-
Pelco C1902M (11/96) - page 1
CC4600 Series 1/3-inch Color Cameras Installation/Operation Manual C1902M (11/96) ® Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981 FAX (800) 289-9150 or (1-559) 292-3827 International Customers call (1-559) 292-1981 or FAX (1-559) 348-1120 ...
-
Pelco C1902M (11/96) - page 2
20 Pelco Manual C1902M (1 1/96) TABLE OF CONTENTS Section Page 1.0 IMPORT ANT SAFEGUARDS ............................................................................................................. 1 1.1 FCC INFORMA TION ................................................................................................................ 2 1.2 SAFETY PR ...
-
Pelco C1902M (11/96) - page 3
Pelco Manual C1902M (1 1/96) 1 1.0 IMPORT ANT SAFEGUARDS 1. Read Instructions - All the safety and operating instruc- tions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed W arnings - All warnings on the unit and in the oper- ating instructio ...
-
Pelco C1902M (11/96) - page 4
2 Pelco Manual C1902M (1 1/96) CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN 1.1 FCC INFORMA TION For USA customers W ARNING - This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ...
-
Pelco C1902M (11/96) - page 5
Pelco Manual C1902M (1 1/96) 3 2.0 DESCRIPTION The CC4600 series cameras are compact, rugged, full performance general purpose color CCD cameras. Contempo- rary styling and concealed controls allow these cameras to blend naturally into the most modern installation sites. These cameras are 1/3-inch image format and are available in the following mod ...
-
Pelco C1902M (11/96) - page 6
4 Pelco Manual C1902M (1 1/96) 2.1 LOCA TION AND FUNCTION OF P A R T S 2.1.1 Top/Front/Side (Illustration A ) Focal length adjustment ring and locking screw Use this ring to adjust the focal length (the dis- tance between the lens mounting plane and the image plane). Use the locking screw to lock the focal length. Lens mount Use to mount an appropr ...
-
Pelco C1902M (11/96) - page 7
Pelco Manual C1902M (1 1/96) 5 B 6 13 7 8 9 10 11 12 14 16 17 18 17 18 15 13 2.1.2 Rear (Illustration B ) SYNC switch Use this switch to set the camera synchronization mode—line lock (L.L) or internal (INT). AGC (automatic gain control) ON/OFF switch The automatic gain function automatically adjusts picture gain in accordance with the brightness ...
-
Pelco C1902M (11/96) - page 8
6 Pelco Manual C1902M (1 1/96) Figure 2 . Rear Panels: CC4600-2/-2X and CC4600-3 3.0 POWER SUPPL Y CONSIDERA TIONS Use only the recommended power supplies. Improper substitutions may damage the camera or cause a shock or fire hazard. CC4600-2/2X • The CC3300-2 must always be operated with a 24 V AC, Class 2 (60 Hz) power supply (not supplied). A ...
-
Pelco C1902M (11/96) - page 9
Pelco Manual C1902M (1 1/96) 7 Figure 3. T ypical 120 V AC to 24 V AC (60 Hz) Power Supply T ypical P ower Supply T o 24 V AC T er minals On Camera 24 V AC Output Input 120 V AC , 60 Hz • 230 V AC power source: The 24 V AC CC4600-2X and the 230 V AC CC4600-3 must be wired to a 50 Hz source. Figure 4 . T ypical 230 V AC to 24 V AC (50 Hz) Power Su ...
-
Pelco C1902M (11/96) - page 10
8 Pelco Manual C1902M (1 1/96) Figure 5 . Standard Acceptable Lens Dimensions 4.0 mm Max Thread (0.16" Max.) F or CS Lens 22.4 mm Max. (0.88" Max.) 9.0 mm Max. Thread (0.35" Max) F or C Lens Lens 4.0 LENSES 4.1 LENS LIMITS Lenses exceeding the dimensions shown in Figure 5 below cannot be used. When the lens is not mounted on the came ...
-
Pelco C1902M (11/96) - page 11
Pelco Manual C1902M (1 1/96) 9 D Auto Iris Plug Pin-out (Back of Plug) 42 1 3 Changing the Plug on an Auto Iris Lens Cable 4.3 LENS INST ALLA TION 4.3.1 Auto Iris Install an auto-iris lens as follows: (Refer to Illustration E ) 1. Unscrew lens mount cap. 2. Screw in the lens. NOTE: When attaching a C-mount type lens, be sure to turn the C/CS adjust ...
-
Pelco C1902M (11/96) - page 12
10 Pelco Manual C1902M (1 1/96) Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the # the more closed the iris is IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small variations in light levels. Normal ...
-
Pelco C1902M (11/96) - page 13
Pelco Manual C1902M (1 1/96) 11 LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUTO IRIS A B • T urn Manual Iris ring so iris is fully open and set the Fo- cus ring for ∞ (or dis- tant object). • Adjust Backfocus the same as was done for V ari- able Light conditions ex- cept CCD iris is left in the OFF position; th ...
-
Pelco C1902M (11/96) - page 14
12 Pelco Manual C1902M (1 1/96) Backfocusing MANUAL IRIS AUTO IRIS A B • Set all other switches on the back of the Camera to the left (deactivated or OFF ), in- cluding the CCD Iris switch. • This step is the same as the one for DC SERVO, excpt that the AUTO IRIS VIDEO/ DC switch is set to VIDEO, both models. CC4600 Series CC3300 Series **With ...
-
Pelco C1902M (11/96) - page 15
Pelco Manual C1902M (1 1/96) 13 CAUTION: When mounting the lens, loosen the securing nut on the side and turn the focal length adjustment to the C position. Mounting a C- mount lens with the adjustment ring in the CS position may dam- age the optical filter . E 1 3 2 4 5 Fitting the Lens ...
-
Pelco C1902M (11/96) - page 16
14 Pelco Manual C1902M (1 1/96) 5.0 CAMERA INST ALLA TION A TTENTION: Installation should be per- formed by qualified service personnel only , in accordance with the National Electrical Code or equivalent/applicable local codes. When attaching the camera to a ceiling bracket or tri- pod, attach the supplied mounting bracket. The bracket may be atta ...
-
Pelco C1902M (11/96) - page 17
Pelco Manual C1902M (1 1/96) 15 G 3 1 2 4 -90 ° 0 ° +90 ° -90 ° 0 ° +90 ° H Phase Adjustment V ertical Phase 5.3 V er tical Phase (Illustration H ) V ertical phase adjustment is NOT vertical ROLL ad- justment. Each camera is adjusted to the AC zero cross- over point at the factory . Problems arise,however , (es- pecially in larger systems) wh ...
-
Pelco C1902M (11/96) - page 18
16 Pelco Manual C1902M (1 1/96) 7.2 CARE OF THE UNIT • Remove dust or dirt on the surface of the lens or CCD with a blower . • Use a soft, dry cloth to clean the body . If it is very dirty , use a cloth dampened with a small quantity of a neutral detergent, then wipe dry . • A void using volatile solvents such as thinner, al- cohol, benzene a ...
-
Pelco C1902M (11/96) - page 19
Pelco Manual C1902M (1 1/96) 17 9.0 SPECIFICA TIONS Image Device: 1/3" interline transfer type CCD Effective Picture Elements: CC4600-2: 768 (horizontal) x 494 (vertical) CC4600-2X/ CC4600-3: 752 (horizontal) x 582 (vertical) Lens Mount: C-mount/CS-mount adjustable Signal System: CC4600-2: NTSC/EIA color system CC4600-2X/ CC4600-3: PAL/CCIR co ...
-
Pelco C1902M (11/96) - page 20
18 P elco Manual C1902M (11/96) 10.0 WARRANTY AND RETURN INFORMA TION PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR ...
Haben Sie eine Frage bezüglich Pelco C1902M (11/96)?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco C1902M (11/96) nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco C1902M (11/96) hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.