Bedienungsanleitung TOA Electronics HB-1

12 Seiten 0.36 mb
Download

Zur Seite of 12

Summary
  • TOA Electronics HB-1 - page 1

    OPERA TING INSTR UCTIONS SUB-W OOFER SYSTEM HB-1 Please follow the instructions in this manual to obtain optimum results from this unit. We also recommend that you keep this manual handy for future reference. T ABLE OF CONTENTS 1. SAFETY PRECA UTIONS ............................................................................... 2 2. GENERAL DESCRI ...

  • TOA Electronics HB-1 - page 2

    2 When Installing the Unit • Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury and/or property damage. • Use nuts and bolts that are appropriate for the ceiling's or wall's structure and comp ...

  • TOA Electronics HB-1 - page 3

    3 2. GENERAL DESCRIPTION The TOA HB-1 is a high-power, wall/ceiling-mounted sub-woofer system employing a 20 cm speaker unit. Although small in size, the HB-1 provides clear super-low frequency sound reproduction thanks to its Acoustic Super Woofer enclosure construction. 3. FEA TURES • A large, 110 mm-diameter ferrite magnet, a long, 35 mm-diame ...

  • TOA Electronics HB-1 - page 4

    4 6. INST ALLA TION 6.1. Contents Check to be sure that the following components are available in a complete set before installation: Speaker ..... 1 Stud holder ..... 4 Masking tape ..... 4 "Short"... 2 "Long"... 2 Cutout template ..... 1 Mounting screws/washers Tapping screw (3x8) .... 4 Screw (M5x10) .... 4 Screw (M4x30) .... ...

  • TOA Electronics HB-1 - page 5

    5 Step 2. Loosen the screws of the hook clips (4 places) attached to the mounting bracket and leave each screw sticking out approximately 2 mm. Step 3. Insert the mounting bracket into the hole made in Step 1, and mount it to the back of the wall or ceiling panel. To mount, clamp the wall or ceiling panel with the hook clips (4 places), then tighte ...

  • TOA Electronics HB-1 - page 6

    6 Step 5. Install the supplied speaker fixing screws (4 pieces with M4x30 plain and spring washers) in the mounting bracket so that they are left sticking out 2 – 3 mm from the mounting surface. (They are tightened in Step 10.) Step 6. Loosen the unit's lock tab screws (4 places) and leave them sticking out 2 – 3 mm. (They are tightened in ...

  • TOA Electronics HB-1 - page 7

    7 Step 8. Reinsert the detachable input connector into the unit's socket, then fit the unit in the mounting bracket. Step 9. Rotate the lock tabs (4 places) until each contacts the fixing screw head left sticking out in Step 5. Step 10. Retighten both the fixing screws (4 places) and lock tab screws (4 places). Step 11. Using two more supplied ...

  • TOA Electronics HB-1 - page 8

    8 6.3. Suspending the Unit in the Ceiling When suspending the HB-1 speaker in the ceiling, remove the lock tabs and suspend the unit using bolts or wires at the resultant 12 mm-diameter holes. The front grille can be mounted directly to the ceiling panel using the supplied mounting bracket. 6.3.1. Suspending the unit 6.3.2. Front grille installatio ...

  • TOA Electronics HB-1 - page 9

    9 7. MA TCHING TRANSFORMER INST ALLA TION An optional MT-S0601 matching transformer can be installed in the HB-1 speaker. Step 1. Remove the 13 enclosure cover fixing screws to detach the cover. Step 2. Remove the two screws located inside an enclosure. Using the removed two screws, mount the MT- S0601 transformer so that its connection tab is faci ...

  • TOA Electronics HB-1 - page 10

    10 8. CR OSSO VER CONNECTIONS WITH A FULL-RANGE SPEAKER 8.1. Recommended Filters f or the HB-1 • Because the HB-1's enclosure construction is designed to create an acoustic band-pass filter, the mid and high frequency audio ranges are cut even if the input signal band is not limited with a low-pass filter. Therefore, the HB-1 functions as a ...

  • TOA Electronics HB-1 - page 11

    11 9. CA UTIONS CONCERNING HIGH-IMPED ANCE APPLICA TIONS To avoid damaging the HB-1 speaker in high-impedance applications (with the MT-S0601 matching transformer installed), be sure to observe the following conditions: 1. Do not limit the input signal band using such devices as a low-pass filter, but instead drive the speaker with the full-range s ...

  • TOA Electronics HB-1 - page 12

    10. SPECIFICA TIONS 533-06-067-00 Enclosure Type Acoustic Super Woofer system Power Handling Continuous program: 240 W (40 – 200 Hz) Continuous pink noise: 80 W (40 – 200 Hz) Rated Impedance 8 Ω Sound Pressure Level 91 dB (1W, 1m), installation in 1/2 free sound field 85 dB (1 W, 1m), installation in free sound field Frequency Response 45 – ...

Produzent TOA Electronics Kategorie Speaker

Dokumente, die wir vom Produzenten des Geräts TOA Electronics HB-1 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen TOA Electronics
- Bedienungsanleitungen HB-1
- Produktkarten TOA Electronics
- Informationsbroschüren
- oder Energieetiketten TOA Electronics HB-1
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung TOA Electronics HB-1.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen TOA Electronics HB-1, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen TOA Electronics HB-1. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts TOA Electronics HB-1 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts TOA Electronics HB-1, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von TOA Electronics HB-1 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von TOA Electronics HB-1 verständlich ist.

Eine gänzliche Bedienungsanleitung von TOA Electronics sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von TOA Electronics HB-1 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von TOA Electronics HB-1 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich TOA Electronics HB-1, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts TOA Electronics HB-1 - die uns die ersten Schritte während der Nutzung von TOA Electronics HB-1 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit TOA Electronics HB-1 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von TOA Electronics HB-1 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich TOA Electronics HB-1?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit TOA Electronics HB-1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit TOA Electronics HB-1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)