-
Snapper ELT145H33GBV - page 1
Safety Instructions & Operator’s Manual for EUROPEAN LAWN TRACTOR HYDROSTATIC DRIVE SERIES G MODELS HYDROSTATIC DRIVE ELT145H33GBV MODEL NUM BER EXPLA NA T ION E LT 145 H 33 G B V EUROPEA N MO DEL MODEL DESIGNA T ION ENGINE HP ENGINE T YPE DRIVE SYST EM TYPE ENGINE MODEL CUTT ING WIDTH SERIES DESIGNATION E – European M odel LT – Lawn T ra ...
-
Snapper ELT145H33GBV - page 2
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This pow erful cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause injury and damag e! Failure to comply with the following SAFETY in stru ctions could resu lt in serious injury or death to the ope rator or other persons. The ow ner of the machine must understa ...
-
Snapper ELT145H33GBV - page 3
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pe ts out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, d eflectors, switch es, blade controls an d other safety dev ices frequently for proper oper ation and location. 9. M ake sur ...
-
Snapper ELT145H33GBV - page 4
4 TABLE OF CONTENTS IMPORTA NT SA FETY INSTRUCT ION S ............ 2-3 TA BLE OF CONTE NT S ........................................ 4 SEC TION 1 - FA MILIA RIZA TION ...................... 5-7 Compone nts ........................................................5 Controls ................................................................5 Decals / Sy ...
-
Snapper ELT145H33GBV - page 5
5 Section 1 - FA MILIA RIZA TION COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the com ponents and their operation BEFO RE OPERATING. Spec ific details involving the engine ar e found in the ...
-
Snapper ELT145H33GBV - page 6
6 Section 1 - FA MILIA RIZA TION – DECA LS / SYMBOLS A ll operators should locate, read and understand all decals on the Series G Law n T ractor before attempting any operation of the tractor. If any operator ha s difficulty in unde rstanding cer tain symbols incorpor ated in th e decals, an authorized SNA PPER deal er should be contacted for exp ...
-
Snapper ELT145H33GBV - page 7
7 Section 1 - FA MILIA RIZA TION – DECA LS / SYMBOLS FRA ME I NSTRUCTIONS DECAL B71.1-1998 CERTIFI CATION DECA L 7-2920 CONSOLE DE CAL 2-8561 RA BBI T ”FA ST” TURTLE “SLOW” CHOKE ENGINE “OFF” STA RT ENGINE ENGINE “ON” LIGHTS “ON” LIGHTS “OFF” HEIGHT OF CUT DECAL 4-6218 LOW EST HEIGHT OF CUT HIGHEST HEI GHT OF CUT FORW A RD ...
-
Snapper ELT145H33GBV - page 8
8 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires . 2.1.2. Check guards, deflector s and covers to m ake sure all are in plac e and secur ...
-
Snapper ELT145H33GBV - page 9
9 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets. Tak e note of any stationary obstacles! NOTE: The interlock s y s tem will prevent the engine f rom ...
-
Snapper ELT145H33GBV - page 10
10 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RT ING & OPE RA T ION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift s peed control lever to neutral. 2. Start engine. Ref er to Section “START ING ENGINE” . 3. Release clutc h/brake pedal. 4. Slowly shift s peed control lever f orward for forward m otion or to the rear f or reverse m otion. ...
-
Snapper ELT145H33GBV - page 11
11 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STOPPIN G MO WER BLADE 1. Stop mower blade by moving blade engagem ent lever to the "OFF " position. See Figure 2.11. FIGURE 2.11 WA RNING Once blade is disengaged, it s hould come to a complete stop in 5 seconds or less. If the blade continues to rotate afte r 5 seconds, the bla ...
-
Snapper ELT145H33GBV - page 12
12 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF Rolling Hydro Models 1. W ith engine "O FF", move to r ear of tractor . 2. Pull the roll releas e control all the way out to disengage the hydro transmis sion. See Figure 2.15. FIGURE 2.15 3. Move tractor to desired location. 4. Push roll r elease control all the ...
-
Snapper ELT145H33GBV - page 13
13 Section 2 - OPERA TING INSTRUCTIONS 2.7. RE VERSE LOCKOUT MECHANIS M Data indicates that tragic back-over accidents occ ur each year. Thes e accidents us ually involve unsupervised children. Many times thes e children have been given rides on the machine and have been trained to view this potentially dangerous piece of m achinery as fun rather t ...
-
Snapper ELT145H33GBV - page 14
14 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the Tr actor, use genuine SNAPPER replacem ent parts only. Contact a local SNAPPER dealer f or parts and servic e assistance. For the correc t part or inform ation for a particular Trac tor, alwa ys m e ntio n the model and ser ial number. SNAPPER recom mends returning the T ra ...
-
Snapper ELT145H33GBV - page 15
15 Section 3 - MA INTENA NCE 3.2.4. CHECK 33" DECK DRIVE BELT 1. W ith engine "OFF", m ove blade engagement lever to "ON". 2. Measure blade c able extension spring. Spring should extend 1" +/-1/8" f or proper belt tens ion. See Figure 3.3. FIGURE 3.3 3. To adj ust tension, Refer to Section “BLADE BELT ADJ USTMEN ...
-
Snapper ELT145H33GBV - page 16
16 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION 1. Front W heel Bearings Lubricate each f ront wheel bearing through the grease f itting on w heel hub. Using general purpose grease in a greas e gun, add grease until grease purges f rom bearing. See F igure 3.5. FIGURE 3.5 2. A xle Spindles Lubricate each ax le spindle with 1 to 3 shots of ...
-
Snapper ELT145H33GBV - page 17
17 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION (Continued From Pre vious Page) 7. Steering T ie Rod Lubricate both ends of steering tie rod with a sm all amount of 30 wt. m otor oil fr om an oil can. See Figure 3.9. FIGURE 3.9 8. Blade Engagemen t Mechanism Using 30 wt. motor oil, lubricate the blade engagement mec hanism pivot points , ...
-
Snapper ELT145H33GBV - page 18
18 Section 3 - MA INTENA NCE 3.4 A NNUALLY (END OF EA CH SEA SON) 3.4.2. FUEL FILT ER (Continued From Pre vious Page) 3. Install new fuel filter part num ber 1-4359. See Figure 3.13. FIGURE 3.13 4. Fill f uel tank with fresh gasoline. Ref er to engine owner's m anual for fuel s pecifications . 3.4.3. SPA RK PLUG Remove and replace engine spark ...
-
Snapper ELT145H33GBV - page 19
19 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extremely hot. A void burns by allowing engine and c ...
-
Snapper ELT145H33GBV - page 20
20 Section 4 - A DJUSTMENT & REPA IR 4.2.2. BLA DE BELT A DJUSTM ENT – 33” Deck (Continued from previous page ) IMPO RTA NT: If dec k front to rear level is not co rr ec t, this could cause blade belt pr oblems. 6. Move blade engagement lever to "ON". 7. Measure blade cable ex tension spring. Spring should extend 1" +/-1/8&qu ...
-
Snapper ELT145H33GBV - page 21
21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extremely hot. A void burns by allowing engine and c ...
-
Snapper ELT145H33GBV - page 22
22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug. E ngine and components can be extremely hot. A void burns by allowing engine and c ...
-
Snapper ELT145H33GBV - page 23
23 Section 4 - A DJUSTMENT & REPA IR 4.3 TRACTOR DRIVE COMPONENTS 4.3.1. BRA KE ADJUSTMENT 1. To be properly adjusted, the brak e should stop the trac tor in approx imately 6 feet from top speed when the clutch/brak e pedal is fully depressed. 2. Adjust br ake when necess ary as follows: 3. Tur n engine “OFF”. Rem ove key. 4. Locate brake a ...
-
Snapper ELT145H33GBV - page 24
24 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustments, maint enance or service with the engine or blade running. STOP blade. ST OP engine. Set brake. Remove key. Remov e spark plug w ire from sp ark plug and secure wire away from spa rk plug. Engine a nd components can be extremely hot. Avoid burns by allowing engine and ...
-
Snapper ELT145H33GBV - page 25
25 Section 4 - A DJUSTMENT & REPA IR 4.4.2. (NINJA ) BLA DE WEA R LIM ITS The ninj a recycling blade requires m ore fr equent service intervals than s tandard blades. Check for exc essive wear and damage bef ore each use. See Figur e 4.18. FIGURE 4.18 4.4.3. (STA NDA RD) BLA DE SHA RPE NING Blades should be k ept sharp at all tim es. W hen the ...
-
Snapper ELT145H33GBV - page 26
26 Section 4 - A DJUSTMENT & REPA IR 4.4.5. 33" M OWER BLADE REPLA CEM ENT (Continued) 6. Ins tall new blade, part number 3-4168, onto blade mounting bar . 7. T orque 30 to 40 ft lbs . 4.4.6. TRACTION DRIVE BELT REPLA CEM ENT It is necess ary to remove deck in order to replace belts. Rem ove deck as follows: 1. Place tr actor on a firm , l ...
-
Snapper ELT145H33GBV - page 27
27 Section 4 - A DJUSTMENT & REPA IR Traction driv e belt removal (Continued from previous page ) 2. Slide belt guide assem bly to the rear and rem ove. 3. Disconnec t traction belt idler pulley spring from tractor f rame. See F igure 4.26. FIGURE 4.26 WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade run ...
-
Snapper ELT145H33GBV - page 28
28 Section 4 - A DJUSTMENT & REPA IR Tractio n drive belt replacemen t (Continued from previous page ) NOTE: W hen ins talling a new belt, mak e certain the stationary idler is m ounted in the hole closest to the L.H. side of the trac tor. See Figure 4.29. 4. Mak e certain belt is within belt guides of idler s. 5. Attach tension idler spring to ...
-
Snapper ELT145H33GBV - page 29
29 Section 4 - A DJUSTMENT & REPA IR 4.5 BA T TERY 4.5.1. BA T TERY REM OVA L 1. Raise operator 's seat. 2. Rem ove the two adjusting knobs. 3. Rem ove seat assem bly and move forward. Use care not to disc onnect wires from seat switch. See Figure 4.33. FIGURE 4.33 4. Rem ove negative ( - ) cable f irst. 5. Rem ove positive ( + ) cable las ...
-
Snapper ELT145H33GBV - page 30
30 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! DO NO T attempt to service or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded. The unloaded tes t is the procedure that will be discuss e ...
-
Snapper ELT145H33GBV - page 31
31 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER Series F LAW N TR ACTO R can be equipped with a variety of accessor ies that incr ease its ver satility. The acces sories available for each model ar e listed in the c hart below. Contact an authorized SNAPPER dealer for or dering any of the acc essories desir ed. AV AI ...
-
Snapper ELT145H33GBV - page 32
32 SECTION 5 - ELECTRICA L SYSTEM Figure 5.1 illustr ates ty pic al harness routing on s ome Snapper Lawn T ractors. Us e this when locating various electric al com ponents. FIGURE 5.1 TO BATTERY NEGA TIVE (-) TERM IN A L TO BATTERY POSITIVE ( +) TERM IN A L SOLENOID (UNDER SEAT) SEA T SWITCH IGNIT ION SWITCH HEA DLIGHT SWITCH 20 A M P FUSE PA RK B ...
-
Snapper ELT145H33GBV - page 33
33 SECTION 5 - ELECTRICA L SYSTEM SCHEMATICS BRIGGS & STRA T TON WIT HOUT LIGHTS FIGURE 5.2 BRIGGS & STRA T TON WIT H LIGHTS FIGURE 5.3 ...
-
Snapper ELT145H33GBV - page 34
34 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Starter Will Not Crank Engine 1. Battery dead. 1. Service battery. 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact. 4. Defective ignition s witch. 4. Contact authorized SNAPPER dealer. 5. Starter Spins ...
-
Snapper ELT145H33GBV - page 35
35 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Tractor Will Not Move Or L oss Of Traction 1. Speed control handle in the neutral “ N” position. 1. Place speed contr ol in desired speed. 2. Roll release contr ol in “ROLL” position. (Hydro Models Only) 2. Move roll release c ontrol to the engaged position. 3. Low transm i ...
-
Snapper ELT145H33GBV - page 36
36 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 8 X Engine Initial Oil Change Page 14 X Engine P eriodic Oil Change Page 15 X* A ir Pre-Cleaner Service Sponge Pre - Cleaner Element Engine Manual X** A ir Cleaner Replace Element Engine Ma ...
-
Snapper ELT145H33GBV - page 37
37 3 YEA R LIMIT ED WA RRANTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SN A PPER , through any authorized SNA PPER dealer will replace, f ree of charge ( except for taxes where applicable), any part or parts found upon exam ination by the f actory at McDonough, Georgia, to be de ...
-
Snapper ELT145H33GBV - page 38
38 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _____________________________________________________________ ...
-
Snapper ELT145H33GBV - page 39
39 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _____________________________________________________________ ...
-
Snapper ELT145H33GBV - page 40
40 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _____________________________________________________________ ...
-
Snapper ELT145H33GBV - page 41
41 Safety Instructions & Operator’s Manual for EUROPEAN LAWN TRACTOR HYDROSTATIC DRIVE SERIES G IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines conta in very impor tant emissions infor mation and critical safety warnings. Read, ...
Haben Sie eine Frage bezüglich Snapper ELT145H33GBV?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Snapper ELT145H33GBV nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Snapper ELT145H33GBV hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.