Bedienungsanleitung Billion BiPAC 7001

61 Seiten 0.29 mb
Download

Zur Seite of 61

Summary
  • Billion BiPAC 7001 - page 1

    BiP AC 7001 ADSL USB Modem User ’ s Manual ...

  • Billion BiPAC 7001 - page 2

    Chapter 1 ................................................................................................ 1 1.1 Introducing the BiP AC 7001 ................................................... 1 1.2 Features of the BiP AC 7001 .................................................. 1 1.3 Installing Billion ADSL USB Modem ................................ ...

  • Billion BiPAC 7001 - page 3

    Chapter 1 Introduction the BiPAC 7001 1.1 Introducing the BiP AC 7001 Billion’s BiP AC 7001 complies with ADSL standards and supports downstream rate of up to 8Mbps. With it s user-friendly installation utility and plug-and-play USB interface, it can be easily installed on a desktop PC or notebook PC without opening the case of the computer or ad ...

  • Billion BiPAC 7001 - page 4

    1.3 Inst alling Billion ADSL USB Modem 2 ...

  • Billion BiPAC 7001 - page 5

    Chapter 2 Installing the BiPAC 7001 2.1 Import ant note for using the BiP AC 7001  Do not use the BiP AC 7001 in high humidity or high temperatures.  Avoid using this product and all accessories out doors.  Place the BiP AC 7001 on a stable surface. 13 . Place the A ttention 2.2 Package Content s BiP AC 7001 ADSL USB Modem One installation ...

  • Billion BiPAC 7001 - page 6

    2.3 The Front LEDs 2.4 The Rear Port s Port Meaning 1 USB Connect the supplied USB cable to this port when connecting to the PC 2 LINE Connect the supplied RJ-1 1 (“telephone”) cable to this port when connecting to the ADSL/telephone network. LED Meaning 1 ADSL : Lit when successfully connected to an ADSL DSLAM (“linesync”) 2 DATA: When thi ...

  • Billion BiPAC 7001 - page 7

    2.5 Cabling Through USB Port The product can be used as a Network Adapter on your PC. That means you do not have to install a network adapter first on your PC before connecting the ADSL Modem/Router . Just connect the supplied USB cable to the USB por t of the ADSL USB Modem and connect the other end to the PC. Make sure that your ADSL USB Modem an ...

  • Billion BiPAC 7001 - page 8

    Chapter 3 Basic Installation 3.1 Inst alling the USB Driver on PC 3.1.1 For Windows 1. Insert the CD into your computer’s CD Rom drive. This is the hi-speed modem installation CD, Click “setup. exe” to continue.”. 1. Simply follow the instructions below which outline what you need to do. This section is described based on Windows XP/ 2000/M ...

  • Billion BiPAC 7001 - page 9

    2. Choose service provider from the lis t below and then click “Next” to continue. 3. Then click “Next”. 4. Please plug USB cable into ADSL USB Modem. 7 ...

  • Billion BiPAC 7001 - page 10

    5. Select “Yes, reboot the comput er now”, than close the windows. 6. After restart the PC, wi ndow will show congratulation message and user can enjoying Internet. 8 ...

  • Billion BiPAC 7001 - page 11

    7. After Billion ADSL USB Modem driver is successfully installed, you will se e these 2 icons on your desktop. 9 ...

  • Billion BiPAC 7001 - page 12

    3.1.2 For MAC OS 9/X : 1. S t art Windows. Then insert the installation CD into the CD-ROM drive. In next window , click the driver installer . 2. The “Welcome” screen will appear , then, click “Next”. 10 ...

  • Billion BiPAC 7001 - page 13

    3. Input the user name and pa ssword of your Mac system. 4. The “License Agreement” scr een will appear , then click “Accept”. 5. T o click the type of setup you prefer , then click Next >. 11 ...

  • Billion BiPAC 7001 - page 14

    6. When all necessary files have been copied, select “Restart now”, than close the windows. 12 ...

  • Billion BiPAC 7001 - page 15

    3.1.3 For Linux: For Linux installation instru ctions, please refer to the text file provided with your Linux driver ’s p ackage. This driver supports Linux-2.4 kernels. T he Linux kernel sources can be download from: http://www .kernel.org/pub/linux/kernel/v2.4/ The driver supports Linux-2.4 kernels. The installed system should already have the ...

  • Billion BiPAC 7001 - page 16

    3.2 Configuring the Network Properties--- LAN Adapter 3.2.1 Configuring PC in Windows XP 1. Go to St art / Control Panel (in Classic V iew ) . In the Control Panel, double-click on Network Connections, and Double-click Local Area Connection . 2. In the Local Area Connection St atus window , click Properties . 3. Select Internet Protocol (TCP/IP) an ...

  • Billion BiPAC 7001 - page 17

    4. Use the “Internet Protocol (TCP/IP) Proper ties” window to modify the IP address and DNS Server address as follow . 15 ...

  • Billion BiPAC 7001 - page 18

    Change the IP address to a user defined address by selecting Use the following IP address and typing the address in the space provided. Change the DNS Server address to user defined addresses by selecting Use the following DNS server address and typing t he addresses in the spaces provided. The “Advanced” button of the “Internet Pr otocol (TC ...

  • Billion BiPAC 7001 - page 19

    3.2.2 Configuring PC in Windows 2000 1. Go to St art / Control Panel (in Classic V iew ) . In the Control Panel, double-click on Network Connections and Double-click Local Area Connection . 2. In the Local Area Connection St atus window click Properties . 17 ...

  • Billion BiPAC 7001 - page 20

    3. Select Internet Protocol (TCP/IP) and click Properties 4. Use the “Internet Protocol (TCP/IP) Properti es” window to modify the IP address and DNS Server address as follow . Change the IP address to a user defined address by selecting Use the following IP 18 ...

  • Billion BiPAC 7001 - page 21

    address and typing the address in the space provided. Change the DNS Server address to user defined addresses by selecting Use the following DNS server address and typing the addresses in the spaces provided. The “Advanced” button of the “Internet Protocol (TCP/IP) Properties” window may be used to alter DNS addresses, WINS addresses and IP ...

  • Billion BiPAC 7001 - page 22

    3.2.3 Configuring PC in Windows Me 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Comp atible , or the name of your Network Interface Card (NIC) in your PC. 3. Select the IP Address tab. In this window , select either the Obtain an IP address ...

  • Billion BiPAC 7001 - page 23

    4. The “Gateway” tab allows you to add or remove gateway . Consult with your network administrator to determine the appropriate addresses for your individual needs. T o add a new gateway , type the address in the New gateway field and click Add . The new gateway will appear in the installed gateways list. T o remove a previously inst alled gate ...

  • Billion BiPAC 7001 - page 24

    3.2.4 Configuring PC in Windows 98 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Comp atible , or the name of your Network Interface Card (NIC) in your PC. 3. Select the IP Address tab. In this window , select either the Obtain an IP address ...

  • Billion BiPAC 7001 - page 25

    4. The “Gateway” tab allows you to add or remove gateway . Consult with your network administrator to determine the appropriate addresses for your individual needs. T o add a new gateway , type the address in the New gateway field and click Add . The new gateway will appear in the installed gateways list. T o remove a previously installed gatew ...

  • Billion BiPAC 7001 - page 26

    3.2.5 Configuring PC in Linux: T o enable LAN traffic over the ethernet interface: % ifconfig eth2 192.168.1.200 up Y ou may also need to modify the netmask and rout e for the interface. Refer to the manual pages for ifconfig and route for more information. T o test the LAN connection is alive by pinging the remote side: % ping 192.168.1.1 T o disc ...

  • Billion BiPAC 7001 - page 27

    3.3 Configuring the Network Properties--- W AN Adapter 3.3.1 Configuring PC in Windows XP 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. From the Network and Dial-up Connections window , right–click the Billion Dial-up PPP connection icon and then click Properties . 3. The G ...

  • Billion BiPAC 7001 - page 28

    4. From the Networking tab of the USB ADSL Properties window , select Internet Protocol (TCP/IP) and click Properties 26 ...

  • Billion BiPAC 7001 - page 29

    5. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window , select either the Obtain an IP address automatically or Use the following IP address radio button depending on your network setup. If you select Use the following IP address , type the “IP address” in the space provi ...

  • Billion BiPAC 7001 - page 30

    6. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear . Enter the “User name” and “Password” provided by your ISP . 28 ...

  • Billion BiPAC 7001 - page 31

    3.3.2 Configuring PC in Windows 2000 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. From the Network and Dial-up Connections window , right–click the Billion Dial-up PPP connection icon and then click Properties . 3. The General tab of the windows allows you to specify a dif ...

  • Billion BiPAC 7001 - page 32

    4. From the Networking tab of the USB ADSL Properties window , select Internet Protocol (TCP/IP) and click Properties 5. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window , select either the Obtain an IP address automatically or Use the following IP address radio button depe ...

  • Billion BiPAC 7001 - page 33

    6. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear . Enter the “User name” and “Password” provided by your ISP . 31 ...

  • Billion BiPAC 7001 - page 34

    3.3.3 Configuring PC in Windows Me 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. From the Network and Dial-up Connections window , right–click the Billion Dial-up PPP connection icon and then click Properties . 3. From the Server T ypes tab of the ADSL Easy Dialup window , ...

  • Billion BiPAC 7001 - page 35

    4. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window , select either the Obtain an IP address automatically or Use the following IP address radio button depending on your network setup. If you select Use the following IP address , type the “IP address” in the space provi ...

  • Billion BiPAC 7001 - page 36

    5. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear . Enter the “User name” and “Password” provided by your ISP . 34 ...

  • Billion BiPAC 7001 - page 37

    3.3.4 Configuring PC in Windows 98 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. From the Network and Dial-up Connections window , right–click the Billion Dial-up PPP connection icon and then click Properties . 3. From the Server T ypes tab of the ADSL Easy Dialup window , ...

  • Billion BiPAC 7001 - page 38

    4. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window , select either the Obtain an IP address automatically or Use the following IP address radio button depending on your network setup. If you select Use the following IP address , type the “IP address” in the space provi ...

  • Billion BiPAC 7001 - page 39

    5. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear . Enter the “User name” and “Password” provided by your ISP . 37 ...

  • Billion BiPAC 7001 - page 40

    3.3.5 Configuring PC in Linux: The PPP daemon (pppd) t alks to t he driver over TTY devices. Be fore the driver can be used, the devices /dev/ttyG0 and /dev/cug0 need to be reated. This can be performed by executing: % make devnodes 38 ...

  • Billion BiPAC 7001 - page 41

    3.4 Information from your ISP Before configuring this device, you have to c heck with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA. Gather the information as illustrated in t he following table and keep it for reference. PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Passwor ...

  • Billion BiPAC 7001 - page 42

    Chapter 4 Configuration 4.1 Accessing communication settings Once the Billion BiP AC 7001 ADSL USB Modem and software have been installed, the communication settings may be easily updated by performing the following steps: 1. From your PC desktop, click Sta rt → Programs → BiP AC-7001 ADSL USB Modem → Configure 2. The “Communication Setting ...

  • Billion BiPAC 7001 - page 43

    Make the necessary changes to the VPI/VCI, Encap sulation type and/or Modulation type and click Next > 3. The system has rebooted to have the new se tting take ef fect, therefore, the “Reboot” window will appear , select “Y es, reboot the computer now”, and click “ close ” to reboot. Access to the USB modem’s communication setting ...

  • Billion BiPAC 7001 - page 44

    4.2 Windows DSL St atus Application The Billion ADSL USB Modem control panel program provides a quick and easy way to configure and check the performance of the modem and the ADSL connection. When open, the monitor window updates every 2 seconds. T o access the DSL S tatus Applicat ion, the device driver must be running. Also, make sure the USB cab ...

  • Billion BiPAC 7001 - page 45

    screen displays the release numbe r of the ADSL USB Modem driver , and the DSL S tatus Application version you are currently using. (T o show DSL dat a include Package version , Driver version , Control Panel version and Firmware version ) 43 ...

  • Billion BiPAC 7001 - page 46

    4.3 MAC OS 9.x Control Panel Application 4.3.1 Control Panel : The Billion ADSL USB Modem control panel program provides a quick and easy way to configure and check the performance of the modem and the ADSL connection. When open, the monitor window updates every 2 seconds. T o access the Control Panel, the device driver must be installed. 1. T o ...

  • Billion BiPAC 7001 - page 47

    4.3.2 Development Mode Development Mode is intended for OEM only . When in this mode, the Control Panel display Modem configuration information and advanced statistics about the modem. 1. In order to transition to the Development Mode of the Cont rol Panel, while in the Control Panel, press the “ Ctrl +1 ” key simultaneously . 2. The “DSL S t ...

  • Billion BiPAC 7001 - page 48

    Click Retrain or Disconnect a connection for testing purposes. 3. The “System info” tab provides general information about the various sof tware/firmware version using the same screen as the genera lly available Control panel previously described. 4. Click on the “Configuration” tab to view and modify the Modulation type, VPI and VCI values ...

  • Billion BiPAC 7001 - page 49

    sent and received, and errors. 6. Click on the “DSL Advanced” tab to view more advanced st atistics. Local/Remote Attenuation: The extent of the local/re mote attenuation expressed in decibels (dB) Local SNR Margin: The signal to noise ratio margin . A positive number roughly indicat es the number of dB that the noise could increase before the ...

  • Billion BiPAC 7001 - page 50

    the interleaved data stream. FEC-Fast: Count of local and remote FEC (Forward Error Correction) errors for the fast data stream. CRC-Interleaved: Count of local and remote CRC (Cyclic redundancy check) errors for the interleaved data stream. CRC-Fast: Count of local and remote CRC (Cyclic redundancy check) errors for the fast data stream. 48 ...

  • Billion BiPAC 7001 - page 51

    4.4 MAC OS X Control Panel Application. 4.4.1 Control Panel 1. Access the modem Control Panel on your Macintosh (Go  Applications  DSL MODEM  ADSL USB MODEM) 2. The “ADSL USB Modem” window will appear , with two informational tabs: a) The “DSL S tatus” t ab provides status information for the DSL line, such as the upstream/downstre ...

  • Billion BiPAC 7001 - page 52

    4.4.2 Development Mode Development Mode is intended for OEM only . When in this mode, the Control Panel display Modem configuration information and advanced statistics about the modem. 1. In order to transition to the Development Mode of the Cont rol Panel, while in the Control Panel, press the “ Ctrl +1 ” key simultaneously 2. The “DSL S tat ...

  • Billion BiPAC 7001 - page 53

    Click Retrain or Disconnect a connection for testing purposes. 3. The “System info” tab provides general information about the various sof tware/firmware version using the same screen as the genera lly available Control panel previously described. 4. Click on the “Configuration” tab to view and modify the Modulation type, VPI and VCI values ...

  • Billion BiPAC 7001 - page 54

    5. The “A TM” tab provides transmission statistics such as the number of cells or p ackets sent and received, and errors. 6. Click on the “DSL Advanced” tab to view more advanced st atistics. 52 ...

  • Billion BiPAC 7001 - page 55

    Local/Remote Attenuation: The extent of the local/re mote attenuation expressed in decibels (dB) Local SNR Margin: The signal to noise ratio margin . A positive number roughly indicat es the number of dB that the noise could increase before the modem produces errors. FEC-Interleaved: Count of local and remote FEC (For ward Error Correction) errors ...

  • Billion BiPAC 7001 - page 56

    Chapter 5 Uninstall Remove the BiP AC 7001 ADSL USB Modem software drivers by performing the following steps. 1. The USB cable should not be unplugged until you are prompted to do so. 2. The USB cable must be unplugged before the system is rebooted. 5.1 Uninst all Windows: 1. From your PC desktop click St art -> Programs -> BiP AC 7001 ADSL U ...

  • Billion BiPAC 7001 - page 57

    3. Y ou will be reminded into to unplug the USB cable until the uninstall process has been completed. Then click OK > 4. A message will be displayed indicating the sof tware is being removed. 5. Unplug the USB cable from the PC and click OK > 6. The “Reboot” window will appear . Remove all disks from the drives, select “Y es, reboot the ...

  • Billion BiPAC 7001 - page 58

    56 ...

  • Billion BiPAC 7001 - page 59

    5.2 Uninst all MAC OS: 1. Invoke the Uninstaller from the DSL M odem folder (Application -> BiP AC 7001 ADSL USB Modem ->Uninstall) 2. The “Uninstall” screen will appear . Select “Y es, remove the software from my computer” and click Next > 3. T ype the administrator name and p asswor d at the “Authenticate” screen and click OK ...

  • Billion BiPAC 7001 - page 60

    58 ...

  • Billion BiPAC 7001 - page 61

    5.3 Uninst all Linux: T o unload an unused module: % rmmod ./GSPNModem (Command to be executed from directory monaco_linux/ModemDrv) Y ou may need to exit or disconnect any progr am current using t he module before it will unload. If the module was configured for LA N, shutdown the ethernet interface: % ifconfig eth2 down Note: If multiple ethernet ...

Produzent Billion Kategorie Network Router

Dokumente, die wir vom Produzenten des Geräts Billion BiPAC 7001 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Billion
- Bedienungsanleitungen BiPAC 7001
- Produktkarten Billion
- Informationsbroschüren
- oder Energieetiketten Billion BiPAC 7001
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Billion BiPAC 7001.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Billion BiPAC 7001, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Billion BiPAC 7001. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Billion BiPAC 7001 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Billion BiPAC 7001, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Billion BiPAC 7001 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Billion BiPAC 7001 verständlich ist.

Eine gänzliche Bedienungsanleitung von Billion sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Billion BiPAC 7001 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Billion BiPAC 7001 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Billion BiPAC 7001, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Billion BiPAC 7001 - die uns die ersten Schritte während der Nutzung von Billion BiPAC 7001 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Billion BiPAC 7001 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Billion BiPAC 7001 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Billion BiPAC 7001?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Billion BiPAC 7001 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Billion BiPAC 7001 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)