Deutsch dropdown-ico

Bedienungsanleitung Quatech DSC-100

34 Seiten 0.41 mb
Download

Zur Seite of 34

Summary
  • Quatech DSC-100 - page 1

    DS C -100 Two Channel RS- 232 Asynchronous Communications Adapte r for PCI bus User's Manual QUATECH, INC. TEL: (330) 434-3154 662 Wolf Ledges Parkway FAX: (330) 434-1409 Akron, Ohio 44311 http://www.quatech.com ...

  • Quatech DSC-100 - page 2

    WARRANTY INFORMATION Quatech, Inc. warrants the DS C -100 to be free of defects for five (5) years from the date of purchase. Quatech, Inc. will repair or replace any board that fails to perform under normal operating conditions and in accordance with the procedures outlined in this document during the warranty period. Any damage that results from ...

  • Quatech DSC-100 - page 3

    (c) 1998 - 2001 , Quatech, Inc. NOTICE The information contained in this document cannot be reproduced in any form without the written consent of Quatech, Inc. Likewise, any software programs that might accompany this document can be used only in accordance with any license agreement(s) between the purchaser and Quatech, Inc. Quatech Inc. reserves ...

  • Quatech DSC-100 - page 4

    Declaration of Conformity Manufacturer's Name: Quatech Inc. M anufacturer's Address: 662 Wolf Ledges Parkway Akron, Ohio 44311 (USA) Application of Council Directive: 89/336/EEC Standards to which Conformity is Declared: * EN50081-1 (EN55022, EN60 555-2 , EN6055 5 -3 ) * EN50082-1 (IEC 801-2, IEC 801-3, & IEC 801-4) Type of Equipment: ...

  • Quatech DSC-100 - page 5

    31 11 Troubleshooting ........................................... 29 10 Specifications ............................................. 28 9 PCI Resource Map .......................................... 26 8 External Connections ..................................... 25 7 OS/2 ............................................................ 22 6.1.1 QTPCI.EX ...

  • Quatech DSC-100 - page 6

    1 General Information The Quatech, Inc. DSC-100 provides two RS- 232 asynchronous serial communication interfaces for IBM-compatible personal computer systems using the PCI expansion bus . The DSC-100 uses Quatech's new Enhanced Serial Adapter design. Legacy serial port data rates are limited to a maximum of 115,200 bits per second. Quatech En ...

  • Quatech DSC-100 - page 7

    1 . 1 Features T he standard DSC-100 implements each of its communication channels with a 16750 UART and uses standard line driver and receiver components. For improved performance and indust rial -grade reliability, Quatech offers the fo llowing board upgrades: 1 . 1 . 1 " IND " Option --- Surge Suppression Upgrade The " IND " ...

  • Quatech DSC-100 - page 8

    2 Hardware Configuration The DSC-100 is automatically configured at boot time by the computer's BIOS or operating system. There are no required switches or jumpers to set for installation. This chapter lists a number of optional jumper settings that control various hardware features. Jumpers J5-J8 are grouped together at the end of the board o ...

  • Quatech DSC-100 - page 9

    2 . 3 Force High-Speed UART Clock (X2, X4, or X8, J 5 -J 7 ) These jumpers force an increase of the UART input clock frequency by a factor of two, four, or eight. This can allow legacy software to use baud rates above 115,200 bits per second. It is also useful if the serial port device driver does not directly support setting the higher baud rates ...

  • Quatech DSC-100 - page 10

    2 . 4 DTE/DCE Selection To simplify connections to other devices, each port on the DSC-100 is equipped with a jumper block that allows the port to be configured as either a DTE- or DCE-type device. This allows the DSC-100 to connect to either DTE- or DCE-type devices without using a null modem cable. The DTE/DCE selection jumper blocks are illustra ...

  • Quatech DSC-100 - page 11

    3 Hardware Installation 1. Turn off the power of the computer system in which the DSC-100 is to be installed. 2. Remove the system cover according to the instructions provided by the computer manufacturer. 3. Make any desired optional jumper setting changes. 4. Install the DSC-100 in any empty PCI expansion slot. The board should be secured by inst ...

  • Quatech DSC-100 - page 12

    4 Address Map and Special Registers This chapter explains how the two UARTs and special registers are addressed, as well as the layout of those registers. This material will be of interest to programmers writing driver software for the DSC-100. 4 . 1 Base Address and Interrupt Level (IRQ ) The base address and IRQ used by the DSC-100 are determined ...

  • Quatech DSC-100 - page 13

    4 . 2 Enabling the Special Registers The DSC-100 contains two unique registers, an Interrupt Status Register and an Options Register. These registers are enabled when the SPAD jumper (J 8 ) is removed (factory default). They replace the UART Scratchpad Register on accesses to register address 7. The Interrupt Status Register and Options Register ar ...

  • Quatech DSC-100 - page 14

    4 . 4 Options Register The Options Register allows software to identify the DSC-100 as a Quatech Enhanced Serial Adapter. It also allows software to set the UART clock rate multiplier. Figure 10 shows the structure of the Options Register. The powerup default of the Options Register is all bits zero. Clock rate multiplier bit 0 RR0 0 Clock rate mul ...

  • Quatech DSC-100 - page 15

    4 . 4 . 2 Clock Rate Multiplier A standard RS-232 serial port operates at a clock speed of 1.8432 MHz. In order to achieve higher data rates, Quatech Enhanced Serial Adapters can operate at two times , four times, or even eight times this standard clock speed. This is controlled by the clock rate multiplier bits in the Options Register. Software ca ...

  • Quatech DSC-100 - page 16

    5 Windows Configuration 5 . 1 Windows Mille nnium 1. After inserting the DSC-100 for the first time the "Add New Hardware Wizard" will begin. Select "Search for the best driver for your device.". Check the "Removable media" and "Specify location" box. Click the "Next" button. 2 . Window will locate ...

  • Quatech DSC-100 - page 17

    5 . 2 Windows 2000 1. After inserting a DSC-100 for the first time, the "Add New Hardware Wizard will appear at start up. C lick the "OK" button. 2. The following dialog box insert the Communications Driver CD ( shipped with the device). Click the "OK" button. 3. The following dialog box will display the appropriate INF fil ...

  • Quatech DSC-100 - page 18

    5 . 3 Windows 98 1. After inserting a DSC-100 for the first time, the "Add New Hardware Wizard will appear at start up. C l ick the "Next" button. 2. Select "Search for the best driver for you device". Click the "Next" button. 3. On the next dialog, select the " CD - ROM drive " check box. Insert the Com ...

  • Quatech DSC-100 - page 19

    4. The following dialog box will display the appropriate INF file on the diskette in drive. Click the "Next" button. 5. Window will copy the INF file from the diskette and display a final dialog indic ation that the process is complete. Click the "Finish" button. 5 . 4 Windows 1995 Windows 95 maintains a registry of all known ha ...

  • Quatech DSC-100 - page 20

    1. After booting the computer with a newly-installed DSC-100, the "New Hardware Found" dialog box will appear. If you have never installed a Quatech PCI communications adapter before, the dialog box may simply indicate that it has found a "PCI Card." 2. Select the radio button for "Driver from disk provided by hardware manu ...

  • Quatech DSC-100 - page 21

    5 . 5 Windows NT The Windows NT device driver is installed by running the SETUP program. Up to 256 serial ports are supported. There is a command line-based configuration utility which is used for adding PCI bus and ISA bus serial ports . Please refer to the documentation included with the device driver for full installation and configuration detai ...

  • Quatech DSC-100 - page 22

    ports UART compatibility mode and FIFO threshold levels to be configured. The threshold values of full-scale for the transmit buffer and 3/4-scale for the receive buffer shown below are optimal for most applications. Note that the FIFO option for each of the DSC-100 's two ports is configured independently. 9. Use the Logical COM Port n ames t ...

  • Quatech DSC-100 - page 23

    6 D OS and Other Operating Systems The DSC-100 is not a direct drop-in replacement for a legacy serial port because its base address and IRQ cannot be fixed at values such as 3F8 hex, IRQ 4 (COM1) or 2F8 hex, IRQ 3 (COM2), etc. Rather, the system BIOS assigns the address and the IRQ in a plug-and-play fashion at boot time. Software which is to use ...

  • Quatech DSC-100 - page 24

    The QTPCI program is capable only of displaying the PCI configuration. It cannot be used to make changes. Q - Quatech PCI adapters N - Other PCI devices X - EXIT M - Change to Expert Mode Quatech PCI Configuration Information Display Software Version 1.00 INSTRUCTIONS: ------------------------ Press keys listed in the menu at the bottom of the scre ...

  • Quatech DSC-100 - page 25

    more details such as the Vendor and Device IDs, PCI Class Code , size of memory and I/O regions, etc. Pressing the "N" key will show similar information for all non-Quatech PCI devices in the system, including those devices integrated on the motherboard. In this example, the "Base addr 0" resource is reserved. For users interest ...

  • Quatech DSC-100 - page 26

    Quatech DSC-100 User's Manual 24 ...

  • Quatech DSC-100 - page 27

    7 OS/2 The OS/2 device driver supports up to 32 serial ports in a system. Installation is a manual, but simple, process. Please refer to the documentation included with the device driver for full installation and configuration details. Device drivers for Windows NT and OS/2 are also available for the DSC-100. The board can be used under DOS and oth ...

  • Quatech DSC-100 - page 28

    8 External Connections RS- 232 -C devices are classified by their function as either Data Terminal Equipment (DTE) or Data Communication Equipment (DCE). Generally, data terminal equipment is defined as the communication source and data communication equipment is defined as the device that provides a communication channel between two DTE-type devic ...

  • Quatech DSC-100 - page 29

    The DSC-100 is a DTE device which connects to peripheral equipment through two male D-9 connectors. An adapter cable providing two male D-25 connectors is available. The standard serial port connections are listed in Figure 19 . 22 9 22 9 Ring Indicator (RI) 4 7 5 8 Clear To Send (CTS) 5 8 4 7 Request To Send (RTS) 20 4 6 6 Data Set Ready (DSR) 7 5 ...

  • Quatech DSC-100 - page 30

    9 PCI Resource Map Listed below are the PCI resources used by the DSC-100. Such information may be of use to customers writing their own device drivers or other custom software. A detailed description of the DSC-100's UARTs is available on the Quatech web site. (all numbers in hex) PCI Vendor ID: 0x135C Quatech, Inc. PCI Device ID: 0x00 20 DSC ...

  • Quatech DSC-100 - page 31

    10 Specifications Bus interface PCI, 32 -bit bus , 5-volt only IBM - compatible computers Dimensions: approx . 5.0" x 3.7" Serial ports Controller: 16750 with 64-byte FIFOs Interface: Two male D-9 connector s, or t wo male D-25 connectors optional using adapter cable s Transmit drivers: SN75150 or compatible High-level output: +5V min, +8 ...

  • Quatech DSC-100 - page 32

    5030 4400 3500 1670 800 115.2 2100 1670 1200 1000 330 230.4 1 0 00 900 670 430 100 460.8 470 430 200 100 N/ A 921.6 25% trans time 20% trans time 15% trans time 10% trans time 4% trans time Maximum Load (pF) Data Rate (kbaud ) Note 1: The signal transition time ratio is defined as the percentage of the unit interval or bit time ( the inverse of the ...

  • Quatech DSC-100 - page 33

    11 Troubleshooting Listed here are some common problems and frequent causes of those problems. If the information here does not provide a solution, contact Quatech technical support. Any unauthorized repairs or modifications will void the DS C -100's warranty. Computer will not boot up. 1. Is the DSC-100 properly inserted? Remove the card and ...

  • Quatech DSC-100 - page 34

    DSC-100 User's Manual Revision 1.10 June 2001 P/N: 940-0138-110 Quatech DSC-100 User's Manual 32 ...

Produzent Quatech Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Quatech DSC-100 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Quatech
- Bedienungsanleitungen DSC-100
- Produktkarten Quatech
- Informationsbroschüren
- oder Energieetiketten Quatech DSC-100
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Quatech DSC-100.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Quatech DSC-100, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Quatech DSC-100. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Quatech DSC-100 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Quatech DSC-100, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Quatech DSC-100 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Quatech DSC-100 verständlich ist.

Eine gänzliche Bedienungsanleitung von Quatech sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Quatech DSC-100 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Quatech DSC-100 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Quatech DSC-100, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Quatech DSC-100 - die uns die ersten Schritte während der Nutzung von Quatech DSC-100 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Quatech DSC-100 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Quatech DSC-100 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Quatech DSC-100?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Quatech DSC-100 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Quatech DSC-100 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)