Bedienungsanleitung Vermont Casting LHERDV30

32 Seiten 1.94 mb
Download

Zur Seite of 32

Summary
  • Vermont Casting LHERDV30 - page 1

    10004894 1/07 Rev . 4 D E S I G N C E R T I F I E D CERTIFIED DO NOT ST ORE OR USE GASOLINE OR OTHER FLAMMABLE V APORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. WHA T TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electric switch; do not use any phone in your building. • Immediately call your ...

  • Vermont Casting LHERDV30 - page 2

    2 10004894 LHED V Ser ies Dir ect V ent I nse rt T able of Contents PLEASE READ THE INST ALLA TION & OPERA TING INSTRUCTIONS BEFORE USING THIS APPLIANCE. Thank you and congratulations on your purchase of a CFM Corporation fireplace insert. IMPORT ANT - Read all instructions and warnings carefully before starting installation. Failure to follow ...

  • Vermont Casting LHERDV30 - page 3

    3 10004894 LHED V Ser ies Dir ect V ent I nse rt This gas appliance should be installed by a qualified installer in accordance with local building codes and with current CSA- B149.1 Installation codes for Gas Burning Appliances and Equipment. FOR U.S. Installations follow local codes and/or the current National Fuel Gas Code ANSI Z223.1/NFP A 54. ...

  • Vermont Casting LHERDV30 - page 4

    4 10004894 LHED V Ser ies Dir ect V ent I nse rt N O P  1" M E F HEZC specs 1/03  U S R Q V T FP1248 Minimum fireplace opening 1/03 Q - Fireplace opening height R - Fireplace opening width S - Depth of insert T - Firebox width at insert depth(S) LHECDV20 LHERDV20 LHECDV30 LHERDV30 A-1 20 ⁷⁄₈ " (530 mm) 20 ⁷⁄₈ " ( ...

  • Vermont Casting LHERDV30 - page 5

    5 10004894 LHED V Ser ies Dir ect V ent I nse rt When the unit is installed into a woodburning fireplace, the minimum distance the mantel can be placed above the fireplace is governed by local building codes appli- cable to woodburning fireplaces. Consult local authori- ties having jurisdiction for these clearances. For applications requiring th ...

  • Vermont Casting LHERDV30 - page 6

    6 10004894 LHED V Ser ies Dir ect V ent I nse rt Do not use this appliance if any part of it has been under water . Immediately call a qualified service technician to inspect the unit and replace any part of the control which has been under water . Natural LP Minimum Inlet Pressure 5.5" W . C . 1 1.0" W . C . Maximum Inlet Pressure 14.0& ...

  • Vermont Casting LHERDV30 - page 7

    7 10004894 LHED V Ser ies Dir ect V e nt I nse rt FP297 INST A VENT FREE R MODEL GAS SUPPL Y 8/24/96 1/2" Gas Supply 1/2" x 3/8" Shut Off V alve 3/8" Nipple 3/8" Union FP297 Fig. 4 T ypical gas supply installation. 3/8" Nip- ple Gas Supply Pressures This heater must be isolated from the gas supply piping system by clos ...

  • Vermont Casting LHERDV30 - page 8

    8 10004894 LHED V Ser ies Dir ect V e nt I nse rt FP1330 Switch assy 4/03 Left Side Installation Right Side Installation On/Off Switch As- sembly Wiring from Millivolt Gas V alve Fig. 7 Insert ON/OFF switch with wiring assembly into bracket switch. On/Off Switch As- sembly FP13 30 Installer must attach red warning plate with screws supplied with th ...

  • Vermont Casting LHERDV30 - page 9

    9 10004894 LHED V Ser ies Dir ect V e nt I nse rt Liner Installation The collar extending down from the termination base is the air intake connector . Be sure the flex vent, which is connected to this collar , is also connected to the labelled air intake flue collar on the fireplace. Make sure the flex vent is attached on the correct collar and ...

  • Vermont Casting LHERDV30 - page 10

    10 10004894 LHED V Ser ies Dir ect V e nt I nse rt FP1280 RHEDV vent termination 1/03 Flue gas exits through the vent termination rain cap 1) Attach flexible pipe to rain cap 2) Secure with clamp 3) Attach raincap to vent termination using three screws Pull flexible pipe through vent termination Outside combus- tion air enters through the lower l ...

  • Vermont Casting LHERDV30 - page 11

    1 1 10004894 LHED V Ser ies Dir ect V e nt I nse rt Ceramic Refractory Installation 1. Remove front glass. 2. Remove logs from unit. 3. Remove refractory from package. Refractory are fragile and must be handled with care. Where at all possible, two hands should be used when handling. 4. T ake center refractory and tilt so bottom edge seats onto the ...

  • Vermont Casting LHERDV30 - page 12

    12 10004894 LHED V Ser ies Dir ect V e nt I nse rt A B C High Temperature Sealant D FP1298 RHEDV vent components 2/03 V enting Components A B C High Temperature Sealant D FP1299 RHEDV vent components 2/03 G B C High Temperature Sealant E FP1327 vent components 4/03 A D FP1300 Flex pipe 2/03 FP1300 Flex pipe 2/03 8" x 12" V ent ...

  • Vermont Casting LHERDV30 - page 13

    13 10004894 LHED V Ser ies Dir ect V e nt I nse rt Operating Instructions General Glass Information Only ceramic glass approved by CFM Cor- poration may be used for replacement on this unit. 1. The use of substitute glass will void all product warranties. 2. Care must be taken to avoid breakage of the glass. 3. Under no circumstances should this ap ...

  • Vermont Casting LHERDV30 - page 14

    14 10004894 LHED V Ser ies Dir ect V e nt I nse rt Flame Adjustment (RN/RP Models) For fireplaces equipped with HI/LO valves, flame adjustment is accomplished by rotating the HI/LO adjustment knob located near the center of the gas control. (Figs. 24 or 25)   T urn counterclockwise to decrease flame height T urn clockwise to increase ...

  • Vermont Casting LHERDV30 - page 15

    15 10004894 LHED V Ser ies Dir ect V e nt I nse rt First Firing Upon completing the gas line connection, a small amount of air will be in the lines. When first lighting unit with pilot light, it will take a few minutes to purge them- selves of this air . Once the purging is complete, the pilot and burner will light and operate as indicated in the ...

  • Vermont Casting LHERDV30 - page 16

    16 10004894 LHED V Ser ies Dir ect V e nt I nse rt 3. Open control access panel. 4. Push in gas control knob slightly and turn clock- wise to " OFF ". Do not force. 5. Close control access panel. 1. ST OP! Read the safety information above. 2. T urn off all electrical power to the fireplace. 3. For MN/MP/TN/TP appliances ONL Y , go on to ...

  • Vermont Casting LHERDV30 - page 17

    17 10004894 LHED V Ser ies Dir ect V e nt I nse rt W ARNING: Before doing any gas control service work, remove glass front. SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 1. Spark ignitor will not light A. Defective or misaligned Using a match, light pilot. If pilot lights, turn off electrode at pilot. pilot and push the red button again. If pilot will ...

  • Vermont Casting LHERDV30 - page 18

    18 10004894 LHED V Ser ies Dir ect V e nt I nse rt Gas Supply On Supply Line Hooked Up Shutoff Valve Open NO NO NO NO Lockout Has Engaged. Wait 60 Seconds And Try Again. For Spark At Electrode While Depressing Piezo — 1/8" Gap To Pilot Hood Needed. All Wiring Connections Replace Piezo Ignitor For Air In The Lines Thermopile Needs A Minimum 3 ...

  • Vermont Casting LHERDV30 - page 19

    19 10004894 LHED V Ser ies Dir ect V e nt I nse rt Instructions for RF C om fo rt C on tr ol Va lv e The Comfort Control V alve allows remote control of temperature, fan and flame appearance. NOTE: The antenna should hang in free air away from grounded metal. Operation 1. If the manual switch is in remote position, switch it to LOCAL. (Fig. 25) 2. ...

  • Vermont Casting LHERDV30 - page 20

    20 10004894 LHED V Ser ies Dir ect V e nt I nse rt Delay Timer Mode The shut off delay timer has a maximum of 2 hours and a minimum of zero minutes. T o change the timer level, press the time key followed by an arrow key . Pushing the key once will change the timer by 10 minutes. Auto Mode In the AUTO mode, the room temperature, set tem- perature, ...

  • Vermont Casting LHERDV30 - page 21

    21 10004894 LHED V Ser ies Dir ect V e nt I nse rt LED Count Service Action 8 Replace valve 7 Confirm stepper motor connection exists 5 Confirm fan connection exists and works 4 Confirm gas type; jumper in place 3 Replace thermopiles 2 T urn fan ON NOTE: Some keys are not active. 2. Slide the Remote/Local switch to REMOTE and teach the valve a t ...

  • Vermont Casting LHERDV30 - page 22

    22 10004894 LHED V Ser ies Dir ect V e nt I nse rt Light pilot burner Set manual switch to local or remote Release pilotstat knob T urn pilotstat knob from PILOT to ON If manual switch is set to LOCAL, did main burner light? T ransmitter con- trols fan T urn pilotstat knob to PILOT to turn off main burner T urn pilotstat knob to OFF to turn valve c ...

  • Vermont Casting LHERDV30 - page 23

    23 10004894 LHED V Ser ies Dir ect V e nt I nse rt Maintenance Burner and Burner Compartment It is important to keep the burner and the burner compartment clean. At least once per year the logs and lava rock/ember material should be removed and the burner compartment vacuumed and wiped out. Remove and replace the logs as per the instructions in thi ...

  • Vermont Casting LHERDV30 - page 24

    24 10004894 LHED V Ser ies Dir ect V e nt I nse rt LHERDV20/LHECDV20 1a 1d 1b 1e LHERDV30/LHECDV30 1a 1d 1c 1e 1b 3 2 4 5 6a/b 7a/b 9 a/b 8a/b 19 14 16 18 10a/b 18 17 1 1a/b 12a/b 13a/b 15 20          23 a/b 21 22a/b LOCAL REMOTE ON • PILOT OFF • LED 24a/b 25 26 27 28/29 30 31 32 ...

  • Vermont Casting LHERDV30 - page 25

    25 10004894 LHED V Ser ies Dir ect V e nt I nse rt LHEDV Series (continued) Ref. Description LHERDV20 LHECDV20 LHERDV30 LHECDV30 1. Log Set Complete 10005332 10005332 10004866 10004866 1a. Log Rear Left 10005333 (JR7) 10005333 (JR7) 10004874 (KR22) 10004874 (KR22) 1b. Log Rear Right 10005334 (JR8) 10005334 (JR8) 10004875 (KR23) 10004875 (KR23) 1c. ...

  • Vermont Casting LHERDV30 - page 26

    26 10004894 LHED V Ser ies Dir ect V e nt I nse rt Ref. Description LHER20 LHEC20 LHER30 LHEC30 LHE Series (continued) 37. Remote Switch (for RN or RP Units) 53606 53606 53606 53606 38. Remote Wire Harness w/T erminals (for RN or RP Units) 10002582 10002582 10002582 10002582 39. Ceramic Fiber Brick FP (Optional) JT1TR0 JT1TC0 KT1TR0 KT1TC0 40. Gask ...

  • Vermont Casting LHERDV30 - page 27

    27 10004894 LHED V Ser ies Dir ect V e nt I nse rt Optional Accessories Remote Controls Optional remote control units are available to control different functions of the appliance. Model Function(s) Controlled RC1 ON/OFF RC2 ON/OFF and T emperature IMTFK W all mounted thermostat control NOTE: These remote controls are for RN/RP units only . T rim O ...

  • Vermont Casting LHERDV30 - page 28

    28 10004894 LHED V Ser ies Dir ect V e nt I nse rt ...

  • Vermont Casting LHERDV30 - page 29

    29 10004894 LHED V Ser ies Dir ect V e nt I nse rt ...

  • Vermont Casting LHERDV30 - page 30

    30 10004894 LHED V Ser ies Dir ect V e nt I nse rt ...

  • Vermont Casting LHERDV30 - page 31

    31 10004894 LHED V Ser ies Dir ect V e nt I nse rt BASIC W ARRANTY CFM Corporation (hereinafter referred to collectively as the Company) warrants that your new V ermont Castings or Majestic Gas Fireplace/ Stove is free from manufacturing and material defects for a period of one year from the date of purchase, subject to the following conditions and ...

  • Vermont Casting LHERDV30 - page 32

    Efficiency Ratings Model EnerGuide Ratings Steady State (%) D.O.E. Fireplace Efficiency (%) Fan-OFF Fan-ON (AFUE%) LHECDV20RN 61.3 69 72 65 LHECDV20RP 61.3 70 73 65 LHECDV20RFN 61.3 69 72 65 LHECDV30RFP 61.3 70 73 65 LHERDV20RN 59.7 69 N/A 64 LHERDV20RP 59.7 70 N/A 64 LHECDV30RN 61.5 70 73 66 LHECDV30RP 61.5 71 74 66 LHECDV30RFN 61.5 70 73 66 LHE ...

Produzent Vermont Casting Kategorie Ventilation Hood

Dokumente, die wir vom Produzenten des Geräts Vermont Casting LHERDV30 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Vermont Casting
- Bedienungsanleitungen LHERDV30
- Produktkarten Vermont Casting
- Informationsbroschüren
- oder Energieetiketten Vermont Casting LHERDV30
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Vermont Casting LHERDV30.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Vermont Casting LHERDV30, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Vermont Casting LHERDV30. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Vermont Casting LHERDV30 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Vermont Casting LHERDV30, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Vermont Casting LHERDV30 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Vermont Casting LHERDV30 verständlich ist.

Eine gänzliche Bedienungsanleitung von Vermont Casting sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Vermont Casting LHERDV30 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Vermont Casting LHERDV30 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Vermont Casting LHERDV30, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Vermont Casting LHERDV30 - die uns die ersten Schritte während der Nutzung von Vermont Casting LHERDV30 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Vermont Casting LHERDV30 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Vermont Casting LHERDV30 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Vermont Casting LHERDV30?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Vermont Casting LHERDV30 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Vermont Casting LHERDV30 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)