Bedienungsanleitung Star Trac NAV REPEATER

15 Seiten 0.13 mb
Download

Zur Seite of 15

Summary
  • Star Trac NAV REPEATER - page 1

    OPERATION MANUAL ...

  • Star Trac NAV REPEATER - page 2

    1 Introduction ........................................................................................................ 2 1.1 Part specification .............................................................................................. 2 2 Installation ............................................................................................. ...

  • Star Trac NAV REPEATER - page 3

    1 Introduction Thank you for choosing the Star NAV Repeater which will display all necessary data from your NMEA navigator. Power and NMEA data are connected on the reverse side of the instrument. The colour coded 4-pole jack plug makes the installation easy. 1.1 Part specification Star SEA Data is delivered with all mounting material. Make sure al ...

  • Star Trac NAV REPEATER - page 4

    2 Installation • The installation includes 6 major steps: 1. Read the installation and operation manual. 2. Plan where to install the transducer and instrument. 3. Install the transducer, then the instrument. 4. Run the cables. 5. Take a break and admire your installation. 6. Learn the functions and calibrate your instrument. • Before you begin ...

  • Star Trac NAV REPEATER - page 5

    2.1 Installing the instrument • Place the adhesive drill template on the desired location for the instrument. Drill the four screw holes using a 2 .8 mm ( 7 / 64 ”) drill for wood or 3.2 mm ( 1 / 8 ”) for fibre glass. Use a 52 mm (2 1 / 16 ”) hole saw to machine the clearance hole for the instrument connection socket. Note! Never drill thro ...

  • Star Trac NAV REPEATER - page 6

    3 Function overview The display is divided in two function groups: Position and Navigation. To change between them, press MODE . To scroll in function list, press UP or DOWN . 3.1 How to use the push buttons Mode / Light button This button is used to change between Position mode and Navigation mode. One short press changes between the two modes. To ...

  • Star Trac NAV REPEATER - page 7

    3.2 Position The position is displayed in latitude and longitude to three decimal places. If the NMEA Navigator just sends two decimals, the third will always read zero. 3.2.1 Time and date To display date and time, press DOWN . Date and time is displayed in month, day, hour, minute and second. Some NMEA navigators does not send date. In that case, ...

  • Star Trac NAV REPEATER - page 8

    3.3 Navigation functions To change to combi steer, press MODE . The combi steer window provides you with information of five values at a time. The arrow at the top helps you to keep on track. This function is explained in section 3.3.7. The functions displayed are speed over ground, course over ground, distance to Waypoint and course to Waypoint. I ...

  • Star Trac NAV REPEATER - page 9

    3.3.4 Select Waypoint In the navigation mode you can at any time set a Waypoint to go to. The NAV Repeater will then compute the distance and bearing to Waypoint and all other functions .The W aypoint is selected by pressing the KEY in any navigation mode. When the KEY is pressed the NMEA W aypoint number is displayed. To enter your Waypoint, press ...

  • Star Trac NAV REPEATER - page 10

    3.3.7 Top arrows At the top of the display there are four arrows and four text signs. The arrows tell you if you are on the ”road” or not and the text displays the status of your NMEA navigator . The width of the road can be adjusted, see calibration section 5.9. If you select the road to be 0.050 Nm wide, the arrow will jump to the rightmost p ...

  • Star Trac NAV REPEATER - page 11

    The following NMEA sentences are red for displaying different data. The sentences are in priority order (i.e. if the NMEA navigater is sending more than one sentence, the information in the first sentence is displayed.) Position: 1. GGA, 2. RMC, 3. RMA, 4.GLL Date and time: 1. ZDA, 2.RMC, 3.GGA, 4.GLL, 5. BWC, 6.BWR Speed Over Ground: 1. RMC , 2. R ...

  • Star Trac NAV REPEATER - page 12

    5.2 Unit for distance The unit for distance can be selected as nautical miles (NM), kilometres (KM) or miles (MI). 5.3 Unit for speed The unit for speed can be selected as knots (KTS), kilometres/hour (KMH) or miles/hour (MPH). 5.4 Seconds ON/OFF Select the position to be displayed in seconds or hundreths of minutes. If seconds is set to OFF, hundr ...

  • Star Trac NAV REPEATER - page 13

    5.7 Circle alarm The Star NAV Repeater has a built in arrival alarm. When the boat is closer to the Waypoint than the setting in this calibration mode, the alarm is activated. You can select the radius of the circle. To turn off the alarm, set the value to zero. Note! Circle alarm limit is always in nautical miles. 5.8 Cross track error alarm The S ...

  • Star Trac NAV REPEATER - page 14

    6 Fault finding The instrument has three fault messages. No INPUT, NO DATA and UNKNOWN dATA. Screen Cause Action Blank No power supply 1. Check fuse. 2. Check connections. No input No signals are registrated by the NAV Repeater 1. Check connections 2. Check if your NMEA navigator is sending data. No data Signals are recived but non recognisable by ...

  • Star Trac NAV REPEATER - page 15

    LIMITED WARRANTY The warranty covers repair of defective parts, due to faulty manufacture and includes labour when repaired in the country of purchase. The warranty period is two years, and commences from the date of purchase. The above warranty is the Manufacturers only warranty and no other terms, expressed or implied, will apply. The Manufacture ...

Produzent Star Trac Kategorie GPS Receiver

Dokumente, die wir vom Produzenten des Geräts Star Trac NAV REPEATER erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Star Trac
- Bedienungsanleitungen NAV REPEATER
- Produktkarten Star Trac
- Informationsbroschüren
- oder Energieetiketten Star Trac NAV REPEATER
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Star Trac NAV REPEATER.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Star Trac NAV REPEATER, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Star Trac NAV REPEATER. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Star Trac NAV REPEATER ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Star Trac NAV REPEATER, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Star Trac NAV REPEATER hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Star Trac NAV REPEATER verständlich ist.

Eine gänzliche Bedienungsanleitung von Star Trac sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Star Trac NAV REPEATER bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Star Trac NAV REPEATER befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Star Trac NAV REPEATER, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Star Trac NAV REPEATER - die uns die ersten Schritte während der Nutzung von Star Trac NAV REPEATER erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Star Trac NAV REPEATER hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Star Trac NAV REPEATER im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Star Trac NAV REPEATER?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Star Trac NAV REPEATER nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Star Trac NAV REPEATER hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)