-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 1
7.5x9-inch cover with bleed on 4 sides Enterasys Matrix ® DFE-Gold Series Hardware Installation Guide Module 4G4282-49 Module 4G4202-72 P/N 9034096-0 2 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 2
...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 3
i Notice Enterasys Networks reserv es the right to make changes in specif ications and other info rmation contained in this document and its web site without prior notice. The reader should in all cases consult Enterasys Netw orks ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 4
ii Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device com plies with Par t 15 of th e FCC rules. Operation is su bject to the following two conditions: (1) this device may not cause harmfu l interference, ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 5
iii Electromagnetic Compatibility (EMC) This product compli es with the following: 47 CFR Pa r t s 2 and 15, CSA C108.8, 2004/10 8/EC, EN 55022, EN 61000 ‐ 3 ‐ 2, EN 61000 ‐ 3 ‐ 3, EN 55024, AS/NZS CISPR 22, VCCI V ‐ 3. Compatibilid ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 6
iv Enterasys Customer Support at 353 61 705586 (Ireland). ѻ ѻ ક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ⒈㘨㣃 3%% ⒈Ѡ㣃䝮 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 7
v VCCI Notice This is a class A product based on the standard of the Vo l u n t a r y Cont rol Coun cil for Interferen ce by Information Te c h n o l o g y Equipment (VCCI). If this equipmen t is used in a domes tic environme nt, ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 8
vi Safety Information Class 1 Laser Transceivers The single mode interface modules use Class 1 la ser transceivers. Read the followi ng safe ty information befor e installing or o perating these modules. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 9
vii ENTERASYS NETWORKS, INC. FIRMWARE LICENSE AGREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“ Agreement”) betwee n the end user (“Y ou”) and Enterasys Net works, Inc. , on behalf of itse ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 10
viii 3. APPLICABLE LAW. This Agreem ent sh all be interpreted and governed under the laws and in the state and federal courts of th e Commonwealth of Massachusetts wit hout regard to its conflicts of laws provisions. You a ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 11
ix 8. AUDIT RIGHTS. You here by acknowled ge that the intellectu al property rights associated with the Program are of critical value to Enterasys, and, accordingly, You hereby agree to maintain complete books, re cords and accoun ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 12
x ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 13
ix Contents About This Guide Who Should Use This G uide .............. ............. .......... ............. ............. ............. ............. ......... ... .......... xiii How to Use This G uide ............. ............. ............. ......... ............. ............. ............. ............. ..... ............. xiv Related Docum ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 14
x Installing Module into Ma trix N1, N3, or N5 Chassis ............. .......... .......... ............. ............. ...... 3-14 Connecting to the Network . ................ .......... ............. .......... ............. ............. ............ .......... ............. 3-15 Connecting UTP Cables . ............. ............. .......... .... ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 15
xi Figures 1-1 4G4202-72 and 4G4282-49 DFE- Gold Modules ........ ............. ............. ......... ............. ............ 1-4 1-2 Optional 7G-6MGBIC and 7G-6 MG BIC-A Ethernet Interface Modules .. ................ ............. .. 1-5 3-1 Removing the Coverplate.... ............. ............. ............. .......... ............. ....... ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 16
xii Tables 1-1 Optional Ethernet Interface Modules, Compliance, and Physical Connections ................... .. 1-6 3-1 Contents of DFE-Gold Module Carton ............. ....... ............. ............. ......... ............. ............. .. 3-2 4-1 LANVIEW LEDs ............... ............. ............. ............. ......... ............. . ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 17
Matrix DFE-Gold Series Installation Guide xiii About This Guide This guide provide s an overview , installation and troubleshooting instructions, and specifications for the Enterasys Matr ix ® DFE ‐ Gold (Distributed Forwarding Eng ine) 4G4202 ‐ 72 and 4G4282 ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 18
How to Use This Guide xiv About This Guide How to Use This Guide Read through this guide completely to familiarize you r se l f with its contents and to gain an understanding of the features and capabilities of the DFE ‐ Gold modules. A general ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 19
Conventions Used in This Guide Matrix DFE-Gold Series Installation Guide xv Conventions Used in This Guide The following conventions are used in this guide. Lowercase x: Indicates the general use of an alphanumeric character (for example, 6x1xx, the x’ s indic ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 20
Conventions Used in This Guid e xvi About This Guide ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 21
Matrix DFE-Gold Series Installation Guide 1-1 1 Introduction This chapter provides an overview of the DFE ‐ Gold module capabilities, and introduces the 4G4202 ‐ 72 and 4G428 2 ‐ 49 DFE ‐ Gold mod ules and the optional uplink interface 7G ‐ 6MGBIC ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 22
Overview of DFE Series Capabilities 1-2 Introduction Overview of DFE Series Cap abilities The DFE ‐ Gold Series modules provide you with a larg e number of capabilities, including: • Support for high speed Gigabit Ethernet traffic to desktop devices •B e t t e ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 23
The DFE-Gold Modu les and Interface Options Matrix DFE-Gold Series Installation Guide 1-3 4G4202-72 The 4G4202 ‐ 72 is an edge ‐ network switch with 72, 10 BASE ‐ T/100BAS E ‐ TX/1000BASE ‐ T ports accessed through 72 front ‐ panel RJ45 connectors. 4G4282-49 The 4G4282 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 24
The DFE-Gold Modules and Interface Options 1-4 Introduction Figure 1- 1 4G4202-72 and 4 G4282-49 DFE-Gold Modules 1 OFFLINE/RESET switch 6 GROUP status LEDs 2 RJ45 COM (Console Port) 7 GROUP selected LEDs 3 CPU LED 8 4G4202-7 2 - Ports (49-72), 10/100/1000 Mbps, via 24 RJ45s 4 MGMT LED 4G4282-49 - Ethernet Interface Module option slot 5 GROUP SELEC ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 25
The DFE-Gold Modu les and Interface Options Matrix DFE-Gold Series Installation Guide 1-5 7G-6MGBIC and 7G-6MG BIC-A Gigabit Ethern et Interface Modules The 4G4282 ‐ 49 option slot provides access to an installed netw ork expansion module such as the 7G ‐ 6MGBIC and 7G ‐ 6MGB ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 26
Connectivity 1-6 Introduction Connectivity 4G4202-72 The 4G4202 ‐ 72 has 10BASE ‐ T/10 0BASE ‐ TX/1000BASE ‐ T compliant ports through 72, fixed RJ45 front panel connectors. 4G4282-49 Depending on how the 4G4282 ‐ 49 ( Figure 1 ‐ 1 ) is configured, it ca ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 27
Standards Compatibility Matrix DFE-Gold Series Installation Guide 1-7 Switch Configuration Using CLI Commands The CLI commands enable you to perform more complete switch configuration management tasks. For CLI command set information and how to configure the mod ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 28
LANVIEW Diagnostic LEDs 1-8 Introduction name in a RADIUS Filter ‐ ID attribute. An ad ministrator can also define a ro le to be implemented in the absence of an authentication framew ork. Refer to the release notes shipped with ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 29
Matrix DFE-Gold Series Installation Guide 2-1 2 Network Requirements This chapter provides information concerning the network requirements that must be me t to ensure a satisfactory performance from the DFE module. The information consists of the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 30
10BASE-T Network 2-2 Network Requirements In normal usage (and typical implementations) there is no need to enable/disable ports for Link Aggregation. The default va l u es will result in the maximum number of aggregati ons possible. If ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 31
1000BASE-T Network Matrix DFE-Gold Series Installation Guide 2-3 1000BASE-T Network The 4G4202 ‐ 72 and 4G4282 ‐ 49 support 10/100/10 00 Mbps by means of fixed RJ45 front panel connectors. These connections support copper wire connections that can oper ate u ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 32
1000BASE-T Network 2-4 Network Requirements ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 33
Matrix DFE-Gold Series Installation Guide 3-1 3 Installation This chapter provides the instructions to install the 4G4202 ‐ 72 and 4G4282 ‐ 49 DFE ‐ Gold modules, and an optional netw ork expansion module. A Phillips screwdriver is needed to instal ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 34
Unpacking the DFE-Gold Module 3-2 Installation Unp acking the DFE-Gold Module Unpack the DFE ‐ Gold modul e as follows: 1. Open the box and remov e the packing material protecting the DFE ‐ Gold module. 2. V erify the contents of the carton as listed ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 35
Installing Optional Network Expansion Modules Matrix DFE-Gold Series Installation Guide 3-3 Removing the Coverplate Refer to Figure 3 ‐ 1 and proceed as follows: 1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package). 2. ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 36
Installing Optional Network Expansion Modules 3-4 Installation Figure 3-2 Installing the Network Exp ansion Module 2. Use the two saved cov erplate screws to fasten the network expansion module to the DFE ‐ Gold module front panel. Do not tighten the two c ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 37
Installing an Optional Mini-GBIC Matrix DFE-Gold Series Installation Guide 3-5 Inst alling an Optional Mini-GBIC This section describes how to install a Mini ‐ GBIC in an optional 7G ‐ 6MGBIC or 7G ‐ 6MGBIC ‐ A. To prepare and install a Mini ‐ GBIC, refer to ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 38
Installing an Optional Mini-GBIC 3-6 Installation Inst allation To install a Mini ‐ GBIC with an MT ‐ RJ connection, ref er to Fig ure 3 ‐ 3 . For an LC connection, refer to Figure 3 ‐ 4 . For an RJ45 connection, refer to Figure 3 ‐ 5 . The ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 39
Installing an Optional Mini-GBIC Matrix DFE-Gold Series Installation Guide 3-7 Figure 3-4 Mini-GBIC with LC Connector Figure 3-5 Mini-GBIC with RJ45 Connector 1 Mini-GBIC (MGBIC-08, -LC01, -LC03, or -LC09) 4 Port slot 2 Mini-GBIC , top side 5 Mini-GBIC , protective dust cover 3 7-Pin edge conne ctor (insertion side) 6 Release tab 1 Mini-GBIC (MGBIC ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 40
Removing the Mini-GBIC 3-8 Installation Removing the Mini-GBIC To remove a Mini ‐ GBIC from a port slot, proceed as follows: 1. Attach the antistatic wrist strap (refer to the instructions in the antis tatic wrist strap package) before removing ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 41
Module Placement and Rules Matrix DFE-Gold Series Installation Guide 3-9 Module Placement and Rules The DFE ‐ Gold modules can be installed in a Matrix E7, Matrix N1, Matrix N3 , Matrix N5 , or Matrix N7 chassis. The slot locations in the Ma trix E7, N3, N5, a ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 42
Module Placement and Rules 3-10 Installation Example 1 ( Figure 3-6 , A) Shows one module installed in the chassis. If the chassis is populated with only one 4xxxxx, it must be installed in slot 1. Rule: If only one 4xxxxx is installe ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 43
Installing the DFE Module into a Chassis Matrix DFE-Gold Series Installation Guide 3-11 Inst alling the DFE Module into a Chassis To install a DFE ‐ Gold module int o a chassis, proceed directly to “ Preparation ” on page 3 ‐ 11 to start the installa tion process. Prep ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 44
Installing the DFE Module into a Chassis 3-12 Installation Inst alling Module into Matrix E7 or N7 Chassis To install the module, refer to Figure 3 ‐ 1 and proceed as follows: 1. Locate the chassis card guides tha t line up with the slot number in which ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 45
Installing the DFE Module into a Chassis Matrix DFE-Gold Series Installation Guide 3-13 Figure 3-1 Inst alling Module into M atrix E7 or Mat rix N7 Chassis (E7 shown) 1 Card guides 5 Upper/lower locking tabs (in proper open position) 2 Slot number 1 (Left-most slot is 1.) 6 Upper/lower lockin g tab (in closed positio n) 3 Module card 7 Backplane co ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 46
Installing the DFE Module into a Chassis 3-14 Installation Inst alling Module into Matr ix N1, N3, or N5 Chassis A DFE ‐ Gold module can be installed in any av ailable chassis slot (1 through 3) in the Matrix N3 chassis or slots 1 through 5 in the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 47
Connecting to the Network Matrix DFE-Gold Series Installation Guide 3-15 Figure 3-7 Installing Module into N1 , N3, or N5 Chassis (only N3 shown) Connecting to the Network This section provides the procedures for connecting unshielded twisted pair (UTP) segments from the network or oth ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 48
Connecting to the Network 3-16 Installation Connecting UTP Cables The fixed RJ4 5 front panel connections of the 4G4202 ‐ 72 and 4G4282 ‐ 49 are 10/100/1000 Mbps ports. These ports hav e internal crossov ers, and also support auto matic ‐ polarity ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 49
Connecting to the Network Matrix DFE-Gold Series Installation Guide 3-17 Figure 3 ‐ 10 for four ‐ wire RJ45 conne ctions. Refer to Figure 3 ‐ 11 and Figure 3 ‐ 12 for eight ‐ wire RJ45 connections. e. Ensure that the twisted pai r connection meets the dB ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 50
Connecting to the Network 3-18 Installation Figure 3-9 Crossover Four-Wire Cabl e RJ45 Pinout s, Connections Between Network Device s Figure 3-10 Four-Wire Str aight-throu gh Cable RJ45 Pinout s, Connections Between Network Devices 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 Other device port 4 RX+/RX- and TX+/TX- connections. These connect ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 51
Connecting to the Network Matrix DFE-Gold Series Installation Guide 3-19 Figure 3-1 1 Eight-Wire Crossover Cable RJ45 Pinout s, Connections Between Network Device s Figure 3-12 Eight-Wire S traight-Through Cable RJ4 5 Pinout s, Connections Between Sw itches and End Syst em Devi ces 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 Other device po ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 52
Connecting to the Network 3-20 Installation Connecting Fiber-Opti c Cables to Mini-GBICs This section provides the procedure for connecting 1 ‐ Gigabit Ethernet fiber ‐ optic segments from the network or other devices to Mini ‐ GBIC MT ‐ RJ or LC port ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 53
Connecting to the Network Matrix DFE-Gold Series Installation Guide 3-21 Figure 3-13 Cable Connection to MT -RJ Fiber- Optic Connectors 1 Installed Mini-GBIC MT -RJ conn ector 4 Receive LED (RX) 2 MT -R J cable connecto r 5 Transmit LED (TX) 3 Release t ab 1 2 3 4 5 6 1 2 3 4 5 6 7G-6MGBIC-A Ä Ã À Á Â ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 54
Connecting to the Network 3-22 Installation Figure 3-14 Cable Connection to LC Fiber-Optic Connec tors 3. Plug the other end of the cable into the appropriate port on the other devi ce. Some cables may be terminated at the other end with two sepa ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 55
Connecting to COM Port for Local Management Matrix DFE-Gold Series Installation Guide 3-23 fiber ‐ optic strand. In this case, ensure that the transmit fibe r ‐ optic strand is connected to the receive port and the receiv e fiber ‐ optic strand to the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 56
Connecting to COM Port for Local Management 3-24 Installation Wi t h a UTP stra ight ‐ through cable and an RJ45 ‐ to ‐ DB25 male adapter , yo u can connect products equipped with an RJ45 COM port to a Hayes compatible modem that supports ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 57
Connecting to COM Port for Local Management Matrix DFE-Gold Series Installation Guide 3-25 Figure 3-15 Connecting an IBM PC or Comp atible Device Connecting to a VT Series T erminal To connect a VT Series terminal to an Enterasys Networks DFE ‐ Gold module COM port ( Figure 3 ‐ 16 ), use ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 58
Connecting to COM Port for Local Management 3-26 Installation When these parameters are se t, the Local Management password screen will disp lay . Refer to the Matrix DFE ‐ Gold Series Configuration Guide for further information. Figure 3-16 Connecting a VT Series ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 59
Connecting to COM Port for Local Management Matrix DFE-Gold Series Installation Guide 3-27 5. W ith a PC connected to a remote modem, you can configure the switch remotely . To accomplish this, you must configure you r PC VT emulation package with ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 60
Connecting to COM Port for Local Management 3-28 Installation Adapter Wiring and Signal Assignment s COM Port Adapter Wiring an d Signal Diagram RJ45 DB9 Pin Conductor Pin Signal 1 Blue 2 Receive (RX) 4 Red 3 T ransmit (TX) 5 Green 5 Ground (GRD) 2 Orange 7 Request to Send (RTS) 6 Y ellow 8 Clear to Send (CTS) VT Series Port Adapter Wi ring and Sig ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 61
Completing the Installation Matrix DFE-Gold Series Installation Guide 3-29 Completing the Inst allation Completion of th e DFE module installation depends upon the type of system in whi ch the module is being installed. •I f installing in a new DFE ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 62
Completing the Installation 3-30 Installation First-T ime Log-In Using a Console Port Connection Start the Command Line Interface (CLI) from the module’ s local console port as follo ws: 1. Connect a terminal to the local console port as described in ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 63
Completing the Installation Matrix DFE-Gold Series Installation Guide 3-31 Figure 3-18 Matrix DFE St artup Screen Example (N7 Chassis) Completing the Inst allation of a DFE-Gold Module in an Existing System In an established DFE module system , •a DFE module is already estab lished as the manage ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 64
Completing the Installation 3-32 Installation Logging in with an Administrati vely-Configured User Account If the device’ s default user account settings have been changed, proceed as follows: 1. At the login prompt, enter you r administratively ‐ assigned user name ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 65
Matrix DFE-Gold Series Installation Guide 4-1 4 T roubleshooting This chapter provides information concerning the following: Unless otherwise noted, the following information applies to all DFE modules. Using LANVIEW The modules use a built ‐ in visual diagnos ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 66
Using LANVIEW 4-2 Troubleshooting Viewing the Receive and T ransmit Activity On the 4G4202 ‐ 72 and 4G4282 ‐ 49, yo u can view the receive and transmit activity on the RX and TX LEDs. How ever , only one group of ports may be viewed a ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 67
Using LANVIEW Matrix DFE-Gold Series Installation Guide 4-3 Ta b l e 4 ‐ 1 describes the LED indications and provides recommended actions as appropriate. The terms flashing , blinking , and solid used in T able 4-1 indica te the followin g: • Flashing indicates an LED is flashing randomly . • Blinking i ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 68
Using LANVIEW 4-4 Troubleshooting Amber and off Alternating (67% on, 33% off) . Indicates that a shutdown process has completed. This indication will remain for 60 seconds before automati cally rest arting. While in this state, you have 60 seconds to safely remove th e DFE-Gold module from the chassis. RX (Receive) None No link . No activity . Port ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 69
Troubleshooting Checklist Matrix DFE-Gold Series Installation Guide 4-5 T roubleshooting Checklist If the module is not wor ki n g properly , refer to Ta b l e 4 ‐ 2 for a checklist of problems, possible causes, and recommended actions to resolve the probl ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 70
DFE-Gold Module Shutdown Procedure 4-6 Troubleshooting DFE-Gold Module Shut down Procedure The DFE ‐ Gold modules installed in a Matrix E7, Matrix N3, Ma trix N5, or Matrix N7 chassis are interdep enden t and operate under a single IP address as a single, ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 71
DFE-Gold Module Shutdown Procedure Matrix DFE-Gold Series Installation Guide 4-7 Yo u can shut down a DFE ‐ Gold module in an operating system using the OFFLINE/RESET switch shown in Fi gure 4 ‐ 2 . There are tw o procedures to shut down a DFE ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 72
DFE-Gold Module Shutdown Procedure 4-8 Troubleshooting When a controlled shutdown is initiated from the OFFLINE/RESET switch , you have 60 seconds from the time the CPU starts alternately flashing amber/off until the device automatically restarts ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 73
Matrix DFE-Gold Series Installation Guide A-1 A Specifications This appendix provides information about the f ollowing: Enterasys Network s res erves the right to change the specifications at any time without notice. DFE-Gold Module S pecifications Ta b l e A ‐ 1 provides ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 74
Ethernet Interface Module Specifications A-2 Specifications Ethernet Interface Module S pecifications Refer to Ta b l e A ‐ 2 for the 7G ‐ 6MGBIC and 7G ‐ 6MGBIC ‐ A specifications. Processors/Memory Processor MPC750CX, 400 MHz processor Dynamic Random Access Memory (DRAM) 128 MB FLASH Memory 32 MB Physic ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 75
Mini-GBIC Input/Output Specifications Matrix DFE-Gold Series Installation Guide A-3 Mini-GBIC Input/Output S pecifications The Mini ‐ Gigabit Ethernet Card (Mini ‐ GBIC) port interface slots can support 1 ‐ Gbps fiber ‐ optic and copper connections as described in Ta b ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 76
Gigabit Ethernet Specifications A-4 Specifications Gigabit Ethernet S pecifications The following specificat ions for the Mini ‐ GBICs shown in Ta b l e A ‐ 4 through Ta b l e A ‐ 12 meet or exceed the IEEE 802.3z ‐ 1998 standard. MGBIC-LC01 / MGBIC-MT01 Sp ecifications (10 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 77
Gigabit Ethernet Specifications Matrix DFE-Gold Series Installation Guide A-5 MGBIC-LC09 S pecific ations (1000 BASE-LX) MGBIC-08 Sp ecifications (1000BASE-ELX) T able A-7 MGBIC-LC03 Operating Ra nge Item Modal Bandwid th @ 1310 nm Range 62.5 µm MMF 160 MHz/km 2,000 Meters 50 µm MMF 400 MHz/km 2,000 Meters T able A-8 MGBIC-LC09 Optical S pecifica ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 78
Gigabit Ethernet Specifications A-6 Specifications MGBIC-02 Sp ecifications (1000BASE-T) Link Power Budget 1 (Full Duplex Only) 23 dB 28 dB, typical 1. The maximum dr ive distance (up to 70 km) depends on the quality of the installed single-mode fiber- optic cable segment . Use the Link Power Budget to calcula te the maximum cable length of the att ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 79
COM Port Pinout Assignments Matrix DFE-Gold Series Installation Guide A-7 COM Port Pinout Assignment s The COM port is a serial communications port for access to Local Management. Refer to Ta b l e A ‐ 13 for the COM port pin assignments. Regulatory Compliance The ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 80
Regulatory Compliance A-8 Specifications ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 81
Matrix DFE-Gold Series Installation Guide B-1 B Mode Switch Bank Settings and Optional Installations This appendix covers the following items: Required T ools Use the following tools to perform the procedures provided in this appendix: •A n t i s t a t i c wrist strap • Phi ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 82
Setting the Mode Switches B-2 Mode Switch Bank Settings and Optional Installations Figure B ‐ 1 through Figure B ‐ 3 show the location of the mode switches and the switch settings for normal operation. These switches are set at the factory to th ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 83
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Installation Guide B-3 Memory Locations and Replacement Procedures In the event that the Dual In ‐ Line Memory Module (DIMM) or DRAM Single In ‐ line Memory Module (SIMM) (FLASH memory) needs to ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 84
Memory Locations and Replacement Procedures B-4 Mode Switch Bank Settings and Optional Installations Figure B-3 Memory Module Locations on the 4G4282-49 DRAM SIMM Replacement Procedure Removing the DRAM SIMM To remove the DRAM SI MM, proceed as follows: 1. If an netw ork expansion module is instal ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 85
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Installation Guide B-5 Figure B-4 NEM Removal and DRAM SIMM Connector Location on 4G4282-49 2. Refer to Figure B ‐ 5 . Push the connector arms aw ay from the DRAM SIMM and simultaneous ly lift the DRAM SIMM en ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 86
Memory Locations and Replacement Procedures B-6 Mode Switch Bank Settings and Optional Installations Inst alling the DRA M SIMM on 4G4282-49 To install a DRAM SIMM, refer to Figure B ‐ 6 and proceed as follows: 1. Insert the DRAM SIMM down between the connector fingers. 2 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 87
Memory Locations and Replacement Procedures Matrix DFE-Gold Series Installation Guide B-7 DIMM Replacement Procedure The DIMM is considered a fi eld replaceable unit on both the 4G4202 ‐ 72 and 4G4282 ‐ 49. Removing the DIMM To remove the existing DIMM, proceed as f ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 88
Memory Locations and Replacement Procedures B-8 Mode Switch Bank Settings and Optional Installations Inst alling the DIMM on 4G4202-72 or 4G4282-49 To install a DIMM, refer to Figure B ‐ 8 and proceed as follows: 1. Push the connector arms aw ay from the DIMM enough to ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 89
Index-1 Index Numerics 1000BASE-SX/LX/ELX network connections requirements for 2-2 1000BASE-T network connections requirements for 2-3 100BASE-TX requirements 2-2 10BASE-T connection 3-16 requirements 2-2 4G4202-72 connectivity 1-6 introduction to 1-3 4G4282-49 connectivity 1-6 introduction to 1-3 C Cable Fiber budget A-3 Cable connections 4G4202-7 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 - page 90
Index-2 Matrix N1 chassis module installation into 3-14 Matrix N3 chassis module installation into 3-12 , 3- 14 Matrix N5 chassis module installation into 3-12 , 3- 14 Matrix N7 chassis module installation into 3-1 1 Memory locations DIMM and SIMM B-3 MGBIC-02 specifications for A-6 MGBIC-08 specifications for A-5 MGBIC-LC01 specifications for A-4 ...
Haben Sie eine Frage bezüglich Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Enterasys Enterasys Gold Distributed Forwarding Engine 4G4282-49 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.