-
Pelco CC4600 Series - page 1
CC4600 Series 1/3-inch Color Cameras Installation/Operation Manual C1902M (11/96) ® Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981 FAX (800) 289-9150 or (1-559) 292-3827 International Customers call (1-559) 292-1981 or FAX (1-559) 348-1120 ...
-
Pelco CC4600 Series - page 2
20 Pelco Manual C1902M (1 1/96) TABLE OF CONTENTS Section Page 1.0 IMPORT ANT SAFEGUARDS ............................................................................................................. 1 1.1 FCC INFORMA TION ................................................................................................................ 2 1.2 SAFETY PR ...
-
Pelco CC4600 Series - page 3
Pelco Manual C1902M (1 1/96) 1 1.0 IMPORT ANT SAFEGUARDS 1. Read Instructions - All the safety and operating instruc- tions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed W arnings - All warnings on the unit and in the oper- ating instructio ...
-
Pelco CC4600 Series - page 4
2 Pelco Manual C1902M (1 1/96) CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN 1.1 FCC INFORMA TION For USA customers W ARNING - This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ...
-
Pelco CC4600 Series - page 5
Pelco Manual C1902M (1 1/96) 3 2.0 DESCRIPTION The CC4600 series cameras are compact, rugged, full performance general purpose color CCD cameras. Contempo- rary styling and concealed controls allow these cameras to blend naturally into the most modern installation sites. These cameras are 1/3-inch image format and are available in the following mod ...
-
Pelco CC4600 Series - page 6
4 Pelco Manual C1902M (1 1/96) 2.1 LOCA TION AND FUNCTION OF P A R T S 2.1.1 Top/Front/Side (Illustration A ) Focal length adjustment ring and locking screw Use this ring to adjust the focal length (the dis- tance between the lens mounting plane and the image plane). Use the locking screw to lock the focal length. Lens mount Use to mount an appropr ...
-
Pelco CC4600 Series - page 7
Pelco Manual C1902M (1 1/96) 5 B 6 13 7 8 9 10 11 12 14 16 17 18 17 18 15 13 2.1.2 Rear (Illustration B ) SYNC switch Use this switch to set the camera synchronization mode—line lock (L.L) or internal (INT). AGC (automatic gain control) ON/OFF switch The automatic gain function automatically adjusts picture gain in accordance with the brightness ...
-
Pelco CC4600 Series - page 8
6 Pelco Manual C1902M (1 1/96) Figure 2 . Rear Panels: CC4600-2/-2X and CC4600-3 3.0 POWER SUPPL Y CONSIDERA TIONS Use only the recommended power supplies. Improper substitutions may damage the camera or cause a shock or fire hazard. CC4600-2/2X • The CC3300-2 must always be operated with a 24 V AC, Class 2 (60 Hz) power supply (not supplied). A ...
-
Pelco CC4600 Series - page 9
Pelco Manual C1902M (1 1/96) 7 Figure 3. T ypical 120 V AC to 24 V AC (60 Hz) Power Supply T ypical P ower Supply T o 24 V AC T er minals On Camera 24 V AC Output Input 120 V AC , 60 Hz • 230 V AC power source: The 24 V AC CC4600-2X and the 230 V AC CC4600-3 must be wired to a 50 Hz source. Figure 4 . T ypical 230 V AC to 24 V AC (50 Hz) Power Su ...
-
Pelco CC4600 Series - page 10
8 Pelco Manual C1902M (1 1/96) Figure 5 . Standard Acceptable Lens Dimensions 4.0 mm Max Thread (0.16" Max.) F or CS Lens 22.4 mm Max. (0.88" Max.) 9.0 mm Max. Thread (0.35" Max) F or C Lens Lens 4.0 LENSES 4.1 LENS LIMITS Lenses exceeding the dimensions shown in Figure 5 below cannot be used. When the lens is not mounted on the came ...
-
Pelco CC4600 Series - page 11
Pelco Manual C1902M (1 1/96) 9 D Auto Iris Plug Pin-out (Back of Plug) 42 1 3 Changing the Plug on an Auto Iris Lens Cable 4.3 LENS INST ALLA TION 4.3.1 Auto Iris Install an auto-iris lens as follows: (Refer to Illustration E ) 1. Unscrew lens mount cap. 2. Screw in the lens. NOTE: When attaching a C-mount type lens, be sure to turn the C/CS adjust ...
-
Pelco CC4600 Series - page 12
10 Pelco Manual C1902M (1 1/96) Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the # the more closed the iris is IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small variations in light levels. Normal ...
-
Pelco CC4600 Series - page 13
Pelco Manual C1902M (1 1/96) 11 LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUTO IRIS A B • T urn Manual Iris ring so iris is fully open and set the Fo- cus ring for ∞ (or dis- tant object). • Adjust Backfocus the same as was done for V ari- able Light conditions ex- cept CCD iris is left in the OFF position; th ...
-
Pelco CC4600 Series - page 14
12 Pelco Manual C1902M (1 1/96) Backfocusing MANUAL IRIS AUTO IRIS A B • Set all other switches on the back of the Camera to the left (deactivated or OFF ), in- cluding the CCD Iris switch. • This step is the same as the one for DC SERVO, excpt that the AUTO IRIS VIDEO/ DC switch is set to VIDEO, both models. CC4600 Series CC3300 Series **With ...
-
Pelco CC4600 Series - page 15
Pelco Manual C1902M (1 1/96) 13 CAUTION: When mounting the lens, loosen the securing nut on the side and turn the focal length adjustment to the C position. Mounting a C- mount lens with the adjustment ring in the CS position may dam- age the optical filter . E 1 3 2 4 5 Fitting the Lens ...
-
Pelco CC4600 Series - page 16
14 Pelco Manual C1902M (1 1/96) 5.0 CAMERA INST ALLA TION A TTENTION: Installation should be per- formed by qualified service personnel only , in accordance with the National Electrical Code or equivalent/applicable local codes. When attaching the camera to a ceiling bracket or tri- pod, attach the supplied mounting bracket. The bracket may be atta ...
-
Pelco CC4600 Series - page 17
Pelco Manual C1902M (1 1/96) 15 G 3 1 2 4 -90 ° 0 ° +90 ° -90 ° 0 ° +90 ° H Phase Adjustment V ertical Phase 5.3 V er tical Phase (Illustration H ) V ertical phase adjustment is NOT vertical ROLL ad- justment. Each camera is adjusted to the AC zero cross- over point at the factory . Problems arise,however , (es- pecially in larger systems) wh ...
-
Pelco CC4600 Series - page 18
16 Pelco Manual C1902M (1 1/96) 7.2 CARE OF THE UNIT • Remove dust or dirt on the surface of the lens or CCD with a blower . • Use a soft, dry cloth to clean the body . If it is very dirty , use a cloth dampened with a small quantity of a neutral detergent, then wipe dry . • A void using volatile solvents such as thinner, al- cohol, benzene a ...
-
Pelco CC4600 Series - page 19
Pelco Manual C1902M (1 1/96) 17 9.0 SPECIFICA TIONS Image Device: 1/3" interline transfer type CCD Effective Picture Elements: CC4600-2: 768 (horizontal) x 494 (vertical) CC4600-2X/ CC4600-3: 752 (horizontal) x 582 (vertical) Lens Mount: C-mount/CS-mount adjustable Signal System: CC4600-2: NTSC/EIA color system CC4600-2X/ CC4600-3: PAL/CCIR co ...
-
Pelco CC4600 Series - page 20
18 P elco Manual C1902M (11/96) 10.0 WARRANTY AND RETURN INFORMA TION PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR ...
Haben Sie eine Frage bezüglich Pelco CC4600 Series?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco CC4600 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco CC4600 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.