-
Harman-Kardon CDR 2 - page 1
CDR 2 CD Recorder OWNER’S MANU AL Power for the digital revolution. ™ ® ...
-
Harman-Kardon CDR 2 - page 2
2 T ABLE OF CONTENTS 3 Introduction 3 Important Information on CD Recording 4 Safety Information 5 F ront-P anel Controls 7 F ront-P anel Information Display 9 Rear -Panel Connections 10 Remote Control Functions 12 Installation and Connections 14 CD Recording Basics 15 Playback Basics 15 Loading and Unloading Discs 15 Using the Remote 16 Normal Pla ...
-
Harman-Kardon CDR 2 - page 3
3 INTRODUCTION Introduction Thank you for choosing Harman Kardon. T he CDR 2 Dual-Deck CD Player/Recorder is a unique product, designed not only to play back your existing library of compact discs , but also to record compact discs from either analog or digital programs . Y ou may feed signals (for recording) to the CDR 2 from external sources such ...
-
Harman-Kardon CDR 2 - page 4
4 SAFETY INFORMA TION Safety Information Important Safety Information V erify Line V oltage Before Use Y our CDR 2 has been designed for use with 120-volt AC current. Connection to a line volt- age other than that for which it is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requir ...
-
Harman-Kardon CDR 2 - page 5
5 FRONT -P ANEL CONTROLS 1 P ower Switch: Press this switch to apply power to the CDR 2. When the unit is first turned on, the Status-Mode Indicator 2 surrounding the switch will turn green. Once the unit has been turned on with this switch, it may be operated from either the front panel or remote control. Press the switch again to turn the unit co ...
-
Harman-Kardon CDR 2 - page 6
6 FRONT -P ANEL CONTROLS Front-P anel Controls @ Finalize: Press this button when a record- ing is complete to initiate the finalization process . The Play/Select Button *j must be pressed within three seconds to acti- vate finalization. Until this button is pressed and the finalization process is complete , CD-R discs may not be played on conventi ...
-
Harman-Kardon CDR 2 - page 7
7 FRONT -P ANEL INFORMA TION DISPLA Y Front-P anel Information Display A C U W D B E F G I H A J K L M N O L M N O P Q Q R S S T V X Y K C D B E A Random Indicators B Program Indicators C Level Indicators D Repeat Indicators E Repeat-Status Indicators F Speed Indicators G Copy-Prohibit Indicator H Dubbing Indicator I Sync Indicator J Dual-Play Indi ...
-
Harman-Kardon CDR 2 - page 8
8 FRONT -P ANEL INFORMA TION DISPLA Y L Time Indicator: This indicator lights in con- junction with one of the time indicators OPQ to show which of the time status modes is active . M Remaining-Time Indicator: This indicator lights when the Information Display K shows the time remaining on a disc. N T otal Time: T his indicator lights when the Info ...
-
Harman-Kardon CDR 2 - page 9
9 REAR-P ANEL CONNECTIONS Rear -P anel Connections ¡ ™ £ ¢ ∞ § ¶ • ª ‚ ⁄ ¤ ¡ Play (CDP)-Deck Analog Output ™ Record (CDR)-Deck Analog Output £ Record (CDR)-Deck Analog Input ¢ Play (CDP)-Deck Coaxial-Digital Output ∞ Record (CDR)-Deck Coaxial-Digital Output § Record (CDR)-Deck Coaxial-Dig ...
-
Harman-Kardon CDR 2 - page 10
10 REMO TE CONTROL FUNCTIONS ● ● ● ● ● ● Remote Control Functions a P ower -On Button b Play (CDP)-Deck Display Control c Play (CDP)-Deck Open d Play (CDP)-Deck Select e Program f Reverse Search g Single h Program Check i Previous-T rack Skip j Play/Select k Random Play l Dub m Automatic/Manual T rack Increment Selector n T rack Increme ...
-
Harman-Kardon CDR 2 - page 11
11 REMO TE CONTROL FUNCTIONS Remote Control Functions a P ower -On Button: Press this button to turn the CDR 2 on. Note that in order for this control to function, the Front-P anel P ower Switch 1 must first be pressed so that the unit is in the Standby mode . b Play (CDP)-Deck Display Control: Press this button to cycle through the various time di ...
-
Harman-Kardon CDR 2 - page 12
12 INST ALLA TION AND CONNECTIONS Important Note: To prevent possible damage to your speak ers or other components in your audio system, we strongly recommend that ALL system components , including the CDR 2, be turned off and unplugged from their AC power source when any connections are made or a new component is installed. Locating the CDR 2 Sinc ...
-
Harman-Kardon CDR 2 - page 13
13 INST ALLA TION AND CONNECTIONS Installation and Connections Batteries Insert the two AA batteries supplied with CDR 2’ s remote by turning the remote over so that the bottom of the remote is facing towards you. Gently lift the plastic tab on the battery cover up and away from you, and lift the lid off . Insert the batteries in the remote , bei ...
-
Harman-Kardon CDR 2 - page 14
14 CD RECORDING BASICS CD Recorders (CDRs) are similar to standard CD players , with the addition of the features and controls needed for recording. Functions such as play , search and programming for playback will be familiar , but the recorder will function slightly differently than what you may be used to for magnetic tape recorders . Disc T ype ...
-
Harman-Kardon CDR 2 - page 15
15 PLA YBA CK BASICS Playback of CDs on the CDR 2 resembles that for traditional CD players with a few exceptions to accommodate the availability of two sepa- rate playback decks . Before using the CDR 2, power -up the unit by pressing in the Main P ower Switch 1 until it latches. Note that the Status-Mode Indicator 2 will turn green, indicating th ...
-
Harman-Kardon CDR 2 - page 16
16 PLA YBA CK BASICS Playback Basics Normal Play T o play a disc, first mak e certain that the unit is properly installed and that the Main P ower Switch 1 is turned on. T urn the CDR 2 on by pressing the P ower -On button a on the remote and note that the front-panel display will illuminate . Insert a disc following the instructions shown on the p ...
-
Harman-Kardon CDR 2 - page 17
17 PLA YBA CK BASICS Dual-Play Mode Since the CDR 2 has more than one CD deck, you may play a disc in either drawer . When only one deck is playing, the unit is in the Single mode . In the Single mode , the audio output will be fed to all digital and analog jacks for both decks . This means you may select the input on your receiver , preamp or proc ...
-
Harman-Kardon CDR 2 - page 18
18 PROGRAM PLA Y Progr am Play T he CDR 2’ s advanced programming system enables you to preset the order in which tracks are played, to repeat one tr ack or all tracks , or to repeat any segment of a disc without regard to track numbers . Programming Play Lists T o program the order of playback for the tr acks on a disc, insert the disc, let the ...
-
Harman-Kardon CDR 2 - page 19
19 PROGRAM PLA Y Progr am Play Repeat A-B T he CDR 2 may be programmed to repeat any section within a track, or a complete passage that includes material from a series of consecu- tive tracks . T o program the unit for A-B Repeat play , first play the disc and locate the point where you wish to begin the repeated section. At the start point, press ...
-
Harman-Kardon CDR 2 - page 20
20 CD RECORDING CD Recording Making recordings on the CDR 2 is simple and easy once you become accustomed to the basics of CD Recording. Before making your first recording, please tak e a moment to review the CDR Basics on page 14. In particular , you will need to become familiar with the types of discs that may or may not be used in the CDR 2. In ...
-
Harman-Kardon CDR 2 - page 21
21 CD RECORDING CD Recording Notes on Dubbing: • If you wish to mak e a dub with the tracks in a different order from the original disc, omit tracks on a disc, or make a dub that mixes tracks from different discs , create a Program- Playback List before pressing the Select button j* to start the dub . Instructions for creating a Program List may ...
-
Harman-Kardon CDR 2 - page 22
22 CD RECORDING CD Recording Unlik e conventional analog tape recorders , the CDR 2 does not require level setting when recordings are made from a digital source . Although the Level Indicator C will operate , this is only informative and the level may not be changed or adjusted. However , when you are making a recording from an external analog sou ...
-
Harman-Kardon CDR 2 - page 23
23 TROUBLESHOO TING GUIDE T r oubleshooting Guide and Error Messages TROUBLE SHOO TING GUIDE SYMPT OM POSSIBLE CAUSE SOLUTION Unit does not operate when Standby switch • No AC power • Mak e certain AC power cord is plugged into a live outlet. or remote P ower -On is pressed • Check to see if AC outlet is switch controlled. • Main P ower Swi ...
-
Harman-Kardon CDR 2 - page 24
250 Crossways P ark Drive, W oodbury , New Y ork 11797 www .harmankardon.com © 1999 Harman Kardon, Incorporated P art #3828SND043A Signal Format Playback Sampling F requency 44.1 kHz D/A Conversion 96kHz, Multi-Bit Delta-Sigma Conversion Oversampling 128 T imes Playback Specifications F requency Response 2Hz – 20,050Hz Playback S/N 105dB Playbac ...
Haben Sie eine Frage bezüglich Harman-Kardon CDR 2?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Harman-Kardon CDR 2 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Harman-Kardon CDR 2 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.