Deutsch dropdown-ico

Bedienungsanleitung Axis Communications M1124-E

65 Seiten 1.22 mb
Download

Zur Seite of 65

Summary
  • Axis Communications M1124-E - page 1

    AXIS M1 124–E Network Camera User Manual ...

  • Axis Communications M1124-E - page 2

    About this Document This manual is intended for administrators and users of AXIS M1 124–E Network Camera, and is applicable to rmware 5.70 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syste ...

  • Axis Communications M1124-E - page 3

    The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SELV) and Limited P ower Source (LPS) according to IEC/EN/UL 60950-1. Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a ...

  • Axis Communications M1124-E - page 4

    AXIS M1124–E Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications M1124-E - page 5

    AXIS M1124–E Network Camera T able of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications M1124-E - page 6

    AXIS M1124–E Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not avoi ...

  • Axis Communications M1124-E - page 7

    AXIS M1124–E Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 8 7 1 T op cover 2 Front window 3 Network camera 4 Holder screw (2x) 5 Drill-outs for extra cables holes 6 Cable gasket 7 Desiccant bag 8 Safety wire 7 ...

  • Axis Communications M1124-E - page 8

    AXIS M1124–E Network Camera Hardware Overview 1 2 10 1 1 1 2 6 7 8 9 3 4 5 1 Zoom puller 2 Focus ring 3 P ower connector 4 Control button 5 Network connector 6 P ower LED 7 Status LED 8 Network LED 9 microSD card slot 1 0 Iris connector 1 1 I/O connector 12 ¼ ² Screw mount Connectors and Buttons For technical specications, see page 6 1 . Net ...

  • Axis Communications M1124-E - page 9

    AXIS M1124–E Network Camera Hardware Overview • Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > P orts & D ...

  • Axis Communications M1124-E - page 10

    AXIS M1124–E Network Camera Hardware Overview Amber Steady for connection to a 1 0 Mbit/s network. Flashes for network activity . Unlit No network connection. Note The P ower LED can be congured to be unlit during normal operation. T o congure, go to Setup > System Options > P orts & Devices > LED . See the online help for more ...

  • Axis Communications M1124-E - page 11

    AXIS M1124–E Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® and • Chrome TM or Firefox ® with ...

  • Axis Communications M1124-E - page 12

    AXIS M1124–E Network Camera Access the Product For Technical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product i ...

  • Axis Communications M1124-E - page 13

    AXIS M1124–E Network Camera Access the Product Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure stream proles, see page 2 1 . Click Pulse to activate the product’s output port for a dened period of time. For information about how to enable and congure outpu ...

  • Axis Communications M1124-E - page 14

    AXIS M1124–E Network Camera Access the Product The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specied in the AMC Control P anel. Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view . The ...

  • Axis Communications M1124-E - page 15

    AXIS M1124–E Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applic ...

  • Axis Communications M1124-E - page 16

    AXIS M1124–E Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P anel ...

  • Axis Communications M1124-E - page 17

    AXIS M1124–E Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 17 ...

  • Axis Communications M1124-E - page 18

    AXIS M1124–E Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all se ...

  • Axis Communications M1124-E - page 19

    AXIS M1124–E Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 19 . • Stream proles. See page 2 1 . • Camera settings. See page 2 1 . • View areas. See page 23 . • Overlay image. See page 23 . • Privacy mask. See page 25 . Set Up Video Streams To set ...

  • Axis Communications M1124-E - page 20

    AXIS M1124–E Network Camera Video Click Save to apply the new settings. H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-fram ...

  • Axis Communications M1124-E - page 21

    AXIS M1124–E Network Camera Video Lowest Zipstream strength is the default setting for the product. This conguration is very safe to use in all applications while still reducing the bit rate. For cloud-connected cameras or cameras using edge storage that need to limit the bit rate for increased storage time it is recommended to select the High ...

  • Axis Communications M1124-E - page 22

    AXIS M1124–E Network Camera Video White Balance To change this setting go to Setup > Video > Camera Settings White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color . Alternat ...

  • Axis Communications M1124-E - page 23

    AXIS M1124–E Network Camera Video Iris adjustment Select Enable automatic iris adjustment to automatically compensate for changing light conditions. This option is not available if a xed iris is used. Day/Night The IR cut lter prevents infrared (IR) light from reaching the image sensor . In poor lighting conditions, for example at night, or ...

  • Axis Communications M1124-E - page 24

    AXIS M1124–E Network Camera Video It is also possible to display text when an action rule is triggered, see Use Overlay Text in an Action Rule . To enable overlays: 1. Go to Video > Video Stream and select the Image tab. 2. T o include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded ...

  • Axis Communications M1124-E - page 25

    AXIS M1124–E Network Camera Video To display the overlay image: 1. Go to Video > Video Stream and select the Image tab. 2. Under Overlay Settings , select Include overlay image at the coordinates . 3. T o control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner . If a part of the image is p ...

  • Axis Communications M1124-E - page 26

    AXIS M1124–E Network Camera Video Important Adding many privacy masks may affect the product’s performance. 26 ...

  • Axis Communications M1124-E - page 27

    AXIS M1124–E Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 2 1 . • Default Viewer for Browser . See page 27 . • Viewer Settings. See pa ...

  • Axis Communications M1124-E - page 28

    AXIS M1124–E Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved ...

  • Axis Communications M1124-E - page 29

    AXIS M1124–E Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan T ilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 23 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic posi ...

  • Axis Communications M1124-E - page 30

    AXIS M1124–E Network Camera PTZ (Pan Tilt Zoom) 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify or remove guard tours, go to PTZ > Guard Tour , select the ...

  • Axis Communications M1124-E - page 31

    AXIS M1124–E Network Camera PTZ (Pan Tilt Zoom) 2. Event — The Axis product can be congured to go to a preset position when triggered by an alarm (see Events on page 37 ). The event will immediately be placed rst in the queue except when an administrator is in control. 3. Operator — Same as administrator but with lower priority 4. Guard ...

  • Axis Communications M1124-E - page 32

    AXIS M1124–E Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, spray-painted or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering detection: 1. Go to Detectors > Camera T ...

  • Axis Communications M1124-E - page 33

    AXIS M1124–E Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detect ...

  • Axis Communications M1124-E - page 34

    AXIS M1124–E Network Camera Detectors Note • T o trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • T o avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high hist ...

  • Axis Communications M1124-E - page 35

    AXIS M1124–E Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, down ...

  • Axis Communications M1124-E - page 36

    AXIS M1124–E Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 36 ...

  • Axis Communications M1124-E - page 37

    AXIS M1124–E Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule ...

  • Axis Communications M1124-E - page 38

    AXIS M1124–E Network Camera Events - Day/Night Mode – T rigger the rule when the product switches between day mode (IR cut lter on) and night mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected to an output port. - Live Stream Accessed – Trigger the rule when any stream is accessed a ...

  • Axis Communications M1124-E - page 39

    AXIS M1124–E Network Camera Events Actions Available actions include: • Day/Night Vision Mode – Set day mode (IR cut lter on) or night mode (IR cut lter off). • Output P ort – Activate an I/O port to control an external device. • Overlay T ext – Display an overlay text. See Use Overlay T ext in an Action Rule on page 25 . • PT ...

  • Axis Communications M1124-E - page 40

    AXIS M1124–E Network Camera Events FTP Send Images Send Video Clip SFTP Send Images Send Video Clip Encrypted le transfer using SSH File T ransport Protocol (SFTP). SFTP is a more secure method than FTP but le transfer might be slower , especially for large les such as high resolution video. Specify login information for the SFTP server ...

  • Axis Communications M1124-E - page 41

    AXIS M1124–E Network Camera Events certicate can be validated using the certicates available in the Axis product. For information on how to upload certicates, see Certicates on page 46 . Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ...

  • Axis Communications M1124-E - page 42

    AXIS M1124–E Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 43 . • To set up action rules, see page 37 . • To access recordings, see Find Recordings on page 42 . • To play recordings, see Play Recording on pag ...

  • Axis Communications M1124-E - page 43

    AXIS M1124–E Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. T o reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters. See also Find Recordings on page 42 . 3. Select the recording and click Play . The recording wi ...

  • Axis Communications M1124-E - page 44

    AXIS M1124–E Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Se ...

  • Axis Communications M1124-E - page 45

    AXIS M1124–E Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may ...

  • Axis Communications M1124-E - page 46

    AXIS M1124–E Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired ...

  • Axis Communications M1124-E - page 47

    AXIS M1124–E Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > ...

  • Axis Communications M1124-E - page 48

    AXIS M1124–E Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network administ ...

  • Axis Communications M1124-E - page 49

    AXIS M1124–E Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the document Assign an IP Address and Access the Video Stream on Axi ...

  • Axis Communications M1124-E - page 50

    AXIS M1124–E Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server . To ...

  • Axis Communications M1124-E - page 51

    AXIS M1124–E Network Camera System Options Use manually selected NA T router - Select this option to manually select a NA T router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NA T routers on your network. If more than one router is found, the default router is selected. ...

  • Axis Communications M1124-E - page 52

    AXIS M1124–E Network Camera System Options Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message. Note If HTTPS is enabled, SNMP v1 and SNMP v2c shoul ...

  • Axis Communications M1124-E - page 53

    AXIS M1124–E Network Camera System Options Storage SD Card NO NO NO TICE TICE TICE To prevent data corruption, the SD card should be unmounted before removal. Note For SD card recommendations see www .axis.com The Axis product supports microSD/microSDHC/microSDXC cards. The following SD card le systems are supported: • ext4 — recommended d ...

  • Axis Communications M1124-E - page 54

    AXIS M1124–E Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Open the Axis product’s webpages and go to Setup > System Options > Storage . 3. Click SD Card . 4. Click Format and select the desired le system. 5. Click OK to start formatting the card. Network Share Network share allows you to add network stora ...

  • Axis Communications M1124-E - page 55

    AXIS M1124–E Network Camera System Options Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factory default values. The following settings are not affected: • the boot protocol (DHCP or static) • the static IP address • the default router • the subnet mask • the system time • the IEEE ...

  • Axis Communications M1124-E - page 56

    AXIS M1124–E Network Camera System Options P arameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams. Crash Report - Generates an archive with debugging information. The ...

  • Axis Communications M1124-E - page 57

    AXIS M1124–E Network Camera System Options 5. Using the installation and management software tools, assign an IP address, set the password, and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance . 57 ...

  • Axis Communications M1124-E - page 58

    AXIS M1124–E Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The c ...

  • Axis Communications M1124-E - page 59

    AXIS M1124–E Network Camera Troubleshooting The IP address is being used by another device Disconnect the Axis product from the network. Run the Ping command (in a Command/DOS window , type ping and the IP address of the product): • If you receive: Reply from <IP address>: bytes=32; time=10... this means that the IP address may already be ...

  • Axis Communications M1124-E - page 60

    AXIS M1124–E Network Camera Troubleshooting Installation of additional ActiveX component restricted or prohibited Congure the Axis product to use a Java applet for updating video images in your browser . Go to Setup > Live View Cong and select Java applet under Default viewer . P oor rendering of H.264 images Ensure that your graphics ca ...

  • Axis Communications M1124-E - page 61

    AXIS M1124–E Network Camera T echnical Specifications T echnical Specifications Camera Image sensor Progressive scan RGB CMOS 1/2.8" Lens Varifocal, IR corrected, CS-mount, Megapixel resolution, DC-iris, 3-1 0.5 mm, 9 1–32° view a , 49–18° view b Day and night Automatically removable infrared-cut lter Minimum illumination Color: 0 ...

  • Axis Communications M1124-E - page 62

    AXIS M1124–E Network Camera T echnical Specifications Built-in installation aids Pixel counter General Casing IP66- and NEMA 4X-rated, IK1 0 impact-resistant polymer enclosure Color: White NCS S 1 00 2-B Memory 5 12 MB RAM, 256 MB Flash P ower 8-28 V DC or P ower over Ethernet (P oE) IEEE 802.3af Class 2, max. 5.0 W , typical 3.6 W Connectors RJ ...

  • Axis Communications M1124-E - page 63

    AXIS M1124–E Network Camera T echnical Specifications Digital Input 3 Connect to pin 1 to activate, or leave oating (unconnected) to deactivate. 0 to max 30 V DC Digital Output 4 Connected to pin 1 when activated, oating (unconnected) when deactivated. If used with an inductive load, e.g. a relay , a diode must be connected in parallel wit ...

  • Axis Communications M1124-E - page 64

    AXIS M1124–E Network Camera T echnical Specifications • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect performance. • If the product includes several camera units, running applications on multi ...

  • Axis Communications M1124-E - page 65

    User Manual V er . M1.6 AXIS M1 124–E Network Camera Date: June 20 15 © Axis Communications AB, 20 15 P art No. 6 1763 ...

Produzent Axis Communications Kategorie Home Security System

Dokumente, die wir vom Produzenten des Geräts Axis Communications M1124-E erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Axis Communications
- Bedienungsanleitungen M1124-E
- Produktkarten Axis Communications
- Informationsbroschüren
- oder Energieetiketten Axis Communications M1124-E
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Axis Communications M1124-E.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Axis Communications M1124-E, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Axis Communications M1124-E. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Axis Communications M1124-E ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Axis Communications M1124-E, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Axis Communications M1124-E hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Axis Communications M1124-E verständlich ist.

Eine gänzliche Bedienungsanleitung von Axis Communications sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Axis Communications M1124-E bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Axis Communications M1124-E befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Axis Communications M1124-E, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Axis Communications M1124-E - die uns die ersten Schritte während der Nutzung von Axis Communications M1124-E erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Axis Communications M1124-E hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Axis Communications M1124-E im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Axis Communications M1124-E?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Axis Communications M1124-E nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Axis Communications M1124-E hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)