Bedienungsanleitung GE ZXR8510

12 Seiten 0.35 mb
Download

Zur Seite of 12

Summary
  • GE ZXR8510 - page 1

    ® If you have questions , call 800.GE.CARES or visit our website at: www .monogram.com Installation Instructions M o n o g r a m ZXR858, ZXR859 and ZXR8510 Recirculating Accessories For Model ZV850, Island V ent Hood ...

  • GE ZXR8510 - page 2

    Installation Preparation W ARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSER VE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer . If you have any questions, contact the manufacturer . B. Before servicing or cleaning unit, switch power off at the service panel and lock ser vice panel to ...

  • GE ZXR8510 - page 3

    Installation Preparation 3 REQUIRED ACCESSORIES This book provides step by step instructions to install the Monogram ZV850 ceiling mounted hood for recirculating operation. • One of the following accessory kits is required for non- vented ceiling mounted installations of model ZV850. Choose the correct kit according to ceiling heights: ZXR858 – ...

  • GE ZXR8510 - page 4

    Installation Preparation 4 TOOLS AND MA TERIALS REQUIRED (NOT SUPPLIED) • T ape measure • Knife • Spirit level • Wire cutter/stripper • Wire nuts • Electric drill and 5/32” bit • Phillips and flat-blade screwdrivers • Hammer • Pliers • Center punch • 10 mm Hex wrench/socket • Safety glasses • Duct tape • Plumb • Glov ...

  • GE ZXR8510 - page 5

    Installation Preparation 5 REMOVE THE P ACKAGING The vent hood is packed separate from the required accessory: ZXR858, ZXR859 or ZXR8510. • Remove the frame, cover , parts box, side bars and packaging. • Remove junction box cover . • Install strain relief onto junction box cover . Check Installation Hardware Locate the hardware accessory box ...

  • GE ZXR8510 - page 6

    Installation Preparation 6 – The framing should be spaced 8-5/8” on the sides and 7-5/8” at the front from centerline to centerline to accept mounting screws in the vent support frame. Note: The cross framing must be spaced 8-3/4" on the side from centerline to centerline in order to accept the hood mounting screws. INST AL L CE IL ING S ...

  • GE ZXR8510 - page 7

    Installation Instructions 7 3 INST ALL L O WER SUP POR T FR AME • Insert lower support frame (from required accessory ZXR858, ZXR859 or ZXR8510) into the upper support frame and loosely secure with 8 screws and washers (4 on the front and 4 on the back sides). • Adjust the lower support frame up or down to the desired height above the counterto ...

  • GE ZXR8510 - page 8

    Installation Instructions 8 • T ape the wire to the front of the frame support to prevent damage during installation and service. Ceiling Support Frames Tape House Wiring Front Side 5 SIZE AND INST ALL DUCTWORK • Measure from top duct connector (Dim. A) to bottom of support frame. – Add at least 1 ″ for duct overlap at the top. – Subtract ...

  • GE ZXR8510 - page 9

    Installation Instructions 9 6 INST ALL DECORA TIVE DUCT COVERS • Pretap or drive decorative screw into the screw holes on the support frame. This will make screw installation easier . • Separate the two decorative duct covers. • Select the inside (top) cover , which has vent hole pattern at the top. • Slide the decorative duct cover over th ...

  • GE ZXR8510 - page 10

    Installation Instructions 10 7 INST ALL HOOD Note: TWO PEOPLE ARE REQUIRED TO COMPLETE THIS INST ALLA TION! • Lift the hood up to the support frame. Carefully align the hood mounting studs into the support frame holes, and at the same time, guide the hood duct connector into the duct. • Install 4 nuts and lock washers. Tighten with a 10mm wrenc ...

  • GE ZXR8510 - page 11

    Upper Charcoal Filter Slots Grasp T ab, Lift and Pull Forward Installation Instructions 11 9 SLIDE DUCT COVER DOWN, INST ALL SIDE UTILITY BARS • Hold the decorative duct cover and remove the temporary stop screw from the support frame. Return the screw to the service manual envelope for future use. • Slide the lower duct cover down onto the hoo ...

  • GE ZXR8510 - page 12

    Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram TM local service in your area, call 1.800.444.1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice. Pub. No. 49-80045-2 ...

Produzent GE Kategorie Ventilation Hood

Dokumente, die wir vom Produzenten des Geräts GE ZXR8510 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen GE
- Bedienungsanleitungen ZXR8510
- Produktkarten GE
- Informationsbroschüren
- oder Energieetiketten GE ZXR8510
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung GE ZXR8510.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen GE ZXR8510, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen GE ZXR8510. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts GE ZXR8510 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts GE ZXR8510, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von GE ZXR8510 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von GE ZXR8510 verständlich ist.

Eine gänzliche Bedienungsanleitung von GE sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von GE ZXR8510 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von GE ZXR8510 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich GE ZXR8510, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts GE ZXR8510 - die uns die ersten Schritte während der Nutzung von GE ZXR8510 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit GE ZXR8510 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von GE ZXR8510 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich GE ZXR8510?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit GE ZXR8510 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit GE ZXR8510 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)