Deutsch dropdown-ico

Bedienungsanleitung Bolens 12229

32 Seiten 0.94 mb
Download

Zur Seite of 32

Summary
  • Bolens 12229 - page 1

    OWNER’S MANUAL Rear -T ine T iller • Safety • Assembly • Features and Controls • Operation • Maintenance • Parts List GARDEN WAY INCORPORATED SAFETY FIRST! Before operating this equipment, read this Owner's Manual and the separate manual supplied by the engine manufacturer . Model 12229 ...

  • Bolens 12229 - page 2

    2 T able of Contents SECTION 1: SAFETY ........................................... 3 Safety Decals ............................................................. 5 Operating Symbols ..................................................... 5 SECTION 2: ASSEMBLY ....................................... 6 Attach Handlebar .................................. ...

  • Bolens 12229 - page 3

    Safety 1 Section 3 T raining 1. Carefully read this Owner ’ s Manual, the separate Engine Owner ’ s Manual, and any other literature you may receive. Be thor- oughly familiar with the controls and the proper use of the tiller and its engine. Know how to stop the unit and disengage the controls quickly. 2. Never allow children to operate the til ...

  • Bolens 12229 - page 4

    4 Section 1: Safety 4 . Exercise caution to avoid slipping or falling. 5 . If the unit should start to vibrate abnor- mally, stop the engine, disconnect the spark plug wire and prevent it from touching the spark plug, and check imme- diately for the cause. Vibration is gener- ally a warning of trouble. 6 . Stop the engine, disconnect the spark plug ...

  • Bolens 12229 - page 5

    Figure 1-2: Location of safety and operating decals. Section 1: Safety 5 Decals For your safety and the safety of others, various safety and opera- tional decals are located on your unit (see Figure 1-2). Keep the decals clean and legible at all times. Contact your local ser- vice dealer for replacements if any decals are damaged or missing. Refer ...

  • Bolens 12229 - page 6

    Assembly 2 Section 6 INTRODUCTION Carefully follow these assembly steps to correctly prepare your tiller for use. It is recommended that you read this Section in its entirety before beginning assembly. NOTE: Various tiller models are presented in this Manual. Use only the information appropriate for your tiller model. INSPECT UNIT Inspect the unit ...

  • Bolens 12229 - page 7

    Section 2: Assembly 7 2. Remove the hairpin cotter (L, Fig. 2-3) and wheel drive pin (M) from the wheel hub (O) and wheel shaft (N). 3. Slide the wheel fully inward on the wheel shaft (N, Fig. 2-3). Reinstall the wheel drive pin (M) through the wheel shaft only (not through the wheel hub). Secure the wheel drive pin with the hairpin cotter (L), pus ...

  • Bolens 12229 - page 8

    4. Thread the #10-24 hex nut (Z, Fig. 2-5) halfway onto the screw (V). 5. Thread the screw (V) into the cable adjuster (X). 6. Hook the cable spring (W, Fig. 2-6) into the V-shaped bend in the Forward Clutch Bail (Y). 7. Check for correct tension on the for- ward drive belt by taking two measure- ments of the cable spring, as follows: a. With the F ...

  • Bolens 12229 - page 9

    Section 2: Assembly 9 STEP 6: ADD MOTOR OIL TO ENGINE The tiller is shipped without oil in the engine. IMPORTANT: Do not start the engine without first adding motor oil. Severe engine damage will result if the engine is run without oil. 1. Refer to the separate Engine Owner ’ s Manual for engine oil specifications and capacities. 2. With the till ...

  • Bolens 12229 - page 10

    Features and Controls 3 Section 10 INTRODUCTION This Section describes the location and function of the controls on your tiller. Refer to the following Section, Operation for detailed operating instructions. Practice using these controls, with the engine shut off, until you understand the operation of the controls and feel confi- dent with each of ...

  • Bolens 12229 - page 11

    Section 3: Features and Controls 11 FORWARD CLUTCH BAIL The Forward Clutch Bail (E, Figure 3-4) controls the engagement of forward drive to the wheels and tines. To operate the Forward Clutch Bail: 1. Put wheels in WHEEL DRIVE position (see “ WARNING ” statement above). 2. Lift and hold the clutch bail (E, Figure 3-4) against the handlebar to s ...

  • Bolens 12229 - page 12

    Operation 4 Section 12 INTRODUCTION Read this Operation Section and the sepa- rate Engine Owner ’ s Manual before you start the engine. Then, take the time to familiarize yourself with the basic opera- tion of the tiller before using it in the garden. Find an open, level area and prac- tice using the tiller controls without the tines engaging the ...

  • Bolens 12229 - page 13

    Section 4: Operation 13 Stopping the Engine and Tiller 1. To stop the wheels and tines, release the Forward Clutch Bail. 2. To stop the engine, put the ignition switch and/or the throttle control lever in the “ OFF ” or “ STOP ” position. OPERA TING THE TILLER The following operating instructions pro- vide guidelines to using your tiller ef ...

  • Bolens 12229 - page 14

    14 Section 4: Operation Preparing Seedbeds Fig. 4-5 Fig. 4-6 • If the garden size will not permit lengthwise and then crosswise tilling, then overlap the first passes by one-half a tiller width, followed by successive passes at one- quarter width (see Fig. 4-7). With planning, you can allow enough room between rows to cultivate (see Fig. 4-8). Le ...

  • Bolens 12229 - page 15

    Section 4: Operation 15 TILLING TIPS & TECHNIQUES (cont.) Power composting simply means tilling under and burying in the soil all manner of organic matter such as crop residues, leaves, grass clippings and cover crops. This material will decompose during the non-growing season and add important natural nutri- ents to the soil. The first place t ...

  • Bolens 12229 - page 16

    16 Section 4: Operation The tines have a self-clearing action which eliminates most tangling of debris in the tines. However, occasionally dry grass, stringy stalks or tough vines may become tangled. Follow these procedures to help avoid tangling and to clean the tines, if necessary. • To reduce tangling, set the depth regulator deep enough to ge ...

  • Bolens 12229 - page 17

    Figure 5-1: Tine shields removed for clarity. Maintenance 5 Section 17 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can resu ...

  • Bolens 12229 - page 18

    18 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING 4. The gear oil level is correct ...

  • Bolens 12229 - page 19

    Section 5: Maintenance 19 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING CHECKING AND ADJUSTING FORWARD DR ...

  • Bolens 12229 - page 20

    20 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING FORWARD CLUTCH BAIL ADJUSTMENT If ...

  • Bolens 12229 - page 21

    Section 5: Maintenance 21 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING CARBURETOR/GOVERNOR CONTROL ADJUS ...

  • Bolens 12229 - page 22

    22 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. WARNING TROUBLESHOOTING Before performing ...

  • Bolens 12229 - page 23

    Model 12229 Parts List 23 DRA WING NO. 1 1 9552 Hex Hd. Flange Screw, Self-Tapping, 1/4-20 x 1/2 ................................... 2 3 1916417 Decal - Read Owner ’ s Manual ............. 1 5 1918705 Tine Hood (Incl. tine flap and Ref. 3) ............................................. 1 6 1100088 Hex Hd. Screw, 5/16-18 x 1/2 ............. 2 7 118 ...

  • Bolens 12229 - page 24

    Model 12229 24 Parts List DRA WING NO. 2 ...

  • Bolens 12229 - page 25

    Model 12229 Parts List 25 P ARTS LIST - DRA WING NO. 2 REF. PART No. No. DESCRIPTION QTY. REF. PART No. No. DESCRIPTION QTY. 1 55104 Upper Handlebar (Incl. Ref. 2) ............ 1 2 1916928 Decal, Forward Clutch Bail .................. 1 3 1100799 Hex Hd. Screw, 5/16-18 x 1-1/2 .......... 6 4 1100806 Hex Hd. Screw, 1/4-20 x 1-1/4 ............ 1 5 55 ...

  • Bolens 12229 - page 26

    Model 12229 26 Parts List DRA WING NO. 4 REF. PART No. No. DESCRIPTION QTY. REF. PART No. No. DESCRIPTION QTY. 1 9512 Retainer, Snap Ring, “ E ” Type ........... 2 2 9511 Retainer, Snap Ring .......................... 4 3 1166-1 Shim, 0.062" thick ............................. A/R 1166-2 Shim, 0.030" thick ............................ ...

  • Bolens 12229 - page 27

    Model 12229 Parts List 27 DRA WING NO. 5 1 9727 Plug, Transmission Oil Fill .................. 1 2 1186328 Hex Hd. Flange Screw, 5/16-18 x 5/8, Grade 5 .......................................... 8 5 1916641001 Front Cover, Transmission .................. 1 5A 50074 Rear Cover, Transmission ................... 1 6 50032 Gasket, Housing Cover ....... ...

  • Bolens 12229 - page 28

    Model 12229 28 Parts List 44 11 45 13 30 46 47 15 10 26 12 25 21 36 15, 47 30 28 24 22 17 27 32 34 34 16 18 3 8 7 7 23 31 9 20 35 3 2 5 6 14 7 3 3 24 4 17 1 Forward Clutch Cable DRA WING NO. 6 ...

  • Bolens 12229 - page 29

    Model 12229 Parts List 29 P ARTS LIST - DRA WING NO. 6 1 * Engine, Recoil Start ............................. 1 2 1917326001 Bracket, Belt Cover.............................. 1 3 1100242 Lock Washer, 5/16 ............................. 8 4 1111696 Hex Hd. Screw, 5/16-24 x 1/2 ............ 2 5 1916419 Decal, Hot Surfaces Warning ............. 1 6 191 ...

  • Bolens 12229 - page 30

    Model 12229 30 Parts List DRA WING NO. 7 RIGHT SIDE LEFT SIDE Left Hand Tine Right Hand Tine Hold Tine With Blunt End Toward You NOTE: Identify Left and Right sides of tiller by standing in operator position and facing direction of forward travel. ...

  • Bolens 12229 - page 31

    Model 12229 Parts List 31 P ARTS LIST - DRA WING NO. 7 1 9711 Hex Hd. Screw, 3/8-16 x 1, Grade 5 ...... 16 2 50049-01 Bolo Tine - Right Hand. Single tine used on left side of tiller. (Incl. two each Refs. 1 & 3) ....................................... 8 3 1733398 Hex Lock Nut, 3/8-16 ............................ 18 4 9555 Hex Hd. Screw, 3/8-16 ...

  • Bolens 12229 - page 32

    CUSTOMER SERVICE INFORMA TION Owner Registration Card Please fill out and mail the enclosed owner registration card. The purpose of this card is to register each unit at the Factory so that we can provide you with warranty benefits and informational bulletins. Warranty Service The warranty statement is included in the unit ’ s literature package. ...

Produzent Bolens Kategorie Tiller

Dokumente, die wir vom Produzenten des Geräts Bolens 12229 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Bolens
- Bedienungsanleitungen 12229
- Produktkarten Bolens
- Informationsbroschüren
- oder Energieetiketten Bolens 12229
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Bolens 12229.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Bolens 12229, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Bolens 12229. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Bolens 12229 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Bolens 12229, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Bolens 12229 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Bolens 12229 verständlich ist.

Eine gänzliche Bedienungsanleitung von Bolens sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Bolens 12229 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Bolens 12229 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Bolens 12229, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Bolens 12229 - die uns die ersten Schritte während der Nutzung von Bolens 12229 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Bolens 12229 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Bolens 12229 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Bolens 12229?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Bolens 12229 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Bolens 12229 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)