Bedienungsanleitung Aztech Systems 16

14 Seiten 0.33 mb
Download

Zur Seite of 14

Summary
  • Aztech Systems 16 - page 1

    - 1 - Version 1-2000 Novemb er 2000 OPERATION AND MA INTENANCE MANU A L FOR TX 2, 4, 8, 16, 32 LOW PROFILE HYDRAUL IC TORQUE WRENCHES Series TX-2, T X-4, T X-8, TX-16 and TX- 32 Low Prof ile Hydraulic T orque Wren ches are d esigned fo r installing and removin g large bo lts hav ing minima l wrench clearance at o ffsh ore platforms , pow er plants, ...

  • Aztech Systems 16 - page 2

    - 2 - FAILURE TO OBS ERVE THE FOLLOWING W ARNINGS COULD RESULT IN INJ URY USING TH E TOOL • Keep hands, lo ose clot hing and long hair aw ay fro m the re action a rm and w orking area during operatio n. Do no t attempt to support the t ool wit h your ha nds during o peration. • This too l will exert a strong react ion forc e. Use proper mechani ...

  • Aztech Systems 16 - page 3

    - 3 - PLACING THE TOOL IN SERVICE ADJUSTMENTS SETTING THE TORQUE After deter mining the desir ed torq ue, use the torque c on- version chart on the Shro ud or the tor que conversio n charts on page s 5 and 6 to deter mine the pressure that is necessar y to achieve that torque. 1. Connect t he tool to the po wer supply and turn t he pump on. 2. Dep ...

  • Aztech Systems 16 - page 4

    - 4 - TX Series T orque Con version Chart Bar/N.M. TX-2 TX-4 TX-8 TX-16 TX-32 Hex 3/4" to 1-13/1 6" 1-7/8" to 2 -3/8" All Hex Sizes All Hex Sizes 2-5/8" to 3 -15/16" 4" to 4-5/8" 2-7/16" to 4-5/8" 4-11/16" to 6-1/2" Sizes 19 to 46MM 47 to 60MM All Hex Sizes All Hex Sizes 65 to 100MM 105 to ...

  • Aztech Systems 16 - page 5

    - 5 - TX Series Torque Conversion Chart P.S.I./FT./lbs TX-2 TX-4 TX-8 T X-16 TX-32 Hex 3/4" to 1-13/1 6" 1-7/8" to 2 -3/8" All Hex Sizes All Hex Sizes 2-5/8" to 3 -15/16" 4" to 4-5/8" 2-7/16" to 4-5/8" 4-11/16" to 6-1/2" Sizes 19 to 46MM 47 to 60MM All Hex Sizes All Hex Sizes 65 to 100MM 1 ...

  • Aztech Systems 16 - page 6

    - 6 - TX - 16, TX - 32 SERIES LINK TX - 2, TX - 4, TX - 8 SERIES LINK ...

  • Aztech Systems 16 - page 7

    - 7 - Part Numbers for Ordering (LINKS) Part TX2 TX4 T X8 TX16 TX32 1 SIDE PL A TE - L TX-2- L01 TX-4- L01 TX-8- L01 TX-16- L01 TX-32- L01 2 SIDE PL A TE - R TX-2- L02 TX-4- L02 TX-8- L02 TX-16- L02 TX-32- L02 3 DRIVE PL ATE TX-2- L03 TX-4- L03 TX-8- L03 TX-16- L03 TX-32- L03 4 DRIVE PIN TX-2- L05 TX-4- L05 TX-8- L05 TX-16- L05 TX-32- L05 5 DRIVE P ...

  • Aztech Systems 16 - page 8

    - 8 - TX - 2, TX - 4, TX - 8 SERIES CYLINDER TX - 16, TX - 32 SERIES CYLINDER ...

  • Aztech Systems 16 - page 9

    - 9 - Part Numbers for Ordering (CYLIND ERS) Part TX2 T X4 TX8 TX16 TX32 1 HOUSING TX-2-C01 TX-4-C01 TX-8-C01 TX-1 6-C01 TX-32-C01 PISTON ROD A SSEM BLY TX-2 -C03 TX-4-C03 TX-8-C03 TX-16 -C03 TX-32-C03 2 PISTON ROD TX-2-C03-1 N/A N/A TX-16-C03-1 TX-32-C03-1 3 PISTON C A P N/A N/A N/A TX-16-C03-2 TX-32-C03-2 VALVE B ALL N/A N/A N/A TX-16-C03-3 TX-32 ...

  • Aztech Systems 16 - page 10

    - 10 - Maintenance Section Alway s turn off t he powe r supply, bleed off hydraulic fluid fro m the hose co nnections on the cy linder assembly and disconnect t he hoses before a ttempting to repa ir or perfor m maintenance on this to ol. Alway s wear eye pr otectio n when opera ting or perfor ming maintenance on t his tool. DISASSEMBLY General Ins ...

  • Aztech Systems 16 - page 11

    - 11 - unscrew and r emove the pisto n head fro m the sha ft with the Pisto n O-ring (1 7). 7. Pull the Piston shaft out o f the Housing. 8. If the Sliders ( 5) must be re placed, position the Slider Pin (14 ) over a clear ance opening in a soft bloc k and use a small dr ift to tap the Pin out of the Sliders and shaft. 9. If the Rod Seal (16) needs ...

  • Aztech Systems 16 - page 12

    - 12 - 7. Wipe a thin film of Marine G rade Moly Lube onto t he inner race of t he large op ening in the Dri ve Plate. 8. Position the Ratc het (6) in the central o pening of the Drive Plate. 9. Insert the Dri ve Segment (7 ) into the op ening adja cent to the Ratchet. M ake cert ain t he tee th of the R atchet corre ctly engage the t eeth of t he ...

  • Aztech Systems 16 - page 13

    - 13 - the outer edge o f both Slid ers or d eep enough to prevent the sha ft ends from dragging o n the Hous ing walls. 6. Install the Pisto n O-ring (1 7) in the inter nal groove of the Seal Ring ( 5). 7. Install the asse mbled Seal Ring and P iston O-rin g on the hub at the lar ge end o f the P iston Rod. 8. Install the Pisto n Seal P late (4) i ...

  • Aztech Systems 16 - page 14

    - 14 - Troubleshootin g Guide Trouble Probable Cause Solution Couplers are not securely at tached to the tool or pump Check the Coupler connections and m ake certain that they are connected. Coupler is defective Replace any defective Coupler. Defective remote control switch Repl ace the switch and/or c ontrol pendent Piston will not advance or retr ...

Produzent Aztech Systems Kategorie Impact Driver

Dokumente, die wir vom Produzenten des Geräts Aztech Systems 16 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Aztech Systems
- Bedienungsanleitungen 16
- Produktkarten Aztech Systems
- Informationsbroschüren
- oder Energieetiketten Aztech Systems 16
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Aztech Systems 16.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Aztech Systems 16, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Aztech Systems 16. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Aztech Systems 16 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Aztech Systems 16, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Aztech Systems 16 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Aztech Systems 16 verständlich ist.

Eine gänzliche Bedienungsanleitung von Aztech Systems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Aztech Systems 16 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Aztech Systems 16 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Aztech Systems 16, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Aztech Systems 16 - die uns die ersten Schritte während der Nutzung von Aztech Systems 16 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Aztech Systems 16 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Aztech Systems 16 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Aztech Systems 16?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Aztech Systems 16 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Aztech Systems 16 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)