Bedienungsanleitung Kidde Pro line

16 Seiten 0.54 mb
Download

Zur Seite of 16

Summary
  • Kidde Pro line - page 1

    2½ lb - 20 lb Agent Capacity Service Manual Stored Pressure Dry Chemical Hand Portable Fire Extinguishers Pr o Line ...

  • Kidde Pro line - page 2

    2 T able of Contents Page 2 Contents Page 3 Introduction General Information Descriptions Page 4 Operation Instructions Page 5 After Use Instructions Monthly Inspection Procedures Page 6 Annual Maintenance and Service Examination Procedures Page 8 Recharge Instructions Page 10 Hydrostatic T est Requirements Page 12 T rouble Shooting Suggestions Pag ...

  • Kidde Pro line - page 3

    Introduction This manual is designed as a guide to service personnel in the performance of operation, after use, inspection, maintenance, service and recharge of Kidde dry chemical hand portable fire extinguishers. These instructions are written and intended to be used by those personnel already familiar with standard industry fire extinguisher saf ...

  • Kidde Pro line - page 4

    4 2. Discharge valve assembly - consists of the operating lever , carrying handle, valve stem, pressure gauge and discharge outlet that permits the actuation and discharge of the dry chemical extinguishing agent. 3. Siphon tube assembly - houses the spring assembly and provides the means for the extinguishing agent to be drawn up from the bottom of ...

  • Kidde Pro line - page 5

    5 After Use Instructions Note: Fire extinguishers should always be r echarged immediately after any use . 1. Invert extinguisher , then while securing and pointing the nozzle in a safe direction, squeeze the operating lever valve to clear hose and vent all remaining pressure from the extinguisher . 2. Notify proper person that extinguisher was used ...

  • Kidde Pro line - page 6

    6 Annual Maintenance & Service Procedur es Per NFP A-10, maintenance is a thorough examination of a fire extinguisher and is intended to provide maximum assurance that it will operate effectively and safely . It includes a thorough examination of all components and the repair or replacement of such items if necessary . Maintenance should be per ...

  • Kidde Pro line - page 7

    7 discharge nozzle, and/or hose assembly is correct for the model. (Newer Kidde models indicate this information on their nameplates) 6. Visually examine the cylinder valve discharge port for any signs of thread wear , corrosion, obstructions or accumulations of any foreign material. 7. Examine the pressure gauge for the following, properly depress ...

  • Kidde Pro line - page 8

    8 15. Wipe the extinguisher clean with a damp cloth to remove any surface dirt or contaminants that may have accumulated. 16. Upon satisfactory completion of the maintenance examination, properly tag, label and record the procedure in accordance with NFP A-10 and any local requirements. Recharge Instructions According to NFP A-10, recharge is the r ...

  • Kidde Pro line - page 9

    9 5. Remove the discharge valve assembly from the agent cylinder . Disassemble the siphon tube and remove the spring and discharge valve stem. Note: Fir e extinguisher valve assemblies are not typically indexed for orientation with other cylinders, so any time extinguisher valve assemblies are r emoved, they should always be tagged or refer enced s ...

  • Kidde Pro line - page 10

    10 Note: During recharge, dry chemical agent can accumulate and pack within the siphon tube when installing the valve assembly into the cylinder . Recharge personnel should ensure the time requir ed for total pressurization is appropriate for the model size. Extinguisher pressurization obtained too quickly may indicate a plugged siphon tube. 13. Up ...

  • Kidde Pro line - page 11

    Evidence of conditions such as exposure to fire or heat, thread damage, thread wear , corrosion, cylinder repairs or physical damage as detailed within NFP A-10 require the extinguisher cylinder to be removed from service and proper disposal at the owner’ s direction. Hydrostatic testing should only be performed by those persons trained in the ap ...

  • Kidde Pro line - page 12

    12 T rouble Shooting Suggestions Problem Corrective Suggestion Wall hook/bracket loose or damaged Secure, repair or replace Nozzle obstructed Clear , clean or replace Discharge hose assembly worn, cracked Replace or damaged. Hose o-ring missing, cracked or damaged Replace and lightly lubricate Hose retainer/band missing or damaged Replace V alve di ...

  • Kidde Pro line - page 13

    Dry Chemical Extinguisher Parts Diagram - Aluminum V alve 13 KIDDE PRO LINE STORED PRESSURE DR Y CHEMICAL PORT ABLE EXTINGUISHER DIAGRAM (ALUMINUM V AL VE) The following spares parts ar e available for the Kidde Pro Line: (1) Hose/nozzle assembly (2) Syphon tube assembly (excludes o-ring) (3) V alve assembly (includes handle & lever attached &a ...

  • Kidde Pro line - page 14

    Dry Chemical Extinguisher Parts Diagram - Aluminum V alve 1 4 KIDDE PRO LINE STORED PRESSURE DR Y CHEMICAL PORT ABLE EXTINGUISHER DIAGRAM (ALUMINUM V AL VE) The following spares parts ar e available for the Kidde Pro Line: (1) Hose/nozzle assembly (2) Syphon tube assembly (excludes o-ring) (3) V alve assembly (includes handle & lever attached & ...

  • Kidde Pro line - page 15

    Dry Chemical Extinguisher Parts Diagram - Aluminum V alve 15 KIDDE PRO SERIES STORED PRESSURE DR Y CHEMICAL PORT ABLE EXTINGUISHER DIAGRAM (BRASS V AL VE) The following spares parts ar e available for the Kidde Pro Line: (1) Hose/nozzle assembly (2) Syphon tube assembly (excludes o-ring) (3) V alve assembly (includes handle & lever attached &am ...

  • Kidde Pro line - page 16

    Kidde Residential and Commercial 1394 South Third Street Mebane, NC 27302-9711 (Phone 1-800-880-6788) Manual P/N- 300290 Copyright © Kidde 200 5 ...

Produzent Kidde Kategorie Fire Extinguisher

Dokumente, die wir vom Produzenten des Geräts Kidde Pro line erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Kidde
- Bedienungsanleitungen Pro line
- Produktkarten Kidde
- Informationsbroschüren
- oder Energieetiketten Kidde Pro line
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Kidde Pro line.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Kidde Pro line, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Kidde Pro line. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Kidde Pro line ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Kidde Pro line, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Kidde Pro line hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Kidde Pro line verständlich ist.

Eine gänzliche Bedienungsanleitung von Kidde sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Kidde Pro line bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Kidde Pro line befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Kidde Pro line, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Kidde Pro line - die uns die ersten Schritte während der Nutzung von Kidde Pro line erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Kidde Pro line hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Kidde Pro line im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Kidde Pro line?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Kidde Pro line nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Kidde Pro line hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)