVN Mode. A BEVN Mode Sub-modes BEV :B reak-even point sales quantity and sales amount, sales quantity and sales amount that attains a profit tar ...

  • Casio FC200V - page 81

    E-79 A Entering the BEV Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select “BEV :EXE”. 3. Press E . V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples Profit or Profit Ratio PRF (Profit) 1 Set* 1 (PRF/Ratio) Sales Quantity or Sales Quantity Amount (B-Even) (Sales Quantity) 2 PRC Sales Price $100/u ...

  • Casio FC200V - page 82

    E-80 A Basic BEV Sub-mode Procedure Example 1: To calculate the break-even point sales quantity (QBE) 1. Input the values for 1 , 2 , 3 , 4 , and 5 from the Setting V alues table (page E-79). • For this example, use fc to select 1 “Set:”, and then press E . • Use fc to select “PRF/Ratio”, and then press E . • Press 1 to select “PRF? ...

  • Casio FC200V - page 83

    E-81 3. Press l to perform the calculation. A Other BEV Sub-mode Calculations Example 2: To calculate the break-even point sales amount (SBE) 1. Select 2 (Sales) for “B-Even” in step 1 of the basic procedure (Example 1). 2. In step 2, select “SBE”. Example 3: To calculate the sales quantity (QBE) required to attain a profit target ($400,000 ...

  • Casio FC200V - page 84

    E-82 A BEV Sub-mode Financial Calculation V ariables (V ARS) •V ariables PRC, VCU, FC, PRF , r %, QBE, and SBE are used in the BEV sub-mode. • BEV sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV , MOS, DOL, DFL, DCL, QTY CONV .). A Calculation Formulas u Profit (Setup Screen PRF ...

  • Casio FC200V - page 85

    E-83 A Entering the MOS Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select “MOS:EXE”. 3. Press E . V alue Input Screen A Setting V alues No. Display Name V alues Used in Examples 1 SAL Sales Amount $1,200,000 2 SBE Break-even Sales Amount $1,000,000 3 MOS Margin of Safety 0.1667(16.67%) A Basic MOS Sub-mode Procedure Example ...

  • Casio FC200V - page 86

    E-84 A Other MOS Sub-mode Calculations Example 2: To calculate a sales amount (SAL) or break- even sales amount (SBE) • Use the basic procedure (Example 1), substituting the required values. A MOS Sub-mode Financial Calculation V ariables (V ARS) •V ariables SAL, SBE, and MOS are used in the MOS sub- mode. • MOS sub-mode variable contents are ...

  • Casio FC200V - page 87

    E-85 A Setting V alues No. Display Name V alues Used in Examples 1 SAL Sales Amount $1,200,000 2 VC V ariable Cost $600,000 3 FC Fixed Cost $200,000 4 DOL Degree of Operating Leverage 1.5 A Basic DOL Sub-mode Procedure Example 1: To calculate the degree of operating leverage (DOL) 1. Input the required values from the Setting V alues table above. ? ...

  • Casio FC200V - page 88

    E-86 A DOL Sub-mode Financial Calculation V ariables (V ARS) •V ariables SAL, VC, FC, and DOL are used in the DOL sub-mode. • DOL sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV , MOS, DOL, DFL, DCL, QTY CONV .). A Calculation Formula SAL : Sales Amount VC :V ariable Cost FC : F ...

  • Casio FC200V - page 89

    E-87 A Basic DFL Sub-mode Procedure Example 1: To calculate the degree of financial leverage (DFL) 1. Input the required values from the Setting V alues table (page E-86). • For this example, use fc to select 1 “EIT”, input 400000, and then press E . • Use fc to select 2 “ITR”, input 80000, and then press E . 2. Select the value you wan ...

  • Casio FC200V - page 90

    E-88 A Calculation Formula EIT : Earnings Before Interest and T axes (EBIT) ITR : Interest DFL : Degree of Financial Leverage k Degree of Combined Leverage Sub- mode (Break-Even Mode 5) • The Degree of Combined Leverage (DCL) sub-mode lets you calculate the degree of operating leverage (percent change in profit due to a change in sales amount), w ...

  • Casio FC200V - page 91

    E-89 A Basic DCL Sub-mode Procedure Example 1: To calculate the degree of combined leverage (DCL) 1. Input the required values from the Setting V alues table (page E-88). • For this example, use fc to select 1 “SAL”, input 1200000, and then press E . • Use fc to select 2 “VC”, input 600000, and then press E . • Use fc to select 3 “F ...

  • Casio FC200V - page 92

    E-90 A Calculation Formula SAL : Sales Amount VC :V ariable Cost FC : Fixed Cost ITR : Interest DCL : Degree of Combined Leverage k Quantity Conversion Sub-mode (Break-Even Mode 6) • The Quantity Conversion (QTY CONV .) sub-mode lets you calculate the sales amount, sales price, or sales quantity after inputting the other two values. •Y ou can a ...

  • Casio FC200V - page 93

    E-91 A Setting V alues No. Display Name V alues Used in Examples 1 SAL Sales Amount $100,000 2 PRC Sales Price $200/unit 3 QTY Sales Quantity 500 units 4 VC V ariable Cost $15,000 5 VCU Unit V ariable Cost $30/unit 6 QTY Sales Quantity 500 units A Basic QTY CONV . Sub-mode Procedure Example 1: To calculate the sales quantity (QTY) from the sales am ...

  • Casio FC200V - page 94

    E-92 Example 3: To calculate the sales quantity (QTY) from variable cost and unit variable cost 1. Input the required values from among 4 , 5 , and 6 in the Setting V alues table (page E-91). • In this example, use fc to select 4 “VC”, input 15000, and then press E . • Use fc to select 5 “VCU”, input 30, and then press E . 2. Select the ...

  • Casio FC200V - page 95

    E-93 SAL = PRC × QTY VC = VCU × QTY A Calculation Formulas SAL : Sales Amount PRC : Sales Price QTY : Sales Quantity VC :V ariable Cost VCU : Unit V ariable Cost ...

  • Casio FC200V - page 96

    E-94 Shor tcuts k Custom Shortcut Keys Y ou can assign a mode, setup information, a value, or a calculation expression to a shortcut key for instant access whenever you need it. This feature comes in handy when you need to often perform the same calculation or input the same data. A Using Shortcut Keys Example: To configure the shortcut keys to sim ...

  • Casio FC200V - page 97

    E-95 5. Use fc to select “Shortcut1”, and then press E . 6. In response to the confirmation screen that appears, press E (Y es). • If you want to cancel this operation without assigning anything to 1 (Shortcut1) key , press E instead of E in step 6. u T o configure the SHORTCUT2 key 1. Press m to enter the COMP Mode. 2. Input the formula show ...

  • Casio FC200V - page 98

    E-96 3. Use fc to select “FV”, and then press l to perform the calculation. • This calculates the future value of the investment after five years. The result appears on the display and is stored in Answer Memory (Ans). 4. Press 2 (Shortcut2). • This recalls the formula (for calculating tax) assigned to the 2 (Shortcut2) key . 5. Press E . ? ...

  • Casio FC200V - page 99

    E-97 u To configure an FMEM key Example: To assign the function “sin –1 ” to the FMEM1 key 1. Press m to enter the COMP Mode. 2. (1) t (2) “sin –1 ” ( fc ), then E . 3. Press 1t (ST O). •A number sign (#) next to “FMEM1” or “FMEM2” indicates that there is already data assigned to the key . Performing the following steps will r ...

  • Casio FC200V - page 100

    E-98 Function Calculations This section explains how to use the calculator ’s built-in functions. • Certain function calculations may take some time to display calculation results. Before performing an operation, be sure to wait until execution of the current operation is complete. Y ou can interrupt an ongoing operation by pressing A . • Pre ...

  • Casio FC200V - page 101

    E-99 Example: sin 30 = 0.5, sin –1 0.5 = 30 z 1 1 (sin) 30) E 1. t 2. “sin –1 ” ( fc ), then E . 3. 0.5) E k Hyperbolic and Inverse Hyperbolic Functions Example: sinh 1 = 1.175201 194, cosh –1 1 = 0 1. t 2. “sinh” ( fc ), then E . 3. 1) E 1. t 2. “cosh –1 ” ( fc ), then E . 3. 1) E k Converting an Input V alue to the Calculator ...

  • Casio FC200V - page 102

    E-100 z ( 1 5 ( π ) /2) 1G (DRG ' ) 2 ( r ) E 50 1G (DRG ' ) 3 ( g ) E Example 2: cos ( π radians) = –1, cos (100 grads) = 0 z 1 2 (cos) 1 5 ( π ) 1G (DRG ' ) 2 ( r ) ) E 1 2 (cos) 100 1G (DRG ' ) 3 ( g ) ) E Example 3: cos –1 (–1) = 180 cos –1 (–1) = π z 1. t 2. “cos –1 ” ( fc ), then E . 3. y 1) E Z 1. t 2. ...

  • Casio FC200V - page 103

    E-101 Example 1: log 2 16 = 4 1. t 2. “log(” ( fc ), then E . 3. 2 1 ) (,) 16) E Example 2: log16 = 1.2041 19983 1. t 2. “log(” ( fc ), then E . 3. 16) E A base of 10 (common logarithm) is used if no base is specified. Example 3: ln 90 (= log e 90) = 4.49980967 1. t 2. “ln(” ( fc ), then E . 3. 90) E Example 4: ln e = 1 1. t 2. “ln(? ...

  • Casio FC200V - page 104

    E-102 Example 2: (1 + 1) 2+2 = 16 1. (1+1) t 2. “^(” ( fc ), then E . 3. 2+2) E Example 3: 2 3 = 8 1. 2 t 2. “3” ( fc ), then E . 3. E Example 4: ( ' 2 + 1) ( ' 2 – 1) = 1 1. ( t 2. “ ' (” ( fc ), then E . 3. 2)+1)( t 4. “ ' (” ( fc ), then E . 5. 2)-1) E Example 5: 5 32 = 2 1. 5 t 2. “ x ' (” ( fc ), ...

  • Casio FC200V - page 105

    E-103 k Rectangular-Polar Coordinate Conversion Rectangular Polar Coordinates Coordinates (Rec) (Pol) Converting to Polar Coordinates (Pol) Pol(X, Y) X: Specifies the rectangular coordinate X value Y: Specifies the rectangular coordinate Y value • Calculation result θ is displayed in the range of –180 ° < θ < 180 ° . • Calculation r ...

  • Casio FC200V - page 106

    E-104 Example 1: (X, Y) = ( ' 2, ' 2) → ( r , θ ) z 1. t 2. “ Pol(” ( fc ), then E . 3. 1 5 ( ' ) 2) 1 ) (,) 1 5 ( ' ) 2)) E Example 2: ( r , θ ) = (2, 30) → (X, Y) z 1. t 2. “ Rec(” ( fc ), then E . 3. 2 1 ) (,) 30) E k Other Functions This section explains how to use the functions shown below . !, Abs(, Ran#, n P ...

  • Casio FC200V - page 107

    E-105 A Absolute V alue Calculation (Abs) When you are performing a real number calculation, this function simply obtains the absolute value. Example: Abs (2 – 7) = 5 1. t 2. “Abs(” ( fc ), then E . 3. 2-7) E A Random Number (Ran#) This function generates a 3-digit pseudo random number that is less than 1. Example: To generate three 3-digit r ...

  • Casio FC200V - page 108

    E-106 A Permutation ( n P r ) and Combination ( n C r ) These functions make it possible to perform permutation and combination calculations. n and r must be integers in the range of 0 < r < n < 1 × 10 10 . Example: How many four-person permutations and combinations are possible for a group of 10 people? 1. 10 t 2. “P” ( fc ), then E ...

  • Casio FC200V - page 109

    E-107 (Calculation is performed internally using 15 digits.) 200/7 E FIX *14 E FIX The following performs the same calculation with rounding. 200/7 E FIX (Round the value to the specified number of digits.) 1 0 (Rnd) E FIX (Check rounded result.) *14 E FIX ...

  • Casio FC200V - page 110

    E-108 Statistical Calculation All calculations in this section are performed in the ST A T Mode ( 7 ). A Selecting a Statistical Calculation T ype In the ST A T Mode, display the statistical calculation type selection screen. k Statistical Calculation T ypes Use fc to select Item, and then press E . Menu Item Statistical Calculation 1-V AR Single-v ...

  • Casio FC200V - page 111

    E-109 A ST A T Editor Screen There are two ST A T editor screen formats, depending on the type of statistical calculation you selected. Single-variable Statistics Paired-variable Statistics • The first line of the ST A T editor screen shows the value for the first sample or for the values for their first pair of samples. A FREQ (Frequency) Column ...

  • Casio FC200V - page 112

    E-110 Example: To input the value 123.45 in cell X1 (Move the cursor to cell X1.) 123.45 S TAT E S TAT Registering a value causes the cursor to move down one cell. A ST A T Editor Screen Input Precautions • The number of lines in ST A T editor screen (the number of sample data values you can input) depends on the type of statistical data you sele ...

  • Casio FC200V - page 113

    E-111 A Editing Sample Data Replacing the Data in a Cell 1. On the ST A T editor screen, move the cursor to the cell you want to edit. 2. Input the new data value or expression, and then press E . Important! • Note that you must totally replace the existing data of the cell with new input. Y ou cannot edit parts of the existing data. Deleting a L ...

  • Casio FC200V - page 114

    E-112 k Using the ST A T Menu While the ST A T editor screen or ST A T calculation screen is on the display , press 17 (S-MENU) to display the ST A T menu. The content to the ST A T menu depends on whether the currently selected statistical operation type uses a single variable or paired variables. Single-variable Statistics Paired-variable Statist ...

  • Casio FC200V - page 115

    E-113 Paired-variable Menu Item Select this When you want to do this: menu item: Display the Reg sub-menu of commands for regression calculations • For details see “Commands when Lin- ear Regression Calculation (A+BX) Is 7 Reg Selected” on page E-1 17 and “Com- mands when Quadratic Regression Calculation (_+CX 2 ) Is Selected” on page E-1 ...

  • Casio FC200V - page 116

    E-114 MinMax Sub-menu ( 17 (S-MENU) 6 (MinMax)) Select this When you want to obtain this: menu item: 1 minX Minimum value 2 maxX Maximum value Single-variable Statistical Calculation Example 1: To select single-variable (1-V AR) and input the following data: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10} (FREQ: ON) Preparation 1. s 2. “ST A T” ( fc ), then E ...

  • Casio FC200V - page 117

    E-115 17 (S-MENU) S TAT 3 (Edit) 1 (Ins) cccccccc Y S TAT A S TAT Example 3: To edit the FREQ data to the following: {1, 2, 1, 2, 2, 2, 3, 4, 2, 1} (FREQ: ON) 17 (S-MENU) 2 (Data) e S TAT c 2 E c 2 E 2 E S TAT 2 E 3 E 4 E 2 E A S TAT • Examples 4 through 7 all use the same data as Example 3. Example 4: To calculate sum of squares of the sample da ...

  • Casio FC200V - page 118

    E-116 17 (S-MENU) 4 (Sum) S TAT 2 ( Σ x ) E Example 5: To calculate number of samples, mean, and population standard deviation. 17 (S-MENU) 5 (V ar) 1 (n) E S TAT 17 (S-MENU) 5 (V ar) S TAT 2 ( o ) E 17 (S-MENU) 5 (V ar) S TAT 3 ( x σ n ) E Example 6: To calculate minimum value and maximum value. 17 (S-MENU) 6 (MinMax) 1 (minX) E S TAT 17 (S-MENU ...

  • Casio FC200V - page 119

    E-117 A Commands when Linear Regression Calculation (A+BX) Is Selected With linear regression, regression is performed in accordance with the following model equation. y = A + BX The following are the commands that appear on the sub- menus that appear when you select 4 (Sum), 5 (V ar), 6 (MinMax), or 7 (Reg) on the ST A T menu while linear regressi ...

  • Casio FC200V - page 120

    E-118 Sum Sub-menu ( 17 (S-MENU) 4 (Sum)) Select this When you want to obtain this: menu item: 1 Σ x 2 Sum of squares of the X-data 2 Σ x Sum of the X-data 3 Σ y 2 Sum of squares of the Y -data 4 Σ y Sum of the Y -data 5 Σ xy Sum of products of the X-data and Y -data 6 Σ x 3 Sum of cubes of the X-data 7 Σ x 2 y Sum of (X-data squares × Y -d ...

  • Casio FC200V - page 121

    E-119 Reg Sub-menu ( 17 (S-MENU) 7 (Reg)) Select this When you want to obtain this: menu item: 1 A Regression coefficient constant term A 2 B Regression coefficient B 3 r Correlation coef ficient r 4 m Estimated value of x 5 n Estimated value of y Linear Regression Calculation • Examples 8 through 10 all use the data input in Example 7. Example 7 ...

  • Casio FC200V - page 122

    E-120 ce 1 E S TAT 1.1 E 1.2 E 1.3 E 1.4 E 1.5 E 1.6 E S TAT 1.7 E 1.8 E 2 E A S TAT Example 8: 17 (S-MENU) 4 (Sum) 5 ( Σ xy ) E S TAT 17 (S-MENU) 5 (V ar) 3 ( x σ n ) E S TAT 17 (S-MENU) 6 (MinMax) 4 (maxY) E S TAT ...

  • Casio FC200V - page 123

    E-121 Example 9: 17 (S-MENU) 7 (Reg) 1 (A) E S TAT 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E Example 10: Estimated V alue ( y = –3 → m = ?) y 3 17 (S-MENU) S TAT 7 (Reg) 4 ( m ) E Estimated V alue ( x = 2 → n = ?) 2 17 (S-MENU) S TAT 7 (Reg) 5 ( n ) E A Commands when Quadratic Regression Calculation (_+CX 2 ) Is Sele ...

  • Casio FC200V - page 124

    E-122 Calculation formula used for each command A = – B ( ) – C ( ) n Σ y n Σ x n Σ x 2 B = S xx . S x 2 x 2 – ( S xx 2 ) 2 S xy . S x 2 x 2 – S x 2 y . S xx 2 C = S xx . S x 2 x 2 – ( S xx 2 ) 2 S x 2 y . S xx – S xy . S xx 2 ( Σ x ) 2 Sxx = Σ x 2 – n Sxy = Σ xy – n ( Σ x . Σ y ) Sxx 2 = Σ x 3 – n ( Σ x . Σ x 2 ) Sx 2 ...

  • Casio FC200V - page 125

    E-123 • Sum sub-menu (sums), V ar sub-menu (number of samples, mean, standard deviation), and MinMax sub- menu (maximum value, minimum value) operations are the same those for linear regression calculations. Quadratic Regression Calculation • Examples 1 1 through 13 all use the data input in Example 7 (page E-1 19). Example 1 1: 17 (S-MENU) 1 ( ...

  • Casio FC200V - page 126

    E-124 Example 13: y = 3 → m 1 = ? 3 17 (S-MENU) 7 (Reg) S TAT 4 ( m 1 ) E y = 3 → m 2 = ? 3 17 (S-MENU) 7 (Reg) S TAT 5 ( m 2 ) E x = 2 → n = ? 2 17 (S-MENU) 7 (Reg) S TAT 6 ( n ) E A Comments for Other T ypes of Regression For details about the calculation formula of the command included in each regression type, refer to the indicated calcul ...

  • Casio FC200V - page 127

    E-125 ab Exponential Regression (A•B^X) A = exp ( ) n Σ ln y – B . Σ x B = exp ( ) n . Σ x 2 – ( Σ x ) 2 n . Σ x ln y – Σ x . Σ ln y r = { n . Σ x 2 – ( Σ x ) 2 }{ n . Σ ( ln y ) 2 – ( Σ ln y ) 2 } n . Σ x ln y – Σ x . Σ ln y m = ln B ln y – ln A n = AB x A = exp ( ) n Σ ln y – B . Σ x B = n . Σ x 2 – ( Σ x ) 2 ...

  • Casio FC200V - page 128

    E-126 A = n Σ y – B . Σ x –1 B = Sxx Sxy r = Sxx = Σ ( x –1 ) 2 – Sy y = Σ y 2 – Sxy = Σ ( x –1 ) y – Sxx . Syy Sxy n ( Σ x –1 ) 2 n Σ x –1 . Σ y m = y – A B n = A + x B n ( Σ y ) 2 Inverse Regression (1/X) A = exp ( ) n Σ ln y – B . Σ ln x B = n . Σ ( ln x ) 2 – ( Σ ln x ) 2 n . Σ ln x ln y – Σ ln x . Σ ln ...

  • Casio FC200V - page 129

    E-127 Comparison of Regression Curves • The following example uses the data input in Example 7 (page E-1 19). Example 14: To compare the correlation coefficient for logarithmic, e exponential, ab exponential, power , and inverse regression. (FREQ: OFF) 17 (S-MENU) 1 (T ype) ccc E (In X) A S TAT 17 (S-MENU) 7 (Reg) 3 (r) E 17 (S-MENU) 1 (T ype) S ...

  • Casio FC200V - page 130

    E-128 Other T ypes of Regression Calculation Example 15: y = A + B ln x 1. s 2. “ST A T” ( fc ), then E . 3. 2 (Off) 7 ccc E (ln X) 29 E 50 E 74 E S TAT 103 E 118 E ce 1.6 E 23.5 E S TAT 38 E 46.4 E 48.9 E A17 (S-MENU) S TAT 7 (Reg) 1 (A) E 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E x = 80 → n = ? 80 17 (S-MENU) S TAT ...

  • Casio FC200V - page 131

    E-129 Example 16: y = Ae B x 1. s 2. “ST A T” ( fc ), then E . 3. 2 (Off) 7 cccc E ( e ^X) 6.9 E 12.9 E 19.8 E S TAT 26.7 E 35.1 E ce 21.4 E 15.7 E S TAT 12.1 E 8.5 E 5.2 E A17 (S-MENU) S TAT 7 (Reg) 1 (A) E 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E x = 16 → n = ? 16 17 (S-MENU) S TAT 7 (Reg) 5 ( n ) E y = 20 → m = ...

  • Casio FC200V - page 132

    E-130 Example 17: y = AB x 1. s 2. “ST A T” ( fc ), then E . 3. 2 (Off) 7 ccccc E (A•B^X) y 1 E 3 E 5 E S TAT 10 E ce 0.24 E 4 E S TAT 16.2 E 513 E A17 (S-MENU) S TAT 7 (Reg) 1 (A) E 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E x = 15 → n = ? 15 17 (S-MENU) S TAT 7 (Reg) 5 ( n ) E y = 1.02 → m = ? 1.02 S TAT 17 (S-M ...

  • Casio FC200V - page 133

    E-131 Example 18: y = Ax B 1. s 2. “ST A T” ( fc ), then E . 3. 2 (Off) 7 cccccc E (A•X^B) 28 E 30 E 33 E S TAT 35 E 38 E ce 2410 E 3033 E 3895 E S TAT 4491 E 5717 E A17 (S-MENU) S TAT 7 (Reg) 1 (A) E 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E x = 40 → n = ? 40 17 (S-MENU) S TAT 7 (Reg) 5 ( n ) E y = 1000 → m = ? ...

  • Casio FC200V - page 134

    E-132 B Example 19: y = A + –– x 1. s 2. “ST A T” ( fc ), then E . 3. 2 (Off) 7 ccccccc E (1/X) 1.1 E 2.1 E S TAT 2.9 E 4 E 4.9 E ce 18.3 E S TAT 9.7 E 6.8 E 4.9 E 4.1 E A17 (S-MENU) S TAT 7 (Reg) 1 (A) E 17 (S-MENU) S TAT 7 (Reg) 2 (B) E 17 (S-MENU) S TAT 7 (Reg) 3 (r) E x = 3.5 → n = ? 3.5 17 (S-MENU) S TAT 7 (Reg) 5 ( n ) E y = 15 → ...

  • Casio FC200V - page 135

    E-133 A Command Usage T ips • The commands included in the Reg sub-menu can take a long time to execute in logarithmic, e exponential, ab exponential, or power regression calculation when there are a large number of data samples. ...

  • Casio FC200V - page 136

    E-134 T echnical Infor mation k Calculation Priority Sequence The calculator performs calculations according to a calculation priority sequence. • Basically , calculations are performed from left to right. • Expressions within parentheses have the highest priority . • The following shows the priority sequence for each individual command. 1. F ...

  • Casio FC200V - page 137

    E-135 Example: –2 2 = –4 1. y 2 2. t 3. “2” ( fc ), then E . 4. E (–2) 2 = 4 1. ( y 2) 2. t 3. “2” ( fc ), then E . 4. E Multiplication and division, and multiplication where the sign is omitted are the same priority (Priority 6), so these operations are performed from left to right when both types are mixed in the same calculation. E ...

  • Casio FC200V - page 138

    E-136 k Stack Limitations This calculator uses memory areas called stacks to temporarily store lower calculation priority sequence values, commands, and functions. The numeric stack has 10 levels and the command stack has 24 levels, as shown in the illustration below . A Stack ERROR occurs when the calculation you are performing causes the capacity ...

  • Casio FC200V - page 139

    E-137 k Calculation Ranges, Number of Digits, and Precision The calculation range, number of digits used for internal calculation, and calculation precision depends on the type of calculation you are performing. Calculation Range and Precision Calculation Range ± 1 × 10 –99 to ± 9.999999999 × 10 99 or 0 Number of Digits for Internal Calculati ...

  • Casio FC200V - page 140

    E-138 Functions Input Range tanh –1 x 0   x   9.999999999  10 –1 log x /ln x 0  x  9.999999999  10 99 10 x –9.999999999  10 99  x  99.99999999 e x –9.999999999  10 99  x  230.2585092 ' x 0  x  1  10 100 x 2  x  1  10 50 1/ x  x  1  10 100 ; x G 0 3 ' x  ...

  • Casio FC200V - page 141

    E-139 Financial Calculation Ranges P/Y Natural number from 1 to 9999 C/Y PM1 Integer from 1 to 9999 PM2 PM1 < PM2 January 1, 1901 through December 31, 2099 d1 January 1, 1902 through December 30, 2097 (BOND Mode only) January 1, 1901 through December 31, 2099 d2 January 2, 1902 through December 31, 2097 (BOND Mode only) j Positive natural number ...

  • Casio FC200V - page 142

    E-140 Depreciation Mode When calculating “Depreciation” One or more of “PV”, “FV”, “ i%” is negative value ................................................... Math ERROR n > 255 ............................................. Math ERROR j > n + 1 (YR1 G 12) ........................ Math ERROR YR1 > 12 ........................ ...

  • Casio FC200V - page 143

    E-141 Math ERROR Cause • The intermediate or final result of the calculation you are performing exceeds the allowable calculation range. •Y our input exceeds the allowable input range. • The calculation you are performing contains an illegal mathematical operation (such as division by zero). Action • Check the input values to ensure they ar ...

  • Casio FC200V - page 144

    E-142 the current expression, the cursor changes shape to I to let you know . If the I cursor appears, terminate the expression at a convenient point and calculate the result. Argument ERROR Cause • Financial conditions insuf ficient for financial calculations (such as YR1 > 12). Action • Check the input values to ensure they are within the ...

  • Casio FC200V - page 145

    E-143 Refer ence k Power Requirements and Battery Replacement FC-200V Y our calculator uses a TWO W A Y POWER system that combines a solar cell with G13 type button battery (LR44). Normally , calculators equipped with a solar cell alone can operate only when relatively bright light is present. The TWO W A Y POWER system, however , lets you continue ...

  • Casio FC200V - page 146

    E-144 4. Wipe a new battery with a dry cloth, and then load it into the calculator with its positive k side facing upwards (so you can see it). 5. Replace the battery cover and secure it in place with its screw . 6. Perform the following key operation: (1) O1 9 (CLR) (2) “All:EXE” ( fc ), then E (3) E (Y es) (4) A • Make sure you perform the ...

  • Casio FC200V - page 147

    E-145 1. Press 1A (OFF) to turn of f the calculator . 2. On the back of the calculator , remove the screws and the back cover . 3. Remove the old battery . 4. Load a new battery into the calculator with its positive k and negative l ends facing correctly . 5. Replace the back cover and secure it in place with its screws. 6. Perform the following ke ...

  • Casio FC200V - page 148

    E-146 Specifications FC-200V Power Requirements: Solar Cell: Built into the front of the calculator Button Battery: G13 T ype (LR44) × 1 Battery Life: Approximately 3 years (Based on one hour of operation per day .) Operating T emperature: 0 ° C to 40 ° C Dimensions: 12.2 (H) × 80 (W) × 161 (D) mm 1 / 2  (H)  3 1 / 8  (W)  6 5 / 16 ...

  • Casio FC200V - page 149

    SA0904-E CASIO COMPUTER CO. , L TD . 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan ...

Produzent Casio Kategorie Calculator

Dokumente, die wir vom Produzenten des Geräts Casio FC200V erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Casio
- Bedienungsanleitungen FC200V
- Produktkarten Casio
- Informationsbroschüren
- oder Energieetiketten Casio FC200V
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Casio FC200V.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Casio FC200V, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Casio FC200V. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Casio FC200V ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Casio FC200V, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Casio FC200V hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Casio FC200V verständlich ist.

Eine gänzliche Bedienungsanleitung von Casio sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Casio FC200V bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Casio FC200V befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Casio FC200V, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Casio FC200V - die uns die ersten Schritte während der Nutzung von Casio FC200V erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Casio FC200V hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Casio FC200V im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Casio FC200V?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Casio FC200V nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Casio FC200V hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)