-
Roland Fantom G7 - page 1
04905089 08-02-1N * 04905089 - 01 * ...
-
Roland Fantom G7 - page 2
...
-
Roland Fantom G7 - page 3
3 Contents Using the Fantom-G Live ....................... 5 The Basics of Using the Fantom-G Live ......................................................................... 6 Performing on the Keyboard ..................................................... 9 Selecting and Playing a Single Sound (Patch) ............................................... ...
-
Roland Fantom G7 - page 4
4 This Quick Guide applies to the Fantom-G6, the Fantom-G7 and the Fantom-G8. The manual uses the term “Fantom-G” to indicate all these three models. The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the syst ...
-
Roland Fantom G7 - page 5
Using the Fantom-G Live Fantom-G_q_e.book 5 ページ ２００８年２月４日 月曜日 午後２時２６分 ...
-
Roland Fantom G7 - page 6
6 The Basics of Using the Fantom-G Live A patch is a basic sound on the Fantom-G; it corresponds to an individual instrument such as a piano, organ, or guitar. When you play the Fantom-G for the first time, we recommend that you use it in Single mode . This is the simplest and most basic mode in which the Fantom-G can be used, such as playing it as ...
-
Roland Fantom G7 - page 7
7 The Basics of Using the Fantom-G Live Studio mode is what you’ll use to create songs. It provides sixteen parts, and you can assign a patch to each part to handle sixteen different sounds simultaneously. You can use the mixer screen to mix your song by adjusting the level and pan settings etc. for each of the sixteen parts. The advantage of Stu ...
-
Roland Fantom G7 - page 8
8 The Basics of Using the Fantom-G Live When you’ve created an original patch, you need to save it as a user patch if you want to use it again later. This action is called “Writing.” The procedure for writing your original patch into memory is shown below. If you select a different patch before writing your original patch, the changes you mad ...
-
Roland Fantom G7 - page 9
Performing on the Keyboard Fantom-G_q_e.book 9 ページ ２００８年２月４日 月曜日 午後２時２６分 ...
-
Roland Fantom G7 - page 10
10 Selecting and Playing a Single Sound (Patch) Here’s how to view a single category of sounds (such as only the piano patches or only the organ patches), and select one of them. 1. Press the [SINGLE] button. fig.0-01 2. Press [F1 (Patch List)] to access the Patch List screen. fig.0-03 3. Use [F1] [F2] to select a category (of sounds such as pian ...
-
Roland Fantom G7 - page 11
11 Playing Two or More Sounds Simultaneously (Layer/Split) You can play two or more patches at the same time, for example a piano and bell that sound simultaneously when you press a key. This is called a Layer . You can also play separate sounds in the left and right regions of the keyboard. For example you might play a bass sound with your left ha ...
-
Roland Fantom G7 - page 12
12 Playing Two or More Sounds Simultaneously (Layer/Split) 1. In the Live Play (Layer/Split) screen, press [F2 (Utility)], and then press [F6 (Initialize)]. 2. Use / to choose “Default.” 3. Press [F8 (Select)]. A confirmation message appears. 4. Press [F7 (OK)] to execute initialization. 5. Press [F8 (Exit)] to return to the previous screen. 1. ...
-
Roland Fantom G7 - page 13
13 Playing Two or More Sounds Simultaneously (Layer/Split) In the Live Play (Layer/Split) screen, we can specify the key range for each part. 1. In the Live Play (Layer/Split) screen, use the cursor buttons to move the cursor to the “Lower” setting of part 2. 2. Specify the key range. Turn the VALUE dial to specify the value. fig.0-05b_e You ca ...
-
Roland Fantom G7 - page 14
14 Creating a Set of Sounds for a Live Performance You can create a list of the patches, live sets, studio sets, and songs that you frequently use, and place these in the order in which they’ll be used in your live show so that the sounds you need can be selected instantly. This capability is called the Favorite function . For example, you could ...
-
Roland Fantom G7 - page 15
Performing on the Pads Fantom-G_q_e.book 15 ページ ２００８年２月４日 月曜日 午後２時２６分 ...
-
Roland Fantom G7 - page 16
16 Pad Basics You can play samples, rhythms, or phrases by striking the Fantom-G’s pads, or you can use them as sixteen switches to turn various parameters on/off. The pads can function in one of sixteen modes. Press [PAD MODE] to switch the pad mode. 1. Press [PAD MODE]. [PAD MODE] will blink, and the currently selected pad mode (pad [1]–[16]) ...
-
Roland Fantom G7 - page 17
17 Using the Pads to Play Rhythm Sounds The pads are an ideal way to play rhythm sounds. You can vary the dynamics of the sound by changing the force of your strikes on the pads. 1. Press [PAD MODE], and then press pad [2] (RHYTHM). 2. When you press a pad [1]–[16], you’ll hear a rhythm tone. 1. Press [PAD SETTING]. 2. Use the cursor buttons to ...
-
Roland Fantom G7 - page 18
18 Using the Pads to Play Rhythm Sounds You can adjust the way in which the force of your pad strike corresponds to the volume. Press [PAD SETTING] ➝ [F1 (System)] to access the setting screen, and set “Pad Sens” as desired. If you want to keep your settings, press [F7 (Sys Write)]. For some sounds, you might prefer that the volume not change ...
-
Roland Fantom G7 - page 19
19 Using the Pads to Play Sampled Sounds Sounds (samples) you’ve captured by sampling can be quickly and easily played from the pads. You can sample brief “shots” and play them as percussion instruments. You can also sample entire phrases and play them back at a single touch. 1. Press [PAD MODE], and then press pad [1] (SAMPLE PAD). 2. Press ...
-
Roland Fantom G7 - page 20
20 Using the Pads to Play Sampled Sounds The Fantom-G can import WAV/AIFF format audio files from your computer, and play them as samples. Here we’ll explain how to import audio files via USB memory (sold separately). Even if you don’t have USB memory, you can copy audio files to the Fantom-G’s internal memory. 1. On your computer, prepare th ...
-
Roland Fantom G7 - page 21
21 Using the Pads to Play Sequenced Phrases (RPS) You can use the pads to play sequenced phrases you’ve created. This is called the RPS (Realtime Phrase Sequence) function . For example, simply by specifying that pad number 2 will play phrase number 0005, you can press that pad to play the assigned phrase. 1. Press [PAD MODE], and then press pad ...
-
Roland Fantom G7 - page 22
22 Using the Pads to Play Sequenced Phrases (RPS) 1. Use the sequencer to record a phrase. ➝ Owner’s Manual “Recording into a Phrase” (p. 220) 2. Save the phrase. ➝ Owner’s Manual “Saving a Phrase (Save)” (p. 216) 3. Select the phrases played by each pad. ➝ This manual “Selecting a phrase” (p. 21) Phrases will play at the same ...
-
Roland Fantom G7 - page 23
Creating a Song Fantom-G_q_e.book 23 ページ ２００８年２月４日 月曜日 午後２時２６分 ...
-
Roland Fantom G7 - page 24
24 What is the Sequencer? The sequencer allows you to create a song by recording your performance on the keyboard or pads, or by recording audio sources such as a mic or guitar connected to the Fantom-G’s input jacks, and then play back the song you’ve created. The Fantom-G’s sequencer can record MIDI and audio. MIDI (phrases) MIDI records yo ...
-
Roland Fantom G7 - page 25
25 What is the Sequencer? Terminology Song On the Fantom-G, “song” refers to a composition you created using the sequencer, and includes the performance data and the sound generator settings all saved together. This means that a song contains all the material for that composition. When you’ve completed your composition, you should save the so ...
-
Roland Fantom G7 - page 26
26 Getting Your Equipment Together In order to take full advantage of the Fantom-G’s audio recording capability, you’ll need to expand the memory. By installing expansion DIMM memory you’ll be able to record extended lengths of audio. USB memory will allow you to save the important data you’ve recorded. The audio you record from a guitar or ...
-
Roland Fantom G7 - page 27
27 Work Flow for Creating a Song The general work flow for creating a song is shown below. This manual will explain the process in this order. 1. In the song list, select an empty song (p. 28) 2. In the studio set, select the sounds you’ll use for recording (p. 28) 3. Specify the time signature of the song (p. 30) 4. Specify the tempo of the song ...
-
Roland Fantom G7 - page 28
28 Preparations for Song Production Here’s how to prepare the sequencer and sound generator for creating a song. When the Fantom-G starts up, it will load song 001 from the song list, and with the factory settings song number 001 contains a demo song. If you’re creating a new song, select an empty song from the song list. 1. Press [SONG]. The S ...
-
Roland Fantom G7 - page 29
29 Preparations for Song Production 3. Turn the VALUE dial or use [DEC] [INC] to choose “PRST 007: Rock Studio Set.” After you’ve selected a studio set, press [F8 (Select)] to confirm your choice. “PRST 007: Rock Studio Set” is a studio set that has suitable sounds and effect settings prepared beforehand to make a rock song. 1. Select a p ...
-
Roland Fantom G7 - page 30
30 Preparations for Song Production When recording a new song, you’ll need to specify the time signature. However, after you’ve executed Song Clear or turned the power on, the time signature will always be set to 4/4, so you’ll need to change this only if your new song uses a time signature that’s different than this. In this example we’l ...
-
Roland Fantom G7 - page 31
31 Realtime-recording the Rhythm Using MIDI Now let’s use MIDI to realtime-record the rhythm part. The pads are a suitable way to record a percussion instrument performance. Realtime recording is the method in which your performance is recorded exactly as you strike the pads. 1. Press [PAD MODE] and then press pad [2] (RHYTHM). 2. When you press ...
-
Roland Fantom G7 - page 32
32 Realtime-recording the Rhythm Using MIDI Next you’ll select the MIDI track on which to record, and specify the recording-start measure. You can record on any track 1–128 that is indicated as “MIDI.” There’s no particular need to record on track 10 just because you’re playing part 10 of the sound generator part. In this example, let? ...
-
Roland Fantom G7 - page 33
33 Realtime-recording the Rhythm Using MIDI 1. Press the [REC] button to enter the record-standby condition. The [REC] indicator will blink, and the Realtime Rec Standby window appears. 2. Use the cursor buttons to move the cursor to each parameter, and turn the VALUE dial or use [INC] [DEC] to make settings. Here we’ll explain how to loop-record ...
-
Roland Fantom G7 - page 34
34 Realtime-recording the Rhythm Using MIDI As an alternative to realtime recording, you can enter performance data one note at a time as though you were writing notes onto musical staff paper. This method is called “step recording.” This allows you to create phrases deliberately. For details, refer to “Inputting Data One Step at a Time (Step ...
-
Roland Fantom G7 - page 35
35 Realtime-recording the Bass and Piano as MIDI Now that we’ve recorded the bass and piano, let’s record the other parts. The process is the same as when you recorded the rhythm; the only difference is that we’ll use the keyboard instead of the pads. Select a part in the Studio Play screen, select a track in the Song Play screen, and then re ...
-
Roland Fantom G7 - page 36
36 Importing Audio Files from Your Computer The Fantom-G can import audio files (WAV or AIFF format) from your computer and use them as samples. You can also create a song simply by placing these samples in an audio track. Audio files can be imported into the Fantom-G. For the procedure, refer to “Importing sounds (samples) from your computer” ...
-
Roland Fantom G7 - page 37
37 Importing Audio Files from Your Computer 1. Press [SONG] twice to access the Song Edit screen Each time you press [SONG], you’ll switch between the Song Play screen and Song Edit screen. 2. Use / to select the audio track in which you want to place a sample. You can place samples in any track 1–24 that indicates AUDIO. For this example, sele ...
-
Roland Fantom G7 - page 38
38 Recording Sound from a Mic or Guitar Here’s how to record from a mic or guitar connected to the Fantom-G. Connect your mic, guitar, or portable audio player as shown below. Connecting your equipment Connecting a mic Connecting a guitar or bass Connecting a portable audio player When using a condenser mic that requires a balanced (XLR) connecti ...
-
Roland Fantom G7 - page 39
39 Recording Sound from a Mic or Guitar Select the audio track on which you want to record, and specify the recording-start measure. You can record on any track 1–24 that’s marked “AUDIO.” For this example let’s record on audio track 2. 1. Press [SONG]. The Song Play screen appears. 2. Turn the VALUE dial or use / to select an audio track ...
-
Roland Fantom G7 - page 40
40 Recording Sound from a Mic or Guitar 1. Press the [REC] button to enter record-standby mode. The [REC] indicator will blink, and the Audio Rec Standby window appears. You can apply effects such as equalizer or compressor to the audio input. To make settings, press [F7 (Inp Setting)] and then [F7 (Input Effect)] to access the INPUT EFFECT screen. ...
-
Roland Fantom G7 - page 41
41 Using Song Edit to Arrange Samples or Phrases You can edit your song by moving or copying samples and phrases. 1. Press [SONG] twice to access the Song Edit screen Each time you press the [SONG] button, you’ll switch between the Song Play screen and Song Edit screen. You can change the location at which a sample/phrase plays back, or move it t ...
-
Roland Fantom G7 - page 42
42 Adjusting the Overall Balance When you’ve finished recording, you’ll want to adjust the balance between the various parts. The process of adjusting the overall sound and clarifying the parts you want to emphasize is called “mixing.” Press [STUDIO] to access the Studio Play screen (mixer), and adjust the various settings. In the Studio Pl ...
-
Roland Fantom G7 - page 43
43 Mastering Mastering is the final state of song production, in which you apply a compressor and equalizer to add the final touches to the song. If your completed song is lacking in overall power, or if it sounds quite different when played back in a different environment, you should pay attention to the adjustments of the mastering process. 1. Pr ...
-
Roland Fantom G7 - page 44
44 Saving Your Song The song you created will disappear if you turn off the power. Save it as follows. To save phrases individually ➝ “Saving a Phrase (Save)” (p. 216) in the Owner’s Manual To save samples individually ➝ “Saving a Sample (Save)” (p. 274) in the Owner’s Manual 1. In the Song Play screen or Song Edit screen, press [WR ...
-
Roland Fantom G7 - page 45
45 Making a CD from Your Completed Song The Fantom-G provides a “Resampling” function that renders all of the audio tracks and MIDI tracks in your song into a single sample. The samples created by this resampling function can be copied to your computer as WAV files, and used by your computer to create a CD. Here’s how to combine all audio tra ...
-
Roland Fantom G7 - page 46
46 Making a CD from Your Completed Song After resampling, you can copy the resulting sample to your computer. The sample is a WAV file, so you can use it to create a CD on your computer. 1. Verify the number of the sample you created by resampling (In this example we’ll assume it is 0001). 2. Use a USB cable (sold separately) to connect the Fanto ...
-
Roland Fantom G7 - page 47
...
-
Roland Fantom G7 - page 48
04905089 08-02-1N * 04905089 - 01 * ...
Haben Sie eine Frage bezüglich Roland Fantom G7?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Roland Fantom G7 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Roland Fantom G7 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.