Deutsch dropdown-ico

Bedienungsanleitung Axis Communications Q6045-C PTZ

67 Seiten 1.43 mb
Download

Zur Seite of 67

Summary
  • Axis Communications Q6045-C PTZ - page 1

    AXIS Q6045-C PTZ Dome Network Camera User Manual ...

  • Axis Communications Q6045-C PTZ - page 2

    About this Document This manual is intended for administrators and users of the AXIS Q6045-C PTZ Dome Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-b ...

  • Axis Communications Q6045-C PTZ - page 3

    Disposal and Recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal ...

  • Axis Communications Q6045-C PTZ - page 4

    AXIS Q6045-C PTZ Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications Q6045-C PTZ - page 5

    AXIS Q6045-C PTZ Dome Network Camera T able of Contents P orts & Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Support . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications Q6045-C PTZ - page 6

    AXIS Q6045-C PTZ Dome Network Camera Hardware Overview Hardware Overview Camera 1 2 3 4 5 6 7 8 1 Network connector (High P oE) 2 P art number (P/N) & Serial number (S/N) 3 Cooling system 4 Fan 5 SD card slot 6 P ower button 7 Status LED indicator 8 Control button Important Dust and particle buildup could affect the performance of the cooling s ...

  • Axis Communications Q6045-C PTZ - page 7

    AXIS Q6045-C PTZ Dome Network Camera Hardware Overview Multi-connector Terminal connector for connecting the supplied media converter switch, which provides the following signals: • DC P ower • Network (Ethernet 1 0/1 00Base-T) • Input/Output (I/O) The supplied multi-connector cable is required in order to maintain the product’s IP rating, ...

  • Axis Communications Q6045-C PTZ - page 8

    AXIS Q6045-C PTZ Dome Network Camera Hardware Overview Media Converter Switch 1 2 3 4 5 6 7 8 10 9 1 1 1 2 1 3 1 P ower connector (DC input) 2 P ower connector (DC output) 3 Network connector (internal) 4 Network slot SFP (external) (2x) 5 Network connector RJ45 (external) (2x) 6 Camera LED indicator 7 Network LED indicator (4x) 8 P ower LED indica ...

  • Axis Communications Q6045-C PTZ - page 9

    AXIS Q6045-C PTZ Dome Network Camera Hardware Overview Network slot SFP (external) - T wo SFP slots (1 00Base-FX/1 000Base-X) for network connectivity . Each RJ45 and SFP port has its own dip switch. The dip switches control how the port forwards data. See Network Connector Dip Switches . Dip switch position Description of use Default (middle) B Wh ...

  • Axis Communications Q6045-C PTZ - page 10

    AXIS Q6045-C PTZ Dome Network Camera Hardware Overview 1 Dip switch position Description Default (middle) B Remove VLAN tags from forwarded multicast packages. Use this setting when connecting to the network, directly or through a router or network switch. Left A Block multicast packages that have a VLAN tag. Use this setting when connecting to a d ...

  • Axis Communications Q6045-C PTZ - page 11

    AXIS Q6045-C PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating syste ...

  • Axis Communications Q6045-C PTZ - page 12

    AXIS Q6045-C PTZ Dome Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 55 . To set the password via a standard HTTP connection, enter it directly in ...

  • Axis Communications Q6045-C PTZ - page 13

    AXIS Q6045-C PTZ Dome Network Camera Access the Product To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Cong . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only . See AXIS Media Contro ...

  • Axis Communications Q6045-C PTZ - page 14

    AXIS Q6045-C PTZ Dome Network Camera Access the Product P an and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. Focus bar – Use the arrows to focus ...

  • Axis Communications Q6045-C PTZ - page 15

    AXIS Q6045-C PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other ...

  • Axis Communications Q6045-C PTZ - page 16

    AXIS Q6045-C PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control ...

  • Axis Communications Q6045-C PTZ - page 17

    AXIS Q6045-C PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 17 ...

  • Axis Communications Q6045-C PTZ - page 18

    AXIS Q6045-C PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to ...

  • Axis Communications Q6045-C PTZ - page 19

    AXIS Q6045-C PTZ Dome Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 19 . • Stream proles. See page 20 . • Camera settings. See page 2 1 . • Overlay image. See page 22 . • Privacy mask. See page 24 . Video Stream Y ou can dene the following video st ...

  • Axis Communications Q6045-C PTZ - page 20

    AXIS Q6045-C PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 P art 1 0/A VC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the difference ...

  • Axis Communications Q6045-C PTZ - page 21

    AXIS Q6045-C PTZ Dome Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the color saturation. The value 1 00 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can ...

  • Axis Communications Q6045-C PTZ - page 22

    AXIS Q6045-C PTZ Dome Network Camera Video Image Settings Autofocus enabled - Automatic focusing is enabled by default. If the focus position is changed manually using the focus bar , autofocus will be disabled even if enabled here. In this case, use the PTZ control panel to enable autofocus, see PTZ Controls on page 13 . If required, the focus con ...

  • Axis Communications Q6045-C PTZ - page 23

    AXIS Q6045-C PTZ Dome Network Camera Video 2. Click Browse and browse to the le. 3. Click Upload . 4. The Transparency Settings page is now displayed: - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Example: To make white transparent, enter #FFFFFF . - To scale the i ...

  • Axis Communications Q6045-C PTZ - page 24

    AXIS Q6045-C PTZ Dome Network Camera Video Privacy Mask A privacy mask is an area of solid color that prohibits users from viewing parts of the monitored area. Privacy masks cannot be bypassed via the VAPIX® Application Programming Interface (API). The Privacy Mask List, Video > Privacy Mask , shows all the masks that are currently congured ...

  • Axis Communications Q6045-C PTZ - page 25

    AXIS Q6045-C PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 25 . • Viewer Settings. ...

  • Axis Communications Q6045-C PTZ - page 26

    AXIS Q6045-C PTZ Dome Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the location specied in the AMC Control P anel. See AXIS Media Control (AMC) on page 15 . User Dened Links To displa ...

  • Axis Communications Q6045-C PTZ - page 27

    AXIS Q6045-C PTZ Dome Network Camera PTZ (Pan T ilt Zoom) PTZ (Pan T ilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position • Focus position • Iris position Preset positio ...

  • Axis Communications Q6045-C PTZ - page 28

    AXIS Q6045-C PTZ Dome Network Camera PTZ (Pan T ilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events and set up an action rule with PTZ Preset Reached or Autotracking as trigger . Note Autotracking The Axis product can detect movement in the eld of view , for ex ...

  • Axis Communications Q6045-C PTZ - page 29

    AXIS Q6045-C PTZ Dome Network Camera PTZ (Pan T ilt Zoom) 90° - 90° - 180°/ 180° 0° 90° - 90° - 180°/ 180° 0° A B B A 1 2 Top view A P an limit start B Pan limit end Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congurable time periods. The e ...

  • Axis Communications Q6045-C PTZ - page 30

    AXIS Q6045-C PTZ Dome Network Camera PTZ (Pan T ilt Zoom) 1. Go to PTZ > Guard Tour and click Add . 2. Select Create a record tour and click OK . 3. Enter a descriptive name. 4. Specify the pause length between runs. 5. Click to start recording the P an/Tilt/Zoom movements. 6. When satised, click . 7. Click OK . Note Only the name of the reco ...

  • Axis Communications Q6045-C PTZ - page 31

    AXIS Q6045-C PTZ Dome Network Camera PTZ (Pan T ilt Zoom) The P anel Shortcut Command Buttons list shows the user-dened buttons that can be accessed from the Live View page’s Ctrl panel . These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface. Click Add to add a new shortcut co ...

  • Axis Communications Q6045-C PTZ - page 32

    AXIS Q6045-C PTZ Dome Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object. Use the Shock sensitivity slider to adjust the sensitivity level at which the product should send an alarm upon being hit. Low sensiti ...

  • Axis Communications Q6045-C PTZ - page 33

    AXIS Q6045-C PTZ Dome Network Camera Detectors P arameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (1 00%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection fo ...

  • Axis Communications Q6045-C PTZ - page 34

    AXIS Q6045-C PTZ Dome Network Camera Detectors Drawing Opacity - Use this slidebar to dene how transparent the area of interest shape should be. Note that, this change will not be saved. See the online help for more information. Fence Detector Fence Detector is used to trigger an alarm if an object crosses a virtual line. Fence Detector provides ...

  • Axis Communications Q6045-C PTZ - page 35

    AXIS Q6045-C PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available application ...

  • Axis Communications Q6045-C PTZ - page 36

    AXIS Q6045-C PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 36 ...

  • Axis Communications Q6045-C PTZ - page 37

    AXIS Q6045-C PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an acti ...

  • Axis Communications Q6045-C PTZ - page 38

    AXIS Q6045-C PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 35 . • Detectors - Live Stream Accessed – Trigger the rule when any stream is accessed and during ed ...

  • Axis Communications Q6045-C PTZ - page 39

    AXIS Q6045-C PTZ Dome Network Camera Events - System Ready – T rigger the rule when the product has been started and all services are running. This can for example be used to send a notication when the product restarts. • Time - Recurrence – Trigger the rule periodically . See Set Up Recurrences on page 4 1 . This can for example be used t ...

  • Axis Communications Q6045-C PTZ - page 40

    AXIS Q6045-C PTZ Dome Network Camera Events Recipient Use with action Email 1 Send Images Send Notication Send Video Clip FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Network Share 2 Send Images Send Video Clip TCP Send Notication 1. An email recipient ...

  • Axis Communications Q6045-C PTZ - page 41

    AXIS Q6045-C PTZ Dome Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below . To create a new schedule: 1. Go to Events > Schedules a ...

  • Axis Communications Q6045-C PTZ - page 42

    AXIS Q6045-C PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 42 . • To set up action rules, see page 37 . • To access recordings, see Recording List on page 42 . • To congure camera controlled storage ...

  • Axis Communications Q6045-C PTZ - page 43

    AXIS Q6045-C PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language butt ...

  • Axis Communications Q6045-C PTZ - page 44

    AXIS Q6045-C PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anyb ...

  • Axis Communications Q6045-C PTZ - page 45

    AXIS Q6045-C PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the d ...

  • Axis Communications Q6045-C PTZ - page 46

    AXIS Q6045-C PTZ Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. 2. G ...

  • Axis Communications Q6045-C PTZ - page 47

    AXIS Q6045-C PTZ Dome Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network a ...

  • Axis Communications Q6045-C PTZ - page 48

    AXIS Q6045-C PTZ Dome Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the Installation and Management Software CD or the document A ...

  • Axis Communications Q6045-C PTZ - page 49

    AXIS Q6045-C PTZ Dome Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP serv ...

  • Axis Communications Q6045-C PTZ - page 50

    AXIS Q6045-C PTZ Dome Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selec ...

  • Axis Communications Q6045-C PTZ - page 51

    AXIS Q6045-C PTZ Dome Network Camera System Options To enable and congure SNMP in the Axis product, go to the System Options > Network > SNMP page. Depending on the level of security required, select the version on SNMP to use. Traps are used by the Axis product to send messages to a management system on important events and status changes ...

  • Axis Communications Q6045-C PTZ - page 52

    AXIS Q6045-C PTZ Dome Network Camera System Options Storage SD Card NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www .axis.com The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC o ...

  • Axis Communications Q6045-C PTZ - page 53

    AXIS Q6045-C PTZ Dome Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Open the Axis product’s webpages and go to Setup > System Options > Storage . 3. Click SD Card . 4. Click Format and select the desired le system. 5. Click OK to start formatting the card. Network Share Network share allows you to add networ ...

  • Axis Communications Q6045-C PTZ - page 54

    AXIS Q6045-C PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factory default values. The following settings are not a ...

  • Axis Communications Q6045-C PTZ - page 55

    AXIS Q6045-C PTZ Dome Network Camera System Options Crash Report - Generates an archive with debugging information. The report takes several minutes to generate. The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Conguration . The Access Log can be congured to list all c ...

  • Axis Communications Q6045-C PTZ - page 56

    AXIS Q6045-C PTZ Dome Network Camera System Options 4. The process is now complete. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90 5. Using the installation and management software tools, assign an IP address, set the password and access the video str ...

  • Axis Communications Q6045-C PTZ - page 57

    AXIS Q6045-C PTZ Dome Network Camera Multi-Connector Cable Multi-Connector Cable The supplied multi-connector cable is required in order to maintain the camera’s IP rating. The multi-connector cable is connected to the camera’s multi-connector , see Hardware Overview on page 6 . The wires are connected to the supplied media converter switch, se ...

  • Axis Communications Q6045-C PTZ - page 58

    AXIS Q6045-C PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem ...

  • Axis Communications Q6045-C PTZ - page 59

    AXIS Q6045-C PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try ...

  • Axis Communications Q6045-C PTZ - page 60

    AXIS Q6045-C PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the clie ...

  • Axis Communications Q6045-C PTZ - page 61

    AXIS Q6045-C PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . To identify the source of the problem, check the System Log under System Options > Support > Logs & ...

  • Axis Communications Q6045-C PTZ - page 62

    AXIS Q6045-C PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS Q6045-C 60 Hz AXIS Q6045-C 50 Hz Image sensor 1/3” Progressive scan CMOS Lens f 4.45 – 89 mm F1.6 – 2.9 Autofocus Automatic day/night Horizontal angle of view: 62.98° – 3.49° V ertical angle of view: 3 ...

  • Axis Communications Q6045-C PTZ - page 63

    AXIS Q6045-C PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications available at www .axis.com ONVIF , specications available at www .onvif.org AXIS ...

  • Axis Communications Q6045-C PTZ - page 64

    AXIS Q6045-C PTZ Dome Network Camera T echnical Specifications Function/group Item Specications EN 55024 EN 50 12 1-4, IEC 62236-4 FCC P art 15 Subpart B Class A ICES-003 Class A VCCI Class A C-tick AS/NZS CISPR 22 Class A IEC/EN/UL 60950-1 IEC/EN/UL 60950-22 IEC/EN 60529 IP66 NEMA 250 Type 4X IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, IEC 6 ...

  • Axis Communications Q6045-C PTZ - page 65

    AXIS Q6045-C PTZ Dome Network Camera T echnical Specifications • Heavy network utilization due to poor infrastructure. Bandwidth affected. • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected. Connectors SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use ...

  • Axis Communications Q6045-C PTZ - page 66

    AXIS Q6045-C PTZ Dome Network Camera T echnical Specifications Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC input 12 V DC 2 P ower in from power supply (sold separately) Max load = 7 A 12.0–13.2 V DC, min 75 W I/O terminal connector 6-pin terminal blocks for: • Digital Input/Output • P ower (DC output) • 0 V DC (-) 2 1 4 3 6 5 ...

  • Axis Communications Q6045-C PTZ - page 67

    User Manual V er . M4.2 AXIS Q6045-C PTZ Dome Network Camera Date: July 20 14 © Axis Communications AB, 20 14 P art No. 59040 ...

Produzent Axis Communications Kategorie Security Camera

Dokumente, die wir vom Produzenten des Geräts Axis Communications Q6045-C PTZ erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Axis Communications
- Bedienungsanleitungen Q6045-C PTZ
- Produktkarten Axis Communications
- Informationsbroschüren
- oder Energieetiketten Axis Communications Q6045-C PTZ
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Axis Communications Q6045-C PTZ.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Axis Communications Q6045-C PTZ, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Axis Communications Q6045-C PTZ. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Axis Communications Q6045-C PTZ ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Axis Communications Q6045-C PTZ, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Axis Communications Q6045-C PTZ hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Axis Communications Q6045-C PTZ verständlich ist.

Eine gänzliche Bedienungsanleitung von Axis Communications sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Axis Communications Q6045-C PTZ bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Axis Communications Q6045-C PTZ befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Axis Communications Q6045-C PTZ, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Axis Communications Q6045-C PTZ - die uns die ersten Schritte während der Nutzung von Axis Communications Q6045-C PTZ erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Axis Communications Q6045-C PTZ hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Axis Communications Q6045-C PTZ im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Axis Communications Q6045-C PTZ?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Axis Communications Q6045-C PTZ nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Axis Communications Q6045-C PTZ hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)