Deutsch dropdown-ico

Bedienungsanleitung Husqvarna 327RD

44 Seiten 2.39 mb
Download

Zur Seite of 44

Summary
  • Husqvarna 327RD - page 1

    E E E E n n n n g g g g l l l l i i i i s s s s h h h h 323RII 327R X-series 327RD X-series Oper ator’ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions before using the machine. ...

  • Husqvarna 327RD - page 2

    KEY T O SYMBOLS 2 – English Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’ s manual. Please read the operator’ s manual carefully and make ...

  • Husqvarna 327RD - page 3

    CONTENTS English – 3 Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control devices and system ma y be performed by any nonroad engine repair establishment or individual. The Emissions Compliance P eriod referred to on the Emission Compliance lab ...

  • Husqvarna 327RD - page 4

    4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of muskets . The location was logical, since w ater power was harn ...

  • Husqvarna 327RD - page 5

    English – 5 WHA T IS WHA T? What is what on the brush cutter? 24 27 26 23 28 18 19 20 1 25 21 4 9 7 30 8 5 3 1 2 4 14 10 17 31 6 16 15 12 13 32 11 22 29 1 Blade 2 Grease filler cap, be vel gear 3 Bev el gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop switch 9 Throttle lock out 10 Suspension 11 Cylinder cov er 12 Sta ...

  • Husqvarna 327RD - page 6

    GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal protective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PRO TECTION Wear hearing protection that provides adequate noise reduction. IMPORT ANT! The machine is only designed for trimming grass , grass clearing and/or forestry clearing. ...

  • Husqvarna 327RD - page 7

    GENERAL SAFETY PRECA UTIONS English – 7 EYE PR O TECTION Alwa ys wear approved e ye protection. If you use a visor then you must also w ear approved protectiv e goggles. Approv ed protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries. GLO VES Glov es should be wor n when necessary , e.g., when fitting cutti ...

  • Husqvarna 327RD - page 8

    GENERAL SAFETY PRECA UTIONS 8 – English Chec k that the throttle control and throttle lock out move freely and that the return spr ings w or k properly . See instructions under the heading Star t. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting ...

  • Husqvarna 327RD - page 9

    GENERAL SAFETY PRECA UTIONS English – 9 Quick release There is an easily accessible, quic k release fitted at the front as a safety precaution in case the engine catches fire, or in any other situation that requires y ou to free yourself from the machine and harness. See instructions under the heading Adjusting the harness and br ush cutter . C ...

  • Husqvarna 327RD - page 10

    GENERAL SAFETY PRECA UTIONS 10 – English Locking n ut A locking nut is used to secure some types of cutting attachment. When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. T o remo ve it, undo the nut in the same direction as the cutting attachment rotates. (CA UTION! The nut has a left ...

  • Husqvarna 327RD - page 11

    GENERAL SAFETY PRECA UTIONS English – 11 General rules Only use cutting attachments with the guards we recommend! See the chapter on T echnical data. K eep the teeth of the blade correctly shar pened! F ollow our instructions and use the recommended file gauge. An incorrectly sharpened or damaged blade increases the risk of accidents. K eep the ...

  • Husqvarna 327RD - page 12

    GENERAL SAFETY PRECA UTIONS 12 – English round file. The top edges must be filed down by the same amount for all the teeth. Adjust the blade setting. This should be 1 mm. T rimmer head • Only use the recommended trimmer heads and trimmer cords. These have been tested b y the manuf acturer to suit a par ticular engine size. This is especially ...

  • Husqvarna 327RD - page 13

    ASSEMBL Y English – 13 Fitting the handlebar (323RII) • Remov e the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar , (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar . • Refit the screw in the hole in the rear of the throttle handle. ? ...

  • Husqvarna 327RD - page 14

    ASSEMBL Y 14 – English • P osition the handlebar as shown. Fit the mounting components and tighten the knob lightly . • Put on the harness and hang the machine from the suppor t hook. No w make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness. Tighten the knob . Assembling and dismant ...

  • Husqvarna 327RD - page 15

    ASSEMBL Y English – 15 Assembling the cutting equipment Fitting a blade guar d, grass b lade and grass cutter • Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CA UTION! Use the recommended blade guard. See the T echnical data section. • Fit the drive disc (B) on the output shaft. • T urn ...

  • Husqvarna 327RD - page 16

    ASSEMBL Y 16 – English CA UTION! Use the recommended blade guard. See the T echnical data section. • Fit the drive disc (B) on the output shaft. • T urn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing. • Inser t the loc king pin (C) in the hole to lock the shaft. • Place the ...

  • Husqvarna 327RD - page 17

    ASSEMBL Y English – 17 Adjusting the harness and brush cutter Standard harness Quick release At the front is an easily accessible, quic k release. Use this if the engine catches fire or in any other emergency situation that requires you to free y ourself from the machine and harness. Spreading the load on y our shoulders A well-adjusted harness ...

  • Husqvarna 327RD - page 18

    FUEL HANDLING 18 – English Fuel safety Nev er star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha ve spilled fuel on yourself or y our clothes, change your clothes. W ash any par t of y our body that has come in contact with fuel. Use soap and water . 3 If the machine is ...

  • Husqvarna 327RD - page 19

    FUEL HANDLING English – 19 Mixing • Alwa ys mix the gasoline and oil in a clean container intended for fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore fillin ...

  • Husqvarna 327RD - page 20

    ST AR TING AND ST OPPING 20 – English Check bef ore star ting • Check the b lade to ensure that no cracks hav e formed at the bottom of the teeth or by the centre hole. The most common reason why cr acks are formed is that sharp cor ners have been f or med at the bottom of the teeth while sharpening or that the blade has been used with dull tee ...

  • Husqvarna 327RD - page 21

    ST AR TING AND ST OPPING English – 21 Choke: Set the choke control in the chok e position. Hold the body of the machine on the ground using your left hand (CA UTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with y our right hand until you f eel some resistance (the star ter pawls grip), now quickly and pow erfully p ...

  • Husqvarna 327RD - page 22

    W ORKING TECHNIQ UES 22 – English General working instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot affect y our control of the machine. • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting att ...

  • Husqvarna 327RD - page 23

    W ORKING TECHNIQ UES English – 23 W orking methods • Before y ou star t clear ing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc. • Star t at whichev er end of the area is easiest, and clear an open space from which to work. • Work systematically to and fro across the area, clea ...

  • Husqvarna 327RD - page 24

    W ORKING TECHNIQ UES 24 – English • T o fell to the left, the bottom of the tree should be pushed to the right. Tilt the b lade and br ing it diagonally down to the right, ex er ting fir m pressure. At the same time push the stem using the blade guard. Cut with the area of the blade between 3 o’cloc k and 5 o’clock. Apply full throttle bef ...

  • Husqvarna 327RD - page 25

    W ORKING TECHNIQ UES English – 25 Grass clearing using a grass b lade • Grass blades and g rass cutters must not be used on woody stems. • A grass b lade is used for all types of tall or coarse grass. • The grass is cut down with a side ways , swinging mov ement, where the movement from right-to-left is the clearing stroke and the mov ement ...

  • Husqvarna 327RD - page 26

    MAINTENANCE 26 – English Carburetor Y our Husqvarna product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, as ...

  • Husqvarna 327RD - page 27

    MAINTENANCE English – 27 3 If the star t throttle speed is too low (below 4000 rpm), turn the adjuster screw A clockwise until the cutting attachment star ts to rotate. Then tur n A clockwise a fur ther 1/2 turn. 4 If the star t throttle speed is too high, turn the adjuster screw A anticloc kwise until the cutting attachment stops. Then tur n adj ...

  • Husqvarna 327RD - page 28

    MAINTENANCE 28 – English 4 Cylinder cov er (directs cold air over the cylinder). Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine ov erheating which causes damage to the piston and cylinder . Be vel gear The bev el gear is filled with the right quantit ...

  • Husqvarna 327RD - page 29

    MAINTENANCE English – 29 Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dir ty air filter . These factors cause deposits on the spark plug electrodes, which ma y result in operating problems and star ting difficulties. If the ma ...

  • Husqvarna 327RD - page 30

    30 – English MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this manual. More extensiv e work must be carried out by an authorized service wor ...

  • Husqvarna 327RD - page 31

    English – 31 TECHNICAL D A T A T ec hnical data Note 1: Repor ted data for equivalent sound pressure le vel f or the machine has a typical statistical dispersion (standard deviation) of 1 dB (A). Note 2: Repor ted data for equivalent vibr ation level has a typical statistical dispersion (standard de viation) of 1 m/s 2 . T echnical data 323RII 32 ...

  • Husqvarna 327RD - page 32

    32 – English TECHNICAL D A T A Appro ved accessories T ype Cutting attachment guard, Art. no. Centre hole in blades/cutters, Ø 25,4 mm Arbor shaft thread M10 Grass blade/g rass cutter Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02 Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02 Saw b lade Scarlet 200-22 1" (Ø 200 22 teeth) 537 02 21-0 ...

  • Husqvarna 327RD - page 33

    FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT English – 33 Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (U.S . Environmental Protection Agency), CARB (California Air Resources Board), Environment Canada and Husqvarna Forest & Garden are pleased to e xplain the emissions control system’ s warranty on your 2009 and later ...

  • Husqvarna 327RD - page 34

    FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT 34 – English EMISSION W ARRANTY P ARTS LIST 1 Carburetor and internal par ts 2 Intake pipe, airfilter holder and carb uretor bolts. 3 Airfilter and fuelfilter cov ered up to maintenance schedule. 4 Spark Plug, covered up to maintenance schedule 5 Ignition Module 6 Muffler with ca ...

  • Husqvarna 327RD - page 35

    ...

  • Husqvarna 327RD - page 36

    "Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35 ...

  • Husqvarna 327RD - page 37

    1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5 ...

  • Husqvarna 327RD - page 38

    T35, T35x "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm ...

  • Husqvarna 327RD - page 39

    "Clic" 1 2 3 5 6 7 9 6,0 m 18' 4 8 3,05 m 9' 2,0-2,4 mm .079-.095" 10 cm 4" 6" 15 cm T25 ...

  • Husqvarna 327RD - page 40

    ...

  • Husqvarna 327RD - page 41

    ...

  • Husqvarna 327RD - page 42

    ...

  • Husqvarna 327RD - page 43

    ...

  • Husqvarna 327RD - page 44

    1153290-95 ´®z+U=)¶5S¨ ´®z+U=)¶5S¨ 2010-02-22 Original instructions ...

Produzent Husqvarna Kategorie Trimmer

Dokumente, die wir vom Produzenten des Geräts Husqvarna 327RD erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Husqvarna
- Bedienungsanleitungen 327RD
- Produktkarten Husqvarna
- Informationsbroschüren
- oder Energieetiketten Husqvarna 327RD
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Husqvarna 327RD.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Husqvarna 327RD, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Husqvarna 327RD. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Husqvarna 327RD ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Husqvarna 327RD, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Husqvarna 327RD hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Husqvarna 327RD verständlich ist.

Eine gänzliche Bedienungsanleitung von Husqvarna sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Husqvarna 327RD bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Husqvarna 327RD befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Husqvarna 327RD, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Husqvarna 327RD - die uns die ersten Schritte während der Nutzung von Husqvarna 327RD erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Husqvarna 327RD hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Husqvarna 327RD im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Husqvarna 327RD?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Husqvarna 327RD nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Husqvarna 327RD hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)