Deutsch dropdown-ico

Bedienungsanleitung Axis Communications P1427E

60 Seiten 1.19 mb
Download

Zur Seite of 60

Summary
  • Axis Communications P1427E - page 1

    AXIS P1427–E Network Camera User Manual ...

  • Axis Communications P1427E - page 2

    About this Document This manual is intended for administrators and users of the AXIS P1427-E Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syst ...

  • Axis Communications P1427E - page 3

    Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RT C). Under normal conditions this battery will last for a minimum of ve years. Low battery power affects the operation of the RT C, causing it to reset at every power-up. When the battery needs replacing, a log message will app ...

  • Axis Communications P1427E - page 4

    AXIS P1427–E Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications P1427E - page 5

    AXIS P1427–E Network Camera T able of Contents P erformance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5 ...

  • Axis Communications P1427E - page 6

    AXIS P1427–E Network Camera Hardware Overview Hardware Overview 2 3 4 5 1 6 1 microSD card slot 2 I/O connector 3 Control button 4 Network connector 5 Status LED indicator 6 P art number (P/N) & Serial number (S/N) Connectors and Buttons For technical specications, see page 56 . Network Connector RJ45 Ethernet connector with P ower over Et ...

  • Axis Communications P1427E - page 7

    AXIS P1427–E Network Camera Hardware Overview SD Card Slot A microSD card (not included) can be used for local recording with removable storage. For more information, see T echnical Specications on page 56 . NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should be unmounted before removal. T o unmount, go to Setup > ...

  • Axis Communications P1427E - page 8

    AXIS P1427–E Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating system ...

  • Axis Communications P1427E - page 9

    AXIS P1427–E Network Camera Accessing the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 5 1 . To set the password via a standard HTTP connection, enter it directly in the ...

  • Axis Communications P1427E - page 10

    AXIS P1427–E Network Camera Accessing the Product Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and congure output buttons, see page 25 . The Manual T rigger button is used to trigger an action rule from the Live View page. For information about how to con? ...

  • Axis Communications P1427E - page 11

    AXIS P1427–E Network Camera Accessing the Product Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view . The Record button is used to record the current video stream. The location where the recording is saved can be specied in the AMC Control ...

  • Axis Communications P1427E - page 12

    AXIS P1427–E Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applic ...

  • Axis Communications P1427E - page 13

    AXIS P1427–E Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P anel ...

  • Axis Communications P1427E - page 14

    AXIS P1427–E Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 14 ...

  • Axis Communications P1427E - page 15

    AXIS P1427–E Network Camera Setting Up the Product Setting Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access t ...

  • Axis Communications P1427E - page 16

    AXIS P1427–E Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 16 . • Stream proles. See page 17 . • Camera settings. See page 18 . • View areas. See page 20 . • Overlay image. See page 2 1 . • Privacy mask. See page 23 . • Focus and zoom. See page ...

  • Axis Communications P1427E - page 17

    AXIS P1427–E Network Camera Video • Overlay settings . See Overlay on page 2 1 . Click Save to apply the new settings. H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-fram ...

  • Axis Communications P1427E - page 18

    AXIS P1427–E Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Capture Mode Capture mode denes the maximum resolution and maximum frame rate available in the Axis product. A capture mode with a large maximum resolution has a reduced maximum frame rate and v ...

  • Axis Communications P1427E - page 19

    AXIS P1427–E Network Camera Video White Balance White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color . Alternatively , select the type of light source from the drop-down list. Fo ...

  • Axis Communications P1427E - page 20

    AXIS P1427–E Network Camera Video Consider an area where people or vehicles move during the day , but where there should be no movements during night. To be able to, for example, recognize faces or license plates, move the normal light priority slider toward low motion blur . At nighttime, motion detection is more important than identication. ...

  • Axis Communications P1427E - page 21

    AXIS P1427–E Network Camera Video Note The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specic part of the full view . Overlay Overlays are used to provide extra information, for example for forensic video analysis or during product installation and conguration. Overlays are superimposed ...

  • Axis Communications P1427E - page 22

    AXIS P1427–E Network Camera Video - To scale the image automatically , select Scale with resolution . The image will be scaled down to t the resolution used by the Axis product. 5. Click Save . To select the image to use as overlay: 1. Go to Video > Overlay Image . 2. Select the image to use from the Use overlay image list and click Save . ...

  • Axis Communications P1427E - page 23

    AXIS P1427–E Network Camera Video Privacy Mask A privacy mask is a user-dened area that prevent users from viewing parts of the monitored area. Privacy masks appear as blocks of solid color and are applied on the video stream. Privacy masks cannot be bypassed using the VAPIX® application programming interface (API). The Privacy Mask List ( Vi ...

  • Axis Communications P1427E - page 24

    AXIS P1427–E Network Camera Live View Config Live View Config Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 17 . • Default Viewer for Browser . See page 24 . • Viewer Settings. See page 24 . • Action Button ...

  • Axis Communications P1427E - page 25

    AXIS P1427–E Network Camera Live View Config • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the loca ...

  • Axis Communications P1427E - page 26

    AXIS P1427–E Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 20 . Preset P ositions A preset position is a predened view that can be used to quickly steer the camera to a specic ...

  • Axis Communications P1427E - page 27

    AXIS P1427–E Network Camera PTZ (Pan Tilt Zoom) For more information see the online help . Advanced Controls P anel Shortcut Command Buttons can be congured to provide direct access to commands issued via the VAPIX® Application Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View p ...

  • Axis Communications P1427E - page 28

    AXIS P1427–E Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. T o send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T ampering . 2. S ...

  • Axis Communications P1427E - page 29

    AXIS P1427–E Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detect ...

  • Axis Communications P1427E - page 30

    AXIS P1427–E Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high histor ...

  • Axis Communications P1427E - page 31

    AXIS P1427–E Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, down ...

  • Axis Communications P1427E - page 32

    AXIS P1427–E Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 32 ...

  • Axis Communications P1427E - page 33

    AXIS P1427–E Network Camera Events Events The Axis product can be congured to perform actions when different events occur , for example, start a recording when motion is detected. The set of conditions that denes how and when the action is triggered is called an Action Rule . Available action rule triggers and conditions include: • Applic ...

  • Axis Communications P1427E - page 34

    AXIS P1427–E Network Camera Events - System Ready – T rigger the rule when the product has been started and all services are running. This can for example be used to send a notication when the product restarts. • Time - Recurrence – Trigger the rule periodically . See Recurrences on page 36 . This can for example be used to upload an ima ...

  • Axis Communications P1427E - page 35

    AXIS P1427–E Network Camera Events 9. Optionally , select the Fallback action option to, for example, send an email notication if the recording does not start. See Fallback Action on page 35 . To use more than one trigger for the action rule, select Additional conditions and click Add to add additional triggers. When using additional condition ...

  • Axis Communications P1427E - page 36

    AXIS P1427–E Network Camera Events 3. Select a recipient T ype . 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to the recipient. 6. Click OK . Setting Up an Email Recipient Email recipients can be congured by selecting one of the listed email providers, or by specifying the SMTP server , port and ...

  • Axis Communications P1427E - page 37

    AXIS P1427–E Network Camera Events 3. Click OK . To use the recurrence in an action rule, rst select Time from the T rigger drop-down list in the Action Rule Setup page and then select the recurrence from the second drop-down list. To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove . 37 ...

  • Axis Communications P1427E - page 38

    AXIS P1427–E Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 38 . • To set up action rules, see page 34 . • To access recordings, see Recording List on page 38 . • To congure camera controlled storage, see S ...

  • Axis Communications P1427E - page 39

    AXIS P1427–E Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Se ...

  • Axis Communications P1427E - page 40

    AXIS P1427–E Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may ...

  • Axis Communications P1427E - page 41

    AXIS P1427–E Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired ...

  • Axis Communications P1427E - page 42

    AXIS P1427–E Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. 2. Go to Se ...

  • Axis Communications P1427E - page 43

    AXIS P1427–E Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > T CP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network adminis ...

  • Axis Communications P1427E - page 44

    AXIS P1427–E Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign a ...

  • Axis Communications P1427E - page 45

    AXIS P1427–E Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server . To ...

  • Axis Communications P1427E - page 46

    AXIS P1427–E Network Camera System Options Use manually selected NAT router - Select this option to manually select a NA T router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected. A ...

  • Axis Communications P1427E - page 47

    AXIS P1427–E Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T rap community th ...

  • Axis Communications P1427E - page 48

    AXIS P1427–E Network Camera System Options • ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required. • vFAT — supported by most operating systems for persona ...

  • Axis Communications P1427E - page 49

    AXIS P1427–E Network Camera System Options P orts & Devices I/O P orts The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 58 . The I/O ports are congured under System Options > P orts & Devices > I/O P orts ...

  • Axis Communications P1427E - page 50

    AXIS P1427–E Network Camera System Options System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes rmware version, IP address, network and security settings, event settings, image settings and recent log items. Many of t ...

  • Axis Communications P1427E - page 51

    AXIS P1427–E Network Camera System Options Plain Cong Plain Cong is for advanced users with experience of Axis product conguration. Most parameters can be set and modied from this page. To open Plain Cong, go to System Options > Advanced > Plain Cong . Axis Support does not provide assistance. Reset to Factory Default Sett ...

  • Axis Communications P1427E - page 52

    AXIS P1427–E Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. Th ...

  • Axis Communications P1427E - page 53

    AXIS P1427–E Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the ins ...

  • Axis Communications P1427E - page 54

    AXIS P1427–E Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Chec ...

  • Axis Communications P1427E - page 55

    AXIS P1427–E Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . T o identify the source of the problem, check the System Log under System Options > Support > Logs & R ...

  • Axis Communications P1427E - page 56

    AXIS P1427–E Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P1427–E Image sensor 1/3.2” progressive scan CMOS Lens f=2.8-9.8 mm F1.6 Autofocus Automatic day and night functionality Horizontal angle of view: 27° - 92° V ertical angle of view: 20° - 68° Diagonal angle of ...

  • Axis Communications P1427E - page 57

    AXIS P1427–E Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications available at www .axis.com AXIS Video Hosting System (A VHS) with One-Click Camera Connecti ...

  • Axis Communications P1427E - page 58

    AXIS P1427–E Network Camera T echnical Specifications Function/group Item Specications Video management software AXIS Camera Companion (software included on CD) — Basic surveillance for small businesses, where video is recorded to edge storage. AXIS Camera Station (sold separately) — Fully featured surveillance for medium-sized installati ...

  • Axis Communications P1427E - page 59

    AXIS P1427–E Network Camera T echnical Specifications 12 V max 15 m A 1 2 3 4 SD Card Slot Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 1 0. P erformance Considerations When setting up your system, it is important to consider how various settings and situat ...

  • Axis Communications P1427E - page 60

    User Manual V er . M1.6 AXIS P1427–E Network Camera Date: August 20 14 © Axis Communications AB, 20 14 P art No. 57483 ...

Produzent Axis Communications Kategorie Security Camera

Dokumente, die wir vom Produzenten des Geräts Axis Communications P1427E erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Axis Communications
- Bedienungsanleitungen P1427E
- Produktkarten Axis Communications
- Informationsbroschüren
- oder Energieetiketten Axis Communications P1427E
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Axis Communications P1427E.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Axis Communications P1427E, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Axis Communications P1427E. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Axis Communications P1427E ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Axis Communications P1427E, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Axis Communications P1427E hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Axis Communications P1427E verständlich ist.

Eine gänzliche Bedienungsanleitung von Axis Communications sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Axis Communications P1427E bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Axis Communications P1427E befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Axis Communications P1427E, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Axis Communications P1427E - die uns die ersten Schritte während der Nutzung von Axis Communications P1427E erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Axis Communications P1427E hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Axis Communications P1427E im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Axis Communications P1427E?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Axis Communications P1427E nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Axis Communications P1427E hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)