-
Swann PRO-750 - page 1
PRO-750 Dome M750CAM190312E English ...
-
Swann PRO-750 - page 2
2 FCC V erification: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de - signed to provide r easonable protection against harmful interference in a r esiden - tial installation. This equipment generates, uses and can radiate radio frequency ...
-
Swann PRO-750 - page 3
3 Before you Begin 2 T able of Contents 3 Quick Reference 3 Overview 4 Package Contents 4 Layout of the Camera and PTZ Controller 5 Layout of Remote Contr ol 6 Connecting the Camera 8 Mounting the Camera 10 Setting the Command Addr ess 12 Configuring the PTZ Contr oller 12 Connecting Multiple PTZ Systems 13 Operating the Camera 14 Advanced Operati ...
-
Swann PRO-750 - page 4
4 Congratulations on your purchase of this 360º PTZ Camera Dome! This system is an ideal solution for monitoring a large area – a combination of a high quality CCD image sensor mounted in a contained dome with the option to pan fully 360º. Nothing will be out of sight for long! Whether you wish to do this using the full complement of manual con ...
-
Swann PRO-750 - page 5
5 1. W all-Mount Arm F or mounting the PRO-750 Dome to a wall, post or similar vertical surface. 2. Ceiling-mount Bracket F or mounting the PRO-750 Dome to the underside of a ceiling or overhang. 3. Camera Housing Contains the camera, PTZ unit and associated circuitry and electronic components . 4. Dome Cover Protects the camera. 4 1 3 2 5. LED Dis ...
-
Swann PRO-750 - page 6
6 DISP (Display) T oggles the display on the front of the PTZ Controller , showing the Command Address , Protocol and Baud Rate . PRESET (HOLD to define) Changes or accesses preset points . P A TTERN (press and HOLD) Allows for the programming of lists of preset points for the camera to view in sequence . DELETE (press and HOLD) Will remove a Pres ...
-
Swann PRO-750 - page 7
7 ZOOM + / - : Increases and decreases the level of magnification, respectively . T he PRO-750 features a 3x optical zoom. FOCUS + / - and IRIS OPEN / CLOSE T he PRO-750 PTZ Dome features automatic focus and exposure adjustment. As a result, you will not need to use these buttons whilst operating the PRO-750. They’ve been included on the remote ...
-
Swann PRO-750 - page 8
8 1 2 5 7 4 3 1. After running the camera cable through the mounting arm/bracket, attach to the main plug on the camera circuit boar d (see opposite). 2. Connect the BNC connector and power connectors to an extension cable (optional). 3. Connect the purple and white wires to the RS485 plug, and insert the RS485 plug into the RS485 port on the rear ...
-
Swann PRO-750 - page 9
9 1. Connecting the Camera Cable Before mounting the camera, it is important to connect it correctly . 1. Run the cable through the mounting arm or bracket you would like to use. 2. Make sure you run the cable thr ough starting with the camera end (not the end with the BNC connectors - they’re too big to fit). 3. Once the cable has been pulled t ...
-
Swann PRO-750 - page 10
10 NO TE: Before you begin, be sure that there are no live electrical cables in the ar ea you wish to mount the camera. T o mount the camera: After connecting the camera as described on page 8 and installing the cables as shown on page 9, place it in the desired location. Then, using an appr opriate screw for the surface you’re fixing the dome t ...
-
Swann PRO-750 - page 11
11 Field of view The PRO-750 can pan a full 360º. This means that (for example) installing the PRO-750 in a tight corner is probably not an ideal utilization of its potential! A wall is a better option, as it allows 180º of view for the camera. A freestanding pole of sufficient height and integrity to reliably hold the camera secur ely is an ide ...
-
Swann PRO-750 - page 12
12 The included PTZ controller is capable of contr olling multiple PTZ cameras. Thus, each camera needs its own unique identification (a “Command Address”). T o define a camera’ s Command Address, connect the camera (and only that camera) to the PTZ controller . Then: • Press the CAM key . The PTZ controller display will now show Axxx ...
-
Swann PRO-750 - page 13
13 Connecting multiple PTZ systems to the included controller is a convenient way to be able to access and control a complex, multi-camera system fr om one central location. This is, however , an advanced feature of PTZ systems, and should only be attempted by those experienced with security system and/or networking technologies. In a nutshell: mul ...
-
Swann PRO-750 - page 14
14 Moving the Camera The easiest way to move the camera is to use the directional buttons. In the standard live contr ol mode, the camera will move in the direction of the button which you press. • T o make the camera pan left or right, press and hold the LEFT or RIGHT directional button, r espectively . Y ou can hold down either button contin ...
-
Swann PRO-750 - page 15
15 Removing a Preset Point Removing Preset Points is performed in much the same manner as defining them. Once a Preset Point has been r emoved, selecting it as detailed opposite will no longer have any effect, until a new point is set. • Press the DELETE button on the remote, and hold for two seconds. • The display will now read “Clr - ...
-
Swann PRO-750 - page 16
16 The numerical command functions shown in this section are r ecommended only for advanced users. Improper use of these commands may interfer e with the functionality of the PTZ system. The PRO-750 PTZ dome can accept many additional commands to those already listed. As there ar e not enough buttons on the remote control to assign one to each func ...
-
Swann PRO-750 - page 17
17 Auto-Home Function The PRO-750 can be configured to automatically r etur n to it’ s master Preset Point, the “Home Point”. This is particularly useful for monitoring a door , hallway , car space or similar , where the default position of the camera should be viewing this location. T o tur n Auto-Home ON and OFF use the numerical command s ...
-
Swann PRO-750 - page 18
18 Problem: My DVR is in Motion Detection mode, and continually recor ds whilst the camera is moving. Solution: This is not a malfunction. When a DVR looks for “motion”, what it is really doing is looking for a change between one image it captur es and the next. Therefor e, it doesn’t matter whether it’ s something the camera sees or the ca ...
-
Swann PRO-750 - page 19
19 Video Image Sensor 1/3” CCD Video Quality 700 TV Lines Number of Effective Pixels NTSC: 976 x 494 P AL: 976 x 582 Minimum Illumination 0.01 Lux White Balance Automatic Signal / Noise Ratio > 50dB Electronic Shutter NTSC: 1/60 – 1/100, 000 P AL: 1/50 – 1/100, 000 Gain Control Automatic Backlight Compensation Y es Lens V ari-focal 4-9mm V ...
-
Swann PRO-750 - page 20
© Swann Communications 2012 Advanced security made easy™ W arranty Information Helpdesk / T echnical Support Details Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time ...
Haben Sie eine Frage bezüglich Swann PRO-750?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Swann PRO-750 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Swann PRO-750 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.