Bedienungsanleitung Subaru STi TIMING BELT

19 Seiten 0.74 mb
Download

Zur Seite of 19

Summary
  • Subaru STi TIMING BELT - page 1

    STi TIMING BELT INSTRUCTIONS Thank you for your purchase of SPT Performance Parts. The following instructions have been provided to you as a courtesy of Subaru of America, Inc. Installation instructions are intended only for certified trained automotive technicians or those with the necessary automotive knowledge to properly complete the job. In so ...

  • Subaru STi TIMING BELT - page 2

    1 STi PERFORMAN CE TI MI NG BELT Timing Belt Installation Instructions Remove the serpentine belts A LTERN A TOR / POWER STEERING BELT 1) Remove the belt cover. 2) Loosen the lock bolt (A). 3) Loosen the slider bolt (B). 4) Remove the Alternator / Power Steering belt ( C). A IR CONDITIONING COMPRESSOR BELT 1) Loosen the lock nut (A) . 2) Loosen the ...

  • Subaru STi TIMING BELT - page 3

    2 3) Remove the A/C belt. 4) Remove the A/C belt tensioner. Remove the crankshaft pulle y 1) Remove the crankshaft pulley bolt. To lock crankshaft, use: ST 499977300 CRANKSHAFT PULLEY W RENCH 2) Remove the crankshaft pulley. Remove the timing belt cove r 1) Remove the left-hand belt cover (A). ...

  • Subaru STi TIMING BELT - page 4

    3 2) Remove the right-hand belt cover (B). 3) Remove the front belt cover (C). Remove the timing belt 1) Remove the timing belt guides. (MT vehicle) ...

  • Subaru STi TIMING BELT - page 5

    4 2) If the alignment mark and/or arrow mark (which indicates rotation direction) on timing belt fade away, put new mar ks before removing the timing belt as follows: (A) Turn t he crankshaft using ST 499987500 and alig n alignment marks on crankshaft sprocket, lefthand intake camshaft sprocket, left-hand exhaust camshaft sprocket, right-hand intak ...

  • Subaru STi TIMING BELT - page 6

    5 Z 1 : 54.5 tooth length Z 2 : 51 tooth length Z 3 : 28 tooth length 3) Remove the belt idler (A). ...

  • Subaru STi TIMING BELT - page 7

    6 4) Rem ove the timing belt. CA UT ION: A fter the ti ming belt has been remov ed, never rotate the intake and exhaus t, camshaft sprocket. If the camshaft sprocket is rotated, the intake and exhaust valve heads strike together and valve stems are ben t. Remove the automa t i c b e lt tension a d juster assembly 1 ) Re m o v e t he a u t o m a t i ...

  • Subaru STi TIMING BELT - page 8

    7 Install the automatic belt tens ion ad juster assembly and belt idle r CA UT ION: • A lw ays use a v ertical type pressing tool to move the adjuster rod do wn. • Do n ot u se a latera l ty p e vise. • Push the adjuster rod vert ically. • Be sure to slo wly move the adjuster rod down applying a pressure of 294 N (30 kgf, 66 lb). • Press- ...

  • Subaru STi TIMING BELT - page 9

    8 4) Install the automatic belt tension adjuster assembly. Tightening torque: 39 N·m (4.0 kgf-m, 28.9 ft-lb) ...

  • Subaru STi TIMING BELT - page 10

    9 Install the tim ing belt Crankshaft and camshaft sprocket alignment (1) Align mark (A) on the c rankshaft sprocket with mark on the oil pump cover at cy linder block. (2) Align single line mark (A) on the right-hand exhaust camshaft sproc ket with notch (B) on belt cover. (3) Align single line mark (A) on the right-hand intake camshaft sprocket w ...

  • Subaru STi TIMING BELT - page 11

    10 and exhaust camshaft sprockets are aligned.) (4) Align single line mark (A) on left-hand exhaust camshaft sprocket with notch (B) on bel t cover by tur nin g the sprocket counterclockwise (as viewed from front of en gine). (5) Align single line mark (A) on left-hand intake camshaft sprocket with notch (B) on bel t cover by turning the sprocket c ...

  • Subaru STi TIMING BELT - page 12

    11 engine can be independently rotated with the timing belts removed. A s can be seen from the figure, if the intake and exhaus t valves are lifted simultaneously , their heads will interfere with each other, resulting in bent valves. (A) Intake cam shaft (B) Exhaust ca mshaft • When the timi n g belts are not installed, f our camshafts are held ...

  • Subaru STi TIMING BELT - page 13

    12 intake and exhaust valves to lift simultaneously, resulting in interference with t heir heads. 7) Installat ion of timing belt: Align the alig nment mark on the timing belt with marks on the sprockets in the alphabetical order shown in the figure. W hile aligning marks, position the timing belt properly. CA UT ION: • Dise ngage ment o f mo re ...

  • Subaru STi TIMING BELT - page 14

    13 8) Inst all the belt idler s. Tightening torque: 39 N·m (4.0 kgf-m, 28.9 ft-lb) CA UT ION: Make sure that the marks on the timing belt and sprockets are aligned. 9) After ensuring that the mar ks on the timing belt and sprockets are aligned, remove the stopper pin from tensioner adj uster. 10) Install the timing belt guide. (MT vehicle) (1) Tem ...

  • Subaru STi TIMING BELT - page 15

    14 (11) Tighten t he remaining bolts. Tightening torque: 9.8 N·m (1.0 kgf-m, 7.2 ft-lb) ...

  • Subaru STi TIMING BELT - page 16

    15 Install the tim ing belt cover 1) Install t he front belt cover (C). Tightening torque: 5 N·m (0.5 k gf- m, 3 .6 ft-l b) 2) Install t he right-hand belt cover (B). ...

  • Subaru STi TIMING BELT - page 17

    16 Tightening torque: 5 N·m (0.5 k gf- m, 3 .6 ft-l b) 3) Install the left-hand belt cover (A). Tightening torque: 5 N·m (0.5 k gf- m, 3 .6 ft-l b) Install the crankshaft pu lley 1) Install t he crankshaft pulley. 2) Install t he pulley bolt. To lock the crankshaft, use: ST 499977300 CRANKSHAFT PULLEY W RENCH (3) Clean the crankshaft pulley threa ...

  • Subaru STi TIMING BELT - page 18

    17 CA UT ION: If the tightening angle of crankshaft pu lley bolt is less than 45 degrees, the bolt should be damaged. In this case, the bolt must be replaced. (8) Replace the crankshaft pulley bolts and clean them. Crankshaft pulley bolt: 12369AA011 (9) Clean the crankshaft thread using an air jet. (10) Tig h ten the bolts temporarily w ith tighten ...

  • Subaru STi TIMING BELT - page 19

    18 Tightening torque: Lock bolt through bolt: 25 N·m (2.5 kgf-m, 18 ft-lb) Slider bol t: 8 N·m (0.8 k gf- m, 5 .5 ft-l b) 17) Install t he belt cover. ...

Produzent Subaru Kategorie Automobile Parts

Dokumente, die wir vom Produzenten des Geräts Subaru STi TIMING BELT erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Subaru
- Bedienungsanleitungen STi TIMING BELT
- Produktkarten Subaru
- Informationsbroschüren
- oder Energieetiketten Subaru STi TIMING BELT
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Subaru STi TIMING BELT.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Subaru STi TIMING BELT, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Subaru STi TIMING BELT. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Subaru STi TIMING BELT ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Subaru STi TIMING BELT, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Subaru STi TIMING BELT hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Subaru STi TIMING BELT verständlich ist.

Eine gänzliche Bedienungsanleitung von Subaru sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Subaru STi TIMING BELT bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Subaru STi TIMING BELT befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Subaru STi TIMING BELT, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Subaru STi TIMING BELT - die uns die ersten Schritte während der Nutzung von Subaru STi TIMING BELT erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Subaru STi TIMING BELT hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Subaru STi TIMING BELT im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Subaru STi TIMING BELT?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Subaru STi TIMING BELT nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Subaru STi TIMING BELT hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)