-
Bush 478/4810 - page 1
BUSH – Integrated Dishwasher Installation & User Instructions – Please keep for future reference 478 / 4810 These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance. If you need help or have damaged or missing parts, call the Customer ...
-
Bush 478/4810 - page 2
Contents Safety Information 2 Parts 3 Installation 4-9 Aesthetic panel installation 4-6 Water supply connection 7 Drain hose connection 7 Position the appliance 7 Water pressure 8 Electrical connection 9 User Instructions 10-17 Before first use 10-12 Loading your dishwasher 13-15 Wash cycle table 16 Using your appliance 17 Care and Maintenance 18 G ...
-
Bush 478/4810 - page 3
Safet y Information Im p ortant – Please read these instructions full y before installation Before use Durin g use The installation of this appliance is best carried out by 2 people. y Dispose of all packaging carefully an d responsibly. y The appliance is designed for indoor use only and must be protected from rain, moisture and extreme temperat ...
-
Bush 478/4810 - page 4
Part Please familiarize yourself with the parts and accessories listed below 1. Upper basket 2. Spray arms 3. Lower basket 4. Salt container 5. Main filter 6. Detergent dispenser 7. Cup shelf 8. Cutlery basket 9. Coarse basket 10. Rinse aid dispenser 11. Drain pipe connector 12. Inlet pipe connector If you have damaged or missing pa rts, call the C ...
-
Bush 478/4810 - page 5
Installation Aesthetic p anel installation Cabinet dimensions Note: Less than 5mm between the top of dishwasher and cabinet and the outer door aligned to cabinet. 50mm minimum space when door is opened. The aesthetic panel should be processed in accordance with the illustrated dimensions (unit: mm) 4 Cabinet Dishwas her Door of dishwa sher Min im u ...
-
Bush 478/4810 - page 6
Installation Aesthetic p anel installation 1. Install the hook on the aesthetic wooden panel and put the hook into the slot of the outer door of dishwasher. 2. After positioning of the panel, fix the panel onto the outer door by screws and bolts. a. Take away the cover b. Pin up the screw c. Get back the cover 5 ...
-
Bush 478/4810 - page 7
Installation Aesthetic p anel installation 1. Install the furniture door to the outer door of the dishwasher using the br ackets provided. Refer to the template for positioning of the brackets. 2. Adjust the tension of the door springs by using an Allen key turning in a clockwise direction to tighten the left and right door springs (Illustration 2) ...
-
Bush 478/4810 - page 8
Installation Water su pp l y connection Caution: 2 people are required to unpack and handle the appliance, it is recommended that gloves are worn. y Carefully remove all packaging materials including the foam base, dispose of correctly. y Connect the cold water supply hose to a threaded ¾” connector and make sure that it is fastened tightly in p ...
-
Bush 478/4810 - page 9
Installation Water p ressure For best operating results, incoming water pressure should be between 0.04 and 1 Mpa. Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure) against the soiled surface of dishes . The water is pumped through a rotating spray arm, drained through a filter removing food and soiled p ...
-
Bush 478/4810 - page 10
Installation Electrical connection Any electrical work that is required to install this appliance MUST be carried out by a qualified electrician. Warning: THIS APPLIANCE MUST BE EARTHED Before making any electrical connections, ensure that: y Electrical safety is only guaranteed when the earth system of your house is in accordance with the related ...
-
Bush 478/4810 - page 11
User Instructions Before first use Before using your appliance for the first time: y Set the water softener y Pour ½ litre of water inside the salt container and then fill with dishwasher salt y Fill the rinse aid dispenser y Fill in detergent Water Softener The dishwasher is designed with a softener to eliminate the minerals and lime from the wat ...
-
Bush 478/4810 - page 12
User Instructions Before first use Rinsing Aid A rinsing aid is specially formulated to rinse away food and detergent residues that can be left behind on your dishes. Use regularly, a rinse aid will automatically provide you with cleaner dishes every time you wash. Loading the rinsing aid 1. Turn the dispenser cap to ‘open’ arrow and lift it ou ...
-
Bush 478/4810 - page 13
User Instructions Before first use Detergent Use only detergent specifically made for use in dishwashers, as other types may damage the dishwasher. The dispenser must be filled before the start of each wash cycle following the instructions provided in the wash cycle table. Your dishwasher uses less detergent and rinse aid than conventional dishwash ...
-
Bush 478/4810 - page 14
User Instructions 13 Preparing your dishes prior washing y Scrape off all food residuals from the dishes. y Remove exc essive quantities of oil o r grease. y Empty any liquids from glasses and cups. y Dishes with dried-on foods are more difficult to wash and may not come clean in a normal wash cycle. y Arrange all items with recessed or curved sect ...
-
Bush 478/4810 - page 15
Loading your dishwasher User Instructions Loading the lower basket y Put large items which are most difficult to clean into the lower basket. y Locate sharp items so that they are not likely to damage the door seal. y Load sharp knives with the handles up to reduce the risk of injuries. y Do not load plastic items unless they are marked "dishw ...
-
Bush 478/4810 - page 16
User Instructions Loading your dishwasher NOTE: For ease of loading/unloading large size dinner plates from the dish rack it may be necessary to remove the cutlery basket. When loading/unloading is complete, return the cutlery basket to its original position. Warning y Do not touch the heating element during or immediately after use. y Do not tampe ...
-
Bush 478/4810 - page 17
User Instructions Wash cycle table Program Cycle selection information Description of cycle Detergent pre/main Run time (min) Energy (Kwh) Water (L) Rinse Aid Strong Pre-wash Pre-wash(50 ) ℃ Wash (60 ) ℃ Rinse Rinse (70 ) ℃ Drying 5/25g 160 1.4 16 Normal (IEC-EN 50242) Pre-wash Pre-wash Wash (50 ) ℃ Rinse Rinse (70 ) ℃ Drying 5/25g 15 ...
-
Bush 478/4810 - page 18
User Instructions Using your appliance To operate the dishwasher: 1. Make sure the water inlet and drain hoses are correctly and securely connected. 2. Push the door release button to open the door. 3. Fill the detergent, water softener and rinsing aid to the dishw asher. 4. Draw out the lower and upper basket. Load the dishes on the dish rack and ...
-
Bush 478/4810 - page 19
Care and Maintenance General Important: Always unplug the appliance from the power socket during cleaning and maintenance. y Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for cleaning. y Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it m ...
-
Bush 478/4810 - page 20
Trouble Shooting 19 Warning: - If overflow occurs, turn off the water supply before contacting the customer helpline. - If there is water in the base pan because of overfill or small leak, the w ater should be removed before restarting the dishwasher. Error codes Description Possible causes E1 Longer inlet time. Faucets is not opened, or water inta ...
-
Bush 478/4810 - page 21
20 W 59 5 X D 540 X H8 20m m A 320 kW h 1. 1 3 kW h 0W/1 . W 4620 lit re 155 min 176 0-2 1 0 0 W En erg y eff iciency c lass A nn u al ener gy c o nsu mpt io n En erg y con sum ption of the s t and ard clea ning cycl e Po wer con sumption of o f f-m ode / left -on mode An nu a l w a te r c o ns u mpt i on Dr ying e fficienc y cl ass St an d ard c l ...
-
Bush 478/4810 - page 22
Disposal information The symbol on the product or its packaging indicates that this product m ay not be treated as household waste. Instead it should be handed ov er to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negat iv ...
-
Bush 478/4810 - page 23
Guarantee PRODUCT GUARANTEE This product is guaranteed against manufacturing defects f or a period of Year This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possi ble during this period by t ...
Haben Sie eine Frage bezüglich Bush 478/4810?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Bush 478/4810 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Bush 478/4810 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.