-
Harbor Freight Tools 97005 - page 1
GASOLINE PRESSURE W ASHER 13 HP - 4,000 PSI Model 97005 SET UP , OPERA TING, AND SERVICING INSTRUCTIONS Using an engine indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell. NEVER use inside a home or garage, EVEN IF doors and windows are open. Only use OUTSIDE and far away from windows, ...
-
Harbor Freight Tools 97005 - page 2
Page 2 SKU 97005 For technical questions, please call 1-800-444-3353. T ABLE OF CONTENTS Important Safety Information.....................................................................3 Set-Up Precautions.....................................................................................4 Operating Precautions.................................... ...
-
Harbor Freight Tools 97005 - page 3
Page 3 SKU 97005 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product ha ...
-
Harbor Freight Tools 97005 - page 4
Page 4 SKU 97005 For technical questions, please call 1-800-444-3353. SET UP PRECAUTIONS Gasoline fuel and fumes are 1. ammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other ammable materials nearby . Have multiple ABC class re 2. extinguishers nearby . This equipment may not have a ...
-
Harbor Freight Tools 97005 - page 5
Page 5 SKU 97005 For technical questions, please call 1-800-444-3353. necessary when near the engine’s magneto or recoil starter . Use only accessories that are 6. recommended by Harbor Freight T ools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment. Do not op ...
-
Harbor Freight Tools 97005 - page 6
Page 6 SKU 97005 For technical questions, please call 1-800-444-3353. equipment for a purpose for which it is not intended. Never operate the Pressure W asher 22. using a pulsing action. Pulsing is the repeated and rapid ON and OFF operation of the T rigger . This action could result in the failure of components and connections that are under press ...
-
Harbor Freight Tools 97005 - page 7
Page 7 SKU 97005 For technical questions, please call 1-800-444-3353. Maintain labels and nameplates on 5. the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight T ools for a replacement. Have the equipment serviced by a 6. qualied repair person using only identical replacement parts. This will ensur ...
-
Harbor Freight Tools 97005 - page 8
Page 8 SKU 97005 For technical questions, please call 1-800-444-3353. UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at 1-800-444-3353 as soon as possible. SET UP INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the begi ...
-
Harbor Freight Tools 97005 - page 9
Page 9 SKU 97005 For technical questions, please call 1-800-444-3353. OUTLET CONNECTOR (55) DETERGENT HOSE HOSE (8) INLET CONNECTOR (59) HOSE (8) SPRA Y GUN (6) NOZZLE (9) FIGURE C 4. Attach the Hose (8) to the Spray Gun (6). Connect the other end of the Hose to the Outlet Connector (55). Connect a garden hose to the Inlet Connector (59). Insert th ...
-
Harbor Freight Tools 97005 - page 10
Page 10 SKU 97005 For technical questions, please call 1-800-444-3353. Starting the Engine Inspect engine and equipment looking for damaged, loose, and missing parts before set up and starting. If any problems are found, do not use equipment until xed properly . Checking Engine Oil Level CAUTION! Y our W arranty is VOID if the engine’s Crankca ...
-
Harbor Freight Tools 97005 - page 11
Page 1 1 SKU 97005 For technical questions, please call 1-800-444-3353. Mix fuel stabilizer (not included) with 3. 89 octane (or better) unleaded gaso- line according to fuel stabilizer direc- tions. Fill the Fuel T ank (101) to about 1 4. inch under the lip of the gasoline tank with the stabilized unleaded gasoline mixture. (See Figure I.) Then re ...
-
Harbor Freight Tools 97005 - page 12
Page 12 SKU 97005 For technical questions, please call 1-800-444-3353. Then, turn the engine Choke (41) to 3. its “CHOKE” position. Set the Choke in the “RUN” position when starting a warm engine. (See Figure E.) Grasp the Starter Handle (1), and pull 4. slowly until resistance is felt. While holding the Handle, allow the Starter Rope to re ...
-
Harbor Freight Tools 97005 - page 13
Page 13 SKU 97005 For technical questions, please call 1-800-444-3353. 15° Nozzle (colored yellow): 3. This Nozzle delivers a powerful 15 degree spray pattern for intense cleaning of small areas. This Nozzle should only be used on areas that can withstand the high pressure from this Nozzle. Do not use to clean vehicles. 40° Nozzle (colored white) ...
-
Harbor Freight Tools 97005 - page 14
Page 14 SKU 97005 For technical questions, please call 1-800-444-3353. If damage or discoloration is noted from the detergent, do not use the detergent when cleaning. First, pass over the area with a light 2. cleaning. Then clean the area more thoroughly . For a vertical or sloped surface: 3. W ash from the top down. • If possible, direct the str ...
-
Harbor Freight Tools 97005 - page 15
Page 15 SKU 97005 For technical questions, please call 1-800-444-3353. TECHNICAL SPECIFICA TIONS Engine T ype 13 HP / OHV Recoil Start Air Cooled 3600 RPM Displacement 390cc Rotation viewed from PTO (power takeoff - the output shaft) Counterclockwise (Facing the Shaft) Fuel T ype 89+ octane unleaded gasoline Capacity 1.7 Gallons Engine Oil T ype SA ...
-
Harbor Freight Tools 97005 - page 16
Page 16 SKU 97005 For technical questions, please call 1-800-444-3353. FIGURE K DRAIN PLUG (14) 2. Remove the Drain Plug (14) and, if possible, tilt the Crankcase slightly to help drain the oil out. Recycle used oil. Replace the Drain Plug (14) and 3. tighten it. Rell the oil to the proper level follow - 4. ing the instructions under the “ Sta ...
-
Harbor Freight Tools 97005 - page 17
Page 17 SKU 97005 For technical questions, please call 1-800-444-3353. emery paper . If the white insulator is cracked or chipped, the spark plug needs to be replaced. When installing a new spark plug, ad- 4. just the plug’s gap to the specication on the T echnical specication chart. Do not pry against the electrode, the spark plug can be d ...
-
Harbor Freight Tools 97005 - page 18
Page 18 SKU 97005 For technical questions, please call 1-800-444-3353. TROUBLESHOOTING Problem Possible Causes Probable Solutions Engine will not start FUEL RELA TED: No fuel in tank or fuel valve closed. 1. Choke not in start position, 2. especially with cold engine. Low quality or deteriorated, old 3. gasoline. Carburetor not primed. 4. Dirty fue ...
-
Harbor Freight Tools 97005 - page 19
Page 19 SKU 97005 For technical questions, please call 1-800-444-3353. TROUBLESHOOTING Problem Possible Causes Probable Solutions Engine misres Spark plug wire loose. 1. Incorrect spark plug gap or 2. damaged spark plug. Defective spark plug wire. 3. Old or low quality gasoline. 4. Incorrect compression. 5. Check wire connections. 1. Re-gap or r ...
-
Harbor Freight Tools 97005 - page 20
Page 20 SKU 97005 For technical questions, please call 1-800-444-3353. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIBUTOR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND TO THE BUYER THA T ...
-
Harbor Freight Tools 97005 - page 21
Page 21 SKU 97005 For technical questions, please call 1-800-444-3353. PUMP ASSEMBL Y DIAGRAM 28 27 3 4 1 2 5 6 4 26 1 2 7 8 9 10 11 12 13 4 3 14 15 16 17 18 19 20 21 22 23 24 10 25 44 45 46 47 48 49 36 35 37 38 39 40 41 42 43 50 2 29 30 31 32 33 34 30 31 32 33 34 62 60 59 58 57 61 51 52 53 54 37 56 55 ...
-
Harbor Freight Tools 97005 - page 22
Page 22 SKU 97005 For technical questions, please call 1-800-444-3353. Part Description Qty . 1 Starter Handle 1 2 Flange Bolt (M6 x 8) 3 3 Engine Switch 1 4 Fan Cover 1 5 Flange Bolt (M6 x 12) 12 6 Shroud 1 7 Starter Pulley 1 8 Cooling Fan 1 9 Flange Nut (M16) 1 10 Wire Harness Clip 1 11 Flywheel 1 12 Oil Seal (35 x 52 x 8) 2 13 Crank Case Assy . ...
-
Harbor Freight Tools 97005 - page 23
Page 23 SKU 97005 For technical questions, please call 1-800-444-3353. Part Description Qty . 77 Exhaust Pipe Gasket 1 78 Exhaust Pipe 1 79 Mufer Stay 1 80 Spark Arrester 1 81 Mufer 1 82 Mufer Guard 1 83 T apping Screw (M5 x 8) 5 84 Flange Bolt (M8 x 40) 7 85 Oil Cap 1 86 Crank Case Cover 1 87 Case Cover Packing 1 88 Dowel Pin (8 x 12) 2 8 ...
-
Harbor Freight Tools 97005 - page 24
Page 24 SKU 97005 For technical questions, please call 1-800-444-3353. ENGINE ASSEMBL Y DIAGRAM ...
-
Harbor Freight Tools 97005 - page 25
Page 25 SKU 97005 For technical questions, please call 1-800-444-3353. FRAME, LANCE, HOSE, WHEEL P ARTS LIST & ASSEMBL Y DIAGRAM LANCE, HOSE, WHEEL P ARTS LIST Part Description Qty . 1 Wheel 2 2 Frame 1 3 Hose Shelf 3 4 Gun Shelf 1 5 Screw 3 6 Spray Gun 1 7 Lance 1 8 High Pressure Hose 1 9 Nozzle 4 10 Handle 1 11 Bolt 2 12 Self Locking Nut 2 13 ...
-
Harbor Freight Tools 97005 - page 26
Page 26 SKU 97005 For technical questions, please call 1-800-444-3353. 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the da ...
-
Harbor Freight Tools 97005 - page 27
Page 27 SKU 97005 For technical questions, please call 1-800-444-3353. 4. Coverage Exclusions W arranty claims shall be filed in accordance with the provisions of the HFT warranty policy explained in the box at the top of the previous page. HFT shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods ...
Haben Sie eine Frage bezüglich Harbor Freight Tools 97005?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Harbor Freight Tools 97005 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Harbor Freight Tools 97005 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.