Bedienungsanleitung Bulldog Security 1402

14 Seiten 0.2 mb
Download

Zur Seite of 14

Summary
  • Bulldog Security 1402 - page 1

        INSTALLATION GUIDE  OWNER'S GUIDE Keyless Entry and Alarm System Model 1402 BULLDOG SECURITY Creating A Higher Standard Thank you for purchasing an American made product by Bulldog Security . To order additional transmitters or other accessories, visit our website at www.directwholesale.net or call 1-800-659-0764 FOR TECHNIC ...

  • Bulldog Security 1402 - page 2

        CONTENTS 3 System Features ...............................................4 - 5 System Components .............................................6 Required Tools .....................................................6 Technical Assistance .............................................6 Before You Begin .................................. ...

  • Bulldog Security 1402 - page 3

        5 SYSTEM FEATURES CONT. On-Board Built-in relay provides a positive (+) Parking parking light output. No relay needed. Light Relay On-Board Door Built-in relay for Type A, Type B and Lock Relay Type C door locks. Plug In Six A visual theft deterrent that flashes when Function LED the system is armed. Lets you know Status Indicator w ...

  • Bulldog Security 1402 - page 4

        7 BEFORE YOU BEGIN CONT. PRECAUTIONS This system will add remote keyless entry features to any vehicle with power door locks. This will also work as a replacement system for the factory installed keyless entry system. Use masking tape to indicate the preferred mounting locations of interior components, LED and override switch. Disco ...

  • Bulldog Security 1402 - page 5

        9 6. Use electrical tape to wrap. Be sure to cover the wire about two inches on either side of the connection. First pull the wire that you have just connected along side the wire you connected to, tape and wire tie them together. Use this method for all connections. CAUTION: All wires must be wrapped with tape and wire tied. 5. Wra ...

  • Bulldog Security 1402 - page 6

        11 LOCATING & MAKING CONNECTIONS CONT. 3. Turn the ignition ON. Probe for a wire that shows 12 volts only when the ignition is on. Confirm this by turning the ignition on and off while probing each wire. 4. Mark this wire with its function Ignition Power. 5. If these wires cannot be located, please call our technical suppo ...

  • Bulldog Security 1402 - page 7

        13 LOCATING & MAKING CONNECTIONS CONT. CONNECTING THE MAIN WIRING HARNESS TO THE MODULE Carefully plug the main harness into the 1402 module. DO NOT plug the harnesses into the control module until all connections have been made. Be careful to line up the pins on the unit with the wiring harness plug (lip up - Red wire to the ri ...

  • Bulldog Security 1402 - page 8

        CONNECTING THE CAR HORN WIRE You must use optional part #775. MOUNTING AND CONNECTING THE OPTIONAL SIREN Select a location under the hood for the siren. For best results, the location should meet the following conditions: The mounting location should be solid and have no moving parts nearby. For the loudest sound, the siren sh ...

  • Bulldog Security 1402 - page 9

        18 TESTING: Door Locks  There are four basic types: Type A Door Lock Test (Most GMs and some Chryslers) Probe both of your door lock wires going to the door lock switch usually located in the drivers kick panel. Attach the clip end of your test light to a good chassis ground. Using the vehicles door lock controls, act ...

  • Bulldog Security 1402 - page 10

        19 TESTING DOOR LOCKS CONT. wires tests (+) positive when lock is pressed and the other tests (+) positive when they are unlocked, your vehicle has a Type A door locking system. Make sure to mark which wire is lock and unlock. Proceed to Connecting Door Locks, Connecting Door Locks. NOTE: Type A and Type C locks wi ...

  • Bulldog Security 1402 - page 11

        22 HOW TO USE YOUR REMOTE TRANSMITTER BUTTON #2 OPTION #2 BUTTON #4 BUTTON #1 ARM/DISARM BUTTON #3 OPTION #3 KEYLESS ENTRY FUNCTIONS LOCKING DOORS Press transmitter Button #1 to lock the doors. The parking lights will flash once and the horn or siren will sound acknowledging the unit received the signal. UNLOCKING DOORS Pressing tra ...

  • Bulldog Security 1402 - page 12

        24 HOW TO USE YOUR REMOTE TRANSMITTER CONT. VALET MODE To activate Valet Mode, first disarm the system. Hold Button #4 for ten (10) seconds and the system will chirp once. Press Button #4 again within two (2) seconds and the system will chirp once again. The LED will remain on when in valet mode. To deactivate the valet mode, repeat ...

  • Bulldog Security 1402 - page 13

        26 KEEP THIS MANUAL IN YOUR GLOVEBOX TO USE AS A REFERENCE. CLEARING THE E-PROM MEMORY Take the BLACK wire with the green tag and attach it to a chassis ground (shock or microwave sensor input) white plug with the override switch. Then cycle the ignition key from off to run six times within five seconds. The YELLOW WITH ...

  • Bulldog Security 1402 - page 14

        JBS Technologies, LLC 225 Technology Way Steubenville, OH 43952 Toll Free: 800.878.8007 Fax: 740.282.1201 www.bulldogsecurity.com email: techsupp@bulldogsecurity.com JBS T echnologies produces the world's most innov ative and reliable car alarms, remote starters, keyless entry systems and starter immobilizers. JBS T echnologies ...

Produzent Bulldog Security Kategorie Automobile Alarm

Dokumente, die wir vom Produzenten des Geräts Bulldog Security 1402 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Bulldog Security
- Bedienungsanleitungen 1402
- Produktkarten Bulldog Security
- Informationsbroschüren
- oder Energieetiketten Bulldog Security 1402
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Bulldog Security 1402.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Bulldog Security 1402, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Bulldog Security 1402. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Bulldog Security 1402 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Bulldog Security 1402, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Bulldog Security 1402 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Bulldog Security 1402 verständlich ist.

Eine gänzliche Bedienungsanleitung von Bulldog Security sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Bulldog Security 1402 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Bulldog Security 1402 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Bulldog Security 1402, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Bulldog Security 1402 - die uns die ersten Schritte während der Nutzung von Bulldog Security 1402 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Bulldog Security 1402 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Bulldog Security 1402 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Bulldog Security 1402?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Bulldog Security 1402 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Bulldog Security 1402 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (1)

Игорь

Инструкция паровой печи miele dg4060 на русском языке